汽油—液化石油气（LPG）两用燃料发动机的研究

介绍了汽油－液化石油气（LPG）两用燃料发动机空燃比的调节和作者研制成功的无混合器式双蒸发器LPG供气系统,该供气系统取消了LPG发动机惯用的混合器,在原机双腔化油器的主、副腔喉管处钻孔,接入LPG主供气系和LPG加浓系,从而取消了混合器,解决了全负荷时动力性与部分负荷时燃料经济性、排放之间的矛盾,取得了良好的效果。用该系统改装的汽油－LPG两用燃料发动机,在燃用汽油时性能无任何变化,燃用LPG时取得了动力性、燃料经济性和排放指标俱佳的效果。     

LPG进气道液态喷射的实验研究

设计了LPG低压液态喷射的燃料供应系统和控制系统，对LPG进气道液态喷射进行了实验研究，将液态喷射与气态喷射及燃用汽油时的动力性，排放作了对比，研究了空燃比对LPG液态喷射发动机性能的影响。结果表明：采用液态喷射方式具有良好的动力性，与燃用汽油相比污染物排放得到很大改善，与气态喷射相比HC排放量略有上升，NOx下降，空燃比对发动机性能的影响与燃用汽油时基本一致。     

LPG-汽油双燃料发动机试验研究

选用澳华液化石油气（LPG）有限公司生产的汽车用石油气燃料供给管理配于EQ6100－I型发动机，改装成LPG－汽油双燃料发动机，进行性能测试分析。试验结果表明，在不改变原机压缩比和点火提前角时，燃用液化石油气的动力性下降，最大功率为原机的90％；最大扭矩为原机的92％。燃用LPG比燃用汽油的当量比油耗低，节能率在5％左右。怠速排放试验表明，燃用LPG的CO，HC排放浓度分别为燃用贩50％和36％。     

小型发动机燃用汽油、乙醇和LPG燃料的排放对比

对125mL发动机燃用汽油、乙醇和液化石油气(LPG)时的过量空气系数和点火提前角与排放性能之间的关系进行了试验研究．指出了影响这三种燃料发动机排放性能的敏感参数的合理取值范围．通过对比试验，验证了发动机燃烧乙醇可降低NOx排放浓度．发动机燃烧LPG时，低HC排放的空燃比范围比其它两种发动机空燃比范围广．研究结果可为小型汽油、乙醇和LPG发动机参数匹配提供参考。     

492Q汽油机燃用液化石油气质NOx排放规律的试验研究

介绍了在492Q汽油机上燃用液化石油气（LPG）的台架试验结果，得到了其在中高转速下NOx排放同空燃比、负荷以及点火提前角等参数之间的关系，并将试验结果同汽油机进行了对比。试验结果表明，汽油发动机机在燃用LPG燃料时，NOx排放会有所增加，需要采取某些措施来加以抑制。     

车用电控汽油机改装LPG发动机试验研究

对Santana2000AIR型电控汽油机改装为LPG／汽油两用燃料发动机进行了试验研究。结果表明：燃用LPG较燃用汽油最大功率降低6％,最大扭矩降低12％;节能率最大可达9％,污染物排放中HC,NO,和CO最大降低分别为60.9％,70.6％和86.3％。通过分析比较,提出LPG发动机的改进方法。     

轻便摩托车发动机燃用液化石油气与排气催化净化研究

本文对燃用液化石油气(LPG)加配金属载体的稀土贵金属催化净化装置的幸福XF135QMA-2轻便摩托车发动机的排放特性进行了试验研究，并与燃用汽油的排放特性进行了比较。结果表明：与燃用汽油相比，LPG能使摩托车发动机CO、HC排放有效降低，加配催化净化技术后能进一步降低排放。     

电控汽油机改装LPG发动机试验研究

对Santana2000AJR型电控汽油机改装为LPG/汽油两用燃料发动机进行了试验研究。结果表明:燃用LPG较燃用汽油,最大功率降低6%,最大扭矩降低12%。节能率最大可达9%,污染物排放中HC、NOx和CO最大降低分别为60.9%、70.6%和90%。通过分析比较,提出LPG发动机的改进方法。     

CA6102汽油机双种燃料供给系统的研制

本文对ＣＡ６１０２汽油机改装成汽油－天然气两用燃料发动机的燃料供给系统所采用的方案进行了详细的介绍，并且对燃用双种燃料发动机的性能进行了试验研究和较深入地分析与论述。     

CA6102 汽油机双种燃料供给系统的研制

本文对ＣＡ６１０２汽油机改装成汽油－天然气两用燃料发动机的燃料供给系统所采用的方案进行了详细的介绍，并且对燃用双种燃料发动机的性能进行了试验研究和较深入地分析与论述。     

过热器再热器爆漏事故的原因分析及对策

过热器、再热器爆漏事故严重影响了锅炉机组的安全性和经济性,而造成过热器、再热器爆漏事故的主要因素有超温爆管、磨损、高温腐蚀、热疲劳、质量失控等。通过对这些因素的主要原因和爆口特征的分析,提出了一些过热器、再热器爆漏事故的防治措施。     

具有智能化特征的安全稳定分析与控制决策技术

安全稳定预警与控制辅助决策是智能电网调度技术支持系统不可缺少的应用类功能。在分析安全稳定分析与控制决策计算工作特点的基础上,提出安全稳定分析与控制决策支持智能化的主要特征：自动化和自适应性。介绍了自动化的安全稳定分析计算技术,包括输入数据准备、任务执行和输出结果的自动化处理;阐述了自适应电网运行工况、外部环境和硬件运行状态的安全稳定分析技术,包括调整应用功能的输入数据和妥善处理安全稳定性交互影响,以及根据分析计算任务要求动态优化调度计算资源。这些技术已用于安全稳定综合防御系统,提高了分析结果的适应性和分析计算的效率,在电网运行规划、计划安全校核、超短期安全态势预测、调度操作安全校核和在线分析与控制等电网调度运行管理中发挥作用。     

Hydrophilic and hydrophobic materials and their applications

Wettability of a material’s surface plays a significant role in how fluids interact with such surfaces. Wetting behavior is universal but can vary depending on the chemical nature of the solid and liquid phases. Plants and animals adapt to their environment by having evolved special properties. These properties are such as hydrophilic and hydrophobic. Hydrophilic surface has a strong affinity to water and spreading of water on such surface is preferred. The degree of hydrophilicity of the substance can be measured by measuring the contact angle between the liquid and solid phases. Hydrophobic materials are known as non-polar materials with a low affinity to water, which makes them water repelling. A contact angle of less than 90° indicates hydrophilic interaction where as an angle greater than 90° indicates a hydrophobic interaction. More recently, superwetting such as superhydrophilicity has been receiving an increased focus in the literature due to its potential significance. Superhydrophilic surface has a contact angle of less than 5°.

The fabrication of hydrophilic materials can be carried out in two main ways: depositing molecules on surfaces or modification of surface chemistry. Both methods have been successful historically in achieving their intended purposes. Hydrophobic and superhydrophobic materials can be produced with many fabrication methods such as layer-by-layer assembly, laser process, the solution-immersion method, sol-gen techniques, chemical etching, and Hummer’s method.

The applications of such an important property are significant. For example, hydrophilic surfaces can be used in anti-fogging applications, biomedical, filtration, heat pipes, and many others. Hydrophobic and superhydrophobic materials have been successfully applied in many sectors, such as: (I) the removal of petroleum from aqueous solutions, (II) applied to plastic, ceramics, and mesh to contribute to the oil removal from aqueous solutions, (III) hydrophobic layers have a strong self-cleaning effect on plastics, heat pipes, metals, textiles, glass, paints, and electronics, (IV) hydrophobic layers improve the anti-freezing behavior of heat pipes which prevents unwanted build-up and (V) they function as a water and dust protecting coat on electronics.

The presence of this property is historic but there is still a huge potential for development for its applications in many sectors such as water treatment, heat transfer applications, biomedical devices, and many more.     

Defect and impurity diagnostics and process monitoring

The review focuses on four areas of defect and impurity diagnostics: (i) the determination of parasitic resistances, (ii) quantum efficiency analysis including light-beam-induced current measurement systems which use spectrally resolved currents to determine local recombination in solar cells, (iii) methods to determine the recombination properties in solar cell precursors and (iv) techniques suitable for the recognition of the type of impurity or defect, which is responsible for increased recombination. In general, emphasis is on those methods, which are capable of delivering spatially resolved information. The use of the specific metastability features of a defect for its identification is exemplified. In addition, carrier lifetime spectroscopy methods utilising the temperature or the injection dependence of defect recombination are outlined.     

铁道机车车辆轮轨的摩擦磨损与节能降耗

阐述了铁道机车车辆轮轨摩擦磨损的现状;研究了内燃机车车轮、闸瓦和钢轨的消耗数量及相应的维修费用;指出了采用适当的新技术之后,在节能降耗方面会产生显著的经济效益。     

Hydrogen and electricity from water and light

Four self-driven photoelectrochemical hydrogen producers: n-TiO₂/p-CdTe, n-TiO₂/p-GaP, n-SrTiO₃/p-CdTe and n-SrTiO₃/p-GaP were constructed and examined in 1 M NaOH. the current-potential curves of the individual electrodes and the current-cell voltage relationships were measured. Cell current-density measurements versus time demonstrated that the output of each cell is stable for at least 12 h. the n-SrTiO₃/p-GaP cell under xenon light irradiation was the most efficient at 0·7 per cent. the n-TiO₂/p-GaP cell was estimated as the most efficient under solar light at 0·1 per cent. the stability of p-CdTe and its energy gap of 1·5 eV make it a prospect for use as a photocathode in future photoelectrochemical hydrogen producers.     

能源的开发利用与节能

在节能与环保问题成为当今全球性重要研究课题的情况下,笔者对中国能源的现状、新能源开发问题和在用车辆的环保节能问题进行了研究探讨。认为我国应加大开发可再生能源、核能源的力度,开发城市生活垃圾的新能源,找出在用柴油车实现环保节能的一些新措施。     

国内外能耗监测控制管理理论与实践

能耗监测是能源管理中的重要环节,国外不少国家在这方面都进行了积极的努力,制定了一些相关政策,并取得了一部分研究成果.我国于上世纪90年代初就出台了关于能耗监测的有关规定,2007年颁布的《单位GDP能耗监测体系实施方案》规定了能耗监测的主体、主要内容和指标.工业、交通运输和建筑是我国三大“耗能大户”,因此能耗监测研究和管理实践也主要集中在这三个领域.信息技术的发展为工业企业的能耗监测提供了基础平台,运用计算机信息技术对能耗实行现代化管理,成为企业实现信息化管理、降低成本的一种重要手段.道路交通约占我国交通运输业能耗的75％,因而对道路交通能耗的监测是交通运输业能耗监测的主要任务,而对机车能耗的监测是铁路运输能耗监测的主要内容之一.建筑能耗监测主要针对大型公共建筑,通过信息化手段进行信息采集及能耗监测.目前有关能耗监测的研究还处于起步阶段,尚未全面展开,能耗监测技术还不成熟,监测设备也不齐全.今后除了要继续探索能耗监测技术以外,还应重点加强对主要行业能耗监测控制管理体系的研究.     

The roles of science and technology in energy and environment research and development

Countries are becoming increasingly aware of the importance of science and technology in relation to national development and the necessity of formulating a concise science and technology policy. The need to strengthen and orient the scientific and technological infrastructure in line with national development goals, through more effective use of an available qualified work force and the higher education system, is becoming widely recognized. Consequently, appropriate methods of assessing the impact of science and technology on national development are needed so that efforts are concentrated on areas potentially having substantial impacts. Numerous planning studies have been undertaken to this end, particularly by international organizations such as UNESCO, UNIDO, OECD and IEA. This study examines the inter‐relationships of the disciplines of science and technology with energy and environment research and development (R&D) activities, particularly for developing countries. The connections between these topics are discussed along with some basic methods that can be used to exploit the relations. Some illustrative examples are presented. It is anticipated that the present study will serve as a preliminary step for more comprehensive work by providing an example of the utilization of formal methods in formulating science and technology policy for energy and environment R&D. Copyright © 2001 John Wiley & Sons, Ltd.     

火电厂TSI安装调试及常见故障诊断和处理

火电机组TSI探头的安装与调试是一个较为复杂和精细的工作.是火电厂热控安装不可或缺的最重要的组成部分.文章对各种测量探头的原理进行了分析,理论结合实际,将原理图和现场安装图进行对照,通俗易懂.对这些TSI探头在实际安装时应注意的细节问题做了详尽的阐述,同时对试车过程中出现的问题进行了分析并提出了处理措施.对火电机组汽轮机本体热工仪表安装工作有一定的指导意义.