Synthesis and characterization of light‐absorbing cyclopentadithiophene‐based donor–acceptor copolymers

Cyclopentadithiophene and benzothiadiazole based donor–acceptor polymers are fast emerging as the most promising class of materials for organic solar cells. Here we report on a series of Cyclopentadithiophene and benzothiadiazole based conjugated polymers, namely poly[4,7‐bis(4,4‐dioctyl‐4H‐cyclopenta[2,1‐b;3,4‐b′]dithiophene‐2‐yl)benzo[1,2,5]thiadiazole] (P1), poly[4,7‐bis(4,4‐dioctyl‐4H‐cyclopenta[2,1‐b;3,4‐b′]dithiophene‐2‐yl)benzo[1,2,5]thiadiazole‐alt‐9‐(heptadecan‐9‐yl)‐2,7‐bis(4,4,5,5‐tetramethyl)‐1,3,2‐dioxaborolan‐2‐yl)‐9H‐carbazole] (P2) and poly[4,7‐bis(4,4‐dioctyl‐4H‐cyclopenta[2,1‐b;3,4‐b′]dithiophene‐2‐yl)benzo[1,2,5]thiadiazole‐alt‐5,11‐bis(2‐hexyldecyl)‐3,9‐bis(4,4,5,5‐tetramethyl)‐1,3,2‐dioxaborolan‐2‐yl)‐5,11‐dihydroindolo[3,2‐b]carbazole] (P3), with alternating donor and acceptor units and discuss their photophysical and electrochemical properties. Stille coupling of 2‐tributylstannyl‐4,4‐dioctylcyclopenta[2,1‐b:3,4‐b′]dithiophene with 4,7‐dibromobenzo[1,2,5]thiadiazole generated the alternating donor–acceptor monomer 4,7‐bis(4,4‐dioctyl‐4H‐cyclopenta[2,1‐b;3,4‐b′]dithiophene‐2‐yl)benzo[1,2,5]thiadiazole (CPDT‐BT‐CPDT). Homopolymer P1 of CPDT‐BT‐CPDT was synthesized by oxidative polymerization using FeCl₃. Copolymers P2 and P3 were synthesized by palladium‐catalysed Suzuki polycondensation. The synthesized polymers showed good solubility in common organic solvents, and UV‐visible measurements showed that the absorption maxima of the polymers lie in the range 624 to 670 nm. The energy gaps of these polymers were found to lie in the range 1.29 to 1.50 eV. Gel permeation chromatography measurements against polystyrene standards showed the number‐average molecular weight to be in the range (2.2–6.0) × 10⁴ g mol^?1. Thermogravimetric analysis showed the polymers to possess high thermal stability. A preliminary study of photodiode devices prepared using polymers P1, P2 and P3 when blended with the PC₇₁BM electron acceptor found that P2 is the optimum chemical structure for pursuing further device optimization.© 2015 Society of Chemical Industry     

Dithieno[2,3‐d:2′,3′‐d′]naphtho[2,1‐b:3,4‐b′]dithiophene based medium bandgap conjugated polymers for photovoltaic applications

Three novel medium band gap (MBG) conjugated polymers (CPs) (named as P1, P2, and P3, respectively) were developed by copolymerizing 2,7‐dibromo‐10,11‐di(2‐hexyldecyloxy)dithieno[2,3‐d:2′,3′‐d′]naphtho[2,1‐b:3,4‐b′]dithiophene (NDT‐Br) with three different units: 2,5‐bis(tributylstannyl)thiophene, 2,5‐bis(trimethylstannyl)thieno[3,2‐b]thiophene and trans?1,2‐bis(tributylstannyl)ethene, respectively. The thermal, optical, and electrochemical properties of the polymers were investigated. All of the polymers have good thermal stability and medium band gap (～ 1.9 eV). Prototype bulk heterojunction photovoltaic cells based on the blend P1/P2/P3 and [6, 6] phenyl‐C61 butyric acid methyl ester (PC₆₁BM) were assembled and the photovoltaic properties were assessed. Power conversion efficiencies (PCEs) of 1.61% ～ 2.43% have been obtained under 100 mW cm^?2 illumination (AM1.5). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43288.     

A copolymer based on benzo[1,2-b:4,5-b′]dithiophene and quinoxaline derivative for photovoltaic application

A D–A–D copolymer (PBDTQx) with a bandgap of 1.78 eV, containing alkoxy-substituted benzo[1,2-b:4,5-b′]dithiophene (BDT) as donor and quinoxaline derivative (Qx) as acceptor, was synthesized by Stille coupling reaction. In order to study the photovoltaic property of PBDTQx, polymer solar cells (PSCs) were fabricated with PBDTQx as the electron donor blended with [6,6]-phenyl-C61-butyric acid methyl ester (PC₆₁BM) as the electron acceptor. The power conversion efficiency (PCE) of PSC was 1.01% for an optimized PBDTQx: PC₆₁BM ratio of 1:5, under the illumination of AM 1.5, 100 mW/cm². The results indicated that PBDTQx was a promising donor candidate in the application of polymer solar cells.     

Correlation between the performance of organic bulk‐heterojunction solar cells and the molecular structures of alcohol solvents

Morphology control is an important issue for boosting the performance of organic bulk‐heterojunction (BHJ) solar cells. In this study, we investigated the correlation between alcohol solvents and the morphologies of poly({4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′] dithiophene‐2,6‐diyl}{3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl}) (PTB7) and [6,6]‐phenyl‐C₇₀‐butyric acid methyl ester (PC₇₀BM)‐based organic solar cells by spin‐casting the alcohol onto the active layers. We found that the morphologies strongly depended on the structure of the alcohol [alkyl chain length and hydroxyl (? OH) group position]. Ethanol or 2‐propanol showed the highest performance among the alcohols considered here. Atomic force microscopy images and absorption spectra demonstrated that the alcohols affected the morphologies of PC₇₀BM rather than those of PTB7. The morphologies of PC₇₀BM were dependent on the solubilities of the alcohols to the active layers and the hydrogen‐bonding strengths between the PC₇₀BM and alcohol molecules. Our results indicate that the use of alcohols for solvent annealing is a simple and efficient method for developing high‐performance organic BHJ solar cells. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133 , 44367.     

Effects of thiophene units on substituted benzothiadiazole and benzodithiophene copolymers for photovoltaic applications

Two conjugated copolymers, poly{4,7-[5,6-bis(octyloxy)]benzo(c)(1,2,5)thiadiazole-alt-4,8-di(2-ethylhexyloxyl)benzo[1,2-b:3,4-b]dithiophene} ( P1 ) and poly(2-{5-[5,6-bis(octyloxy)-4-(thiophen-2-yl)benzo(c)(1,2,5)thiadiazol-7-yl] thiophen-2-yl}-4,8-di(2-ethylhexyloxyl)benzo(1,2-b:3,4-b)dithiophene) ( P2 ), composed of benzodithiophene and 5,6-dioctyloxybenzothiadiazole derivatives with or without thiophene units were synthesized via a Stille cross-coupling polymerization reaction. These copolymers are promising for applications in bulk heterojunction solar cells because of their good solubility, proper thermal stability, moderate hole mobility, and low band gap. The photovoltaic properties of these copolymers were investigated on the basis of blends of the different polymer/(6,6)-phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM) weight ratios under AM1.5G illumination at 100 mW/cm². The device with indium tin oxide/poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate)/ P2: PC₇₁BM (1 : 2 w/w)/Ca/Al gave a relatively better photovoltaic performance with a power conversion efficiency of 1.55%. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Subtly adjusted active layer self‐assembly process for efficient organic solar cells

The phase separation degree of active layers plays a vital role in enhancing the power conversion efficiency of organic solar cells. Two post treatments were employed to optimize the phase separation degree of active layers by subtly adjusting the self‐assembly process for SMPV1:PC₇₁BM based active layers (SMPV1, 2,6‐bis[2,5‐bis(3‐octylrhodanine)‐(3,3‐dioctyl‐2,2':5,2''‐terthiophene)]‐4,8‐bis((5‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐b:4,5‐b']dithiophene; PC₇₁BM, [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester). In this work, a power conversion efficiency of 7.93% was obtained for devices with an as‐cast active layer, which is close to the highest values reported for SMPV1 based devices. The power conversion efficiency was further increased to 8.64% or 8.99% for active layers with thermal annealing or thermal annealing together with solvent vapor annealing, respectively. The enhanced performance is mainly attributed to more efficient photon harvesting and charge transport induced by the post annealing treatment of the active layers. The face‐on molecular orientation of SMPV1 is increased for active layers with post annealing treatment, which is beneficial for charge transport along directions perpendicular to the substrate. This work further confirms the positive effect of post annealing treatment on the performance improvement of organic solar cells. © 2019 Society of Chemical Industry     

Synthesis of two D‐π‐A polymers π‐bridged by different blocks and investigation of their photovoltaic property

The synthesis, characterization, photophysical and photovoltaic properties of two 5,6‐bis(octyloxy)benzo[c][1,2,5]thiadiazole‐containing wide‐band‐gap donor and acceptor D‐π‐A alternating conjugated polymers (HSD‐a and HSD‐b) have been reported. These two polymers absorb in the range of 300–700 nm with a band gap of about 1.88 and 1.97 eV. The HOMO energy levels were ?5.44 eV for HSD‐a and ?5.63 eV for HSD‐b. Polymer solar cells with HSD‐b :PC₇₁BM as the active layer demonstrated a power conversion efficiency (PCE) of 2.59% with a high V_oc of 0.93 V, a J_sc of 7.3 mA/cm², and a comparable fill factor (FF) of 0.38 under simulated solar illumination of AM 1.5G (100 mW/cm²) without annealing. In addition, HSD‐a :PC₇₁BM blend‐based solar cells exhibit a PCE of 2.15% with a comparable V_oc of 0.64 V, J_sc of 8.75 mA/cm^?2, and FF of 0.40. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41587.     

Effect of layer thickness on the electrical parameters and conduction mechanisms of conjugated polymer‐based heterojunction diode

In this study, thickness‐dependent current density–voltage (J–V) characteristics obtained for poly{(9,9‐dioctylfluorene)?2,7‐diyl‐(4,7‐bis(thien‐2‐yl) 2‐dodecyl‐benzo[1,2,3] triazole)} (PFTBT) conjugated copolymer based heterojunction diode fabricated on ITO were investigated in terms of electrical characteristics. In order to analyze J –V plots with ITO/PEDOT:PSS/PFTBT:PC₆₁BM/LiF/Al configuration, the thickness‐dependent J–V measurements were applied in the thickness range between 90 and 200 nm. The effect of PFTBT:PC₆₁BM layer thickness on the forward J –V characteristics were investigated by evaluating electrical parameters such as zero bias barrier height (Φ_Bo), ideality factor (n ), shunt resistance (R _sh), series resistance (R_s ), the interface states density (N _ss), and space‐charge limited mobility. The results show that at PFTBT:PC₆₁BM layer thickness of 90 and 200 nm, ideality factor for ITO/PEDOT:PSS/PFTBT:PC₆₁BM/LiF/Al heterojunction diodes ranged from 2.726 to 3.121 and the thermionic emission over the heterojunction diodes is crucial at low current densities and the intrinsic thermally generated charge carriers controlled the forward current this region of the heterojunction diode. At relatively higher voltage, the current mechanism of ITO/PFTBT:PC₆₁BM/PEDOT:PSS/LiF/Al heterojunction diodes were found to obey a space charge limited (SCLC) conduction mechanism. The values of N_ss and R_s in heterojunction diodes increase with increasing PFTBT:PC₆₁BM layer thickness and effect the main electrical parameters of diodes. In addition, the leakage current of heterojunction diodes are taken and interpreted via Poole‐Frenkel emission and Schottky emission. The leakage current was controlled in ITO/PEDOT:PSS/PFTBT:PC₆₁BM/LiF/Al heterojunction diodes by Poole‐Frenkel emission above 140 nm and by Schottky emission under 140 nm. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44817.     

Design and synthesis of thieno[3,4‐c]pyrrole‐4,6‐dione based conjugated copolymers for organic solar cells

A new series of conjugated copolymers (PBDT‐TPD , PBDT ‐Th‐TPD , PBDT‐TT‐TPD ) containing donor–acceptor (D ? A) structure electron‐rich benzo[1,2‐b :4,5‐b ′]dithiophene (BDT ) units with branched alkyl thiophene side chains and electron‐deficient 5‐(2‐octyl)‐4H ‐thieno[3,4‐c ]pyrrole‐4,6(5H )‐dione (TPD) units was designed and synthesized. To tune the optical and electrochemical properties of the copolymers, the conjugation length of the copolymers was extended by introducing π‐conjugated spacers such as thiophene and thieno[3,2‐b ]thiophene units. It was observed that PBDT‐TPD showed broader absorption spectra in the longer wavelength region and the absorption maximum was red‐shifted compared to that of PBDT‐Th‐TPD, PBDT‐TT‐TPD. Stokes shifts were calculated to be 52 nm for PBDT‐TPD, 153 nm for PBDT‐Th‐TPD and 146 nm for PBDT‐TT‐TPD. Further, PBDT‐TPD exhibited a deeper highest occupied molecular orbital energy level of ?5.53 eV as calculated by cyclic voltammetry. Bulk heterojunction solar cells fabricated using PBDT‐TPD as donor material exhibited a power conversion efficiency of 1.92%. © 2017 Society of Chemical Industry     

Synthesis and characterization of thieno[3,4-c]pyrrole-4,6-dione and pyrrolo[3,4-c]pyrrole-1,4-dione-based random polymers for photovoltaic applications

New random poly{benzo[1,2-b:4,5-b']dithiophene-thieno[3,4-c]pyrrole-4,6-dione-pyrrolo[3,4-c]pyrrole-1,4-dione} (PBDT-TPD-DPP) based on benzo[1,2-b:4,5-b']dithiophene (BDT) as donor and thieno[3,4-c]pyrrole-4,6-dione (TPD, 60–90%), pyrrolo[3,4-c]pyrrole-1,4-dione (DPP, 10–40%) as acceptors were synthesized through Stille coupling reaction. The photophysical, electrochemical and photovoltaic properties of random polymers were investigated. The random polymers with high molecular weight (M_n = 33.5–41.7 kDa) exhibited broad and strong absorption covering the spectra range from 350 nm up to 922 nm with absorption maxima at around 700 nm, the relatively deep highest occupied molecular orbital (HOMO) energy levels vary between ?5.25 and ?5.42 eV and suitable lowest unoccupied molecular orbital (LUMO) energy levels ranging from ?3.85 to ?3.91 eV. Polymer solar cells (PSC) based on these new random polymers were fabricated with device structures of ITO/PEDOT: PSS/random polymers: PC₇₁BM (1:2, w/w)/Ca/Al. The photovoltaic properties of random polymers were evaluated under AM 1.5G illumination (100 mW/cm²). Devices based on the random polymers showed open circuit voltage (V_oc) of 0.71–0.83 V, and power conversion efficiency (PCE) of 0.82–1.80%.     

Effects of high-boiling-point additive 2-Bromonaphthalene on polymer solar cells fabricated in ambient air

High boiling point solvent additive, employed during the solution processing of active layer fabrications, impact the efficiency of bulk heterojunction polymer solar cells (PSC) by influencing the morphological of the active layer. The photovoltaic performances of the PSCs based on the donor of poly{4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]-dithiophene-2,6-diyl-alt-3-fluoro-2-[(2 ethylhexyl)carbonyl] thieno[3,4-b]thiophene-4,6-diy (PTB7) and the acceptor of [6, 6]-phenyl-C71-butyric-acidmethyl-ester (PC₇₁BM) was optimized using 5 vol% high-boiling-point solvent additive of 2-Bromonaphthalene (BN). The optimized air-processed PSC based on PTB7:PC₇₁BM (1:1.5 w/w) with 5 vol% BN exhibited a power conversion efficiency of 7.01% with open-circuit voltage (V _oc) of 0.731 V, short-circuit current density (J _sc) of 13.79 mA cm^?2, and fill factor (FF) of 69.46%. The effects of the additive on photovoltaic performances were illustrated with atomic force microscopy and transmission electron microscope measurements. Our results indicate that the improved efficiency is due to the optimized PTB7/PC₇₁BM interpenetrating network and the enhanced absorption of the active layer using the BN as solvent additive.     

Synthesis and characterization of poly(tetramethylsilarylenesiloxane) derivatives bearing benzodithiophene moieties

Poly(tetramethylsilarylenesiloxane) derivatives bearing benzo[1,2-b;4,5-b′]dithiophene (P1) and benzo[2,1-b;3,4-b′]dithiophene (P2) moieties were prepared via polycondensation of the corresponding disilanol monomers, that is, 2,6-bis(dimethylhydroxysilyl)benzo[1,2-b;4,5-b′]dithiophene (M1) and 2,7-bis(dimethylhydroxysilyl)benzo[2,1-b;3,4-b′]dithiophene (M2), respectively. It was deduced that P1 is a crystalline polymer while P2 is an amorphous one from the results of differential scanning calorimetry (DSC). Bathochromic and hyperchromic effects were observed in the absorption and fluorescence spectra when dimethylsilyl substituents were introduced on the benzo[1,2-b;4,5-b′]dithiophene and benzo[2,1-b;3,4-b′]dithiophene skeletons. The fluorescence quantum yields (Φ_Fs) were not improved by the introduction of dimethylsilyl groups onto the benzo[1,2-b;4,5-b′]dithiophene and benzo[2,1-b;3,4-b′]dithiophene skeletons, whereas the improvement in the Φ_Fs was remarkable in the case of poly(tetramethylsilarylenesiloxane) derivatives that possessed the corresponding fused benzene ring systems, i.e., poly(tetramethyl-2,6-silanthrylenesiloxane) and poly(tetramethyl-1,8-silphenanthrylenesiloxane).     

Phosphate ester side‐chain‐modified conjugated polymer for hybrid solar cells

Although nanocrystals have several advantages of tunable bandgap and high carrier mobility, it is still challenging to achieve high‐performance polymer: nanocrystals hybrid solar cells (HSC) due to the complicated surface problem. Many efforts have been devoted to replace the long alkyl chain on the surface of nanocrystals to improve the charge transfer and transport. Herein, we modified the alkyl chain in poly[2,6–(4,4‐bis (2‐ethylhexyl)?4H‐cyclopenta[2,1‐b;3,4‐b′]‐dithiophene)‐alt ‐4,7–(2,1,3‐benzothiadiazole)] (PCPDTBT) by phosphate ester. Due to its strong affinity to CdSe nanocrystals, the resulting polymers can spontaneously exchange the long chain ligands in one‐step process. With the improved morphology of polymer: CdSe blended film, a power conversion efficiency (PCE) of 3.12% was achieved for hybrid solar cells. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45003.     

Molecular design and density functional theory investigation of novel low‐band‐gap benzobisthiadiazole‐based systems: from monomer to polymer

The electronic structure and properties of benzobisthiadiazole‐based alternating donor–acceptor conjugated oligomers and their periodic copolymers of donor and acceptor units with ratios of 1:1 and 2:1 were investigated systematically using the density functional theory method. The donors include thiophene, thieno[3,2‐b]thiophene and pyrrole. The ratio of donor to acceptor units (D:A ratio) plays a very important role in the geometric and electronic properties. The intramolecular charge transfer increases and the bond length alternation decreases with an increase in the D:A ratio for these oligomers and polymers. Moreover, an increase in D:A ratio can greatly reduce the band gap and effective mass of holes and electrons for these alternating donor‐acceptor conjugated copolymers. The unusually large intramolecular charge transfer caused by intramolecular hydrogen bonds reveals that pyrrole is not only a strong electron donor but also a potential hydrogen bond donor. The theoretical results suggest those copolymers possessing a D:A ratio of 2:1 are better candidates for conducting materials compared to those with a D:A ratio of 1:1. The almost zero band gap, large bandwidth and small effective mass of holes and electrons of poly(4,8‐bis(thieno[3,2‐b]thiophene‐2‐yl)benzo[1,2‐c:4,5‐c′]bis[1,2,5]thiadiazole) indicate that it is a very good candidate for an electrically conductive material. Copyright © 2010 Society of Chemical Industry     

Synthesis and properties of polymer from bis‐3,4‐ethylenedioxythiophene substituted acenaphthenequinoxaline

A new electrochoromic polymer poly(8,11‐bis(3,4‐ethylenedioxy thiophen‐2‐yl)acenaphtho[1,2‐b]‐quinoxaline) (PBEAQ) was synthesized by electrochemical polymerization of the corresponding monomer (BEAQ) in a 0.1 M tetraethylammonium tetrafluoroborate (TEABF₄) dichloromethane–acetonitrile (2 : 1, v : v) solution. The monomer and polymer were characterized by elemental analysis, ¹H‐NMR, IR, and UV‐vis spectroscopy. The electrochemical and optical properties of polymer were investigated by cyclic voltammetry and UV‐vis spectroscopy. Cyclic voltammetry and spectroelectrochemistry studies demonstrated that the polymer can be reversibly reduced and oxidized (both n‐ and p‐doped) between ?2 V and +1.5 V vs. Ag/Ag⁺. The polymer had a transmissive light blue color in the oxidized state and reddish color in the reduced state. Undoped polymer shows UV‐vis absorption peaks at 615 nm in solution, 650 nm in solid state, and has an optical band gap of 1.5 eV. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Impact of alkyl side chain on the photostability and optoelectronic properties of indacenodithieno[3,2‐b]thiophene‐alt‐naphtho[1,2‐c:5,6‐ c′]bis[1,2,5]thiadiazole medium bandgap copolymers

Three donor‐π‐acceptor (D‐π‐A) type alternating conjugated polymers, namely PIDTT‐DTNT‐C16, PIDTT‐DTNT‐HD and PIDTT‐DTNT‐OD bearing the same backbone of indacenodithieno[3,2‐b]thiophene (IDTT) as the D unit and naphtho[1,2‐c:5,6‐c′]bis[1,2,5]thiadiazole (NT) as the A moiety but with different flexible side chain (n‐hexadecyl (C16), 2‐hexyldecyl (HD) and 2‐octyldodecyl (OD)) substituted thiophene employed as π‐bridges, were synthesized and characterized. The effects of the side chain on absorption, photostability, energy levels, aggregation, backbone conformation, morphology and photovoltaic properties were systematically investigated. Because moderate D and strong A units were selected to construct the polymer backbone, a medium optical bandgap (ca. 1.66 eV) and low‐lying highest occupied molecular orbital energy level (E_HOMO ≈ ?5.36 V), thus resulting in a relatively higher open‐circuit voltage (V_OC) of 0.80–0.83 V, were achieved. It was found that the side chain gave rise to an insignificant impact on absorption, aggregation and photostability in chlorobenzene solution and energy levels but a non‐negligible influence on absorption, photostability and aggregation behavior in the film state. It was found that PIDTT‐DTNT‐C16 with the densest and most ordered packing structure exhibited the best photostability. Inverted bulk heterojunction polymer solar cells based on PIDTT‐DTNT‐HD:PC₆₁BM ([6,6]‐phenyl‐C₆₁‐butyric acid methyl ester) showed at least a 1.5‐fold increase in power conversion efficiency, chiefly originating from its slightly improved absorption, more balanced μ_h/μ_e ratio and favorable morphology of the active layer as a result of incorporating branched HD side chains into the IDTT‐alt‐DTNT backbone. © 2019 Society of Chemical Industry     

Synthesis and solar cells applications of EO‐PF‐DTBT polymer

Poly{[2,7‐(9,9‐bis‐(1‐(2‐(2‐methoxyethoxy)ethoxy)ethyl)‐fluorene)]‐alt‐[5,5‐(4,7‐di‐2′‐thienyl‐2,1,3‐benzothiadiazole)]} (EO‐PF‐DTBT) was synthesized by Suzuki coupling reaction. The polymer is soluble in common organic solvent, such as toluene, THF, and chloroform, and it also shows solubility in polar solvent, such as cyclopentanone. Solar cells based on EO‐PF‐DTBT and PC₆₁BM show maximum power conversion efficiency of 2.65% with an open circuit voltage (V_OC) of 0.86 V, a short circuit current density (J_SC) of 6.10 mA/cm², and a fill factor of 51% under AM 1.5G illumination at 100 mW/cm², which is the best results for fluorene and 4,7‐di‐2‐thienyl‐2,1,3‐benzothiadiazole copolymers and PC₆₁BM blend. The 1,8‐diiodooctane can work well to reduce the over‐aggregated phase structure in polymer solar cells. Our results suggest that the introducing high hydrophilic side chain into conjugated polymer donor materials can tune the aggregation structure and improve the solar cells performances. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40478.     

Well‐functioned photovoltaics based on nanofibers composed of PBDT‐TIPS‐DTNT‐DT and graphenic precursors thermally modified by polythiophene,polyaniline and polypyrrole

Reduced graphene oxide nanosheets modified by conductive polymers including polythiophene (GPTh), polyaniline (GPANI) and polypyrrole (GPPy) were prepared using the graphene oxide as both substrate and chemical oxidant. UV–visible and Raman analyses confirmed that the graphene oxide simultaneously produced the reduced graphene oxide and polymerized the conjugated polymers. The prepared nanostructures were subsequently electrospun in mixing with poly(3‐hexylthiophene) (P3HT)/phenyl‐C71‐butyric acid methyl ester (PC₇₁BM) and poly[bis(triisopropylsilylethynyl)benzodithiophene‐bis(decyltetradecylthien)naphthobisthiadiazole] (PBDT‐TIPS‐DTNT‐DT)/PC₇₁BM components and embedded in the active layers of photovoltaic devices to improve the charge mobility and efficiency. The GPTh/PBDT‐TIPS‐DTNT‐DT/PC₇₁BM devices demonstrated better photovoltaic features (J_sc = 11.72 mA cm^?2, FF = 61%, V_oc = 0.68 V, PCE = 4.86%, μ_h = 8.7 × 10^?3 cm² V^–1 s^?1 and μ_e = 1.3 × 10^?2 cm² V^–1 s^?1) than the GPPy/PBDT‐TIPS‐DTNT‐DT/PC₇₁BM (J_sc = 10.30 mA cm^?2, FF = 60%, V_oc = 0.66 V, PCE = 4.08%, μ_h = 1.4 × 10^?3 cm² V^–1 s^?1 and μ_e = 8.9 × 10^?3 cm² V^–1 s^?1) and GPANI/PBDT‐TIPS‐DTNT‐DT/PC₇₁BM (J_sc = 10.48 mA cm^?2, FF = 59%, V_oc = 0.65 V, PCE = 4.02%, μ_h = 8.6 × 10^?4 cm² V^–1 s^?1 and μ_e = 7.8 × 10^?3 cm² V^–1 s^?1) systems, assigned to the greater compatibility of PTh in the nano‐hybrids and the thiophenic conjugated polymers in the bulk of the nanofibers and active thin films. Furthermore, the PBDT‐TIPS‐DTNT‐DT polymer chains (3.35%–5.04%) acted better than the P3HT chains (2.01%–3.76%) because of more complicated conductive structures. © 2019 Society of Chemical Industry     

Cyclization of 1,4‐Phenylenediacrylic Acid with Thionyl Chloride and Subsequent Suzuki–Miyaura Reactions Revisited. The Products are Benzo[1,2‐b;5,6‐b′]dithiophenes and not Benzo[1,2‐b;4,5‐b′]dithiophenes

The reaction of 1,4‐phenylenediacrylic acid with thionyl chloride was reinvestigated. In earlier reports [Liebigs Ann. Chem. 1980 , 1172; Heterocycles 1995 , 41, 2691; Adv. Synth. Catal. 2009 , 351, 2683] it was claimed that 3,7‐dichlorobenzo[1,2‐b;4,5‐b′]dithiophenes were formed in these reactions. Herein, we provide unambiguous evidence that the assignment of these structures is wrong and that, in contrast, 3,6‐dichlorobenzo[1,2‐b;5,6‐b′]dithiophenes are formed. As a consequence, the structures of these parent molecules and of numerous aryl‐substituted derivatives prepared by Pd‐catalyzed cross‐coupling reactions have to be revised. As many of these dithiophenes were reported to show interesting optical, thermal and electronic properties, the theoretical explanations for these properties have to be reconsidered in the light of the corrected structures reported herein. Our structural assignments are based on X‐ray crystal structure analyses of the parent molecules and on NMR spectroscopic studies of the first unsymmetrical derivatives. Besides, mechanistic investigations based on quantum chemical calculations have been carried out which support the formation of the 3,6‐dichlorobenzo[1,2‐b;5,6‐b′]dithiophene isomers.     

Photodegradation mechanism and stabilization of polyphenylene oxide and rigid‐rod polymers

Poly(2,4‐dimethyl‐1,4‐phenylene oxide) (PPO), poly(benzo[1,2‐d:5,4‐d′]bisoxazole‐2,6‐diyl‐1,4‐phenylene) (PBO) and poly(benzo[1,2‐d:4,5‐d′]bisthiazole‐2,6‐diyl‐1,4‐phenylene) (PBZT), which are polymers with extended conjugated structures, undergo a self‐sensitized photo‐induced electron‐transfer reaction. A second component is not required. This article presents many similar observations on these polymers when they are exposed to light and evidence to support the proposed photo‐induced electron‐transfer mechanism. Methods to stabilize these polymers against photo‐oxidation are also described. Workers investigating other conjugated polymeric systems may find the experimental methods, observations and polymer stabilization approaches discussed in this review useful. Copyright © 2005 Society of Chemical Industry