In situ preparation of polyimide/amino‐functionalized carbon nanotube composites and their properties

In order to improve the dispersion of carbon nanotubes (CNTs) in polyimide (PI) matrix and the interfacial interaction between CNTs and PI, 4,4′‐diaminodiphenyl ether (ODA)‐functionalized carbon nanotubes (CNTs‐ODA) were synthesized by oxidation and amidation reactions. The structures and morphologies of CNTs‐ODA were characterized using Fourier transform infrared spectrometer, transmission electron microscopy, and thermal gravimetric analysis. Then a series of polyimide/amino‐functionalized carbon nanotube (PI/CNT‐ODA) nanocomposites were prepared by in situ polymerization. CNTs‐ODA were homogeneously dispersed in PI matrix. The influence of CNT‐ODA content on mechanical properties of PI/CNT‐ODA nanocomposites was investigated. It was found that the mechanical properties of nanocomposites were enhanced with the increase in CNT‐ODA loading. When the content of CNTs‐ODA was 3 wt%, the tensile strength of PI/CNT‐ODA nanocomposites was up to 169.07 MPa (87.11% higher than that of neat PI). The modulus of PI/CNTs‐ODA was increased by 62.64%, while elongation at break was increased by 66.05%. The improvement of the mechanical properties of PI/CNT‐ODA nanocomposites were due to the strong chemical bond and interfacial interaction between CNTs‐ODA and PI matrix. POLYM. COMPOS., 35:1952–1959, 2014. © 2014 Society of Plastics Engineers     

Surface properties and blood compatibility of some aliphatic/aromatic polyimide blends

Two binary polyimide (PI) blends having a common monomer, diamine and dianhydride, were prepared. The first system was composed of PIs obtained from an alicyclic and flexible dianhydride, namely 5‐(2,5‐dioxotetrahydrofurfuryl)‐3‐methyl‐3‐cyclohexene‐1,2‐dicarboxylic acid anhydride (DOCDA) and two aromatic diamines, 4,4′‐oxydianiline (ODA) and p‐phenylenediamine (PPD), respectively. In the second system, ODA was combined with DOCDA and (hexafluoroisopropyldiene)diphtalic dianhydride (6FDA). Incorporation of aliphatic and asymmetric DOCDA moieties, hexafluoropropyldiene groups and ether linkages in the molecular structure of PI blends, poly(DOCDA/PPD)/poly(DOCDA‐ODA) and poly(6FDA‐ODA)/poly(DOCDA‐ODA) influenced the surface tension parameters, surface and interfacial free energy, and the work of spreading of water, maintaining the surface hydrophobic characteristics of both systems. In addition, it has been found out that surface hydrophobicity and surface roughness are properties that can be correlated with the red blood cells and platelets compatibility. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Morphology evolution induced by carbon nanotubes on thermal and mechanical characters of semi-crystalline aromatic polyimide

A series of nanocomposites based on a new semi-crystalline polyimide (PI) and multi-walled carbon nanotubes (MWCNTs) were prepared by in situ polymerization. The TEM measurement reveals the improved dispersion of carboxylic acid-functionalized MWCNTs (COOH-MWCNTs) in semi-crystalline PI compared with pristine MWCNTs. The TGA analysis show that the concentration of carboxylic acid groups on the surface of nanotubes is about 4.34 wt%. The FT-IR spectroscopy analysis indicate that the imide rings of the PI interact non-covalently with nanotubes. The Polarized optical microscopy observation reveals significant morphology evolution in semi-crystalline PI induced by MWCNTs. The SEM micrographs suggest the strong interfacial interaction between COOH-MWCNTs and PI main chains, and significant changes in the fracture surfaces morphology. The WAXRD measurements reveal that COOH-MWCNTs promote the semi-crystalline PI crystallinity and structure change. COOH-MWCNTs can more efficiently improve the mechanical and thermal properties of resulting nanocomposites than pristine MWCNTs. COOH-MWCNT/PI nanocomposites show increases of Young’s modulus and yield strength, as high as 20–30 %, without sacrificing the elongation at break at loadings of 0.5 wt% nanotubes. Furthermore, with increasing the loadings of COOH-MWCNTs to 1.0 wt%, Young’s modulus and yield strength decrease due to nanotube aggregation, but elongation at break increase about 46 %. An abrupt increase of elongation at break in pristine MWCNT/PI nanocomposites was also registered at nanotubes loadings increasing from 0.5 to 1 wt%. These results indicate that the properties of semi-crystalline PI nanocomposites reinforced with carbon nanotubes are not only determined by the dispersion of nanotubes in the PI matrix and their interfacial interactions, but also by the crystalline phase morphology evolution in the PI matrix.     

Synthesis and characterization of polyimide/silica hybrid nanocomposites

Polyimide/silica (PI/SiO₂) hybrid nanocomposites were prepared by the sol‐gel process directly from a soluble polyimide. This soluble PI was synthesized from a diamine with a pendant phenyl hydroxyl group, 4,4′‐diamino‐4″‐hydroxy triphenyl methane (DHTM) and a dianhydride, pyromellitic dianhydride (PMDA), followed by cyclodehydration. Three ways of preparing PI/SiO₂ hybrid nanocomposites were investigated in this study. Two of them used the coupling agent 3‐glycidyloxy propyl trimethoxysilane (GPTMOS) to enhance the compatibility between PI and silica. The coupling agent can react with the PI to form covalent bonds. The structures of the modified hybrid nanocomposites were identified with a FTIR, whereas the size of the silica in polyimides was characterized with a scanning electron microscope. The size of silica particles in the modified system was <100 nm. The covalently bonded PI/SiO₂ hybrid nanocomposites prepared by the novel third approach exhibited good transparency when the silica content was <15%. Moreover, their thermal and mechanical properties exhibited a significant improvement. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 382–393, 2004     

Effects of the aliphatic/aromatic structure on the miscibility,thermal, optical,and rheological properties of some polyimide blends

Two binary polyimide (PI) blends having a common monomer (diamine or dianhydride) were prepared. The first system was composed of PIs obtained from an alicyclic and flexible dianhydride, namely 5‐(2,5‐dioxotetrahydrofurfuryl)‐3‐methyl‐3‐cyclohexene‐1,2‐dicarboxylic acid anhydride (DOCDA) and two aromatic diamines: 4,4′‐oxydianiline (ODA) and p‐phenylenediamine, respectively. In the second system, ODA was combined with DOCDA and (hexafluoroisopropyldiene)diphthalic dianhydride (6FDA). Films of the resulted blends were transparent, suggesting their homogeneity. According to differential scanning calorimetry data, the existence of a single T_g intermediate to those of the pure PIs confirmed the miscibility of blends. Incorporation of aliphatic and asymmetric DOCDA moieties, hexafluoropropyldiene groups and ether linkages in the molecular structure of PIs reduced the charge transfer interactions and significantly increased transparency and optical gap energy, especially for the poly(DOCDA‐ODA)/poly(6FDA‐ODA) blend. These interactions are also reflected in viscosity dependence on shear rate, indicating that they are slightly stronger when the aromatic 6FDA component prevails. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Semi‐aromatic polyimide/Ag nanocomposite derived from vanillin

The development of bioprecursor polyimide/Ag nanocomposites (PI/Ag NCs) is reported in this investigation. Semiaromatic bioprecursor PI was successfully synthesized through direct polycondensation reaction between aromatic diamine containing pyridine ring and aliphatic dianhydride. Aromatic diamine as a monomer was synthesized using a renewable resource, vanillin. The main attractive aspects of this PI are the renewable origin of the diamine, presence of pyridine and high aromatic rings content, as well as aliphatic content on the polymer backbone. The structure of synthesized monomer and PI were proven by FTIR, and nuclear magnetic resonance. The PI/Ag NCs containing 3, 5, and 7 wt % of Ag nanoparticles (Ag NPs) were prepared through solution technique and the resulting NCs were characterized by Fourier transform infrared spectra, wide angle X‐ray diffraction, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). TEM results showed that the Ag NPs were dispersed homogeneously in the PI matrix on nanoscale. TGA results indicated improving in thermal properties of PI/Ag NCs compared to the neat PI due to the interaction between the PI matrix and the Ag NPs. Antibacterial activity of PI/Ag NCs was tested by the disk diffusion method using Escherichia coli as model strain of gram‐negative bacteria. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44001.     

Synthesis and properties of polyimide (containing naphthalene) nanocomposites with organo‐modified montmorillonites

2,7‐Bis(4‐aminophenoxy) naphthalene (BAPN), a naphthalene‐containing diamine, was synthesized and polymerized with a 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) to obtain a polyimide (PI) via thermal imidization. To enhance the thermal and mechanical properties of the polymer, PI–Montmorillonite (MMT) nanocomposites were prepared from a DMAc solution of poly(amic acid) and a DMAc dispersion of MMT, which were organo‐modified with various amounts of n‐dodecylamine (DOA) or cetylpyridium chloride (CPC). FTIR, XRD, and TEM (transmission electron microscopy) were used to verify the incorporation of the modifying agents into the clay structure and the intercalation of the organoclay into the PI matrix. Results demonstrated that the introduction of a small amount of MMT (up to 5%) led to the improvement in thermal stability and mechanical properties of PI. The decomposition temperature of 5% weight loss (T_d,5%) in N₂ was increased by 46 and 36°C in comparison with pristine PI for the organoclay content of 5% with DOA and CPC, respectively. The nanocomposites were simultaneously strengthened and toughened. The dielectric constant, CTE, and water absorption were decreased. However, at higher organoclay contents (5–10%), these properties were reduced because the organoclay was poorly dispersed and resulted in aggregate formation. The effects of different organo‐modifiers on the properties of PI–MMT nanocomposite were also studied; the results showed that DOA was comparable with CPC. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Network behavior of thermosetting polyimide/multiwalled carbon nanotube composites

In previous published research, network formation has been used to understand morphology and properties in polymer nanocomposites containing carbon nanotubes (CNTs) through measurements of rheological and electrical percolation thresholds, largely in thermoplastic matrices. In this research, these tools are explored as a means to understand network transport mechanisms and changes in CNT dispersion during curing in a thermosetting matrix. Specifically, rheological and electrical measurements were performed on the uncured nanocomposites, and electrical measurements were performed on the cured nanocomposites. The resulting data were applied to a percolation model. The results showed that the uncured resin played a limited role in mediating rheological transport and that little CNT aggregation occurred during curing. The results of this initial work suggest that such a combination of techniques is applicable to understanding dispersion changes resulting from curing and provides complementary insight to that provided by electron microscopy imaging of the same phenomenon.     

Preparation and characterization of alkylated carbon nanotube/polyimide nanocomposites

BACKGROUND: The development of carbon nanotube‐reinforced composites has been impeded by the difficult dispersion of the nanotubes in polymers and the weak interaction between the nanofiller and matrices. Efficient dispersion of carbon nanotubes is essential for the formation of a functional nanotube network in a composite matrix. RESULTS: Multiwalled carbon nanotubes (MWNTs) were incorporated into a polyimide matrix to produce MWNT/polyimide nanocomposites. To disperse well the MWNTs in the matrix and thus improve the interfacial adhesion between the nanotubes and the polymer, ‘branches’ were grafted onto the surface of the nanotubes by reacting octadecyl isocyanate with carboxylated MWNTs. The functionalized MWNTs were suspended in a precursor solution, and the dispersion was cast, followed by drying and imidization to obtain MWNT/polyimide nanocomposites. CONCLUSION: The functionalized MWNTs appear as a homogeneous dispersion in the polymer matrix. The thermal stability and the mechanical properties are greatly improved, which is attributed to the strong interactions between the functionalized MWNTs and the polyimide matrix. Copyright © 2009 Society of Chemical Industry     

Effects of crosslinking agents on the physical properties of polyimide/amino‐functionalized graphene oxide hybrid films

The effects of crosslinking agents (crosslinkers) on polyimide (PI)/graphene oxide (GO) hybrid films were extensively investigated. The surface of GO was modified with amino groups using 4‐aminobenzylamine to improve compatibility with pyromellitic dianhydride/4,4′‐oxydianiline PI, and two kinds of crosslinkers were used: tris(4‐aminophenyl)amine and 1,3,5‐triazine‐2,4,6‐triamine (melamine). The mechanical, thermal and optical properties of the PI hybrid films were investigated. In particular, the transparency and physical properties of the PI hybrid films containing amino‐functionalized GO with homogeneous dispersion were improved. As the content of the crosslinker increased, a crosslinking network was formed between the PI chains, and the stiffness of the hybrid films was increased. The glass transition temperature, heat resistance and mechanical properties were also enhanced. The PI hybrids prepared with a rigid crosslinker exhibited higher optical transparency due to the reduction of the intermolecular charge transfer interactions with increasing interchain spacing between the PI chains. © 2018 Society of Chemical Industry     

Synthesis and characterization of polyimide/polyhedral oligomeric silsesquioxane nanocomposites containing quinolyl moiety

A series of functional polyhedral oligomeric silsesquioxane (POSS)/polyimide (PI) nanocomposites were prepared using a two‐step approach. First, octa(aminophenyl)silsesquioxane (OAPS) was mixed with poly(amic acid) (PAA) prepared by reacting bis(4‐amino‐3,5‐dimethylphenyl)‐3‐quinolylmethane and 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride. Second, the resulting solution was subjected to thermal imidization. The well‐defined ‘hard particles’ (POSS) and the strong covalent bonds in the amide linkage between the carbon atom of the carboxyl side group in PAA and the nitrogen atom of the amino group in POSS lead to a significant improvement in the thermal and mechanical properties. Homogeneous dispersion of POSS cages in the PI is evident from scanning electron microscopy, which further confirms that the POSS molecule becomes an integral part of the organic‐inorganic inter‐crosslinked network system. Differential scanning calorimetry and dynamic mechanical analysis show that the glass transition temperatures of the POSS‐containing nanocomposites are higher than that of the corresponding neat PI system, owing to the significant increase of the crosslinking density in the PI/POSS nanocomposites. Increasing the concentration of OAPS in the PI networks decreases the dielectric constant. Pure PI and PI/POSS systems have good antimicrobial activity. Copyright © 2011 Society of Chemical Industry     

Surfactant‐assisted processing of polyimide/multiwall carbon nanotube nanocomposites for microelectronics applications

The dispersion and stability of carbon nanotubes (CNTs) inside a polymer matrix, especially with a high CNT content, are still big challenges. Moreover, the interaction between CNTs and the polymer matrix should be strong enough to improve the mechanical properties. The efficient dispersion of CNTs is essential for the formation of a uniform distribution of a CNT network in a polymer composite. Polyimide/multiwall CNT nanocomposites were synthesized by in situ polymerization with the aid of a surfactant. A Fourier transform infrared spectroscopy study proved that the surfactant did not hamper the polymerization of the polyimide. The microstructure, storage modulus and electrical conductivity of the nanocomposites were improved using a particular amount of the surfactant. Environmental stability test results showed that the polyimide with 1 wt% of CNTs produced with the aid of the surfactant possessed excellent reliability in high‐temperature and high‐humidity environments. Surfactants were successfully used to obtain fine‐structure polyimide/CNT nanocomposites by in situ polymerization. The enhancement of the mechanical properties was attributed to the incorporation of the surfactant. A percolation of electrical conductivity could be achieved with 1 wt% of CNTs. Copyright © 2010 Society of Chemical Industry     

Preparation and characterization of polyimide/modified layered double hydroxide nanocomposites

Polyimide (PI)/modified layered double hydroxide (m‐LDH) nanocomposites were prepared in this study. For this work, m‐LDHs were prepared from layered double hydroxides (LDHs) through an anionic exchange reaction with pyromellitic dianhydride (PMDA), succinic acid or terephthalic acid. PMDA and 4,4′‐oxydianiline were used to make the poly(amic acid) precursor for PI. X‐ray diffraction and transmission electron microscopy measurements confirmed that the PMDA‐modified LDH (PMH) and terephthalic acid‐modified LDH (TMH) were well dispersed in the PI matrix. For the succinic acid‐modified LDH, some of the LDH was intercalated with the succinic acid molecules but most maintained its original structure. Thus, the PI/PMH and PI/TMH nanocomposites exhibited improved mechanical, thermal and electrical properties compared to pure PI. The PMH has aromatic groups and is expected to have better π–π interactions with the PI chains than the other m‐LDHs. Thus, the PI/PMH nanocomposites exhibited the best properties among the nanocomposites investigated. Copyright © 2010 Society of Chemical Industry     

Thermal and dielectric properties of newly developed L-tryptophan-based optically active polyimide and its POSS nanocomposites

A new chiral diamine L-methyl-2-[(3,5-diaminobenzoyl)amino]-3-(1H-indol-3yl)propanoate was synthesized using L-tryptophan (essential amino acid) as starting material. The structure of the synthesized diamine was supported by Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance spectroscopy (¹H and ¹³C-NMR) and mass spectral techniques. The diamine was polymerized with 3,3’,4,4’-benzophenone tetracarboxylic dianhydride via thermal imidization method to produce thermally stable chiral polyimide (PI) with low dielectric constant. Additionally, polyimide nanocomposites were also prepared by incorporating amino functionalized polyhedral oligomeric silsesquioxane (POSS) into the PI matrix. The polyimide and PI/POSS nanocomposites were characterized by FT-IR spectroscopy. The PI was found to have specific optical rotation of –41.4°. The inherent viscosity was found to be 0.77 dLg^?1 indicating that a high molecular weight PI was formed. Surface morphology of the neat PI and nanocomposites was studied by scanning electron microscopy, transmission electron microscopy and atomic force microscopy (AFM) that reveal uniform distribution of the nanoparticles in the PI matrix. DSC analysis indicates that the T_g of the PI and its nanocomposites are in the range of 222–250 °C. The T_10% was found to be in the range of 402.4–470.5 °C for the PI and its nanocomposites. The dielectric constant values are in the range of 3.5–2.1.     

Highly stable polyimide composite films based on 1,2,4-triazole ring reinforced with multi-walled carbon nanotubes: Study on thermal,mechanical, and morphological properties

A novel diamine bearing aromatic pendant triazole ring, namely, 3,5-diamino-N-(1H-[1,2,4]triazol-3-yl)-benzamide, was successfully synthesized. The prepared diamine and a commercial dianhydride were reacted in situ in the presence of carboxylated multi-walled carbon nanotubes (MWCNTs) with stirring to give a homogeneous MWCNT/poly(amic acid) mixture which was then heated under a heating program to give a series of MWCNT/polyimide (PI) composites with different proportions of MWCNT (5, 10, and 15 wt%). The composite films were tested for different properties including spectral, morphological, thermal, and mechanical properties. Scanning and transmission electron microscopy revealed the modified MWCNTs were well dispersed in the PI matrix while the structure of the polymer and the MWCNTs structure were stable in the preparation process. The thermal stability of the films containing MWCNTs was improved as the MWCNT content increased from 5 to 15 wt% due to the improved interfacial interaction between the PI matrix and surface-modified MWCNTs. Tensile tests on the composites showed an increase in the elastic modulus and the yield strength, and decrease in the failure strain.     

Wear properties of 3‐aminopropyltriethoxysilane‐functionalized carbon nanotubes reinforced ultra high molecular weight polyethylene nanocomposites

Ultra high molecular weight polyethylene (UHMWPE) is extensively used as a material in various high‐end applications with superior mechanical properties. Carbon nanotubes (CNTs) reinforced UHMWPE (CNT/UHMWPE) nanocomposite is a promising material that can compensate for the weak durability of UHMWPE. In this study, multiwalled carbon nanotubes were oxidized and silanized using acid mixture and 3‐aminopropyltriethoxysilane, respectively, to improve the interfacial strength between CNTs and UHMWPE. The CNT/UHMWPE nanocomposite was fabricated using these oxidized and silanized CNTs. The treatment effect of CNTs on the wear behavior of the CNT/UHMWPE nanocomposites was investigated through wear tests. The oxidization and silanization of CNTs were confirmed by infrared spectroscopy. Scanning electron microscope analysis showed that the silane‐treated CNT/UHMWPE nanocomposites showed better dispersion and interfacial adhesion between UHMWPE and CNTs becaue of the newly formed functional groups on the CNTs. The friction coefficient and wear rate of silanized CNT/UHMWPE nanocomposite were also found to be lower than those of raw UHMWPE and oxidized CNT/UHMWPE nanocomposite. CNTs were functionalized using oxidation and silanization methods to improve the interfacial adhesion between CNTs and UHMWPE. POLYM. ENG. SCI., 2010. © 2010 Society of Plastics Engineers     

A comparative study on the electrical and mechanical behaviour of multi‐walled carbon nanotube composites prepared by diluting a masterbatch with various types of polypropylenes

Polypropylene (PP) nanocomposites with multi‐walled carbon nanotubes (CNT) were produced by a small‐scale masterbatch melt dilution technique using five PP differing in melt flow index (MFI) and degree of maleination. PP used in a masterbatch has MFI = 12 (PP₁₂), the others used PP which have MFI = 2 or MFI = 8. The state of CNT dispersion as assessed by melt rheological and morphological investigations indicated a better dispersion when using unmodified PP with MFI = 8 (PP₈) and the masterbatch's PP₁₂. Electrical conductivity results showed nanotube percolation at contents between 1.1 and 2.0 vol %, whereas lower values were obtained for the matrices with the best dispersion, i.e., PP₈ and PP₁₂. The dependencies of the relative Young's modulus on the CNT content showed that the maleinization improved the interfacial interactions between the components, especially in the case of maleated PP with MFI = 8 (PP‐MA₈), but the better dispersion was prevented by the incompatibility between polar groups of PP‐MA and the nonpolar origin masterbatch PP₁₂. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and properties of novel polyimide optical materials with different haloid pendant

To investigate the difference of trifluoromethyl group and chlorine group affecting the optical properties of polyimides (PIs), two diamine monomers with different haloid pendants were designed and synthesized including (1,4‐(4‐amino‐2‐trifluoromethylphenoxy)‐2‐(3′5′‐ditrifluoromethylphenyl)benzene and (1,4‐(4‐amino‐2‐trifluoromethylphenoxy)‐2‐(3′‐trifluoromethyl‐4′‐chlorophenyl) benzene). From both diamines, two series of PIs with different haloid pendants were prepared via two‐step chemical imidization methods with various dianhydride compounds. All the PIs have the high T_g, excellent thermal stability and good solubility, and can be formed the transparent, strong, and flexible films. All the PIs also are good transparent in UV‐evisible absorption spectra, and have the low birefringences (0.0128–0.0157 at 650 nm) and low optical loss at communication windows. Two series of PIs exhibit the similar optical properties, except for refractive index. Based on the fantastic characterization, a series of optical materials with the tunable refractive indices were obtained by copolymerization. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Novel positive‐type photosensitive polyimide with low dielectric constant

A novel positive‐type photosensitive polyimide (PSPI) with a low dielectric constant was developed. The PSPI system was composed of soluble block PI (Bco‐PI) with a hydroxy group and diazonaphthoquinone as a photoreactive compound. The base Bco‐PI was prepared by a direct one‐pot polycondensation of 2,2‐bis(3‐amino‐4‐hydroxy‐phenylhexafluoropropane), 2,2‐bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane, and cyclohexanetetracarboxylic dianhydride in the presence of a γ‐valerolactone and pyridine catalyst system using N‐methyl‐2‐pyrrolidone as the solvent. The film of Bco‐PI was colorless and transparent, both important factors for a PSPI. Photosensitive soluble block PI (Bco‐PI), containing 20 wt % ester of 2,3,4‐trihydroxybenzophenone with 1,2‐naphthoquinone‐(2)‐diazide‐5‐sulfonic acid (NT200), showed a sensitivity of 350 mJ/cm² and a contrast of 1.20 when it was exposed to UV light, followed by development with 5% tetramethylammonium hydroxide aqueous solution at room temperature. The estimated optical dielectric constants of the PIs with and without NT200 were 2.68 and 2.75, respectively. These values were significantly lower than those of conventional aromatic PIs, such as Kapton film (50EN). © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 15–21, 2005     

Synthesis and characterization of polyimide/multi‐walled carbon nanotube nanocomposites

Polyimide/multi‐walled carbon nanotube (PI‐MWNT) nanocomposites were fabricated by an in situ polymerization process. Chemical compatibility between the PI matrix and MWNTs is achieved by pretreatment of the carbon nanotubes in a mixture of sulfuric acid and nitric acid. The dispersion of MWNTs in the PI matrix was found to be enhanced significantly after acid modification. The glass transition (T_g) and decomposition (T_d) temperature of PI‐MWNT nanocomposites were improved as the MWNT content increased from 0.5 to 15 wt%. The storage modulus of the PI/MWNT nanocomposites is nine times higher than that of pristine PI at room temperature. The tensile strength of PI doubles when 7 wt% MWNTs is added. The dielectric constant of the PI‐MWNT nanocomposites increased from 3.5 to 80 (1 kHz) as the MWNT content increased to 15 wt%. The present study demonstrates that enhanced mechanical properties can be obtained through a simple in‐situ polymerization process. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers