Synthesis and liquid oxygen compatibility of a phosphorous‐containing epoxy resin

A phosphorus‐containing epoxy resin was synthesized successfully by 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide (DOPO) and bisphenol F epoxy resin (DGEBF) and its molecular structure was confirmed by FTIR spectra. The results of the liquid oxygen mechanical impact test indicated that the cured phosphorus‐containing epoxy resin did not show any reactions during the 20 times of mechanical impact, which revealed that it was compatible with liquid oxygen. Thermal properties of the cured epoxy resins were evaluated by differential scanning calorimetry and thermal gravimetric analysis. It was found that the cured phosphorus‐containing epoxy resin had a better thermal stability than DGEBF. The enhancement of thermal stability for the epoxy resin was favorable to improve liquid oxygen compatibility. The X‐ray photoelectron spectroscopy analysis confirmed that the mechanical impact resulted in phosphorus‐containing groups on the surface of the cured phosphorus‐containing epoxy resin thermally decomposed to form phosphoric oxyacid which was in accordance with the mechanism that organo‐phosphorus compounds could work in the condensed phase to inhibit the combustion. These results suggest that the phosphorus‐containing epoxy resin has the potential as the matrix of the liquid oxygen composite tank. POLYM. ENG. SCI., 55:651–656, 2015. © 2014 Society of Plastics Engineers     

Synthesis,thermal and mechanical behavior of a silicon/phosphorus containing epoxy resin

A liquid silicon/phosphorus containing flame retardant (DOPO–TVS) was synthesized with 9,10‐dihydro‐9‐oxa‐10‐phosphapheanthrene‐10‐oxid (DOPO) and triethoxyvinylsilane (TVS). Meanwhile, a modified epoxy resin (IPTS–EP) was prepared by grafting isocyanate propyl triethoxysilane (IPTS) to the side chain of bisphenol A epoxy resin (EP) through radical polymerization. Finally, the flame retardant (DOPO–TVS) was incorporated into the modified epoxy resin (IPTS–EP) through sol–gel reaction between the ethyoxyl of the two intermediates to obtain the silicon/phosphorus containing epoxy resin. The molecular structures of DOPO–TVS, IPTS–EP and the final modified epoxy resin were confirmed by FTIR spectra and ¹H‐NMR, ³¹P‐NMR. Thermogravimetric analysis (TGA), differential scanning calorimetry, and limiting oxygen index were conducted to explore the thermal properties and flame retardancy of the synthesized epoxy resin. The thermal behavior and flame retardancy were improved. After heating to 600°C in a tube furnace, the char residue of the modified resin containing 10 wt % DOPO–TVS displayed more stable feature compared to that of pure EP, which was observed both by visual inspection and scanning electron microscope (SEM). Moreover, the mechanical performance testing results exhibited the modified epoxy resins possessed elevated tensile properties and fracture toughness which is supported by SEM observation of the tensile fracture section. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42788.     

Phosphorus‐containing epoxy resin for an electronic application

A phosphorus‐containing epoxy resin, 6‐H‐dibenz[c,e][1,2] oxaphosphorin‐6‐[2,5‐bis(oxiranylmethoxy)phenyl]‐6‐oxide (DOPO epoxy resin), was synthesized and cured with phenolic novolac (Ph Nov), 4,4′‐diaminodiphenylsulfone (DDS), or dicyandiamide (DICY). The reactivity of these three curing agents toward DOPO epoxy resin was found in the order of DICY > DDS > Ph Nov. Thermal stability and the weight loss behavior of the cured polymers were studied by TGA. The phosphorus‐containing epoxy resin showed lower weight loss temperature and higher char yield than that of bisphenol‐A based epoxy resin. The high char yields and limiting oxygen index (LOI) values as well as excellent UL‐94 vertical burn test results of DOPO epoxy resin indicated the flame‐retardant effectiveness of phosphorus‐containing epoxy resins. The DOPO epoxy resin was investigated as a reactive flame‐retardant additive in an electronic encapsulation application. Owing to the rigid structure of DOPO and the pendant P group, the resulting phosphorus‐containing encapsulant exhibited better flame retardancy, higher glass transition temperature, and thermal stability than the regular encapsulant containing a brominated epoxy resin. High LOI value and UL‐94 V‐0 rating could be achieved with a phosphorus content of as low as 1.03% (comparable to bromine content of 7.24%) in the cured epoxy, and no fume and toxic gas emission were observed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 353–361, 1999     

Synthesis and performance of a novel nitrogen‐containing cyclic phosphate for intumescent flame retardant and its application in epoxy resin

A novel nitrogen‐containing cyclic phosphate (NDP) was synthesized and well characterized by ¹H, ¹³C, ³¹P NMR, mass spectra and elemental analysis. NDP was used as an additive intumescent flame retardant (AIFR) to impart flame retardancy and dripping resistance for diglycidyl ether of bisphenol‐A epoxy resin (DGEBA) curied by 4,4′‐diaminodiphenylsulfone (DDS) with different phosphorus content. The flammability, thermal stability, and mechanical properties of NDP modified DGEBA/DDS thermosets were investigated by UL‐94 vertical burning test, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and Izod impact strength and flexural property tests. The results showed that NDP modified DGEBA/DDS thermosets exhibited excellent flame retardancy, moderate changes in glass transition temperature and thermal stability. When the phosphorus content reached only 1.5 wt %, the NDP modified DGEBA/DDS thermoset could result in satisfied flame retardancy (UL‐94, V‐0). The TGA curves under nitrogen and air atmosphere suggested that NDP had good ability of char formation, and there existed a distinct synergistic effect between phosphorus and nitrogen. The flame retardant mechanism was further realized by studying the structure and morphology of char residues using FT‐IR and scanning electron microscopy (SEM). It indicated that NDP as phosphorus‐nitrogen containing flame retardant worked by both of the condensed phase action and the vapor phase action. Additionally, the addition of NDP decreased slightly the flexural strength of the flame retarded DGEBA epoxy resins, and increased the Izod impact strength of these thermosets. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41859.     

Performance comparison of epoxy resins modified with diphenylphosphine oxide and DOPO

By curing the reaction mixture of diphenylphosphine oxide (DPO) and diglycidyl ether of bisphenol A with 4,4′‐diaminodiphenylsulfone, flame‐retardant epoxy resins (EP/DPO) were prepared. Flame‐retardant epoxy resins modified with 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) were similarly prepared (denoted as EP/DOPO). The limiting oxygen index value of pure epoxy resin, EP/DPO–P‐0.9 (with a phosphorus content of 0.9 wt%), and EP/DOPO–P‐0.9 are 23.0, 30.5, and 29.4%, respectively. EP/DPO–P‐0.9 reached a UL‐94 vertical burning test V‐0 rating, while EP/DOPO–P‐0.9 failed. The results of the cone calorimetry test, thermo‐oxidative degradation behavior study, and pyrolysis‐gas chromatography/mass spectrometry analysis indicated that both flame retardants mainly act through the gas‐phase activity mechanism. Together, the results of this study suggest that EP/DPO are high performance resins with good thermal stability, high glass transition temperature, and low water absorptivity for practical applications.     

Joint flame‐retardant effect of triazine‐rich and triazine/phosphaphenanthrene compounds on epoxy resin thermoset

To obtain a more efficient flame‐retardant system, the extra‐triazine‐rich compound melamine cyanurate (MCA) was coworked with tri(3‐9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide‐2‐hydroxypropan‐1‐yl)?1,3,5‐triazine‐2,4,6‐trione (TGIC–DOPO) in epoxy thermosets; these were composed of diglycidyl ether of bisphenol A (DGEBA) epoxy resin and 4,4′‐diaminodiphenyl methane (DDM). The flame‐retardant properties were investigated by limited oxygen index measurement, vertical burning testing, and cone calorimeter testing. In contrast to the DGEBA/DDM (EP for short) thermoset with a single TGIC–DOPO, a better flame retardancy was obtained with TGIC–DOPO/MCA/EP. The 3% TGIC–DOPO/2% MCA/EP thermoset showed a lower peak heat‐release rate value, a lower effective heat of combustion value, fewer total smoke products, and lower total yields of carbon monoxide and carbon dioxide in comparison with 3% TGIC–DOPO/EP. The results reveal that MCA and TGIC–DOPO worked jointly in flame‐retardant thermosets. The dilution effect of MCA, the quenching effect of TGIC–DOPO, and their joint action inhibited the combustion intensity and imposed a better flame‐retardant effect in the gas phase. The 3% TGIC–DOPO/2% MCA/EP thermoset also exhibited an increased residue yield, and more compositions with triazine rings were locked in the residues; this implied that MCA/TGIC–DOPO worked jointly in the condensed phase and promoted thermoset charring. The results reveal the better flame‐retardant effect of the MCA/TGIC–DOPO system in the condensed phase. Therefore, the joint incorporation of MCA and TGIC–DOPO into the EP thermosets increased the flame‐retardant effects in both the condensed and gas phases during combustion. This implied that the adjustment to the group ratio in the flame‐retardant group system endowed the EP thermoset with better flame retardancy. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43241.     

The synthesis and characterization of a novel phosphorus–nitrogen containing flame retardant and its application in epoxy resins

A novel, halogen‐free, phosphorus–nitrogen containing flame retardant 2[4‐(2,4,6‐Tris{4‐[(5,5‐dimethyl‐2‐oxo‐2λ⁵‐[1,3,2]dioxaphosphinan‐2‐yl)hydroxymethyl]phenoxy}‐(1,3,5)‐triazine (TNTP) was successfully synthesized in a three‐step process, and characterized by FTIR, NMR spectroscopy, mass spectra, and elemental analysis. A series of modified DGEBA epoxy resin with different loadings of TNTP were prepared and cured by 4,4‐diaminodiphenylsulfone (DDS). Thermal gravimetric analysis and vertical burning test (UL‐94) were used to evaluate the flame retardancy of TNTP on DGEBA epoxy resin. The results showed that TNTP had a great impact on flame retardancy. All modified thermosets by using TNTP exhibited higher T_g than pure DGEBA/DDS. The loading of TNTP at only 5.0 wt % could result in satisfied flame retardancy (UL‐94, V‐0) together with high char residue (27.3%) at 700°C. The addition of TNTP could dramatically enhance the flame retardancy of DGEBA epoxy resins, which was further confirmed by the analysis of the char residues by scanning electron microscopy and FTIR. Furthermore, no obviously negative effect was found on the Izod impact strength and flexural property of DGEBA epoxy resins when TNTP loading limited in 5.0 wt %. DGEBA/DDS containing 2.5 wt % TNTP could enhance Izod impact strength from 10.47 to 10.94 kJ m^?2, and showed no appreciable effect on the flexural property (85.20 MPa) comparing with pure DGEBA/DDS (87.03 MPa). Results indicated that TNTP as a phosphorus–nitrogen synergistic intumescent flame retardant could be used for DGEBA epoxy resin. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41079.     

The flame retardant group‐synergistic‐effect of a phosphaphenanthrene and triazine double‐group compound in epoxy resin

A flame retardant tri‐(phosphaphenanthrene‐(hydroxyl‐methylene)‐phenoxyl)‐1, 3, 5‐triazine (Trif‐DOPO) and its control samples are incorporated into diglycidyl ether of bisphenol‐A (DGEBA) and 4, 4′‐diamino‐diphenyl sulfone (DDS) to prepare flame retardant thermosets, respectively. According to the results of limited oxygen index (LOI), UL94 vertical burning test and cone calorimeter test, the Trif‐DOPO/DGEBA/DDS thermoset with 1.2 wt % phosphorus possesses the LOI value of 36% and UL94 V‐0 flammability rating, and Trif‐DOPO can decrease the peak of heat release rate (pk‐HRR) and reduce the total heat release (THR) of thermosets. All these prove better flame retardant performance of Trif‐DOPO than that of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide(DOPO). The residue photos of thermosets after cone calorimetry test disclose that Trif‐DOPO can promote the formation of thick and tough melting char layer for combined action of the flame retardant groups of Trif‐DOPO. The results from thermo gravimetric analysis (TGA) and pyrolysis‐gas chromatography‐mass spectrometry(Py‐GC/MS) show that the groups in Trif‐DOPO can be decomposed and produce PO₂ fragments, phosphaphenanthrene and phenoxy fragments, which can jointly quench the free radical chain reaction during combustion. Therefore, the excellent flame retardancy of Trif‐DOPO is attributed to its flame retardant group‐synergic‐effect. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39709.     

Synthesis of a novel DOPO‐based polyphosphoramide with high char yield and its application in flame‐retardant epoxy resins

A novel and highly effective flame retardant (FR), DOPO‐TPMP oligomer, was synthesized by a simple condensation of 4‐(hydroxymethyl)‐2,6,7‐trioxa‐1‐phosphabicyclo[2.2.2]octane‐1‐oxide and phosphorus oxychloride followed by a polycondensation reaction with 6‐(2,5‐dihydroxyphenyl)‐6H‐dibenzo[c,e][1,2]oxaphosphinine‐6‐oxide. The chemical structure of DOPO‐TPMP was well characterized using Fourier transform infrared and NMR spectra. DOPO‐TPMP was used as an additive‐type FR for epoxy resin (EP). The FR properties of the resultant EP composites were investigated by limiting oxygen index (LOI) test, UL‐94 vertical burning test and cone calorimeter measurements. Specifically, the EP composite containing 10.0% DOPO‐TPMP achieved a LOI value of 36.1%, V‐0 rating in the UL‐94 test and a 58% reduction in peak heat release rate. Further mechanism analysis attributed the enhanced flame retardancy to the increased char yield on the addition of DOPO‐TPMP. © 2019 Society of Chemical Industry     

Synthesis of a novel phosphorus‐containing dicyclopentadiene novolac hardener and its cured epoxy resin with improved thermal stability and flame retardancy

A novel phosphorus‐containing dicyclopentadiene novolac (DCPD‐DOPO) curing agent for epoxy resins, was prepared from 9,10‐dihydro‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) and n‐butylated dicyclopentadiene phenolic resin (DCPD‐E). The chemical structure of the obtained DCPD‐DOPO was characterized with FTIR, ¹H NMR and ³¹P NMR, and its molecular weight was determined by gel permeation chromatography. The flame retardancy and thermal properties of diglycidyl ether bisphenol A (DGEBA) epoxy resin cured with DCPD‐DOPO or the mixture of DCPD‐DOPO and bisphenol A‐formaldehyde Novolac resin 720 (NPEH720) were studied by limiting oxygen index (LOI), UL 94 vertical test and cone calorimeter (CCT), and differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. It is found that the DCPD‐DOPO cured epoxy resin possess a LOI value of 31.6% and achieves the UL 94 V‐0 rating, while its glass transition temperature (T_g) is a bit lower (133 °C). The T_g of epoxy resin cured by the mixture of DCPD‐DOPO and NPEH720 increases to 137 °C or above, and the UL 94 V‐0 rating can still be maintained although the LOI decreases slightly. The CCT test results demonstrated that the peak heat release rate and total heat release of the epoxy resin cured by the mixture of DCPD‐DOPO and NPEH720 decrease significantly compared with the values of the epoxy resin cured by NPEH720. Moreover, the curing reaction kinetics of the epoxy resin cured by DCPD‐DOPO, NPEH720 or their mixture was studied by DSC. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44599.     

Improving thermal and flame‐retardant properties of epoxy resins by a novel reactive phosphorous‐containing curing agent

In an attempt to improve thermal and flame‐retardant properties of epoxy resins efficiently, a new reactive phosphorus‐containing curing agent called 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐yl‐(phenylimino)‐(4‐hydroxyphenyl)me‐thane (DOPO‐PHM) was synthesized and was combined with 4,4′‐diaminodiphenyl methane (DDM) to co‐cure epoxy resins (E51), which covalently incorporated halogen‐free DOPO organ groups into the epoxy networks. The chemical structure of this curing agent was confirmed by FTIR, 1D, and 2D NMR spectra. A reaction mechanism during the preparation was proposed, and the electron effect on the stabilization of the carbocation was discussed. Various DDM/DOPO‐PHM molar ratios were used to get the materials with different phosphorus contents. Their dynamic mechanical, thermal, and flame‐retardant properties were evaluated by dynamic mechanical thermal analysis, thermogravimetric analysis, and limiting oxygen index (LOI) respectively. All samples had a single T_g, showing that these epoxy resins were homogeneous phase for long‐term use in spite of adding DOPO‐PHM. Both char yields (under nitrogen and air atmospheres) increased with the increasing of phosphorus content and the LOI values increased from 24.5 for standard resin to 33.5 for phosphorus‐containing resins, indicating the significant enhancement of thermal stability and flame retardancy. POLYM. ENG. SCI., 54:1192–1200, 2014. © 2013 Society of Plastics Engineers     

Novel adamantane‐containing epoxy resin

A novel adamantane‐containing epoxy resin diglycidyl ether of bisphenol‐adamantane (DGEBAda) was successfully synthesized from 1,3‐bis(4‐hydroxyphenyl)adamantane by a one‐step method. The proposed structure of the epoxy resin was confirmed with Fourier transform infrared, ¹H‐NMR, gel permeation chromatography, and epoxy equivalent weight titration. The synthesized adamantane‐containing epoxy resin was cured with 4,4′‐diaminodiphenyl sulfone (DDS) and dicyandiamide (DICY). The thermal properties of the DDS‐cured epoxy were investigated with differential scanning calorimetry and thermogravimetric analysis (TGA). The dielectric properties of the DICY‐cured epoxy were determined from its dielectric spectrum. The obtained results were compared with those of commercially available diglycidyl ether of bisphenol A (DGEBA), a tetramethyl biphenol (TMBP)/epoxy system, and some other associated epoxy resins. According to the measured values, the glass‐transition temperature of the DGEBAda/DDS system (223°C) was higher than that of the DGEBA/DDS system and close to that of the TMBP/DDS system. TGA results showed that the DGEBAda/DDS system had a higher char yield (25.02%) and integral procedure decomposition temperature (850.7°C); however, the 5 wt % degradation temperature was lower than that of DDS‐cured DGEBA and TMBP. Moreover, DGEBAda/DDS had reduced moisture absorption and lower dielectric properties. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

High performance modification of hyperbranched polyborate on diglycidyl ether of bisphenol‐a resin

High performance epoxy resin was obtained by introducing hyperbranched polyborate (HBPB) into diglycidyl ether of bisphenol A (DGEBA) resin to overcome the defects such as low char yield and poor toughness of DGEBA resin. By virtue of the massive functional end groups, hyperbranched and rigid boron‐containing structures of HBPB, the thermal resistance of DGEBA resin cured with diamino diphenyl sulfone (DDS) can be greatly improved. Moreover, with the toughening effect of hyperbranched structures of HBPB, the mechanical properties such as flexural strength and interlaminar shear strength of the carbon fiber reinforced DGEBA‐DDS composite could be greatly increased by HBPB without a decrease on modulus and glass transition temperature of DGEBA‐DDS resin. POLYM. COMPOS. 36:424–432, 2015. © 2014 Society of Plastics Engineers     

N-phosphorylated Iminophosphoranes based on 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide and their flame-retardant behavior in epoxy resins

Two novel N-phosphorylated iminophosphoranes based on 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) were evaluated as flame retardant (FR) additives. They were incorporated in two different epoxy resin systems (EP) based on diglycidyl ether of bisphenol A (DGEBA) and a novolac glycidyl ether (DEN438) both cured with dicyandiamide/fenuron (D/F). Decomposition temperatures and char yields of the cured EP were evaluated and compared to the corresponding neat EP as well as to structurally related compounds. The flame-retardant properties were investigated using the UL-94 V test and further verified with cone calorimetry. The N-phosphorylated iminophosphoranes with DOPO moieties exhibit distinctive flame-retardant effects in DGEBA/D/F and DEN438/D/F, depending on the chemical environment around the second phosphorus atom, even with low FR content. If the iminophosphorane is triphenyl phosphite based the mode of action is assigned to act mainly in the condensed phase hence being advantageous in DGEBA/D/F compared to the triphenylphosphine-based iminophosphorane, which in turn is more active in the gas phase resulting in superiority in DEN438/D/F.     

Synthesis,thermal properties,and flame retardance of phosphorus‐containing epoxy‐silica hybrid resins

A novel epoxy resin modifier, phosphorus‐containing epoxide siloxane (DPS) with cyclic phosphorus groups in the Si O network, was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) with polyhedral‐oligomeric siloxanes, which was synthesized by the sol–gel reaction of 3‐glycidoxypropyltrimethoxysilane. DPS was confirmed by Fourier transform infrared and ²⁹Si NMR measurement, and then was employed to modify epoxy resin at various ratios, with 4,4‐diaminodiphenyl‐methane as a curing agent. In order to make a comparison, DOPO‐containing epoxy resins were also cured under the same conditions. The resulting organic–inorganic hybrid epoxy resins modified with DPS exhibited a high glass transition temperature (T_g), a good thermal stability, and a high limited oxygen index. In addition, the tensile strength of cured products was also rather desirable. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Synthesis and properties of phosphorus‐containing advanced epoxy resins. II

Two phosphorus‐containing diacids were synthesized from 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide (DOPO) and either maleic acid or itaconic acid and then reacted with diglycidyl ether of bisphenol A (DGEBA) to form two series of advanced epoxy resins. Reaction conditions, such as reaction time, temperature and catalyst, are discussed in this article. After curing with 4,4'‐diaminodiphenyl sulfone (DDS), thermal properties of cured epoxy resins were studied using dynamic mechanical analysis (DMA) and thermal gravimetric analysis (TGA). The flame retardancy of cured epoxy resins was evaluated using a UL‐94 measurement. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 228–235, 2000     

Curing kinetics and reaction‐induced homogeneity in networks of poly(4‐vinyl phenol) and diglycidylether epoxide cured with amine

Mixtures of diglycidyl ether of bisphenol‐A (DGEBA) epoxy resin with poly(4‐vinyl phenol) (PVPh) of various compositions were examined with a differential scanning calorimeter (DSC), using the curing agent 4,4′‐diaminodiphenylsulfone (DDS). The phase morphology of the cured epoxy blends and their curing mechanisms depended on the reactive additive, PVPh. Cured epoxy/PVPh blends exhibited network homogeneity based on a single glass transition temperature (T_g) over the whole composition range. Additionally, the morphology of these cured PVPh/epoxy blends exhibited a homogeneous network when observed by optical microscopy. Furthermore, the DDS‐cure of the epoxy blends with PVPh exhibited an autocatalytic mechanism. This was similar to the neat epoxy system, but the reaction rate of the epoxy/polymer blends exceeded that of neat epoxy. These results are mainly attributable to the chemical reactions between the epoxy and PVPh, and the regular reactions between DDS and epoxy. Polym. Eng. Sci. 45:1–10, 2005. © 2004 Society of Plastics Engineers.     

新型磷硅改性环氧树脂阻燃性能研究

采用聚苯基硅氧烷(PPMS)、9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物(DOPO)与双酚A型环氧树脂合成了新型的含磷硅环氧树脂(Si-P-EP),通过红外谱确认了其结构。将Si-P-EP与纯环氧树脂复配制备得到复合物Si-P-EP/EP,对其进行了氧指数和水平燃烧测试并通过红外光谱对燃烧后的残炭结构进行了分析。结果表明,Si-P-EP/EP的氧指数有所提高,水平火蔓延速率由27.27 mm/min降低到20.13 mm/min,Si-P-EP/EP燃烧后生成了含磷硅的炭层,从而提高了环氧树脂的阻燃性能。     

Flame‐Retarded Epoxy Resins with a Curing Agent of DOPO‐Triazine Based Anhydride

A 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO)‐triazine based anhydride (2,4,6‐tris‐(DOPO‐methylformatephthalic anhydride‐phenoxy)‐1,3,5‐triazine (TDA)) is synthesized and used as a halogen‐free flame retardant co‐curing agent for diglycidyl ether of bisphenol A/methylhexahydrophthalic anhydride (DGEBA/MHHPA) system. The conjugation of anhydride group is increased by the utilization of TDA, leading to the reduction in the curing activation energy. The cured epoxy resin passes V‐0 rating of UL 94 test with the limiting oxygen index of 32.7 vol% when the phosphorus content is only 1.5 wt%. The flame‐retarding action of triazine ring and DOPO moiety is investigated by the residue analysis and the characterization of pyrolysis gas. Due to the presence of bulky aromatic subunits in the molecular structure of TDA, the flame‐retarded epoxy resins maintain the high glass transition temperature of DGEBA/MHHPA. Besides, the moisture absorption is diminished following the usage of TDA.

     

Flame retardancy and thermal properties of organoclay and phosphorous compound synergistically modified epoxy resin

Phosphorous flame retardants (PFRs) are common halogen‐free flame retardants. However, the flame retardancy of PFRs has not been fully exploited. Herein, the synergistic flame retardant effect of a typical phosphorous compound, 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO), and organoclay on epoxy is studied. Results show that the peak of heat release rate (pHRR) and smoke production rate of modified epoxy resin (EP) with both 2.0 wt % phosphorus and 4.0 wt % organoclay are only 40% and 46% of that of neat EP resin, respectively, while the sole use of 2.0 wt % phosphorus only decrease the pHRR to 59% of that of neat EP resin. The structure and thermal decomposition behavior of as‐prepared nanocomposites are analyzed, and a synergistic flame retardant mechanism is proposed. This investigation opens a new approach to obtain halogen‐free EPs with higher flame retardancy and better overall properties than the EPs loaded with DOPO only. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43367.