Zwitterionic‐polymer‐functionalized poly(vinyl alcohol‐co‐ethylene) nanofiber membrane for resistance to the adsorption of bacteria and protein

A zwitterionic poly(vinyl alcohol‐co‐ethylene) (PVA‐co‐PE) nanofiber membrane for resistance to bacteria and protein adsorption was fabricated by the atom transfer radical polymerization of sulfobetaine methacrylate (SBMA). The PVA‐co‐PE nanofiber membrane was first surface‐activated by α‐bromoisobutyryl bromide, and then, zwitterionic SBMA was initiated to polymerize onto the surface of nanofiber membrane. The chemical structures of the functionalized PVA‐co‐PE nanofiber membranes were confirmed by attenuated total reflectance–Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy. The morphologies of the PVA‐co‐PE nanofiber membranes were characterized by scanning electron microscopy. The results show that the poly(sulfobetaine methacrylate) (PSBMA) was successfully grafted onto the PVA‐co‐PE nanofiber membrane, and the surface of the nanofiber membrane was more hydrophilic than that of the pristine membrane. Furthermore, the antibacterial adsorption properties and resistance to protein adsorption of the surface were investigated. This indicated that the PSBMA‐functionalized surface possessed good antibacterial adsorption activity and resistance to nonspecific protein adsorption. Therefore, this study afforded a convenient and promising method for preparing a new kind of soft and nonwoven dressing material with antibacterial adsorption and antifouling properties that has potential use in the medical field. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44169.     

Ferroelectric nanodot formation from spin‐coated poly(vinylidene fluoride‐co‐trifluoroethylene) films and their application to organic solar cells

We demonstrated a facile route to the preparation of self‐assembled poly(vinylidene fluoride‐co‐trifluoroethylene) [P(VDF‐TrFE)] nanodots from spin‐coated thin films. We found that the initial film thickness would play an important role in the formation of such P(VDF‐TrFE) nanodots. Interestingly, the electric dipoles of such nanodots were self‐aligned toward the bottom electrode and their ferroelectric properties were determined by using piezoresponse force microscopy. In addition, the self‐polarized ferroelectric nanostructures were introduced to small molecular organic photovoltaic devices and allowed for enhancing the short circuit current density (J_sc) from 9.4 mA/cm² to 10.2 mA/cm² and the power conversion efficiency from 2.37% to 2.65%. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41230.     

Tailoring adhesive forces between poly(dimethylsiloxane) and glass substrates using poly(vinyl alcohol) primers

A thin poly(vinyl alcohol) (PVA) layer has been found to control adhesive forces between poly(dimethylsiloxane) (PDMS) and a glass substrate. Various PVAs were coated on glass substrates on top of which PDMS pre‐polymer was cast. After thermal curing, the peel strength was tested. It was found that the fundamental adhesive forces are attributed to the degree of hydrolysis (or saponification value) of the PVAs. For a PVA modified with a silanol group, strong adhesive force resulted. The range of tailoring the force with the PVAs was 16 kgf/m. The production of thin interlaminated PVA layers as primers was demonstrated. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39927.     

Effects of different porous fillers on interfacial properties of poly (vinyl alcohol) hybrid films

Poly(vinyl alcohol) (PVA)-based hybrids have demonstrated broad liquid separation applications but separation performances are constrained by the compatibility between fillers and polymer, and thus it is essential to study the interfacial properties of these hybrids. In this work, PVA hybrids with four different porous fillers have been fabricated and characterized with Fourier transform infrared, X-ray diffraction, Scanning electron microscope, swelling and contact angle tests. Swelling results show that PVA has a degree of swelling (DS) of 79% in water but the swelling is compressed after adding fillers and the DS for PVA hybrids has decreased by 19%, 17%, 15%, and 9% for 30 wt% loading of ZIF-8, UiO-66, Hβ and ZSM-5, respectively. For methanol and its 10 wt% aqueous solution, similar swelling results are obtained due to mutual interactions among the filler, polymer and test liquids. Based on water and glycerol contact angle results, the surface energy of PVA is estimated to be 40.56 Nm⁻¹ and it drops to 27.39 Nm⁻¹ after adding less hydrophilic ZIF-8 or rise to 48.56 Nm⁻¹ after introducing more hydrophilic ZSM-5. The high-film hydrophilicity and then large surface energy have rendered methanol/water sorption selectivity of PVA hybrids decrease to some extent or vice versa.     

Development of antifouling poly(vinyl chloride) blend membranes by atom transfer radical polymerization

In this study, antifouling poly(vinyl chloride) (PVC) blend membranes were prepared by blending the PVC based amphiphilic copolymer PVC‐g‐poly(hydroxyethyl methacrylate) (PVC‐g‐PHEMA), synthesized by atom transfer radical polymerization (ATRP), into the hydrophobic PVC matrix via the nonsolvent‐induced phase separation method. The in situ ATRP reaction solutions were also used as the blend additives to improve membrane performance. Attenuated total reflectance–Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy indicated that the blend membranes based on the two blend routes exhibited similar surface chemical compositions. The membrane morphology and surface wettability were determined by scanning electronic microscopy and water contact angle measurement, respectively. The blend membranes showed improved water permeability, comparable rejections and enhanced antifouling properties compared with the pure PVC membrane. The PVC blend membranes also had excellent long‐term stability in terms of chemical compositions and fouling resistance. The results demonstrated that ATRP was a promising technique to synthesize amphiphilic copolymer and prepare stable blend antifouling membranes. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45832.     

Influence of hyaluronic acid on the formation of isolated poly(vinyl acetate) films for oral solid coatings

This article presents a preformulation study of isolated poly(vinyl acetate) films with the addition of hyaluronic acid (HA). The films were prepared with the solvent evaporation method and evaluated according to macroscopic, morphologic, structural, water vapor transmission (WVT), swelling index (Si%), and thickness measurements and thermal analyses. The addition of HA resulted proportional reductions in the thickness, transparency, and flexibility and increased WVT rates and Si%. Fourier transform infrared spectra demonstrated that only physical mixing occurred, whereas the thermogravimetric analysis and differential scanning calorimetry curves indicated that the films were thermally stable because the initial decomposition temperature was above 200 °C. The electron micrographs showed modifications in the structure of the polymeric mesh after imersion of films in simulated gastric or intestinal fluids. The prepared films have potential for application in pharmaceutical modification of drug release. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44815.     

Hydrogen-bonding assembly of heteropolyacid and poly(vinyl alcohol) for strong,flexible, and transparent UV-protective films

Although many preparation approaches have been developed, it remains a huge challenge to achieve ultraviolet (UV)-protection films that combine high transparency, excellent UV-shielding, and mechanical properties. Herein, we demonstrate a facile and eco-friendly process for fabricating strong, flexible, and transparent UV-protective poly(vinyl alcohol) (PVA) films by exploiting silicomolybdic acid (SiMoA) as UV absorber and reinforcing phase. Fourier-transform infrared analysis confirms the formation of strong hydrogen-bonding interactions between PVA and SiMoA. The glass-transition temperature, mechanical properties, and UV-shielding stability of the UV-protective PVA composite films obviously increase with increasing the content of SiMoA. By incorporation of only 2 wt % SiMoA, the UV-protective PVA composite film can block more than 90% of UV light in the entire UV regions and retain high visible light transparency (up to 95%). Simultaneously, the UV-protective PVA composite film presents excellent mechanical properties with a tensile strength of 65.2 MPa and an elongation at break of 172.6%, which are 72.0 and 69.5% higher than that of pristine PVA films. This work provides a simple but effective approach for creating strong, flexible, and transparent UV-blocking polymeric materials via hydrogen-bonding assembly, which are expected to have wide application prospects in UV-protection field. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48813.     

Photo‐induced grafting of poly(ethylene glycol) onto polyamide thin film composite membranes

In this study, the surface grafting of poly(ethylene glycol) (PEG) onto commercial polyamide thin film composite (TFC‐PA) membranes was carried out, using ultraviolet photo‐induced graft polymerization method. The attenuated total reflection Fourier transform infrared spectra verify a successful grafting of PEG onto the TFC‐PA membrane surface. The scanning electron microscope and atomic force microscope analyses demonstrate the changes of the membrane surface morphology due to the formation of the PEG‐grafted layer on the top. The contact angle measurements illustrate the increased hydrophilicity of the TFC‐PA‐g‐PEG membrane surfaces, with a significantly reduced water contact angles compared to the unmodified one. Consequently, the separation performance of the PEG‐grafted membranes is highly improved, with a significant enhancement of flux at a great retention for removal of the different objects in aqueous feed solutions. In addition, the antifouling property of the modified membranes is also clearly improved, with the higher maintained flux ratios and the lower irreversible fouling factors compared to the unmodified membrane. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45454.     

Preparation of UV reactive montmorillonite and characterization of its nanocomposites with poly(vinyl alcohol)

A cation‐exchanged montmorillonite clay is prepared as filler material with high dispersibility, that should act as Fe³⁺‐donor for photochemical crosslinking of PVA/Fe³⁺‐MMT materials with filler contents of up to 50 wt % with regard to the polymer matrix. Hence, no organic photoinitiators and hazardous compounds are utilized. This material may be considered environmentally benign and could be applied in the field of food packaging or for biomedical applications. Upon UV exposure of liquid PVA/Fe³⁺‐MMT dispersion samples, a significant change of the refractive index is determined and the absorption at 360 nm decreased. This indicates the transition of Fe³⁺ to Fe²⁺, which initiates a radical crosslinking mechanism. A homogenous distribution and parallel orientation of the modified clay particles is revealed by SEM measurements. The solubility behavior of the PVA/Fe³⁺‐MMT composite materials in deionized water, changes considerably due to the high filler content and UV‐induced crosslinking, resulting in gel contents exceeding 90 wt %. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

One simple and stable coating of mixed‐charge copolymers on poly(vinyl chloride) films to improve antifouling efficiency

An antifouling surface is highly desirable for many biomedical applications. In this study, poly(vinyl chloride) (PVC) films were endowed with the improved properties of resisting nonspecific protein adsorption and platelet adhesion simply through being coated with a kind of mixed‐charge zwitterionic polymer, poly(3‐sulfopropyl methacrylate–methacrylatoethyl trimethyl ammonium chloride–glycidyl methacrylate) (PSTG), with random moieties of negatively charged 3‐sulfopropyl methacrylate potassium, positively charged [2‐(methacryloyloxy)‐ethyl] trimethylammonium chloride, and glycidyl methacrylate. The PSTG‐grafted PVC films were formed by the simple immersion of an amino‐functionalized PVC film into a PSTG solution. A grafting density of 220.84 µg/cm² of PSTG4‐grafted PVC film was successfully obtained. The PSTG4‐grafted PVC film showed a lower contact angle (37.5 °) than the ungrafted PVC film (98.3 °). The in vitro protein adsorption results show that the bovine serum albumin adsorption amount decreased 6.72 µg/cm² in the case of the PSTG4‐grafted PVC film, whereas that on the ungrafted PVC film was 28.54 µg/cm². So, PSTG‐grafted PVC films could be promising materials for medical devices. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44632.     

Fabrication of a poly(N‐vinyl‐2‐pyrrolidone) modified macroporous polypropylene membrane via one‐pot reversible‐addition fragmentation chain‐transfer polymerization and click chemistry

In this study, a macroporous polypropylene membrane (MPPM) was grafted with hydrophilic poly(N‐vinyl‐2‐pyrrolidone) (PNVP) based on a one‐pot reversible‐addition fragmentation chain transfer (RAFT) polymerization and click chemistry. First, we prepared the clickable membrane by bromination and following S_N2 nucleophilic substitution reaction; then, click chemistry and RAFT polymerization were performed in one‐pot to graft PNVP to the MPPM surface. The surface characterizations, including attenuated total reflectance/Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and field‐emission scanning electron microscopy, illustrated that PNVP was really grafted onto the MPPM surface. The permeation and antifouling characteristics of the MPPMs were measured by the filtration of a bovine serum albumin dispersion; this showed that in contrast to the nascent membrane, the grafted membrane efficiently obstructed protein molecules because of the compactly grafted polymer chains. The hydrophilicity and antifouling properties of MPPM were greatly ameliorated after modification. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42649.     

Properties of chitosan/poly(vinyl alcohol) films for drug‐controlled release

With bovine serum albumin (BSA) as a model drug, drug‐loaded films of chitosan (CS) and poly(vinyl alcohol) (PVA) were obtained by a casting/solvent evaporation method and crosslinked by tripolyphosphate (TPP). The films were characterized by FTIR, XRD, and SEM. The influential factors of drug‐loaded films on drug‐controlled release were studied. These factors included, primarily, the component ratio of CS and PVA, the loaded amount of BSA, the pH and ionic strength of the release solution, and the crosslinking time with TPP. The results showed that within 25 h, when the weight ratios of CS to PVA in the drug‐loaded films were 90 : 10, 70 : 30, 50 : 50, and 30 : 50, the cumulative release rates of BSA were 63.3, 72.9, 81.8, and 91.8%, respectively; when the amounts of model drug were 0.1, 0.2, and 0.3 g, the release rates were 100, 81.8, and 59.6%, respectively; when the pH values of the drug release medium were 1.0, 3.8, 5.4, and 7.4, the release rates reached 100, 100, 37.9, and 7.8%, respectively; the cumulative release rates of BSA were 78.4, 82.3, 84.3, and 91.7% when the ionic strengths of the release solution were, respectively, 0.1, 0.2, 0.3, and 0.4M; when the crosslinking times of these drug films in the TPP solution were 0, 5, 15, 30, and 60 min, the release rates attained 100, 100, 81.8, 65, and 43.3%, respectively. All the results indicated that the CS/PVA film was useful in drug delivery systems. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 808–813, 2005     

Phase structure in the blend of atactic poly(vinyl alcohol) with atactic poly(vinyl alcohol‐block‐vinyl acetate)

An almost fully saponified atactic poly(vinyl alcohol) and an atactic poly(vinyl alcohol‐block‐vinyl acetate) of which degree of saponification is 89 mol % were blended by a solution casting method. The phase structure of the blend film was analyzed by optical microscopy, ¹³C‐NMR, and differential scanning calorimetry. The most remarkable structure of the blend was composed of cylindrical domains penetrating the film. The swelling behavior of the blend films was also investigated in the dimethylsulfoxide and water mixed solvents to find differences in solubility and diffusion behavior between the matrix and the domain. The cylindrical domains could be selectively dissolved away in water and the film became porous. We tried to change the size of the cylindrical domain with various film preparation conditions. This aimed to turn the film into the useful filter membrane. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1807–1815, 2002     

Oleophilic modification of poly(vinyl alcohol) films by functionalized soybean oil triglycerides

In this study, maleinized (SOMAP) and isocyanated soybean oil (SONCO) triglycerides have been successfully grafted onto one surface of poly(vinyl alcohol)(PVA) films to give films that are hydrophilic on one side and hydrophobic on the other. The surface grafting was accomplished by the reaction of succinic anhydride or isocyanate functionalities of soybean oil derivatives and the hydroxyl groups of PVA films. The reaction was run in toluene, using PVA films on glass slides so that only one side of the film was accessible. After grafting, the films were rinsed with hot toluene to remove ungrafted triglycerides from the surface. The reaction on the surface was confirmed by ATR‐FTIR and ¹H‐NMR spectroscopic techniques. A series of films were prepared at different concentrations of SOMAP or SONCO in toluene. The increase in hydrophobicity with an increase in SOMAP or SONCO concentrations was observed by water contact angle measurements. The contact angles on the grafted side of the film reach their maximum value of 88° and 94° for 26 and 2.5% SOMAP and SONCO concentrations in toluene, respectively, while the ungrafted side gives contact angle of 48°. Surface morphologies of PVA‐g‐SOMAP and PVA‐g‐SONCO films were investigated by atomic force microscopy, whereas optical microscopy and staining was used to determine the homogeneity of the films. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of clay type on dispersion and barrier properties of hydrophobically modified poly(vinyl alcohol)–bentonite nanocomposites

The oxygen and water vapor permeability at high relative humidity was studied for composite films formed by incorporation of three different bentonites (MMT) into an ethylene‐modified, water‐soluble poly(vinyl alcohol), EPVOH. The oxygen permeability decreased linearly with an increased addition of hydrophilic MMTs. X‐ray diffraction and Fourier transform infrared spectroscopy suggested a homogeneous distribution in the thickness direction with disordered and probably exfoliated structures for hydrophilic MMTs. In contrast, organophilic modified clay showed an intercalated structure with the clay preferentially located at the lower film surface, a combination which was however efficient in reducing the water vapor‐ and oxygen permeabilities at low addition levels. Composite films of EPVOH and Na⁺‐exchanged MMT resulted in high resistance to dissolution in water, which was ascribed to strong interactions between the components resulting from matching polarities. Annealing the films at 120°C resulted in enhanced resistance to water dissolution and a further reduction in oxygen permeability. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42229.     

Multilayer composite surfaces prepared by an electrostatic self‐assembly technique with quaternary ammonium salt and poly(acrylic acid) on poly(acrylonitrile‐co‐acrylic acid) membranes

An electrostatic self‐assembly technique was applied to prepare ion complex polymer layers on polyacrylonitrile with acrylic acid segments {poly(acrylonitrile‐co‐acrylic acid) [P(AN‐co‐AA)]}. For the ionic complex layers, quaternary ammonium salts, such as cetyl trimethyl ammonium chloride (CTAC) and tetramethyl ammonium chloride (TMAC), were used as cationic species, and also, poly(acrylic acid) (PAA) was used as an anionic species. These cationic and anionic species were self‐assembled alternately on the surface of the P(AN‐co‐AA) membrane. Fourier transform infrared spectroscopy, AFM, and water contact angle measurements of the membrane surface were used to confirm the formation of the multilayer composites on the P(AN‐co‐AA). The permeabilities of water and macromolecules of different molecular weights were evaluated by a membrane filtration technique. The values of permeability strongly depended on the formation layer by layer of these ion composites on the base P(AN‐co‐AA). Through the measurement of the values of the contact angle of water, it was clear that surface nature of the base membrane treated by CTAC or TMAC and PAA dramatically changed. We concluded that such an electrostatic self‐assembly technique is useful for the preparation of multicomposite layers to modify the surface of base P(AN‐co‐AA) membranes. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Production of polymeric membranes made of polypropylene,poly(ethylene‐co‐vinyl acetate), and poly(vinyl alcohol)

In this study, we prepared and characterized membranes containing polypropylene, poly(ethylene‐co‐vinyl acetate) (EVA), and poly(vinyl alcohol) (PVA). The production process involved blend extrusion and calendering followed by solvent extraction by toluene and water of the EVA and PVA phases. Morphology studies involving scanning electron microscopy determined the pore size distribution at the surface and in the internal regions of the membrane. The resulting membrane properties were related to the processing variables (extension rate, process temperature, and solvent extraction methods) and blend composition. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3275–3286, 2004     

High‐strength biodegradable poly(vinyl alcohol)/fly ash composite films

We prepared biodegradable composite films of poly(vinyl alcohol) (PVA) and fly ash (FA) spanning 5, 10, 15, 20, and 25 wt % concentrations by casting aqueous solutions. The tensile strengths of the composite films were increased proportionally via the addition of FA. The strength of the film was enhanced by 193% with 20% FA compared to the neat PVA control. Further addition of FA deviated from the linear trend. The moduli of the composites also increased proportionally with FA addition to 212% at 20 wt % FA addition compared to the control. The percentage strain at break exponentially decreased with the addition of FA. In the dynamic mechanical behavior, the storage and loss moduli both increased with FA content. The tan δ peaks corresponding to the glass‐transition temperature shifted 5–10°C higher above the control sample (73°C). This shift was attributed to a reduction in the mobility of PVA segments because they were anchored by the FA surface. The reductions in mobility manifested in strong interfacial interactions were indicative of hydrogen bonding. Broadening and reduction in the intensities of the stretching and bending peaks of ? OH, ? CH and ? C?O of PVA in the Fourier transform infrared spectra were observed. This suggested that hydrogen bonding was active between the functional groups in the FA and PVA chains. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and properties of UV‐curable fluorinated polyurethane acrylates containing crosslinkable vinyl methacrylate for antifouling coatings

To obtain highly effective antifouling coatings, a series of UV‐curable polyurethane acrylates containing diluents [heptadecafluorodecyl methacrylate (PFA, 6 wt %)/isobornyl acrylate (IBOA, 34 wt %)/methyl methacrylate (MMA, 20‐5 wt %)/vinyl methacrylate (VMA, 0–15 wt %)] were prepared. This study examined the effect of bulky MMA (20‐5 wt %)/crosslinkable VMA (0–15 wt %) weight ratio on the properties of the UV‐curable polyurethane acrylates. The fluorine concentration in UV‐cured film surface increased with increasing VMA content up to 9 wt % and then decreased. The T_gα, transparency, elasticity, and mechanical properties of the UV‐cured film samples increased with increasing VMA content. The water/methylene iodide contact angles and surface tension of samples increased from 107/79 to 121/91° and decreased from 17.8 to 12.7 mN/m with increasing VMA content up to 9 wt % and then decreased/increased, respectively. From these results, it was found that the optimum VMA content was 9 wt % to obtain a high‐performance antifouling coating. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42168.     

Structure and properties of flame‐sprayed poly(ethylene‐co‐vinyl alcohol) copolymer coatings

Powder coatings formed by flame spraying are being used in industrial applications. The resistance of plastics and their composite materials to chemicals, solvents, and atmospheric conditions and their high impact strength even at low service temperatures increase the importance of plastic and plastic‐based coatings. In this study, an ethylene vinyl alcohol copolymer powder was coated via flame spraying with gases of oxygen and acetylene. The bond strengths and microstructures of the coatings were determined with tensile testing, scanning electron microscopy, and Fourier transform infrared. The bond strengths of the coatings were determined according to ASTM C 633. Oxidizing, carburizing, and neutral flames were used. The bond strengths were lower for the oxidizing and carburizing coatings than for the neutral flame coatings. The results indicated that during the flame‐spraying process, the composition, gas, spraying distance, and coating thickness were important factors in the coating bond strength. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1357–1364, 2004