Miscibility of natural polyhydroxyalkanoate blend with controllable material properties

Polyhydroxyalkanoate (PHA) copolyesters were synthesized by Cupriavidus necator cells in continuous feeding of cosubstrates. During the PHA accumulation phase, the composition of 3‐hydroxybutyrate (3HB), 3‐hydroxyvalerate (3HV), and 4‐hydroxyvalerate (4HV) of the copolyesters changed with time, resulting in a change in their miscibility. The as‐produced PHA finally became a miscible blend of copolymers with a broad chemical composition distribution. The good miscibility and low crystallinity of the natural P(3HB‐co‐3HV‐co‐4HV) blend lead to a remarkable increase in ductility and elongation at break. It indicates that the material properties of copolyesters can be tailored via feeding control of cosubstrates. It was also found that the fractions of natural PHA blend exhibited distinctive thermal behavior and the overall behavior of the as‐produced PHA blend was primarily dependent on a fraction of high 3HB content. The material properties of a PHA blend are therefore not determined by its overall chemical composition but more likely by the combined effect of individual copolyesters or fractions. Moreover, the degree of X‐ray crystallinity of random P(3HB‐co‐3HV‐co‐4HV) blend declined significantly with the increase of 3HV and 4HV content, in contrast to the high crystallinity of well‐known P(3HB‐co‐3HV) copolyesters. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Improvement of the production of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate‐co‐4‐hydroxybutyrate) terpolyester by manipulating the culture condition

BACKGROUND: The aim of this work is to enhance the production of terpolyester poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate‐co‐4‐hydroxybutyrate) (P(3HB‐co‐3HV‐co‐4HB)) produced by a locally isolated bacterium, Cupriavidus sp. USMAA2‐4. The monomer composition was varied by supplementing different carbon precursors and by manipulating the culture condition through one‐stage cultivation. The effect of C/N ratio and different concentrations of carbon source and precursors were investigated in order to produce higher content of this terpolyester. Although research on this biodegradable polyester is abundant, studies on terpolyester P(3HB‐co‐3HV‐co‐4HB) are still limited. RESULTS: Supplementation of oleic acid in accumulation medium increased the bacterial growth and polyhydroxyalkanoate (PHA) accumulation. It was also shown that medium consisting of assorted carbon precursors at C/N 20 gave relatively high dry cell weight and P(3HB‐co‐3HV‐co‐4HB) content. Various compositions of terpolyester were obtained when the concentration of oleic acid and 4HB precursors were manipulated. The combination of oleic acid with γ‐butyrolactone and 1‐pentanol was found to be the best combination to produce high PHA content (81 wt%). The composition of monomer in P(3HB‐co‐3HV‐co‐4HB) was produced in the range 8–13 mol% for 3HV and 9–24 mol% for 4HB, respectively. CONCLUSIONS: The production of P(3HB‐co‐3HV‐co‐4HB) in shake‐flasks successfully produced 81 wt% of PHA content. This manipulated culture condition can be used at larger scale to provide modeling for the production of terpolyester in a bioreactor. Copyright © 2012 Society of Chemical Industry     

Thermal stability and degradation of biological terpolyesters over a broad temperature range

Because of high susceptibility to thermal degradation during conventional melt processing of poly(3‐hydroxybutyrate) (P3HB) homopolymer, incorporation of a second or third monomer unit in the polyester backbones is expected to reduce the melting temperature and crystallinity, resulting in a controlled thermal degradation with improved stability. In this work, random poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate‐co‐4‐hydroxyvalerate) (P3HB3HV4HV) terpolyesters biologically synthesized by Cupriavidus necator were investigated for the thermal stability and degradation over a broad temperature range (100–300°C) in comparison with P3HB homopolyester. The work revealed that below the complete melting point (around 150°C), the terpolyester exhibited a high thermal stability and became an amorphous semisolid suitable for conventional thermal processing. Size exclusion chromatography plus nuclear magnetic resonance analysis was used to examine the thermal degradation products and the vulnerability of different monomer units at high temperatures (240–290°C). We found that 3HV unit in P3HB3HV4HV copolymers was more vulnerable to thermal degradation than 3HB unit under air. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41715.     

Miscibility and crystallization kinetics of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/ poly(methyl methacrylate) blends

The miscibility and crystallization kinetics of the blends of random poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [P(HB‐co‐HV)] copolymer and poly(methyl methacrylate) (PMMA) were investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). It was found that P(HB‐co‐HV)/PMMA blends were miscible in the melt. Thus the single glass‐transition temperature (T_g) of the blends within the whole composition range suggests that P(HB‐co‐HV) and PMMA were totally miscible for the miscible blends. The equilibrium melting point (T°_m) of P(HB‐co‐HV) in the P(HB‐co‐HV)/PMMA blends decreased with increasing PMMA. The T°_m depression supports the miscibility of the blends. With respect to the results of crystallization kinetics, it was found that both the spherulitic growth rate and the overall crystallization rate decreased with the addition of PMMA. The kinetics retardation was attributed to the decrease in P(HB‐co‐HV) molecular mobility and dilution of P(HB‐co‐HV) concentration resulting from the addition of PMMA, which has a higher T_g. According to secondary nucleation theory, the kinetics of spherulitic crystallization of P(HB‐co‐HV) in the blends was analyzed in the studied temperature range. The crystallizations of P(HB‐co‐HV) in P(HB‐co‐HV)/PMMA blends were assigned to n = 4, regime III growth process. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3595–3603, 2004     

Environmental degradation and biofouling of ‘green’ plastics including short and medium chain length polyhydroxyalkanoates

Biopolymers derived from natural resources are potential alternatives to recalcitrant synthetic plastics; however, studies investigating the degradability of these biopolymers in natural environments are relatively few. This study compares the environmental degradation of polymers described as ‘green plastics’ in garden soil in terms of weight loss, topographical changes and biofilm attachment. Poly(3‐hydroxybutyrate) (PHB) and poly[(3‐hydroxybutyrate)‐co‐(3‐hydroxyvalerate)] (P(HB‐co‐8HV)), (copolymer containing 8 mol% HV) films degraded rapidly, losing 50% of their initial weight in 50 days. In contrast, after burial for 380 days, the medium chain length polyhydroxyoctanoate (PHO) lost 60% of its weight, poly(D ,L ‐lactide) (PDLL) 18% and poly[(D ,L ‐lactide)‐co‐glycolide] (PDLLG) 35%. Polystyrene (PS) and ethyl cellulose (EC) showed no significant degradation. Both weight loss and biofouling occurred in the following sequence: P(HB‐co‐8HV) = PHB > PHO > PDLLG > PDLL > PS = EC. The surface rugosity and surface areas of PHB and P(HB‐co‐8HV) increased three‐ and twofold, respectively, during degradation, indicating surface erosion. The surface rugosity of PHO increased twofold and the surface area increased by 25%. This in situ study demonstrates a quantifiable relationship between biofilm attachment, surface rugosity and polymer degradation. PHB and P(HB‐co‐8HV) showed greater biofouling and increased surface rugosity, and degraded significantly faster than the other polymers studied. Copyright © 2009 Society of Chemical Industry     

Biodegradation of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) by a novel P3/4HB depolymerase purified from Agrobacterium sp. DSGZ

A poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P3/4HB)‐degrading strain, Agrobacterium sp. DSGZ, was isolated from sewage by poly(3‐hydroxybutyrate) (PHB) mineral agar plates. A novel P3/4HB depolymerase with a molecular weight of 34 kDa was purified through a novel single‐step affinity chromatography method from the culture supernatant of the strain by using P3/4HB powder as a substrate. The purified depolymerase showed optimum activity at pH 7.0 and 50°C, and was stable at the pH range of 6.0 to 9.0 and temperature below 50°C. Enzyme activity was strongly inhibited by phenylmethylsulfonyl fluoride (PMSF), ethylenediaminetetraacetic acid (EDTA), hydrophobic reagents, and some metal ions. The depolymerase degraded poly(3‐hydroxybutyrate) (PHB), poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHBV), P3/4HB, and polycaprolactone (PCL), instead of polylactic acid (PLA) or poly(butylene succinate) (PBS). Meanwhile, the depolymerase showed high hydrolytic activity against short‐chain length esters, such as butyrate acid ester and caprylic acid ester. The main degradation products of the depolymerase were identified as hydroxybutyrate monomers and dimers, and the monomers were identified as 3‐hydroxybutyrate (3HB) monomers and 4‐hydroxybutyrate (4HB) monomers. The preparation procedure, crystallinity, and 4HB composition of the P3/4HB copolymer showed evident effect on degradation behavior, and change in crystallinity was the main factor affecting degradation. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42805.     

Production and characterization of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) co‐polymer by a N2‐fixing cyanobacterium,Nostoc muscorum Agardh

BACKGROUND: Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [P(3HB‐co‐3HV)] co‐polymer has immense potential in the field of environmental and biomedical sciences as biodegradable and biocompatible material. The present study examines a filamentous N₂‐fixing cyanobacterium, Nostoc muscorum Agardh as a potent feedstock for P(3HB‐co‐3HV) co‐polymer production and characterization of co‐polymer film for commercial applications. RESULTS: Under photoautotrophic growth conditions, N. muscorum Agardh accumulated the homopolymer of poly‐β‐hydroxybutyrate (PHB), whereas synthesis of P(3HB‐co‐3HV) co‐polymer was detected under propionate‐ and valerate‐supplemented conditions. Exogenous carbons such as acetate, fructose and glucose supplementation with propionate/valerate was found highly stimulatory for the co‐polymer accumulation; the content reached 58–60% of dry cell weight (dcw) under P‐/N‐deficiencies with 0.4% acetate + 0.4% valerate supplementation, the highest value reported so far for P(3HB‐co‐3HV) co‐polymer‐producing cyanobacterial species. The material properties of the films were studied by mechanical tests, surface analysis and differential scanning calorimetry (DSC). CONCLUSION: N. muscorum Agardh, a photoautotrophic N₂‐fixing cyanobacterium, emerged as a potent host for production of P(3HB‐co‐3HV) co‐polymer with polymer content 60% of dry cell weight. The material properties of the films were found to be comparable with that of the commercial polymer, thus advocating its potential applications in various fields. Copyright © 2012 Society of Chemical Industry     

Miscibility and crystallization behavior of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/poly(vinyl acetate) blends

The miscibility and crystallization behavior of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (P(HB‐co‐HV))/poly(vinyl acetate) (PVAc) blends have been investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). It was found that P(HB‐co‐HV)/PVAc blends were miscible in the melt over the whole compositions. Thus the blend exhibited a single glass transition temperature (T_g), which increased with increasing PVAc composition. The spherulitic morphologies of P(HB‐co‐HV)/PVAc blends indicated that the PVAc was predominantly segregated into P(HB‐co‐HV) interlamellar or interfibrillar regions during P(HB‐co‐HV) crystallization because of the volume‐filled spherulites. As to the crystallization kinetics study, it was found that the overall crystallization and crystal growth rates decreased with the addition of PVAc. The kinetics retardation was primarily attributed to the reduction of chain mobility and dilution of P(HB‐co‐HV) upon mixing with higher T_g PVAc. The overall crystallization rate was predominantly governed by the spherulitic growth rate and promoted by the samples treated with the quenched state because of the higher nucleation density. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 980–988, 2006     

Miscibility and morphology of chiral semicrystalline poly‐(R)‐(3‐hydroxybutyrate)/chitosan and poly‐(R)‐(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/chitosan blends studied with DSC, 1H T1 and T1ρ CRAMPS

The phase structure of poly‐(R)‐(3‐hydroxybutyrate) (PHB)/chitosan and poly‐(R)‐(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (P(HB‐co‐HV))/chitosan blends were studied with ¹H CRAMPS (combined rotation and multiple pulse spectroscopy). ¹H T₁ was measured with a modified BR24 sequence that yielded an intensity decay to zero mode rather than the traditional inversion‐recovery mode. ¹H T_1ρ was measured with a 40‐kHz spin‐lock pulse inserted between the initial 90° pulse and the BR24 pulse train. The chemical shift scale is referenced to the methyl group of PHB as 1.27 ppm relative to tetramethylsilane (TMS) based on ¹H liquid NMR of PHB. Single exponential T₁ decay is observed for the β‐hydrogen of PHB or P(HB‐co‐HV) at 5.4 ppm and for the chitosan at 3.7 ppm. T₁ values of the blends are either faster than or intermediate to those of the plain polymers. The T_1ρ decay of β‐hydrogen is bi‐exponential. The slow T_1ρ decay component is interpreted as the crystalline phase of PHB or P(HB‐co‐HV). The degree of crystallinity decreases with increasing wt % of chitosan in the blend. The fast T_1ρ of β‐hydrogen and the T_1ρ of chitosan in the blends either follow the same trend as or faster than the weight‐averaged values based on the T_1ρ of the plain polymers. Together with the observation by differential scanning calorimeter (DSC) of a melting point depression and one effective glass transition temperature in the blends, the experimental evidence strongly suggests that chitosan is miscible with either PHB or P(HB‐co‐HV) at all compositions. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1253–1258, 2002     

The synthesis of PHA‐g‐(PTHF‐b‐PMMA) multiblock/graft copolymers by combination of cationic and radical polymerization

A new and promising method for the diversification of microbial polyesters based on chemical modifications is introduced. Poly(3‐hydroxy alkanoate)‐g‐(poly(tetrahydrofuran)‐b‐poly(methyl methacrylate)) (PHA‐g‐(PTHF‐b‐PMMA)) multigraft copolymers were synthesized by the combination of cationic and free radical polymerization. PHA‐g‐PTHF graft copolymer was obtained by the cationic polymerization of THF initiated by the carbonium cations generated from the chlorinated PHAs, poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), and poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) (PHBHx) in the presence of AgSbF₆. Therefore, PHA‐g‐PTHF graft copolymers with hydroxyl ends were produced. In the presence of Ce⁺⁴ salt, these hydroxyl ends of the graft copolymer can initiate the redox polymerization of MMA to obtain PHA‐g‐(PTHF‐b‐PMMA) multigraft copolymer. Polymers obtained were purified by fractional precipitation. In this manner, their γ‐values (volume ratio of nonsolvent to the solvent) were also determined. Their molecular weights were determined by GPC technique. The structures were elucidated using ¹H‐NMR and FTIR spectroscopy. Thermal analyses of the products were carried out using differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Tailoring the surface architecture of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) scaffolds

This study was designed to determine whether the surface modifications of the various poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐co‐4HB)] copolymer scaffolds fabricated would enhance mouse fibroblast cells (L929) attachment and proliferation. The P(3HB‐co‐4HB) copolymer with a wide range of 4HB monomer composition (16–91 mol %) was synthesized by a local isolate Cupriavidus sp. USMAA1020 by employing the modified two‐stage cultivation and by varying the concentrations of 4HB precursors, namely γ‐butyrolactone and 1,4‐butanediol. Five different processing techniques were used in fabricating the P(3HB‐co‐4HB) copolymer scaffolds such as solvent casting, salt‐leaching, enzyme degradation, combining salt‐leaching with enzyme degradation, and electrospinning. The increase in 4HB composition lowered melting temperatures (T_m) but increased elongation to break. P(3HB‐co‐91 mol % 4HB) exhibited a melting point of 46°C and elongation to break of 380%. The atomic force analysis showed an increase in the average surface roughness as the 4HB monomer composition increased. The mouse fibroblasts (L929) cell attachment was found to increase with high 4HB monomer composition in copolymer scaffolds. These results illustrate the importance of a detailed characterization of surface architecture of scaffolds to provoke specific cellular responses. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Thermal stability of P(HB‐co‐HV) and its blends with polyalcohols

The thermal stability of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [P(HB‐co‐HV)] and its blends with poly(propylene glycol)s (PPGs) and castor oil (CO) is reported. The study includes the determination of the degradation kinetics of these materials and the analysis of the effects of the degradation on the mechanical properties and crystallization behavior. Spectroscopy (¹H‐NMR, FTIR), differential scanning calorimetry (DSC), thermogravimetry, and tensile testing techniques are used for the experimental analysis. A chain‐scission degradation mechanism is confirmed by the formation of vinyl groups. Two temperature ranges are investigated. In the range closest to the melting point, 100–200°C, where the blend does not exhibit weight reduction, a fast and sensible loss of molecular weight and tensile strength was detected. The second temperature range, 200–400°C, is characterized by mass loss by pyrolysis. In this range, different kinetic models of the degradation process are proposed. Polyalcohol addition produces opposite effects, while the addition of PPG enhances the degradation of P(HB‐co‐HV). When CO is added, the thermal stability of the blend increases. Mechanical properties of the blends before and after degradation were determined. The tensile modulus increases at the first step of degradation and decreases with the degradation time. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2889–2900, 2000     

Miscibility,crystallization kinetics,and mechanical properties of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)(PHBV)/poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)(P3/4HB) blends

Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)(PHBV)/poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P3/4HB) blend films were prepared by solvent‐cast method. The nonisothermal crystallization results showed that PHBV and P3/4HB are miscible due to a single glass transition temperature (T_g), which is dependent on blend composition. The isothermal crystallization results demonstrate that the crystallization rate of PHBV becomes slower after adding amorphous P3/4HB with 19.2 mol% 4HB, which could be proved through depression of equilibrium melt point ($T_m^o$ ) from 183.7°C to 177.6°C. For pure PHBV and PHBV/P3/4HB (80/20) blend, the maximum crystallization rate appeared at 88°C and 84°C, respectively. FTIR analysis showed that PHBV/P3/4HB blend films would maintain the helical structure, similar to pure PHBV. Meanwhile, with increasing P3/4HB content, the inter‐ and intra‐interactions of PHBV and P3/4HB decrease gradually. Besides, a lower elastic modulus and a higher elongation at break were obtained, which show that the addition of P3/4HB would make the brittle PHBV to ductile materials. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Miscibility and crystallization behaviors of poly(3‐hydroxybutyrate‐co‐11%‐4‐hydroxybutyrate)/Poly(3‐hydroxybutyrate‐co‐33%‐4‐hydroxybutyrate) blends

Biopolyesters poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) with an 11 mol % 4HB content [P(3HB‐co‐11%‐4HB)] and a 33 mol % 4HB content [P(3HB‐co‐33%‐4HB)] were blended by a solvent‐casting method. The thermal properties were investigated with differential scanning calorimetry. The single glass‐transition temperature of the blends revealed that the two components were miscible when the content of P(3HB‐co‐33%‐4HB) was less than 30% or more than 70 wt %. The blends, however, were immiscible when the P(3HB‐co‐33%‐4HB) content was between 30 and 70%. The miscibility of the blends was also confirmed by scanning electron microscopy morphology observation. In the crystallite structure study, X‐ray diffraction patterns demonstrated that the crystallites of the blends were mainly from poly(3‐hydroxybutyrate) units. With the addition of P(3HB‐co‐33%‐4HB), larger crystallites with lower crystallization degrees were induced. Isothermal crystallization was used to analyze the melting crystallization kinetics. The Avrami exponent was kept around 2; this indicated that the crystallization mode was not affected by the blending. The equilibrium melting temperature decreased from 144 to 140°C for the 80/20 and 70/30 blends P(3HB‐co‐11%‐4HB)/P(3HB‐co‐33%‐4HB). This hinted that the crystallization tendency decreased with a higher P(3HB‐co‐33%‐4HB) content. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and characterization of biodegradable poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)/silica nanocomposites

Biodegradable poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐co‐4HB)]/silica nanocomposites were prepared by melt compounding. The effects of silica on the morphology, crystallization, thermal stability, mechanical properties, and biodegradability of P(3HB‐co‐4HB) were investigated. The nanoparticles showed a fine and homogeneous dispersion in the P(3HB‐co‐4HB) matrix for silica contents below 5 wt%, whereas some aggregates were detected with further increasing silica content. The addition of silica enhanced the crystallization of P(3HB‐co‐4HB) in the nanocomposites due to the heterogeneous nucleation effect of silica. However, the crystal structure of P(3HB‐co‐4HB) was not modified in the presence of silica. The thermal stability of P(3HB‐co‐4HB) was enhanced by the incorporation of silica. Silica was an effective reinforcing agent for P(3HB‐co‐4HB), and the modulus and tensile strength of the nanocomposites increased, whereas the elongation at break decreased with increasing silica loading. The exciting aspect of this work was that the rate of enzymatic degradation of P(3HB‐co‐4HB) was enhanced significantly after nanocomposites preparation. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Water transport properties in poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) biopolymers

Water sorption and diffusion have been investigated in poly(3‐hydroxybutyrate) (PHB) and three poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) copolymers [P(HB‐HV)] by means of a Cahn electromicrobalance. Permeability of these samples have been determined using a gravimetric permeation cell. Two experimental setups were used for the gravimetric sorption measurements, under dynamic and static conditions, respectively. The differences observed in the results obtained using these techniques are discussed. The sorption measurements have evidenced the tendency of water molecules to form aggregates or clusters in the polymer. In addition, the static sorption method revealed the potential of PHB and P(HB‐HV) to undergo molecular relaxations, eventually leading to a partial desorption of the previously sorbed water after an induction period. The clustering effect was adequately described by the polycondensation model. On the other hand, the interpretation of the diffusivity in terms of mobility coefficients has revealed a competition between a plasticization effect and clustering. As a whole, water transport properties in PHB and its copolymers can be considered to be very close in magnitude to those of common thermoplastics such as PVC and PET. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 455–468, 1999     

Morphology and properties of biodegradable and biosourced polylactide blends with poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)

Biodegradable polymer blends based on biosourced polymers, namely polylactide (PLA) and poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P(3HB‐co‐4HB)), were prepared by melt compounding. The effects of P(3HB‐co‐4HB) on the miscibility, phase morphology, thermal behavior, mechanical properties, and biodegradability of PLA/P(3HB‐co‐4HB) blends were investigated. The blend was an immiscible system with the P(3HB‐co‐4HB) domains evenly dispersed in the PLA matrix. However, the T_g of P(3HB‐co‐4HB) component in the blends decreased compared with neat P(3HB‐co‐4HB), which might be attributed to that the presence of the phase interface between PLA and P(3HB‐co‐4HB) resulted in enhanced chain mobility near interface. The addition of P(3HB‐co‐4HB) enhanced the cold crystallization of PLA in the blends due to the nucleation enhancement of PLA caused by the enhanced chain mobility near the phase interface between PLA and P(3HB‐co‐4HB) in the immiscible blends. With the increase in P(3HB‐co‐4HB) content, the blends showed decreased tensile strength and modulus; however, the elongation at beak was increased significantly, indicating that the inherent brittlement of PLA was improved by adding P(3HB‐co‐4HB). The interesting aspect was that the biodegradability of PLA is significantly enhanced after blends preparation. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Preparation and characterization of microbial biodegradable poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)/organoclay nanocomposites

Novel biodegradable poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐co‐4HB)]/organoclay nanocomposites were prepared via solution casting. Exfoliated nanocomposite structure was confirmed by wide‐angle X‐ray diffraction (WAXD) and transmission electron microscopy (TEM) for the nanocomposites with low organoclay loadings (≤3 wt%), whereas the mixtures of exfoliated and unexfoliated organoclays were appeared in the nanocomposite with an organoclay content of 5 wt%. The organoclay fillers accelerated significantly the cold crystallization process of P(3HB‐co‐4HB) matrix. The thermal stability of the nanocomposites was in general better than that of pristine P(3HB‐co‐4HB). Considerable increase in tensile modulus was observed for the nanocomposites, especially at an organoclay content of 3 wt%. These results demonstrated that the nanocomposites improved the material properties of P(3HB‐co‐4HB). POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Thermal stability of polyhydroxyalkanoates

In this study, we examined the thermal decomposition of polyhydroxyalkanoates (PHAs) such as the homopolymer poly(3‐hydroxybutyrate) and the copolymer poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate). They are biodegradable polymers that can replace plastics produced from nonrenewable resources, such as polypropylene. The biopolymers we analyzed were commercial PHAs [obtained by means of pure cultures, with hydroxyvalerate (HV) contents of 0 and 10.4 mol %] and biopolymers produced in our laboratories (by means of an enriched activated sludge at two different organic loads, 8.5 and 20 gCOD/L, with a HV content of 20 mol %). To process these biopolymers, it is important to know their thermal stability. For this reason, thermal degradation in air by means of dynamic thermogravimetry (TG) was carried out. The TG data were adjusted to the nth‐order general analytical equation to evaluate the best order of the reaction, the temperatures of the onset and end of thermal decomposition, and the kinetic parameters. The latter were also calculated by means of other integral and differential methods and compared to those obtained by the general analytical solution. Finally, the influence of the preparation method (pure and mixed cultures and HV content within the biopolymer) on thermal stability was analyzed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2111–2121, 2006     

Thermal degradation of poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) as studied by TG,TG–FTIR,and Py–GC/MS

The thermal degradation kinetics of poly(3‐hydroxybutyrate) (PHB) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [poly(HB–HV)] under nitrogen was studied by thermogravimetry (TG). The results show that the thermal degradation temperatures (T_o, T_p, and T_f) increased with an increasing heating rate (B). Poly(HB–HV) was thermally more stable than PHB because its thermal degradation temperatures, T_o(0), T_p(0), and T_f(0)—determined by extrapolation to B = 0°C/min—increased by 13°C–15°C over those of PHB. The thermal degradation mechanism of PHB and poly(HB–HV) under nitrogen were investigated with TG–FTIR and Py–GC/MS. The results show that the degradation products of PHB are mainly propene, 2‐butenoic acid, propenyl‐2‐butenoate and butyric‐2‐butenoate; whereas, those of poly(HB–HV) are mainly propene, 2‐butenoic acid, 2‐pentenoic acid, propenyl‐2‐butenoate, propenyl‐2‐pentenoate, butyric‐2‐butenoate, pentanoic‐2‐pentenoate, and CO₂. The degradation is probably initiated from the chain scission of the ester linkage. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1530–1536, 2003