Synthesis,characterization, and thermo mechanical properties of siloxane‐modified epoxy‐based nano composite

In this study, polymer hybrid composites were synthesized by sol‐gel process. 3‐Amino‐propyltrimethoxysilane [APTMS)/γ‐Glycidoxypropyl trimethoxy‐silane (GPTMS); (4, 4′‐Methylene‐dianiline (DDM)] and 1,4‐Bis(trimethoxysilylethyl) benzene (BTB) were added to DGEBA type epoxy resin for anticipated to exhibit excellent thermal stability. Boron trifluoride monoethylamine (BF₃MEA) was used as catalyst. The structure of nanocomposites was characterized by attenuated total reflectance (ATR) and solid‐state ²⁹Si NMR which suggest EP‐APTMS‐BTB/EP‐GPTMS‐BTB possesses T³; T¹–T⁰, and T¹ structures when the BTB content was lower than 10 wt % and higher 20 wt %, respectively. BF₃MEA was proved to be an effective catalyst for the sol‐gel reaction of APTMS, but it could not promote for GPTMS. From TEM microphotographs, EP‐APTMS‐BTB (10 wt %) possesses a dense inorganic structure (particle size around 5–15 nm) compare with the loose inorganic structure of EP‐GPTM‐/BTB (10 wt %). DSC, TGA were use to analyze the thermal properties of the nanocomposites and DMA was used to analyze the dynamic mechanical properties of hybrid composites. The T_gs of all nanocomposites decreased with the increasing BTB content. A system with BTB content lower than 10 wt % showed good dynamic mechanical property and thermal stability (Td₅ increased from 336°C to 371°C, char yield increased from 27.4 to 30.2%). The structure of inorganic network affects the Td₅ and dynamic mechanical properties of composite. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40984.     

Effect of trisilanolphenyl‐POSS on rheological,mechanical, and flame‐retardant properties of poly(ethylene terephthalate)/cyclotriphosphazene systems

Poly(ethylene terephthalate) (PET) chips were coated by trisilanolphenyl–polyhedral oligomeric silsesquioxane (T‐POSS) and hexakis (para‐allyloxyphenoxy) cyclotriphosphazene (PACP) using the predispersed solution method, and PET/PACP/T‐POSS hybrids were further prepared by the melt‐blending method. The influence of T‐POSS on the rheological, thermal, and mechanical properties and flame retardancy of PET/PACP composites were discussed. The results suggest that T‐POSS was homogeneously dispersed in the PET matrix, which reduced the negative effects on polymer rheology and mechanical properties. For the PET/4%PACP/1%T‐POSS sample, the tensile strength at break and T_g increased from 29.67 MPa and 81.7 °C (PET/5%PACP) to 34.8 MPa and 85.8 °C, respectively, but the sample also self‐extinguished within 2 s, and the heat release capacity was reduced by 27.9% in comparison with that of neat PET.© 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45912.     

Synthesis and characterization of heat‐resistant N‐phenylmaleimide–styrene–maleic anhydride copolymers and application in acrylonitrile–butadiene–styrene resin

The heat‐resistant copolymer of N‐phenylmaleimide (NPMI)–styrene (St)–maleic anhydride (MAH) was synthesized in xylene at 125°C with di‐tert‐butyl diperoxyterephthalate as an initiator. The characteristics of the copolymer were analyzed by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy (¹H‐NMR and ¹³C‐NMR), gel permeation chromatography, and elemental analysis. The ¹³C‐NMR results show that the copolymer possessed random sequence distribution; this was also supported by the differential scanning calorimetry experiment, in which a single glass‐transition temperature (T_g) of 202.3°C was observed. The thermal stability and degradation mechanism of the copolymer were investigated by thermogravimetric analysis. Using the Kissinger equation and Ozawa equation, we proved a nucleation controlling mechanism with an apparent activation energy of 144 kJ/mol. Blends of acrylonitrile–butadiene–styrene with the NPMI–St–MAH copolymer with various contents were prepared with a twin‐screw extruder processes. The mechanical and thermal properties of the materials, such as the tensile and flexural strength, T_g's, and Vicat softening temperatures, were all enhanced with the addition of the modifier, whereas the melt flow index decreased. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Novel propargylether‐terminated monomers containing pyridine and phenyl pendent group: Synthesis,cure, and properties

Two novel propargylether‐terminated resins containing pyridine and bulky phenyl pendent group were prepared from propargyl bromide and different diphenols, and highly thermal stable polymers were obtained by the thermal cure of the monomers. The chemical structures of these novel monomers were well confirmed by FTIR, ¹H‐NMR and elemental analysis. Curing and thermal behavior of the resins were investigated using differential scanning calorimetry (DSC) and dynamic thermogravimetry in argon atmosphere. DSC curves of these two monomers showed a single endothermic peak corresponding to the conformation of chromene ring and homopolymerization of the chromene ring. The temperature at 5% weight loss (T_d5) was higher than 440°C under argon and the highest glass transition temperature (T_g) reached 362°C. The rheological behavior and solubility of the monomer were also investigated. The monomers showed excellent flow‐ability, broad processing window, and great solubility. These results showed that the two resins could be ideal candidates for high‐temperature resistant resins. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40469.     

Effect of poly(etherimide) chemical structures on the properties of epoxy/poly(etherimide) blends and their carbon fiber‐reinforced composites

Poly(etherimide)s (PEIs) with different chemical structures were synthesized and characterized, which were employed to toughen epoxy resins (EP/PEI) and carbon fiber‐reinforced epoxy composites (CF/EP/PEI). Experimental results revealed that the introduction of the fluorinated groups and meta linkages could help to improve the melt processability of EP/PEI resins. The EP/PEI resins showed obviously improved mechanical properties including tensile strength of 89.2 MPa, elongation at break of 4.7% and flexural strength of 144.2 MPa, and good thermal properties including glass transition temperature (T_g) of 211°C and initial decomposition temperature (T_d) of 366°C. Moreover, CF/EP/PEI‐1 and CF/EP/PEI‐4 composites showed significantly improved toughness with impact toughness of 13.8 and 15.5 J/cm², respectively. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Mechanical and thermal properties of biphenyldiol formaldehyde resin/gallic acid epoxy composites enhanced by graphene oxide

In this study, the gallic acid‐based epoxy resin (GA‐ER) and alkali‐catalysed biphenyl‐4,4′‐diol formaldehyde resin (BPFR) are synthesized. Glass fibre‐reinforced GA‐ER/BPFR composites are prepared. Graphene oxide (GO) is used to improve the mechanical and thermal properties of GA‐ER/BPFR composites. Dynamic mechanical properties and thermal, mechanical, and electrical properties of the composites with different GO content are characterized. The results demonstrate that GO can enhance the mechanical and thermal properties of the composites. The glass transition temperature, T_g, of the BPFR/GA‐ER/GO composites is 20.7°C higher than the pure resin system, and the 5% weight loss temperature, T_d5, is enhanced approximately 56.6°C. When the BPFR: GA‐ER mass ratio is at 4 : 6 and GO content is 1.0–1.2 wt %, the tensile and impact strengths of composites are 60.97 MPa and 32.08 kJ/m² higher than the pure resin composites, respectively. BPFR/GA‐ER composites have better mechanical properties, and can replace common BPA epoxy resins in the fabrication of composites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42637.     

Synthesis and characterization of new polybenzoxazines from renewable resources for bio‐composite applications

Renewable natural resources such as eugenol, furfurylamine, stearylamine, and jute fiber were used to prepare polybenzoxazine composites. The purity of eugenol which is extracted from clove was confirmed by gas chromatography. FTIR, ¹H, and ¹³C NMR spectroscopic analysis were used to determine the structure of eugenol and the benzoxazine monomers namely 6‐allyl‐3‐furfuryl‐8‐methoxy‐3,4‐dihydro‐2H‐1,3‐benzoxazine (EF‐Bz) and 6‐allyl‐3‐octadecyl‐8‐methoxy‐3,4 dihydro‐2H‐1,3‐benzoxazine (ES‐Bz) synthesized from it. The curing analysis from differential scanning calorimetric analysis shows that the onset of curing is shifted to lower temperature (161°C) for EF‐Bz, when compared with ES‐Bz (174°C). The thermal stability analyzed from thermogravimetric analysis shows that the polybenzoxazine EF‐Pbz has higher thermal stability (T_5% = 361°C) with that of ES‐Pbz (T_5% = 313°C). The storage modulus, tensile, and flexural strength of the EF‐Bz/Jute fiber composite show high value when compared with ES‐Bz/Jute fiber composites. POLYM. COMPOS., 37:1821–1829, 2016. © 2014 Society of Plastics Engineers     

Poly(vinyl pyrrolidone‐co‐octavinyl polyhedral oligomeric silsesquioxane) hybrid nanocomposites: Preparation,thermal properties,and Tg improvement mechanism

A series of poly(vinyl pyrrolidone‐co‐octavinyl polyhedral oligomeric silsesquioxanes) (PVP‐POSS) organic–inorganic hybrid nanocomposites containing different percentages of POSS were prepared via free radical polymerization and characterized by FTIR, high‐resolution ¹H‐NMR, solid‐state ²⁹Si‐NMR, GPC, DSC, and TGA. POSS contents in these nanocomposites can be effectively controlled by varying the POSS feed ratios which can be accurately quantified by FTIR curve calibration. On the basis of ²⁹Si‐NMR spectra, average numbers of reacted vinyl groups of each octavinyl‐POSS macromer are calculated to be 5–7, which depends on POSS feed ratios. Both GPC and DSC results indicate that these nanocomposites display network structure and the degree of crosslinking increases with the increase of the POSS content. The incorporation of POSS into PVP significantly improves their thermal properties (T_g and T_dec) primarily due to crosslinking structure and dipole–dipole interaction between POSS cores and PVP carbonyl groups. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis,thermal and mechanical behavior of a silicon/phosphorus containing epoxy resin

A liquid silicon/phosphorus containing flame retardant (DOPO–TVS) was synthesized with 9,10‐dihydro‐9‐oxa‐10‐phosphapheanthrene‐10‐oxid (DOPO) and triethoxyvinylsilane (TVS). Meanwhile, a modified epoxy resin (IPTS–EP) was prepared by grafting isocyanate propyl triethoxysilane (IPTS) to the side chain of bisphenol A epoxy resin (EP) through radical polymerization. Finally, the flame retardant (DOPO–TVS) was incorporated into the modified epoxy resin (IPTS–EP) through sol–gel reaction between the ethyoxyl of the two intermediates to obtain the silicon/phosphorus containing epoxy resin. The molecular structures of DOPO–TVS, IPTS–EP and the final modified epoxy resin were confirmed by FTIR spectra and ¹H‐NMR, ³¹P‐NMR. Thermogravimetric analysis (TGA), differential scanning calorimetry, and limiting oxygen index were conducted to explore the thermal properties and flame retardancy of the synthesized epoxy resin. The thermal behavior and flame retardancy were improved. After heating to 600°C in a tube furnace, the char residue of the modified resin containing 10 wt % DOPO–TVS displayed more stable feature compared to that of pure EP, which was observed both by visual inspection and scanning electron microscope (SEM). Moreover, the mechanical performance testing results exhibited the modified epoxy resins possessed elevated tensile properties and fracture toughness which is supported by SEM observation of the tensile fracture section. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42788.     

Synthesis and characterization of organo‐soluble fluorinated polyimides

A novel fluorinated diamine monomer with a keto group, 4‐[4‐amino‐2‐trifluoromethyl phenoxy]‐4′‐[4‐aminophenoxy]benzophenone (ATAB) was prepared by reacting dihydroxybenzophenone with 4‐chloronitrobenzene and 2‐chloro‐5‐nitrotrifluoromethylbenzene in the presence of potassium carbonate followed by catalytic reduction with palladized carbon (10%). Fluorinated polyimides IVa–e were synthesized from the diamine mentioned above via a two‐step method (thermal and chemical imidization). Polyimides IVa–e have inherent viscosities in the range 0.65–1.06 dL g^?1 (thermal imidization) and 0.82–1.56 dL g^?1 (chemical imidization). The polyimides prepared by chemical imidization exhibit excellent solubility. Polyimide films exhibit tensile strength, elongation and tensile modulus in the ranges 96–106 MPa, 9–13% and 1.1–1.7 GPa, respectively. The T₁₀ values of the polyimides are in the range 540–598 °C in nitrogen and 545–586 °C in air, with more than 50–60% char yield. They have T_g values between 244 and 285 °C. The prepared polyimides show cut‐off wavelengths in the range 365–412 nm and transmittance at 450 nm in the range 80.9–94.2%. The dielectric constants of the polyimide films are in the range 3.10–3.77 at 1 kHz and 3.04–3.66 at 10 kHz, with moisture absorption of 0.14–0.40%. Copyright © 2006 Society of Chemical Industry     

Synthesis,optical, and thermal properties of polyimides containing flexible ether linkage

The goal of this article was to synthesize a series of flexible polyimides containing ether linkage in main chain and clarified the effect of this ether linkage on some physical properties such as optical and thermal decomposition. Also, different functional group effects such as carbonyl (? C?O), hexa‐fluoro‐isopropylidene [? C(CF₃)₂? ] and phenyl (? C₆H₅) on these physical properties were evaluated. The structural characterization of poly(ether imide)s was performed using Fourier transform infrared, ¹H‐nuclear magnetic resonance (NMR), and ¹³C‐NMR techniques. Optical band gap of polyimides was calculated in the range from 2.57 to 2.81 eV. Thermal characterization of poly(ether imide)s was carried out using thermogravimetry–differential thermal analysis and differential scanning calorimetry. Thermal stability of poly(ether imide)s was evaluated by initial decomposition temperature (T_on) and char. T_on value of polymers was determined in the range from 100 to 195 °C. In addition, glass transition temperatures of poly(ether imide)s were found between 144 and 148 °C. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46573.     

Effect of Al2O3 addition on thermo‐electrical properties of polymer composites: An experimental investigation

To develop a new class of composites with adequately high thermal conductivity and suitably controlled dielectric constant for electronic packages and printed circuit board applications, polymer composites are prepared with microsized Al₂O₃ particle as filler having an average particle size of 80–100 μm. Epoxy and polypropylene (PP) are chosen as matrix materials for this study. Fabrication of epoxy‐based composite is done by hand lay‐up technique and its counterpart PP‐based composite are fabricated by compression molding technique with filler content ranging from 2.5–25 vol%. Effects of filler loading on various thermal properties like effective thermal conductivity (k_eff), glass transition temperature (T_g), coefficient of thermal expansion (CTE) and electrical property like dielectric constant (ε_c) of composites are investigated experimentally. In addition, physical properties like density and void fraction of the composites along with there morphological features are also studied. The experimental findings obtained under controlled laboratory conditions are interpreted using appropriate theoretical models. Results show that with addition of 25 vol% of Al₂O₃, k_eff of epoxy and PP improve by 482% and 498% respectively, T_g of epoxy increases from 98°C to 116°C and that of PP increases from −14.9°C to 3.4°C. For maximum filler loading of 25 vol% the CTE decreases by 14.8% and 26.4% for epoxy and PP respectively whereas the dielectric constants of the composites get suitably controlled simultaneously. POLYM. COMPOS., 36:102–112, 2015. © 2014 Society of Plastics Engineers     

Synthesis and properties of methyl hexahydrophthalic anhydride‐cured fluorinated epoxy resin 2,2‐bisphenol hexafluoropropane diglycidyl ether

The fluorinated epoxy resin, 2,2‐bisphenol hexafluoropropane diglycidyl ether (DGEBHF) was synthesized through a two‐step procedure, and the chemical structure was confirmed by ¹H n uclear magnetic resonance (NMR), ¹³C NMR, and Fourier transform infrared (FTIR) spectra. Moreover, DGEBHF was thermally cured with methyl hexahydrophthalic anhydride (MHHPA). The results clearly indicated that the cured DGEBHF/MHHPA exhibited higher glass transition temperature (T_g 147°C) and thermal decomposition temperature at 5% weight loss (T₅ 372°C) than those (T_g 131.2°C; T₅ 362°C) of diglycidyl ether of bisphenol A (DGEBA)/MHHPA. In addition, the incorporation of bis‐trifluoromethyl groups led to enhanced dielectric properties with lower dielectric constant (D_k 2.93) of DGEBHF/MHHPA compared with cured DGEBA resins (D_k 3.25). The cured fluorinated epoxy resin also gave lower water absorption measured in two methods relative to its nonfluorinated counterparts. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2801–2808, 2013     

Mechanical and thermal performances of epoxy resin/graphitic carbon nitride composites

In this paper, a series of graphitic carbon nitride (g-C₃N₄) was synthesized under different thermal oxidation etching temperatures and epoxy/g-C₃N₄ composites were prepared via solution blending. The morphology and structure of g-C₃N₄ were investigated by transmission electron microscope, X-ray diffraction (XRD), Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The tensile fracture morphology and structure of epoxy resin (EP) composites were demonstrated by scanning electron microscopy and XRD, respectively. Mechanical properties of EP composites were characterized by tensile testing, and the thermal performances were investigated by dynamic mechanical thermal analysis and thermal gravimetric analysis. The results revealed that the active groups on g-C₃N₄ sheets increased under thermal oxidation etching and the C to N ratio of g-C₃N₄ decreased from 0.94 to 0.76 with the increasing etching temperature. Noticeably, the tensile strength of EP composites was enhanced by 58% with the addition of C₃N₄-NS-500 and the thermal properties were also improved significantly, including T_0.5 (the decomposition temperature at the mass loss of 50%) increased by 21.5 °C and glass transition temperature improved by 8 °C. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48598.     

Synthesis,structure, and properties of high‐impact polystyrene/octavinyl polyhedral oligomeric silsesquioxane nanocomposites

The organic–inorganic hybrid nanocomposites from high‐impact polystyrene/octavinyl polyhedral oligomeric silsesquioxane (HIPS/POSS) containing various percentages of POSS were prepared by free radical polymerization and characterized by Fourier transform infrared spectroscopy (FTIR), ¹H‐NMR, thermal gravity analysis (TGA), X‐ray diffraction (XRD), and transmission electron microscopy (TEM). The octavinyl POSS has formed covalent bond connected PS‐POSS hybrid with polystyrene. POSS can well disperse in the composites at the composition of 0.5 and 1 wt%. The mechanical properties and thermostability of HIPS/POSS nanocomposites were significantly improved. The tensile strength, the izod impact strength, and the elongation at break of the nanocomposite containing 1 wt% of POSS was increased, respectively, by 15.73%, 75.62%, and 72.71% in comparison with pristine HIPS. The thermal decomposition temperature of HIPS/POSS (1 wt% of POSS) was 33°C higher than that of pristine HIPS. The HIPS/POSS nanocomposites showed great potential for applications in many fields, such as electric appliance and automotive trim. POLYM. COMPOS. 37:1049–1055, 2016. © 2014 Society of Plastics Engineers     

Preparation and thermal property of hybrid nanocomposites by free radical copolymerization of styrene with octavinyl polyhedral oligomeric silsesquioxane

The poly(styrene‐co‐octavinyl‐polyhedral oligomeric silsesquioxane) (PS–POSS) organic–inorganic hybrid nanocomposites containing various percent of POSS were prepared via one‐step free radical polymerization and characterized by FTIR, high‐resolution ¹H NMR, ²⁹Si NMR, GPC, DSC, and TGA technologies. The POSS contents in these nanocomposites were determined using FTIR calibration curve. The result shows that the POSS contents in nanocomposites can be tailored by varying the POSS feed ratios. On the basis of the POSS contents in the nanocomposites and the ¹H NMR spectra, the number of reacted vinyl groups of each octavinyl‐POSS macromonomer were calculated to be 6–8. DSC and TGA measurements indicate that the incorporation of POSS into PS homopolymer can apparently improve the thermal properties of the polymeric materials. The dramatic T_g and T_dec increases are mainly due to the formation of star and low cross‐linking structure of the nanocomposites, where POSS cores behave as the joint points and hinder the motion and degradation of the polymeric chains. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Preparation of polysiloxane oligomers bearing benzoxazine side groups and tunable properties of their thermosets

A new pathway for the preparation of polysiloxane oligomers bearing benzoxazine side groups were reported via the hydrolysis and co‐polycondensation of benzoxazinyl siloxane (SBZ) with dimethyldiethoxysilane (DEDMS). The structures of SBZ and oligomers were characterized by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) spectroscopy. The average molecular weights of the obtained oligomers were estimated from size exclusion chromatography and ¹H‐NMR to be in the range of 2000–4000. The oligomers gave transparent films by casting in THF solution. The films were further thermally treated to produce crosslinked films via the ring opening polymerization of benzoxazine side group. The effects of siloxane content on polymerization behavior, glass transition temperature, and mechanical properties of the polybenzoxazine thermosets were investigated. Tensile test of the films revealed that the elongation at break increased with increasing siloxane content. The elongation at break of poly(I‐50) was up to 12.1%. Dynamic mechanical analysis of the thermosets showed that the T_gs were in the range of 119–165°C. Thermogravimetic analysis also revealed a better thermal stability as evidenced by the 5% weight loss temperatures in the range of 363–390°C. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40960.     

Synthesis,thermal properties,and flame retardance of phosphorus‐containing epoxy‐silica hybrid resins

A novel epoxy resin modifier, phosphorus‐containing epoxide siloxane (DPS) with cyclic phosphorus groups in the Si O network, was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) with polyhedral‐oligomeric siloxanes, which was synthesized by the sol–gel reaction of 3‐glycidoxypropyltrimethoxysilane. DPS was confirmed by Fourier transform infrared and ²⁹Si NMR measurement, and then was employed to modify epoxy resin at various ratios, with 4,4‐diaminodiphenyl‐methane as a curing agent. In order to make a comparison, DOPO‐containing epoxy resins were also cured under the same conditions. The resulting organic–inorganic hybrid epoxy resins modified with DPS exhibited a high glass transition temperature (T_g), a good thermal stability, and a high limited oxygen index. In addition, the tensile strength of cured products was also rather desirable. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Mechanical and thermal properties of epoxy-POSS reinforced-(biphenyl diol formaldehyde/epoxy hybrid resin) composites

To enhance the properties of epoxy composites, the biphenyl diol formaldehyde resin (BPFR) and glycidyloxypropyl polyhedral oligomeric silsesquioxane (G-POSS) were synthesized and used for modification of fiber-glass reinforced composites of epoxy resin (ER). The BPFR was employed to cure epoxy resin with different G-POSS contents and the laminates of fiber-glass reinforced hybrid composites prepared from BPFR, ER and G-POSS. The dynamic mechanical properties, thermal properties, mechanical and electrical properties of the hybrid composites were characterized by dynamic mechanical analyzer, thermogravimetric analyzer and electroproperty detector. The results showed that the T _g of the composites is increased with the addition of G-POSS. When the content of G-POSS is 5 wt%, the tensile and impact strength of the hybrid composites are 249.87 MPa and 63.83 kJ/m², respectively, which are all 30 % higher than those of non-added composites. At G-POSS content of 7 wt%, T _g of the material is 9.6 °C higher than pure BPFR/ER composite, and the initial decomposition temperature, T _id, is enhanced by about 29 °C. Dielectric constant, ε, and dielectric loss, tanδ, of the hybrid composites are between 0.53–0.7 and between 0.004–0.012, respectively.     

Synthesis,characterization, and properties of silylene–acetylene preceramic polymers

A series of silylene–acetylene preceramic polymers 3a–e were synthesized by polycondensation reaction of dilithioacetylene with dichlorosilane (H₂SiCl₂) or/and methyldichlorosilane (MeSiHCl₂). Their structures were confirmed by infrared spectra (IR), and ¹H and ²⁹Si NMR spectroscopies. Differential scanning calorimetry (DSC) diagrams show exotherms centered at 200 to 233°C temperature range, attributed to crosslinking reaction of the acetylene and Si? H groups. After thermal treatment, the obtained thermosets 4a–e possess excellent thermal stability. Thermogravimetric analysis (TGA) under nitrogen show the T_d5s (temperature of 5% weight loss) for all the thermosets are above 600°C, and the overall char yields are between 95.62% and 89.67% at 900°C. After pyrolysis at 1200°C, the obtained ceramic residues 5a–e exhibit good thermo‐oxidative stability with final weight retention between 98.76% and 91.66% at 900°C under air. In particular, perhydroploy(silylene)ethynylene 3a , which has the highest Si/C ratio in silylene–acetylene polymers, has the highest char yield, and the derived ceramic material 5a displays the best thermo‐oxidative stability. Based on Scanning electron microscopy and its associated energy‐dispersive X‐ray microanalysis (SEM EDX) and ¹³C magic angle spinning nuclear magnetic resonance (MAS NMR) analysis, ceramic 5a contains the highest SiC content. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008