Epoxy acrylate UV/PU dual‐cured wood coatings

For improving the finishing performances of complicated three‐dimensional coated wood products (e.g., furniture) with some shadow zones in the absence of ultraviolet (UV) light, resulting in incomplete curing of UV coatings, the aim of this study was to investigate the characteristics and effects of curing process on the properties of epoxy acrylate UV/PU dual‐cured resin for wood coatings when compared with traditional UV and polyurethane (PU) coatings. The epoxy acrylate oligomer was synthesized for providing a double bond of acryloyl group and a secondary hydroxyl group. The UV/PU dual‐cured coating was formulated with epoxy acrylate resin/tripropylene glycol diacrylate (TPGDA) monomer by the weight ratio of 80/20, 3% dosage of benzil dimethyl ketal as a photoinitiator, and the NCO/OH mole ratio of 1.0. The aromatic polymeric diphenylmethane diisocyanate was used as a hardener. The films of the dual‐cured coating, obtained from UV‐cured or room temperature‐cured process, showed an excellent tensile strength, elongation at break, impact resistance, and lightfastness when compared with traditional UV and PU coatings; especially, the adhesion of UV/PU dual‐cured coating by UV‐cured process was better than that of traditional UV coating. It can therefore be concluded that the epoxy acrylate oligomer‐based dual‐cured coating could readily be used for complicated wood products finishing. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Curing and combustion properties of a PU‐coating system with UV‐reactive phosphazene

A UV‐curable polyurethane (PU)‐coating system containing phosphorus is formulated by the combination of photoinitiator, PU acrylate oligomer, and UV‐reactive phosphazene monomer. PU acrylate oligomer is prepared by the addition of 2‐hydroxyethylmethacrylate (HEMA) to NCO‐terminated PU prepolymer. UV‐reactive phosphazene monomer is derived from the HEMA substitution reaction to hexachlorocyclotriphosphazene (NPCl₂)₃. The curing reaction of this PU‐coating system is carried out by UV irradiation. The resultant UV‐cured PU‐coated films demonstrated better performance properties than those of original UV‐cured PU acrylate (UV‐PU) without UV‐reactive phosphazene monomer. Furthermore, their thermal properties are investigated by a thermogravimetric analyzer and a dynamic mechanical thermal analyzer, respectively. The combustion behaviors of these UV‐cured PU‐coated films are evaluated by the measurements of a limiting oxygen index and a cone calorimeter. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1980–1991, 2002     

UV curable glycidyl carbamate based resins

The synthesis and characterization of UV curable resins based on glycidyl carbamate chemistry have been explored. Glycidyl carbamate (GC) functional resins have been used to obtain crosslinked coatings with a wide range of properties using several crosslinking techniques such as epoxy-amine, self-crosslinking, and sol-gel. GC resin technology was further expanded to UV curable coatings by reacting polyfunctional GC resins with acrylic acid to yield acrylated glycidyl carbamate (AGC) resins. Alcohol-modified UV curable GC resins were also prepared to obtain lower viscosity. Commonly used reactive diluents were used to prepare a UV curable GC coating formulations. The coatings were cured in air using a Fusion LC6B Benchtop Conveyer with an F300 UV lamp. The degree of conversion of acrylic double bonds during UV curing was determined using real time FTIR and showed that the resins had fast cure rates and high extents of conversion of acrylate groups. Coating properties such as hardness, impact strength, methyl ethyl ketone double rubs, flexibility, and adhesion were studied. Dynamic mechanical analysis was used to determine crosslink density of the coatings. Differential scanning calorimetry and thermogravimetric analysis were used to study the thermal properties of the coatings. The type of polyisocyanates and the extent of modification in GC resins influenced the degree of conversion, crosslink density, and coating performance.     

Effect of hyperbranched acrylates on UV‐curable soy‐based biorenewable coatings

Utilization of biorenewable components in UV‐curable coating formulations is both economically and environmentally beneficial, particularly when compared to their petrochemical‐based counterparts. To produce UV‐curable coatings of high biorenewable content with enhanced performance, acrylated epoxidized soybean oil (ASBO) was combined with biorenewable reactive diluent tetrahydrofufuryl acrylate, adhesion promoters, photoinitiator and hyperbranched acrylates (HBAs) as synthetic tougheners. The HBAs were found to impart high functionality and low viscosity, thus increasing crosslinking in the coating network and improving mechanical and thermal properties such as film hardness, adhesion, solvent resistance, impact resistance, tensile modulus and toughness, glass transition temperature and thermal stability. Real‐time Fourier transform infrared spectroscopy showed decreased acrylate conversion when compared with a reference formulation without HBAs, which was attributed to earlier coating network vitrification during UV irradiation. ASBO‐based coatings were also thermally annealed to allow further reaction of unreacted components in the vitrified network. As a result, coating properties were further improved. Overall, the addition of HBAs as synthetic tougheners to UV‐curable ASBO‐based biorenewable coating systems was shown to greatly improve the corresponding coating properties. Copyright © 2010 Society of Chemical Industry     

Effects of small molecular weight silicon‐containing acrylate on kinetics,morphologies, and properties of free‐radical/cationic hybrid UV‐cured coatings

A series of UV‐curable, silicon‐containing mixtures were prepared by adding different micro amounts of small molecular weight silicon‐containing acrylate KH570 to an interpenetrating polymer network system composed of cycloaliphatic polyurethane acrylate, trimethylolpropane triacrylate, cycloaliphatic epoxy resin, free‐radical photoinitiator Irgacure 754 and cationic photoinitiator Irgacure 250 with a weight ratio of 15 : 15 : 65 : 1 : 4. Hybrid coatings with different addition amounts of KH570 (0.2, 0.6, 1.0 wt %) were cured from the mixtures by UV‐initiated free‐radical/cationic dual curing technique. Final reactant conversions and photopolymerization rates of the hybrid UV‐cured coatings were improved with the increase of KH570 content, as evaluated by conversion profiles. The morphologies and microstructures were characterized by scanning electron micro‐scopic, atomic force micrographic, and fourier transform infrared spectrophotometer measurements. Thermal, mechanical, and surface properties of the hybrid UV‐cured coatings were investigated. The increase in KH570 content caused a decrease in mechanical properties besides the breaking elongation. Thermo‐gravimetric analysis revealed that the incorporation of silicon into cross‐linked network structure resulted in high thermal stability. The surface properties of hybrid UV‐cured coatings, such as hardness, contact angle, flexibility, and glossiness were also examined. It is found that transparent hybrid coating with the addition of 1.0 wt % KH570 exhibited a relatively higher contact angle as a direct result of a relatively higher hydrophobic surface. These researches showed that micro amounts of small molecular weight silicon‐containing acrylate could greatly influence the morphologies of liquid nitrogen quenching cross sections and properties of hybrid UV‐cured coatings and could be used to modify UV‐cured coatings for some superior properties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40655.     

Synthesis and kinetic studies of UV‐curable urethane‐acrylates

The UV‐curable urethane‐acrylates based on 2‐hydroxyethyl methacrylate (HEMA)‐terminated polyurethane (PU) for lithographic and coating applications are investigated in this study. Series of PU prepolymers were made from 4,4‐diphenyl methane diisocyanate (MDI), poly(propylene oxide) glycol (PPG 400), poly(butylene adipate)glycol (PBA 500), or poly(tetramethylene oxide) glycol (PTMO 1000) and are terminated with HEMA. The 2,2‐azobisisobutyronitrile (AIBN) was used as a UV‐initiator under air atmosphere. The curing kinetics of HEMA‐terminated PU film were studied. The curing analysis, using FTIR and reaction kinetics, indicate the reaction rate equation correlates well with the film thickness [T], initiator concentration [I], unreacted double bond concentration [C?C], and exposed energy [E] of the reaction system. The kinetic rate equation for the UV‐curable reaction can be written as © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3162–3166, 2004     

Ultraviolet‐curing behavior and mechanical properties of a polyester acrylate resin

Ultraviolet (UV) curing technology has been widely used in many applications because it has several distinct advantages compared to solvent‐based processes or thermal‐curing technology. The effects of photoinitiator types and their contents as well as reactive diluent types and their contents on the UV‐curing behavior and mechanical properties of a UV‐curable polyester acrylate resin were investigated in this study. Three photoinitiators, Irgacure 184, Darocur 1173, and benzophenone, were used in this study. Hexanediol diacrylate, tripropylene glycol diacrylate, and trimethylol propane triacrylate were used as reactive diluents to modify the properties of the acrylate resin. The change of chemical structure during UV curing was monitored by FTIR. A universal testing machine was used to measure the tensile properties of various UV‐cured acrylate films of different compositions. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3921–3928, 2004     

Ultraviolet‐curing behavior of an epoxy acrylate resin system

Ultraviolet (UV)‐curing behavior of an epoxy acrylate resin system comprising an epoxy acrylate oligomer, a reactive diluent, and a photoinitiator was investigated by Fourier transform infrared (FTIR) spectroscopy. The conversion changes of the resin system containing 20 phr of 1,6‐hexanediol diacrylate as a reactive diluent and 2‐hydroxy‐2‐methyl‐1‐phenyl‐propan‐1‐one as a photoinitiator were measured under different UV‐curing conditions. The fractional conversion was calculated from the area of the absorption peak for the vinyl group vibration occurring at 810 cm^?1. The effects of photoinitiator concentration, total UV dosage, one‐step or stepwise UV irradiation, UV intensity, atmosphere, and temperature on the curing behavior of the resin system were investigated. The conversion of the resin system increased rapidly at the initial stage of the UV‐curing process but increased very slowly after that. The final conversion of the resin system was mainly affected by total UV dosage. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1180–1185, 2005     

Preparation and characterization of hybrid thiol‐ene/epoxy UV–thermal dual‐cured systems

Hybrid thiol‐ene/epoxy coatings were prepared by combining thiol‐ene photo‐curable formulations with epoxy monomers, through a dual UV–thermal curing process. An increase in glass transition temperature and in storage modulus was observed for the hybrid thiol‐ene/epoxy coatings when compared with the pristine thiol‐ene UV‐cured system. Also, the bisphenol A moieties introduced into the hybrid networks during the dual‐curing process induced an increase in thermal stability of the cured materials. It has been demonstrated that the addition of epoxy monomer to the thiol‐ene photo‐curable system is a good strategy to follow in order to improve the final properties of thiol‐ene‐based coatings leading to a wide range of possible applications for the hybrid materials. Copyright © 2010 Society of Chemical Industry     

A novel UV‐curable epoxy acrylate resin containing arylene ether sulfone linkages: Preparation,characterization, and properties

UV‐curing processes are used in industrial applications because of their advantages such as high‐speed applications and solvent‐free formulations at ambient temperature. UV‐curable epoxy acrylate resins containing arylene ether sulfone linkages (EAAES) were synthesized through the condensation of bis(4‐chlorophenyl)sulphone and bisphenol‐A, followed by end‐caping of epichlorohydrin and subsequently acrylic acid. UV‐cured coatings were formulated with epoxy acrylates, reactive diluents such as pentaerythritol tri‐acrylate and pentaerythritol dia‐crylate and photoinitiator. Fourier transfer infrared, ¹H NMR, and thermal gravimetrical analysis were employed to investigate the structures and thermal properties of the EAs films. The introduction of EAAES into epoxy acrylate substantially improves its thermal properties and thermo‐oxidative stability at high temperatures. In addition, the acrylate containing arylene ether sulfone linkages can also improve pencil hardness and chemical and solvent resistance of the epoxy acrylate. The obtained UV‐curable epoxy acrylate containing arylene ether sulfone linkages is promising as oligomer for UV‐curable coatings, inks, and adhesives in some high‐tech regions. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41067.     

New self‐curable,aqueous‐based polyurethane system by an isophorone diisocyanate/uretedione aziridinyl derivative process

Uretedione aziridinyl derivative (UAD) was prepared through the dimerization of isophorone diisocyanate and the addition reaction of aziridine to its isocyanate (NCO) end groups. An NCO‐terminated polyurethane (PU) prepolymer was prepared from the addition of isophorone diisocyanate, poly(propylene glycol)s, and dimethylolpropanic acid. A mixture of UAD with the PU prepolymer and its NCO terminal groups were hydrolyzed to form primary amino groups during a water dispersion process. Meanwhile, the uretedione group of UAD reacted with these primary amino groups in the aqueous phase. Then, these aziridine end groups of UAD became part of an aqueous‐based PU and served as latent internal curing agents. The self‐curable, aqueous‐based PU system obtained with this new UAD process is a convenient alternative for improving the performance of aqueous‐based PUs. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 845–859, 2004     

紫外光固化环氧丙烯酸酯的研究进展

环氧丙烯酸酯树脂是紫外光(UV)固化领域中用量最大的一类光固化树脂,具有粘接强度大、硬度高及耐化学药品性等优点,但也存在黏度较大、韧性较差等问题。为了提高环氧丙烯酸酯的综合性能,有必要对其进行改性。介绍了环氧丙烯酸酯的合成基本原理及主要合成条件对树脂的影响,综述了国内外近期对环氧丙烯酸酯改性的主要方法及研究进展,指出了目前环氧丙烯酸酯在涂料中应用存在的主要问题,为今后对环氧丙烯酸酯性能的进一步改进提供了参考。     

UV curable soybean‐oil hybrid systems based on thiol‐acrylate and thiol‐ene‐acrylate chemistry

In this study, epoxidized soybean oil was modified to prepare acrylated epoxidized soybean oil (AESO) and vinyl/acrylate ended soybean oil (VASO), which were blended with mercaptopropyl polyhedral oligomericsilsequioxane (POSS‐SH) to prepare UV curable thiol‐acrylate and thiol‐ene‐acrylate hybrid coatings. Photopolymerization processes of the coatings were measured and the results showed that addition of POSS‐SH obviously increased the conversion of double bond. The physical and mechanical properties of all cured samples were investigated, which indicated that the pencil hardness, tensile strength, and fracture toughness were significantly improved by POSS‐SH. Moreover, with increasing POSS‐SH content, the water contact angles of cured samples were increased, and the water resistance was greatly improved. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42095.     

Self‐curable system of an aqueous‐based polyurethane dispersion via a ring‐opening reaction of azetidine end groups

An azetidine (AZT) containing compound, 3‐azetidinyl propanol was synthesized from methyl acrylate with 3‐amino‐1‐propanol in a four‐step reaction. It was introduced into an isocyanate‐terminated carboxylic acid containing polyurethane (PU) prepolymer as the end group. A single‐component, AZT‐terminated self‐curable aqueous‐based PU dispersion was obtained from the water dispersion process after it was neutralized with triethylamine. Its carboxylic groups served not only as the internal emulsifier stabilizing the aqueous PU dispersion but also as PU self‐curing sites toward its AZT end groups via a ring‐opening reaction. The curing reaction took place on drying and resulted in polymeric network structure formation among the polymers. The performance properties of this self‐cured PU were evaluated in this study. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4383–4393, 2006     

Synthesis and ultraviolet‐curing behaviors of vinyl ether functionalized polyurethane oligomers

The vinyl ether functionalized oligomer is one of the most basic components of vinyl ether functionalized materials for cationic UV‐curable coatings. In this study, three types of vinyl ether functionalized polyurethane oligomers (i.e., polyether, polyester, and polydimethylsiloxane) were synthesized with diisocyanate, diol, and hydroxyethyl vinyl ether. These oligomers were characterized by IR, ¹H‐NMR, and ¹³C‐NMR spectroscopy. The effect of the raw material ratio on the oligomer, UV‐curing behaviors, and thermal properties of these oligomers were investigated. The UV‐curing behavior was analyzed by real‐time Fourier transform infrared spectroscopy. The vinyl ether terminated polyester urethane oligomer exhibited better UV curing, with a higher final conversion and maximum UV‐curing rates. In addition, the light intensity was enhanced for oligomers with better UV‐curing properties. Research on these vinyl ether functionalized oligomers is essential to the development and applications of cationic vinyl ethers systems. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40501.     

Novel reactive diluents for UV/moisture dual‐curable coatings

The novel silicone‐modified polyacrylate reactive diluents for UV/moisture dual‐curable coatings were synthesized from N,N‐bis[3‐(trimethoxysilyl)propyl]amine and multifunctional acrylates such as ethoxylated trimethylolpropane triacrylate and polyethyleneglycol diacrylate through Michael addition reaction. Their structures were characterized by NMR and FTIR and their average molecular weights were determined by vapor pressure osmometry. With FTIR, it was found that the obtained diluents could be cured both by UV radiation and moisture mode. The ²⁹Si‐NMR showed that dimer was the main condensation product at the initial stage of moisture curing. The rheological behavior of the diluents investigated by rotary viscometer indicated they were very close to Newtonian fluid, and the viscosity of coatings decreased evenly with increasing concentration of reactive diluents in the coatings. In particular, they were found to be highly efficient in diluency and reactivity for UV polymerization. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1500–1504, 2005     

UV‐curing and mechanical properties of polyester–acrylate nanocomposites films with silane‐modified antimony doped tin oxide nanoparticles

Antimony doped tin oxide (ATO) nanoparticles were used as nanofillers to improve mechanical properties of UV‐cured polyester–acrylate films. To improve the dispersion of ATO nanoparticles in the polyester–acrylate resin matrix and to strengthen interfacial interactions between ATO nanoparticles and the resin matrix ATO nanoparticles were first organically modified with 3‐methacryloxypropyltrimethoxysilane (MPS). The modification of ATO nanoparticles with MPS was confirmed by FTIR spectroscopy and thermogravimetric analysis (TGA). UV‐curing behaviors of the nanocomposites films were investigated by FTIR spectroscopy. Compared with the film with neat ATO nanoparticles, the film with the same amount of MPS‐modified ATO nanoparticles showed slightly higher UV‐curing rate and final conversion. The mechanical properties of the nanocomposites films were measured by universal testing machine. The MPS‐modified ATO nanoparticles could improve considerably the mechanical properties of the UV‐cured polyester–acrylate nanocomposites films. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and evaluation of epoxy methacrylate UV‐curable coatings containing phthalazinone

Epoxy methacrylate resin (EMA) UV‐curable coatings exhibit high reactivity, low viscosity and excellent chemical resistance in environmentally friendly coatings. A novel EMA containing phthalazinone moieties for high temperature resistant UV‐curable coatings was synthesized. The formulations were cured with hexanediol diacrylate (HDDA) and trimethylol propane triacrylate (TMPTA) as reactive diluents promoted by a photoinitiator, and then interpenetrating polymer networks were generated. The mechanical, chemical and thermal properties of the clear coatings were characterized using Chinese National Standard methods (GB). EMA was used with UV radiation curing in combination with 6.7 wt% of HDDA and 13.4 wt% of TMPTA, and the properties of the cured films were as follows: pencil hardness of 5 H, 30% NaOH resistance for 30 days, 15% HCl resistance for 10 days, 3% NaCl resistance for 30 days and 5% weight loss temperature of 300.5 °C. EMA UV‐curable coatings containing phthalazinone exhibit excellent chemical and thermal stability, and could be potential candidates for UV‐curable zero volatile organic compound coatings applied in the fields of salt spray corrosion, strong radiation and high‐temperature resistance. Copyright © 2009 Society of Chemical Industry     

Synthesis and properties of ultraviolet‐curable resins via a thio–ene (thiol and allyl) addition reaction

Benzophenone diallyl ester (I) and benzophenone tetraallyl ester (II) based on 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) with allyl alcohol (AAL) were synthesized. Glycidyl methacrylate (GMA) was added to I and formed diallyl diglycidyl methacrylate (III). These BTDA‐based allyl‐containing compounds (II and III) reacted with 1,4‐butanedithiol and 4,4′‐thiol‐bisbenzene‐thiol to produce ultraviolet (UV)‐curable resins via a thio–ene addition reaction. The ester (III) was cured easily when exposed to UV or sunlight radiation without any photoinitiator and only required a lower thermal curing temperature. The diallyl ester (I) and tetraallyl ester (II) required the addition of benzophenone to increase the photosensitivity, which reduced the exposition time. These resins used AAL as a monomer to successfully reduce the oxygen effect of the photocuring. The resin BTDA–2Allyl–2GMA had a glass‐transition temperature of 166°C and a hardness of 6H. The resultant UV‐curable coatings had excellent hardness, chemical resistance, adhesion, and tensile properties. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1878–1885, 2002     

Synthesis of cationic UV‐curable methacrylate copolymers and properties of the cured films of their composites with alicyclic epoxy resin

Cationic UV‐curable methacrylate copolymers consisting of glycidyl methacrylate, iso‐butyl methacrylate, and 2,2,3,4,4,4‐hexafluorobutyl methacrylate were synthesized, and their structures were characterized by FTIR, ¹H NMR, and ¹³C NMR. A series of UV‐cured composite films based on the synthesized copolymers and an alicyclic epoxy resin, 3,4‐epoxycyclohexylmethyl‐3,4‐epoxycyclohexanecarboxylate (CE) were obtained through photopolymerization. Their surface contact angle, chemical ability, gloss, light transmittance, thermal behavior, micromorphology, and shrinkage were investigated. Results indicated that these cured resins showed excellent gloss and visible light transmittance; after the combination of the copolymers and CE, and in the presence of fluorine in the curing systems they exhibited relatively fine water resistance, chemical, and thermal stability. It was observed that these copolymers could decrease the degree of the volume shrinkage to CE. The UV‐curable materials may have promising applications in optical fiber coatings, flip chip and Organic Light‐Emitting Diode (OLED) packing. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012