Bio‐nanocomposite films based on cellulose nanocrystals filled polyvinyl alcohol/chitosan polymer blend

Bio‐nanocomposite films based on polyvinyl alcohol/chitosan (PVA/CS) polymeric blend and cellulose nanocrystals (CNC) were prepared by casting a homogenous and stable aqueous mixture of the three components. CNC used as nanoreinforcing agents were extracted at the nanometric scale from sugarcane bagasse via sulfuric acid hydrolysis; then they were characterized and successfully dispersed into a PVA/CS (50/50, w/w) blend to produce PVA/CS–CNC bio‐nanocomposite films at different CNC contents (0.5, 2.5, 5 wt %). Viscosity measurement of the film‐forming solutions and structural and morphological characterizations of the solid films showed that the CNC are well dispersed into PVA/CS blend forming strong interfacial interactions that provide an enhanced load transfer between polymer chains and CNC, thus improving their properties. The obtained bio‐nanocomposite films are mechanically strong and exhibit improved thermal properties. The addition of 5 wt % CNC within a PVA/CS blend increased the Young's modulus by 105%, the tensile strength by 77%, and the toughness by 68%. Herein, the utilization of Moroccan sugarcane bagasse as raw material to produce high quality CNC has been explored. Additionally, the ability of the as‐isolated CNC to reinforce polymer blends was studied, resulting in the production of the aforementioned bio‐nanocomposite films with improved properties. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42004.     

Physicochemical and antibacterial properties of chitosan‐polyvinylpyrrolidone films containing self‐organized graphene oxide nanolayers

Chitosan films have a great potential to be used for wound dressing and food‐packaging applications if their physicochemical properties including water vapor permeability, optical transparency, and hydrophilicity are tailored to practical demands. To address these points, in this study, chitosan (CS) was combined with polyvinylpyrrolidone (PVP) and graphene oxide (GO) nanosheets (with a thickness of ～1 nm and lateral dimensions of few micrometers). Flexible and transparent films with a high antibacterial capacity were prepared by solvent casting methods. By controlling the evaporation rate of the utilized solvent (1 vol % acidic acid in deionized water), self‐organization of GO in the polymer matrix was observed. The addition of PVP to the CS/GO films significantly increased their water vapor permeability and optical transmittance. A blue shift in the optical absorption edge was also noticed. Thermal analysis coupled with Fourier transform infrared spectroscopy suggested that the superior thermal stability of the nanocomposite films was due to the formation of hydrogen bonds between the functional groups of chitosan with those of the graphene oxide. An improved bactericidal capacity of the nanocomposite films against gram‐positive Staphylococcus aureus and gram‐negative Escherichia coli bacteria was also observed. Highly flexible, transparent (opacity of 6.95), and antimicrobial CS/25 vol % PVP/1 wt % GO films were prepared. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43194.     

Convenient approach to making nanocomposites based on a chitosan–poly(vinyl pyrrolidone) polymer matrix and a graphene nanofiller

Conducting, mechanically durable, elastic nanocomposite films were prepared with chitosan (CS) as the polymer matrix, graphene obtained from highly exfoliated graphite as the nanofiller, and poly(vinyl pyrrolidone) (PVP) as the stabilizer of the graphene sheets. The maximum graphene content in the composites without a loss of uniformity and other useful properties increased up to 4.0 wt %. The resulting composites were characterized by scanning electron microscopy, Raman spectroscopy, X‐ray diffraction analysis, mechanical testing, and electrical conductivity testing to determine the effects of the addition of graphene on the morphology and mechanical and electrical properties of the CS–PVP–graphene nanocomposite films. In this study, we took an approach to making nanocomposites from the perspectives of green chemistry, environmental protection, regenerative medicine, and low cost. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45038.     

Dual pH‐ and temperature‐responsive hydrogels with extraordinary swelling/deswelling behavior and enhanced mechanical performances

pH‐ and temperature‐responsive semi‐interpenetrating nanocomposite hydrogels (NC hydrogels) were prepared with surface‐functionalized graphene oxide (GO) as the crosslinker, N‐isopropylacrylamide (NIPAM) as the monomer, and chitosan (CS) as an additive. The effects of 3‐(trimethoxysilyl)propylmethacrylate‐modified GO sheets and CS content on various physical properties were investigated. Results show that PNIPAM/CS/GO hydrogels undergo a large volumetric change in response to temperature. Swelling ratios of PNIPAM/CS/GO hydrogels are much larger than those of the conventional organically crosslinked PNIPAM hydrogels. The deswelling test indicates that the deswelling rate was greatly enhanced by incorporating CS into the hydrogel network and using the surface‐functionalized GO as the crosslinker. The pH‐sensitivity of PNIPAM/CS/GO hydrogels is evident below their volume phase transition temperature. Moreover, the PNIPAM/CS/GO hydrogels have a much better mechanical property compared with traditional hydrogels even in a high water content of 90%. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41530.     

Nanocomposite films of poly(vinylidene fluoride) filled with polyvinylpyrrolidone‐coated multiwalled carbon nanotubes: Enhancement of β‐polymorph formation and tensile properties

To improve interactions between carbon nanotubes (CNTs) and poly(vinylidene fluoride) (PVDF) matrix, multiwalled CNTs (MWCNTs) were successfully coated with amphiphilic polyvinylpyrrolidone (PVP) using an ultrasonication treatment performed in aqueous solution. It was found that PVP chains could be attached noncovalently onto the nanotubes' surface, enabling a stable dispersion of MWCNTs in both water and N,N‐dimethylformamide. PVP‐coated MWCNTs/PVDF nanocomposite films were prepared by a solution casting method. The strong specific dipolar interaction between the PVP's carbonyl group (C?O) and the PVDF's fluorine group C?F₂ results in high compatibility between PVP and PVDF, helping PVP‐coated MWCNTs to be homogenously dispersed within PVDF. Fourier transform infrared and X‐ray diffraction characterization revealed that the as‐prepared nanocomposite PVDF films exhibit a purely β‐polymorph even at a very low content of PVP‐wrapped MWCNTs (0.1 wt%) while this phase is totally absent in the corresponding unmodified MWCNTs/PVDF nanocomposites. A possible mechanism of β‐phase formation in PVP‐coated MWCNTs/PVDF nanocomposites has been discussed. Furthermore, the tensile properties of PVDF nanocomposites as function of the content in PVP‐coated MWCNTs were also studied. Results shows that the addition of 2.0 wt% of PVP‐coated MWCNTs lead to a 168% increase in Young's modulus and a 120% in tensile strength. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Properties and structural characterization of oxide starch/chitosan/graphene oxide biodegradable nanocomposites

Novel chitosan (CS)/oxidized starch (OST)/graphene oxide (GO) nanocomposites (COST/GO‐n) films are prepared in a casting and solvent evaporation method. Fourier transform infrared spectroscopy, X‐ray diffractions, atomic force microscopy, scanning electron microscopy, transmission electron microscopy, thermal gravimetric analysis, tensile testing, and moisture uptake are used to study the structure and properties of these nanocomposites. To indicate the effect of carboxyl groups of OST, some results of the properties of CS/starch/GO nanocomposite (CST/GO‐n) were selected for control experimentation. Compared with the control CST/GO‐n series, COST/GO‐n films, which have the same component ration showed higher tensile strength (σ_b) and lower elongation at break (ε_b). Additionally, in the COST/GO‐n series, the σ_b increased with an increase of GO loading. However, higher proportion of GO could result in aggregations of GO nanosheets and deterioration of the film properties. Compared with the COST/GO‐0, the values of σ_b and water resistance of the COST/GO‐4 containing 2.0 wt % of GO were improved by 57.7 and 20.1%, respectively. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Chitosan–graphene oxide nanocomposites: Effect of graphene oxide nanosheets and glycerol plasticizer on thermal and mechanical properties

In this study, graphite oxide (GO) is synthesized from natural graphite flakes by the modified Hummers method. Characterization by Fourier transform infrared, X‐ray photoelectron, Raman and ultraviolet‐visible spectroscopies, X‐ray diffraction, and thermogravimetric analysis is conducted on GO to confirm the oxidation of graphite. Unplasticized and glycerol plasticized chitosan/graphene oxide (CS/GO) nanosheets nanocomposites with different GO loadings are prepared by solution casting. The combined effect of GO and glycerol on structure, thermal and mechanical properties of nanocomposite films is studied. GO nanosheets are well dispersed throughout the CS matrix due to the hydrogen bonding and electrostatic interactions between CS and GO nanosheets. The incorporation of GO within the CS matrix results in a decrease of the crystallinity, an improvement of thermal stability, and a significant enhancement of the stiffness and tensile strength that is emphasized by the glycerol. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45092.     

Fumed SiO2 nanoparticle reinforced biopolymer blend nanocomposites with high dielectric constant and low dielectric loss for flexible organic electronics

In the present study, fumed silica (SiO₂) nanoparticle reinforced poly(vinyl alcohol) (PVA) and poly(vinylpyrrolidone) (PVP) blend nanocomposite films were prepared via a simple solution‐blending technique. Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–vis), X‐ray diffraction (XRD), and scanning electron microscopy (SEM) were employed to elucidate the successful incorporation of SiO₂ nanoparticles in the PVA/PVP blend matrix. A thermogravimetric analyzer was used to evaluate the thermal stability of the nanocomposites. The dielectric properties such as dielectric constant (?) and dielectric loss (tan δ) of the PVA/PVP/SiO₂ nanocomposite films were evaluated in the broadband frequency range of 10^?2 Hz to 20 MHz and for temperatures in the range 40–150 °C. The FTIR and UV–vis spectroscopy results implied the presence of hydrogen bonding interaction between SiO₂ and the PVA/PVP blend matrix. The XRD and SEM results revealed that SiO₂ nanoparticles were uniformly dispersed in the PVA/PVP blend matrix. The dielectric property analysis revealed that the dielectric constant values of the nanocomposites are higher than those of PVA/PVP blends. The maximum dielectric constant and the dielectric loss were 125 (10^?2 Hz, 150 °C) and 1.1 (10^?2 Hz, 70 °C), respectively, for PVA/PVP/SiO₂ nanocomposites with 25 wt % SiO₂ content. These results enable the preparation of dielectric nanocomposites using a facile solution‐casting method that exhibit the desirable dielectric performance for flexible organic electronics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44427.     

Rheological behavior ‐ Electrical and thermal properties of polypyrrole/graphene oxide nanocomposites

Polypyrrole/graphene oxide (Ppy/GO) nanocomposites were synthesized via in situ polymerization of pyrrole in the presence of GO at various proportions (1–5%). They were characterized to determine their electrical, thermal, and rheological properties by various techniques. The aim of this study was to determine the rheological behavior of Ppy/GO nanocomposite at different mass ratios (100 : 1, 100 : 2, 100 : 3, 100 : 4, and 100 : 5%) and temperature (25–180°C) using a rotational mode in cone‐plate method. The shear stress (τ Pa) and viscosity (η Pa s) values of the nanocomposites increased with the increase in GO mass ratio added to Ppy, which was accompanied by an increased flexibility of the nanocomposites due to the higher aspect ratio of the GO sheet. Hence, it is suggested that the GO sheets are effective for the reinforcement of Ppy thereby significantly improvising its thermal stability, electrical conductivity, and rheological properties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40642.     

Structural characterization of hydrophilic polymer blends/montmorillonite clay nanocomposites

The nanocomposite films comprising polymer blends of poly(vinyl alcohol) (PVA), poly(vinyl pyrrolidone) (PVP), poly(ethylene oxide) (PEO), and poly(ethylene glycol) (PEG) with montmorillonite (MMT) clay as nanofiller were prepared by aqueous solution casting method. The X‐ray diffraction studies of the PVA–x wt % MMT, (PVA–PVP)–x wt % MMT, (PVA–PEO)–x wt % MMT and (PVA–PEG)–x wt % MMT nanocomposites containing MMT concentrations x = 1, 2, 3, 5 and 10 wt % of the polymer weight were carried out in the angular range (2θ) of 3.8–30°. The values of MMT basal spacing d₀₀₁, expansion of clay gallery width W_cg, d‐spacing of polymer spherulite, crystallite size L and diffraction peak intensity I were determined for these nanocomposites. The values of structural parameters reveal that the linear chain PEO and PEG in the PVA blend based nanocomposites promote the amount of MMT intercalated structures, and these structures are found relatively higher for the (PVA–PEO)–x wt % MMT nanocomposites. It is observed that the presence of bulky ester‐side group in PVP backbone restricts its intercalation, whereas the adsorption behavior of PVP on the MMT nanosheets mainly results the MMT exfoliated structures in the (PVA–PVP)–x wt % MMT nanocomposites. The crystallinities of the PEO and PEG were found low due to their blending with PVA, which further decreased anomalously with the increase of MMT concentration in the nanocomposites. The decrease of polymer crystalline phase of these materials confirmed their suitability in preparation of novel solid polymer nanocomposite electrolytes. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40617.     

In situ Synthesis and mechanical,thermal properties of polyimide nanocomposite film by addition of functionalized graphene oxide

Polyimide (PI) and chemical modified graphene oxide nanocomposite films are prepared by in situ polymerization from solutions of pyromellitic dianhydride and 4,4′‐oxydianiline with various amount (0.5–2 wt%) of 3‐aminopropyltriethoxysilane (APTS) functionalized graphene oxide (GO) sheets in dimethylacetamide. The APTS functionalized GO (GO‐APTS) is a versatile platform for polymer grafting, improving excellent dispersion of GO in the PI matrix, and forming strong interaction with the PI matrix. The GO‐APTS/PI nanocomposites exhibited improvement in mechanical and thermal properties by addition of a small amount of GO‐APTS. With the addition of a small amount of GO‐APTS (1.5 wt%) to PI matrix, mechanical properties with the tensile strength and Young's modulus improved by 45% and 15%, respectively. The thermal analysis showed that the thermal stability of PI was slightly enhanced by the incorporation of GO‐APTS (1.5 wt%). This approach provides a strategy for developing high performance functionalized GO‐polymer composite materials. POLYM. COMPOS., 37:907–914, 2016. © 2014 Society of Plastics Engineers     

The synthesis and characteristics of sodium alginate/graphene oxide composite films crosslinked with multivalent cations

Association of a method of the incorporation of graphene oxide (GO) into sodium alginate (Na‐alg) polymer matrix with a method of the use multivalent cations crosslinker was put forward to synthesize novel Na‐alg/GO nanocomposite films. The structures, morphologies, and the properties of Na‐alg/GO films were characterized by Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD), field‐emission scanning electron microscopy (FE‐SEM), thermogravimetric analysis (TGA), and tensile tests. The results revealed that the interlayer distance of GO sheets increased from 0.83 nm to 1.08 nm after assembling with Na‐alg, and Na‐alg inserted into GO layers crosslinking with multivalent cations increased the interlayer distance further. Ionic crosslinking significantly enhanced thermal and mechanical properties of Na‐alg/GO nanocomposite films. In particular, Fe³⁺ led to Na‐alg/GO nanocomposite films of significantly higher tensile strength and modulus than Ca²⁺ and Ba²⁺. The excellent thermal and mechanical properties of these novel Na‐alg/GO nanocomposite films may open up applications for Na‐alg films. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43616.     

EPDM/silicone blend layered silicate nanocomposite by solution intercalation method: Morphology and properties

Ethylene–propylene–diene terpolymer (EPDM)/silicone blend nanocomposites are prepared by solution method for the first time. EPDM and silicone rubber in their 50:50 (by weight) blend is intercalated within the silicate sheets of organically modified montmorillonite. Organic modification to the pristine sodium montmorillonite (Na‐MMT) surfaces is carried out by ion‐exchange reaction using hexadecyl ammonium chloride. The incorporation of such organic functional group makes Na‐MMT hydrophobic and expands the interlayer spacing between silicate sheets. The intercalated structure of EPDM/silicone blend nanocomposites is characterized by the X‐ray diffraction. Transmission electron microscopic characterization visualized the presence of both exfoliated and intercalated layered silicate in the polymer nanocomposites. The mechanical properties of the nanocomposites show a maximum improvement in tensile strength and elongation at break of 23 and 68%, respectively, compared with EPDM/silicone blend. The dielectric measurement demonstrates the increase in relative permittivity for the nanocomposite than the pure blend. The increase in the onset temperature of the thermal degradation of nanocomposites (∼52°C) corresponding to 1 wt% decomposition indicates the enhancement of thermal stability of (EPDM)/silicone blend due to interaction with silicates. POLYM. COMPOS., 35:1834–1841, 2014. © 2014 Society of Plastics Engineers     

Preparation and characterization of epoxy nanocomposites containing surface‐modified graphene oxide

A three‐step grafting procedure has been used to graft the epoxy monomers (DER332) and the curing agents (diamino diphenyl methane (DDM), onto graphene oxide (GO) surface. The surface modification of GO has been performed by grafting of Jeffamine D‐2000, followed with subsequent grafting of DER332 and DDM, respectively. Fourier transform spectroscopy and thermogravimetric analysis indicate successful surface modification. The resulting modified GO, that is, (DED)‐GO, can be well dispersed in the epoxy monomers. The epoxy nanocomposites containing different GO contents can then be prepared through curing processes. The dispersion of GO in the nanocomposites is characterized by transmission electron microscopy. It is found that the tensile strength and elongation at break of epoxy nanocomposite with only 0.2 wt % DED‐GO are increased by 30 and 16% as compared with the neat epoxy resin, respectively. Dynamic mechanical analysis results show that 62% increase in storage modulus and 26°C enhancement in the glass transition temperature of the nanocomposite have been achieved with the incorporation of only 0.2 wt % of DED‐GO into the epoxy. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40236.     

Exceptionally good,transparent and flexible FeS2/poly(vinyl pyrrolidone) and FeS2/poly(vinyl alcohol) nanocomposite thin films with excellent UV‐shielding properties

Composites of nanocrystalline iron disulfide (FeS₂) coated with poly(vinyl pyrrolidone) (PVP) or poly(vinyl alcohol) (PVA) have been successfully synthesized using a solvothermal process, in which PVP and PVA serve as soft templates. Transparent, flexible thin films of these nanocomposites were prepared from homogeneous solution using a solution‐casting approach. X‐ray diffraction and thermogravimetric analysis and energy‐dispersive X‐ray, Fourier transform infrared and UV‐visible absorption spectroscopic techniques were employed to study the structural and optical properties of these nanocomposite films. UV‐visible spectra in transmission mode reveal the UV‐shielding efficiency of these nanocomposite films and the films are found to be exceptionally good for UV‐shielding applications in the wavelength range 200 to 400 nm. The present work aims at developing transparent and flexible UV‐shielding materials and colour filters using cost‐effective and non‐toxic inorganic–polymer nanocomposites. © 2012 Society of Chemical Industry     

A thermomechanical study on selective dispersion and different loading of graphene oxide in polypropylene/polycarbonate blends

Carbon nanofiller reinforced polymeric materials offer the opportunity to obtain materials with desired properties. In the present study, effects of different loading of graphene oxide (GO) on the compatibility, thermomechanical, and morphological properties of incompatible polypropylene (PP)/polycarbonate (PC) polymer blends were investigated. The neat blend and blend nanocomposites were prepared by using a twin‐screw extruder under controlled shear pressure to explore the role of GO on thermomechanical properties of blends. Fourier transform infrared analysis showed the presence of GO in PC phase which was further confirmed by differential scanning calorimetry and morphological analysis. It was observed that up to loading of 0.5%, GO preferable dispersed in only PC phase and then dispersed in both PP and PC phase with further increase in GO loading due to increase in viscosity of PC phase. Field emission scanning electron microscopy investigation of PNCs showed the coalescence of PC phase with increase of GO loading. Tensile analysis confirmed that 1% of GO loading produced highest reinforcement in thermomechanical properties and further increase of GO loading deteriorate the mechanical properties. Dynamic mechanical analysis also showed high storage modulus for 1% loading. Thermal stability of 1% GO loaded nanocomposite was found to be higher than other blend nanocomposites. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45062.     

In situ polymerization of bio‐based thermosetting polyurethane/graphene oxide nanocomposites

Novel bio‐based polyurethane/graphene oxide (GO) nanocomposites have been successfully synthesized from biorenewable epoxidized soybean‐castor oil fatty acid‐based polyols with considerable improvement in mechanical and thermal properties. The GO was synthesized via a modified pressurized oxidation method, and was investigated using Raman spectra, AFM and XPS, respectively. The toughening mechanism of GO in the bio‐based polyurethane matrix was explored. The elongation at break and toughness of polyurethane were increased by 1.3 and 0.8 times with incorporation of 0.4 wt % GO, respectively. However, insignificant changes in both mechanical strength and modulus were observed by adding GO. The results from thermal analysis indicated that the GO acts as new secondary soft segments in the polyurethane which lead to a considerable decrease in the glass transition temperature and crosslink density. The SEM morphology of the fracture surface after tensile testing showed a considerable aggregation of graphene oxide at concentrations above 0.4 wt %. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41751.     

Silver/poly(N‐vinyl‐2‐pyrrolidone) hydrogel nanocomposites obtained by electrochemical synthesis of silver nanoparticles inside the polymer hydrogel aimed for biomedical applications

Silver nanoparticles were produced inside a poly(N‐vinyl‐2‐pyrrolidone) hydrogel (PVP) by an innovative method based on the electrochemical reduction of Ag⁺ ions within the swollen PVP hydrogel. UV‐visible spectroscopy showed the highest value of the absorbance intensity and the lowest values of the wavelength of the absorbance maximum and the full width at the half‐maximum absorbance for the Ag/PVP nanocomposite obtained at 200 V during 4 min. Cyclic voltammetry results suggested an adequate entrapment of the silver nanoparticles. The mechanical properties under bioreactor conditions of the Ag/PVP nanocomposite suggested the possibility of wound dressing application. Silver release from Ag/PVP nanocomposites was confirmed under static conditions as well as by their antimicrobial activity against Staphylococcus aureus. POLYM. COMPOS., 35:217–226, 2014. © 2013 Society of Plastics Engineers     

Electrochemical synthesis and In situ spectroelectrochemistry of conducting NMPy‐TiO2 and ZnO polymer nanocomposites for Li secondary battery applications

Poly(N‐methylpyrrole) (PNMPy), poly(N‐methylpyrrole‐TiO₂) (PNMPy‐TiO₂), and poly (N‐methylpyrrole‐ZnO) (PNMPy‐ZnO) nanocomposites were synthesized by in situ electropolymerization for cathode active material of lithium secondary batteries. The charge–discharging behavior of a Li/LiClO₄/PNMPy battery was studied and compared with Li/LiClO₄/PNMPy‐nanocomposite batteries. The nanocomposites and PNMPy films were characterized by cyclic voltammetry, in situ resistivity measurements, in situ UV–visible, and Fourier transform infra‐red (FTIR) spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The differences between redox couples (ΔE) were obtained for polymer nanocomposites and PNMPy films. During redox scan, a negative shift of potential was observed for polymer nanocomposite films. Significant differences from in situ resistivity of nanocomposites and PNMPy films were obtained. The in situ UV–visible spectra for PNMPy and polymer nanocomposite films show the intermediate spectroscopic behavior between polymer nanocomposites and PNMPy films. The FTIR peaks of polymer nanocomposite films were found to shift to higher wavelengths in PNMPy films. The SEM and TEM micrographs of nanocomposite films show the presence of nanoparticle in PNMPy backbone clearly. The result suggests that the inorganic semiconductor particles were incorporated in organic conducting PNMPy, which consequently modifies the properties and morphology of the film significantly. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41526.     

Characterization and performance of dodecyl amine functionalized graphene oxide and dodecyl amine functionalized graphene/high‐density polyethylene nanocomposites: A comparative study

Dodecyl amine (DA) functionalized graphene oxide(DA‐GO) and dodecyl amine functionalized reduced graphene oxide (DA‐RGO) were produced by using amidation reaction and chemical reduction, then two kinds of well dispersed DA‐GO/high‐density polyethylene (HDPE) and DA‐RGO/HDPE nanocomposites were prepared by solution mixing method and hot‐pressing process. Thermogravimetric, X‐ray photoelectron spectroscopy, Fourier transforms infrared spectroscopy, X‐ray diffractions, and Raman spectroscopy analyses showed that DA was successfully grafted onto the graphene oxide surface by uncleophilic substitution and the amidation reaction, which increased the intragallery spacing of graphite oxide, resulting in the uniform dispersion of DA‐GO and DA‐RGO in the nonpolar xylene solvent. Morphological analysis of nanocomposites showed that both DA‐GO and DA‐RGO were homogeneously dispersed in HDPE matrix and formed strong interfacial interaction. Although the crystallinity, dynamic mechanical, gas barrier, and thermal stability properties of HDPE were significantly improved by addition of small amount of DA‐GO or DA‐RGO, the performance comparison of DA‐GO/HDPE and DA‐RGO/HDPE nanocomposites indicated that the reduction of DA‐GO was not necessary because the interfacial adhesion and aspect ratio of graphene sheets had hardly changed after reduction, which resulting in almost the same properties between DA‐GO/HDPE and DA‐RGO/HDPE nanocomposites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39803.