The influence of filler treatment on the properties of TPU/PP blends: I. Thermal properties and stability

Commercially available organosilane (3‐glycidoxypropyltrimethoxysilane (GPTMS)) coupling agent was used to treat talc in order to improve the affinity relative between the filler and the polymer in composites as well as filler and polymer in the thermoplastic polyurethane/polypropylene (TPU/PP) blends (talc content was 5 wt%). The talc particles were first modified with GPTMS and then introduced into TPU, PP as well as TPU/PP blends with different weight ratios of polymers using blending method and subsequently injection molded in a hydraulic press. The aim was to report the effect of silane coupling agent on the thermal and morphological properties of talc filled composites and blends. The results showed that the thermal properties of the TPU, PP composites and TPU/PP blends were improved with the addition of silane treated talc (higher melting (T_m), crystallization (T_c) temperatures and degree of crystallinity (χ_c)). The glass transition temperature (T_g) obtained by dynamic mechanical analysis (DMA) of the TPU soft segments in TPU/PP blends increased with the addition of untreated and silane treated talc due to lower mobility of the soft segments in TPU and better miscibility of TPU and PP. TPU/PP blends with the silane treated talc show better thermal stability than the TPU/PP blends with untreated talc. POLYM. ENG. SCI., 55:1920–1930, 2015. © 2014 Society of Plastics Engineers     

Mechanical properties,morphology, and crystallization behavior of polypropylene/elastomer/talc composites

In this study, polypropylene/ethylene–octene copolymer (PP/POE) blends, PP/talc, and PP/POE/micro‐talc (MT) composites were fabricated using a twin screw. To estimate the performances of the PP/POE blends, PP/talc, and PP/POE/MT composites, mechanical properties, heat deflection temperature (HDT), thermomechanical analysis, and isothermal crystallization characterization were conducted. Incorporating talc particles increased the tensile strength, flexural properties, and HDT of the PP matrix, but reduced the elongation at break and notched impact strength. The inclusion of POE elastomers in the PP matrix yielded the opposite effect on PP/talc composites. PP/POE/MT composites provide a compromise that improves both the flexural properties and notched impact strength. Moreover, the inclusion of talc particles in PP/POE blends induced heterogeneous nucleation and considerably reduced the crystallization time. Consequently, the time required for processing was also greatly reduced. POLYM. COMPOS., 36:69–77, 2015. © 2014 Society of Plastics Engineers     

Effects of nanotalc inclusion on mechanical,microstructural, melt shear rheological,and crystallization behavior of polyamide 6‐based binary and ternary nanocomposites

The objective of the study is to investigate the effect of inclusion of nanotalc on the strength properties of polyamide 6 (PA6)‐based binary and ternary nanocomposites. Binary nanocomposites were prepared by melt compounding of PA6 with varying content of nanotalc (1, 2, and 4 wt%). Ternary nanocomposites were prepared by melt compounding of compatibilized blend of PA 6 and ethylene‐co‐butyl acrylate (EBA elastomer) with varying content of nanotalc (1, 2, and 4 wt%). Both the binary and ternary nanocomposites registered a very high improvement in the strength/stiffness‐related properties at lower filler loading of 1 wt%. Phase morphology of the composites studied by SEM, TEM, and XRD revealed the formation of extended brane‐like structures and delaminated talc layers in the binary nanocomposites. The modulus predicted by Halpin‐Tsai and Mooney equation suggests that the composites retained a very good aspect ratio after melt mixing. Orientation effects of nanotalc enhanced the melt flow behavior in the composites. POLYM. ENG. SCI., 50:1978–1993, 2010. © 2010 Society of Plastics Engineers     

Toughening and compatibilization of polypropylene/polyamide‐6 blends with a maleated–grafted ethylene‐co‐vinyl acetate

In this article, maleated–grafted ethylene‐co‐vinyl acetate (EVA‐g‐MA) was used as the interfacial modifier for polypropylene/polyamide‐6 (PP/PA6) blends, and effects of its concentration on the mechanical properties and the morphology of blends were investigated. It was found that the addition of EVA‐g‐MA improved the compatibility between PP and PA6 and resulted in a finer dispersion of dispersed PA6 phase. In comparison with uncompatibilized PP/PA6 blend, a significant reduction in the size of dispersed PA6 domain was observed. Toluene‐etched micrographs confirmed the formation of interfacial copolymers. Mechanical measurement revealed that the addition of EVA‐g‐MA markedly improved the impact toughness of PP/PA6 blend. Fractograph micrographs revealed that matrix shear yielding began to occur when EVA‐g‐MA concentration was increased upto 18 wt %. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99:3300–3307, 2006     

Mechanical,morphological, and thermal properties of nanotalc reinforced PA6/SEBS‐g‐MA composites

Ternary butylene‐styrene‐g‐maleic anhydride (SEBS‐g‐MA) (100/20 w/w) blend with varying content of nanotalc (1, 3, and 5 wt %) were prepared by melt compounding followed by injection molding. Thermal properties were investigated by thermogravimetric analysis (TGA) and the results show that the thermal properties of nanocomposites are slightly improved by the addition of nanotalc content. The morphology of nanocomposites using wide angle X‐ray diffraction (WAXD) and transmission electron microscopy (TEM) revealed the delamination of talc layers in the ternary nanocomposites. The dynamic mechanical properties of the samples were analyzed by using dynamic mechanical thermal analyzer (DMTA). The results show that the storage modulus of the blend monotonically increased while tan δ curve show the diffuse pattern with the nanotalc content. The mechanical properties of PA6/SEBS‐g‐MA nanocomposites were studied by tensile, flexural, and impact tests. The tensile and flexural properties continuously increased while izod impact and elongation‐at‐break decreased with nanotalc content. Various theoretical predictive models were used to correlate tensile modulus with the experimental data. The experimental data shows the positive deviation with the applied models. Bela Pukanszky model has been used to calculate the value of parameter B by employing tensile strength data. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41381.     

Maleic anhydride grafted thermoplastic elastomer as an interfacial modifier for polypropylene/polyamide 6 blends

A maleic anhydride grafted thermoplastic elastomer (TPE_g) was prepared. The effect of the TPE_g on the morphology and performance of polypropylene (PP)/polyamide 6 (PA‐6) blends was studied. The final properties of the blends were tuned through variations in the TPE_g/PA‐6 ratios and TPE_g and PA‐6 percentages in the blends. Scanning electron micrographs showed that the TPE_g greatly improved the homogeneity of the blends, and this led to better mechanical performance. The nonisothermal crystallization behaviors of PP and PA‐6 in the blends, revealed by differential scanning calorimetry, were different from those of pure PP and PA‐6. The crystallization temperature and rate of PP were promoted by the PA‐6 component because of its nucleating effect, whereas stepwise crystallization was detected for PA‐6 in the PP/PA‐6 blends when the TPE_g was added. On the basis of these observations, a schematic model was proposed for these blends. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1806–1815, 2004     

Melt rheological properties of polypropylene–polyamide6 blends compatibilized with maleic anhydride‐grafted polypropylene

The melt rheological properties of binary uncompatibilized polypropylene–polyamide6 (PP–PA6) blends and ternary blends compatibilized with maleic anhydride‐grafted PP (PP–PP‐g‐MAH–PA6) were studied using a capillary rheometer. The experimental shear viscosities of blends were compared with those calculated from Utracki's relation. The deviation value δ between these two series of data was obtained. In binary PP–PA6 blends, when the compatibility between PP and PA6 was poor, the deformation recovery of dispersed PA6 particles played the dominant role during the capillary flow, the experimental values were smaller than those calculated, and δ was negative. The higher the dispersed phase content, the more deformed the droplets were and the lower the apparent shear viscosity. Also, the absolute value of δ increased with the dispersed phase composition. In ternary PP–PP‐g‐MAH–PA6 systems, when the compatibility between PP and PA6 was enhanced by PP‐g‐MAH, the elongation and break‐up of the dispersed particles played the dominant role, and the experimental values were higher than calculated. It was observed that the higher the dispersion of the PA6 phase, the higher the δ values of the ternary blends and the larger the positive deviation. Unlike uncompatibilized blends, under high shear stress with higher dispersed phase content, the PP‐g‐PA6 copolymer in compatibilized blends was pulled out from the interface and formed independent micelles in the matrix, which resulted in reduced total apparent shear viscosity. The δ value decreased with increasing shear stress. Copyright © 2006 Society of Chemical Industry     

Cover Image,Volume 138, Issue 9

Blends of polypropylene (PP), polyamide 6 (PA6), and biodegradable polymers (BPs) such as poly(D,L-lactic acid) (PDLLA), poly(lactic acid-co-ε-caprolactone) (poly[LA-co-ε-CL]) and poly(ε-caprolactone) (PCL) were prepared using a twin-screw mini-extruder. The composition of the blend PP/PA6 was fixed at a mass proportion of 70/30, and the compatibilized blends contain 5 wt% of each BP. The morphology observed through scanning electronic microscopy, the dynamic mechanical thermal properties (DMTA), and the biodegradation test after composting and performing optical microscopy (OM) of the blends were investigated. The blend PP/PA6 compatibilized with polypropylene grafted with maleic anhydride (PPMA) was also obtained and used as a reference. The results showed that the PP/PA6/PPMA revealed a more homogeneous morphology and resulted in higher modulus; nevertheless, the sample obtained with the lower molar mass PDLLA as an alternative for PPMA showed a storage modulus behavior close to the reference material. Poly(LA-co-ε-CL) and PCL also showed changes in the morphology of the PA6 dispersed phase. Positive results were observed in the biodegradation test examined by OM for all samples containing BPs. The novelty of this work was to employ BPs as compatibilizing agents of the blends comprising PP/PA6, producing ternary blends with superior mechanical properties due to the better dispersion of the phases.     

Study on the microstructures and mechanical behaviour of compatibilized polypropylene/polyamide‐6 blends

A series of blends of polypropylene (PP)–polyamide‐6 (PA6) with either reactive polyethylene–octene elastomer (POE) grafted with maleic anhydride (POE‐g‐MA) or with maleated PP (PP‐g‐MA) as compatibilizers were prepared. The microstructures and mechanical properties of the blends were investigated by means of tensile and impact testing and by scanning electron microscopy and transmission electron microscopy. The results indicated that the miscibility of PP–PA6 blends was improved with the addition of POE‐g‐MA and PP‐g‐MA. For the PP/PA6/POE‐g‐MA system, an elastic interfacial POE layer was formed around PA6 particles and the dispersed POE phases were also observed in the PP matrix. Its Izod impact strength was four times that of pure PP matrix, whilst the tensile strength and Young's modulus were almost unchanged. The greatest tensile strength was obtained for PP/PA6/PP‐g‐MA blend, but its Izod impact strength was reduced in comparison with the pure PP matrix. © 2002 Society of Chemical Industry     

Morphology and properties of PET/PA‐6/SiO2 ternary composites

A kind of hydrophilic nano‐SiO₂ was applied to poly(ethylene terephthalate)/polyamide‐6 (PA‐6) blends. Melt‐blended composites were prepared at various component ratios and different nano‐SiO₂ levels. Mechanical, morphological, dynamic mechanical, and thermal tests were carried out to characterize the properties, morphology, and compatibilization of the composites. Increased impact strength, tensile strength, and modulus were observed by adding nano‐SiO₂ particles in the blends. The nano‐SiO₂ particles were found to be preferentially dispersed in PA‐6, resulting in an increase of glass transition temperature and crystallization of PA‐6. The mechanism of morphology and properties changes was discussed based on the selective dispersion of nano‐SiO₂ particles in the blends. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2288–2296, 2007     

Ternary polymer blends of polyamide 6, polypropylene,and acrylonitrile‐butadiene‐styrene: Influence of multiwalled carbon nanotubes on phase morphology,electrical conductivity,and crystallization

Ternary polymer blends of 80/10/10 (wt/wt/wt) polyamide6 (PA6)/polypropylene (PP)/acrylonitrile‐butadiene‐styrene (ABS), PP/PA6/ABS, and ABS/PP/PA6 were prepared in the presence of multiwalled carbon nanotubes (MWCNTs) by melt‐mixing technique to investigate the influence of MWCNTs on the phase morphology, electrical conductivity, and the crystallization behavior of the PP and PA6 phases in the respective blends. Morphological analysis showed the “core–shell”‐type morphology in 80/10/10 PA6/PP/ABS and 80/10/10 PP/PA6/ABS blends, which was found to be unaltered in the presence of MWCNTs. However, MWCNTs exhibited “compatibilization‐like” action, which was manifested in a reduction of average droplet size of the dispersed phase/s. In contrast, a separately dispersed morphology has been found in the case of 80/10/10 ABS/PP/PA6 blends in which both the phases (PP and PA6) were dispersed separately in the ABS matrix. The electrical percolation threshold for 80/10/10 PA6/PP/ABS and 80/10/10 PP/PA6/ABS ternary polymer blends was found between 3–4 and 2–3 wt% of MWCNTs, respectively, whereas 80/10/10 ABS/PP/PA6 blends showed electrically insulating behavior even at 5 wt% of MWCNTs. Nonisothermal crystallization studies could detect the presence of MWCNTs in the PA6 and the PP phases. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Functionalized elastomeric compatibilizer in PA 6/PP blends and binary interactions between compatibilizer and polymer

Superior impact properties were obtained when maleic anhydride grafted styrene ethylene/butylene styrene block copolymer (SEBS-g-MAH) was used as a compatibilizer in blends of polyamide 6 (PA 6) and isotactic polypropylene (PP), where polyamide was the majority phase and polypropylene the minority phase. The optimum impact properties were achieved when the weight relation PA:PP was 80:20 and 10 wt% SEBS-g-MAH was added. The blend morphology was systematically investigated. Transmission electron microscopy (TEM) indicated that the compatibilizer forms a cellular structure in the PA phase in addition to acting as an interfacial agent between the two polymer phases. In this cellular-like morphology the compatibilizer appears to form the continuous phase, while polyamide and polypropylene form separate dispersions. In microscopy, PA appeared as a fine dispersion and PP as a coarse dispersion. The mechanical properties indicated that in fact PA, too, is continuous, and the blend can be interpreted as possessing a modified semi-interpenetrating network (IPN) structure with separate secondary dispersion of PP. The coarser PP dispersion plays an essential role in impact modification. Binary blends of the compatibilizer and one blend component were also investigated separately. The same cellular structure was observed in the binary PA/SEBS-g-MAH blends, and SEBS-g-MAH again appeared to form the continuous phase when the elastomer concentration was at least 10 to 20 wt%. By contrast, in PP/SEBS-g-MAH only conventional dispersion of elastomeric SEBS-g-MAH was observed up to 40 wt% elastomer. Impact strength was improved and the elastic modulus was lowered in both PA/SEBS-g-MAH and PP/SEBS-g-MAH blends when the elastomer content was increased. The changes in modulus indicate that the semi-IPN-like structure is formed in the binary PA/SEBS-g-MAH blends as well as in the ternary structure.     

Reactive blending of modified polypropylene and polyamide 12: Effects of compatibilizer content on crystallization and blend morphology

The crystallization behavior and morphology of nonreactive and reactive melt‐mixed blends of polypropylene (PP) and polyamide (PA12; as the dispersed phase) were investigated. It was found that the crystallization behavior and the size of the PA12 particles were dependent on the content of the compatibilizer (maleic anhydride–modified polypropylene) because an in situ reaction occurred between the maleic anhydride groups of the compatibilizer and the amide end groups of PA12. When the amount of compatibilizer was more than 4%, the PA12 did not crystallize at temperatures typical for bulk crystallization. These finely dispersed PA12 particles crystallized coincidently with the PP phase. The changes in domain size with compatibilizer content were consistent with Wu's theory. These investigations showed that crystallization of the dispersed phase could not be explained solely by the size of the dispersion. The interfacial tension between the polymeric components in the blends may yield information on the fractionation of crystallization. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3187–3192, 2006     

Surface‐modified talc particles by acetoxy groups grafting: Effects on mechanical properties of polypropylene/talc composites

This article deals with the effects of surface‐modified talc particles on mechanical properties of polypropylene (PP)/talc composites. These materials were prepared by injection molding of PP blended with different concentrations of nontreated and treated talc, under the same processing conditions. Differential thermal calorimetry and scanning electron microscopy were used to assess thermal properties and morphology of the final composites. The reinforcing effect of talc, either treated or nontreated surface, on PP is analyzed through the tensile properties as a function of the mineral content (0–10 wt%). Morphological structure of composites revealed that the talc treatment improved the particle dispersion and distribution within the PP matrix and enhanced the interfacial PP‐talc adhesion. The mechanical properties of these composites, especially the Young modulus, tensile strength and elongation at break, were found to be improved respect to PP‐untreated talc ones. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Artificial weathering effect on the structure and properties of polypropylene/polyamide‐6 blends compatibilized with PP‐g‐MA

The degradation of uncompatibilized and compatibilized PP/PA‐6 (70/30 wt %) with PP‐g‐MA under accelerated UV light was investigated using Fourier Transform Infrared Spectroscopy (FTIR) spectroscopy, melt flow index (MFI) tester, tensile test, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). FTIR analysis of the structure of the compatibilized and uncompatibilized blends after exposure to UV light showed the formation of photoproducts corresponding to both components. The MFI and mechanical results obtained revealed that photooxidation started primarily in PA‐6 rather than PP. In addition, the uncompatibilized blends exhibited a higher degradation rate compared to neat polymers for long exposure time, and the addition of PP‐g‐MA increased slightly their ageing rate in accordance with TGA data. Further, DSC analysis showed an increase in the crystallinity index and a decrease in the melting temperature of PP and PA‐6 after UV exposure either as neat polymers or as blend components. SEM micrographs of the cryo‐fractured surfaces of the samples illustrated the formation of cracks and fractures after UV irradiation. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41722.     

多单体接枝聚丙烯对PP/PA6共混物形态及力学性能的影响

用同向双螺杆挤出机制备了马来酸酐(MAH)、苯乙烯(St)多单体熔融接枝聚丙烯[PP-g-(St-MAH)],将其作为增容剂在Haake转矩流变仪上与PP/PA6共混得到PP/PA6/PP-g-(St-MAH)共混物,并对共混物的性能及结构进行了表征。结果表明,该增容剂明显改善了共混物的力学性能,当增容剂含量为15~20份时,共混物的冲击强度和拉伸屈服强度达最大值。采用扫描电子显微镜观察共混物试样断面的形态,发现分散相的粒径明显减小,且分散均匀。     

In situ fibrillation of polypropylene/polyamide 6 blends: Effect of organoclay addition

In situ fibrillation of PP/PA6 blends (85/15 wt %) is investigated in presence of two kinds of organically modified montmorillonite, differing by the polarity of their surfactant. The organoclay is primary dispersed either in the PP (for the low‐polarity Cloisite® 15A) or in the PA6 (for the high‐polarity Cloisite® 30B), according to its assumed affinity. In absence of organoclay, a fibrillar morphology is achieved after the melt‐blending and hot‐stretching step, as evidenced by SEM analysis. Upon clay addition, different morphological trends are evidenced. The C15A leads to a refinement of the fibrils whether the C30B induces a transition from fibrillar to nodular structure. These trends are ascribed to drastic changes in viscosity and elasticity ratios, due to the filler initial localization. Several techniques (DSC, STEM) point out a C15A migration from the PP to the PP/PA6 interface. Rheological measurements highlight the possibility of a double‐percolation phenomenon, linked to the fibrillar microstructure of the PP/PA6/C15A blend. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41680.     

Blending PP with PA6 industrial wastes: Effect of the composition and the compatibilization

Blending polypropylene to recycled PA6 industrial wastes at different compositions, with and without compatibilizer PPgMA was produced in a corotating twin screw extruder where, polypropylene acts as the polymer matrix and polyamide as the dispersed phase. Several techniques were used to investigate the morphology, thermal, viscoelastic and tensile properties of these blend. Binary PP/PA6 blends showed the presence of PA6 particles dispersed in the PP continuous phase and exhibited a coarse morphology. Increasing PA6 contents in the blend increased their crystallinity and their size and improved the tensile properties at weak deformation. In addition to compatibilizer PPgMA, the morphology shows lower diameters and a decrease in size of the dispersed PA6 particles. The interfacial adhesion was also improved, as a result of the creation of an interphase that was formed by the interaction between the formed PPgPA6 copolymer in situ and both phases. This interphase induced an improvement in tensile properties. The PPgPA6 copolymer generated by the interphase was identified with DMA analysis thanks to an additional transition in loss modulus curves. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Toughening of PA6 nanocomposites by reactive acrylonitrile–butadiene–styrene core–shell rubber particles

The effect of addition of organoclay and the reactive ABS‐g‐MA core‐shell particles on the mechanical properties and morphology of blends of polyamide (PA6) were reported. The reactive rubber particles with core‐shell structure were selected as modifier instead of conventional reactive bulk rubber. The microstructure of the ternary nanocomposites was characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). Impact strength and stress–strain behavior of blends were measured as a function of organoclay content and core/shell ratio of ABS‐g‐MA. The organoclay plates affected the interfacial adhesion between polyamide and the core‐shell particles because of a shielding effect of organclay on the interacting of amine end groups of PA6 with the MA groups of ABS‐g‐MA. The poor dispersion behavior of ternary nanocomposites was observed when the core/shell ratio is 80/20, and with an increase of organoclay content, the core/shell dispersed phase size increased. Blends based on the maleated elastomer with the core/shell ratio 60/40 gave a more beneficial balance of toughness versus stiffness. POLYM. COMPOS., 35:864–871, 2014. © 2013 Society of Plastics Engineers     

Influences of component ratio of minor phases and charge sequence on the morphology and mechanical properties of PP/PS/PA6 ternary blends

In this study, influences of both component ratio of minor phases and charge sequence on the morphology and mechanical performance in typical ternary blends, polypropylene (PP)/polystyrene (PS)/polyamide-6 (PA6), have been studied. Reactive compatibilization of the blends has been carried out using multi-monomer melt grafted PP with anhydride groups and styrene segments. For uncompatibilized blends, scanning electron microscope (SEM) and selective solvent extraction showed that the blends presented a core–shell morphology with PS as shell and PA6 as core in the PP matrix, in spite of the component ratio and charge sequence. The shell thickened and droplet size decreased with increasing the PS/PA6 component ratio. While for compatibilized blends, the addition of compatibilizers resulted in a significant reduction of the dispersed droplet size and the phase structure of the dispersed phases was greatly dependent on the charge sequence. When the blending of PA6, g-PP, and PP are preceded, the encapsulation structure reversed into the structure of PS phase encapsulated by PA6 phase, which led to better tensile and flexural strength of the blends.