Step-zoom dual-field-of-view infrared telescope

The design of a dual-field-of-view telescope for an 8-12-microm imaging waveband is described. Preliminary calculations are made to determine the first-order parameters of the narrow- and the wide-field modes. To achieve a switchable dual-field-of-view system, one use an optical configuration based on the axial motion of a single lens group along the optical axis. The same lens is also used for focusing at near objects and for athermalization by small axial movement. A total of six lenses with one conic surface are used in the design, making the telescope cost effective and lightweight. The final optical design is presented, along with the aberrations curves and modulation transfer function plots, showing excellent performance in both fields of view.     

Thin infrared imaging systems through multichannel sampling

The size of infrared camera systems can be reduced by collecting low-resolution images in parallel with multiple narrow-aperture lenses rather than collecting a single high-resolution image with one wide-aperture lens. We describe an infrared imaging system that uses a three-by-three lenslet array with an optical system length of 2.3 mm and achieves Rayleigh criteria resolution comparable with a conventional single-lens system with an optical system length of 26 mm. The high-resolution final image generated by this system is reconstructed from the low-resolution images gathered by each lenslet. This is accomplished using superresolution reconstruction algorithms based on linear and nonlinear interpolation algorithms. Two implementations of the ultrathin camera are demonstrated and their performances are compared with that of a conventional infrared camera.     

实时监测激光核聚变靶球涂敷状态的CCD成像系统设计

介绍一种CCD成像系统的设计,它可应用于连续监测直径0.1-0.3mm的激光核聚变靶球涂敷时的实时状态。这个系统利用现成照相物镜和变焦显微物镜二次成像,配以场镜压缩轴外光线,和CCD传感器相组合,设计斜向视场上的二维扫描机构构成了可在8.2mm×44mm全视场扫描检测的CCD扫描成像系统,无论是空间分辨力或时间分辨力都达到了实时监测的要求,大大提高了靶球膜层的涂敷效率。     

光点位置测量系统摄像镜头设计

针对使用线阵列电荷耦合器件(CCD)的二维位置定位系统中的光学系统的特殊要求,本文提出一种以球面镜作为前组柱面镜作为后组,前组像面作为后组物面的二级成像结构作为线阵CCD的摄像镜头.该镜头使具有相同一维坐标值的点成像为同一条直线,并且具有广角视场,畸变小,成像质量优良等性能特点.对其设计思想、像差特点进行了分析,并给出了f'=.20 mm,2ω=74,畸变小于1.6%的柱面镜摄像镜头实例及其像差和传递函数计算曲线.     

Combined Twyman-Green and Mach-Zehnder interferometer for microlens testing

A new interferometer design for microlens testing is presented. The phase-shifting system combines the advantages of a Twyman-Green and a Mach-Zehnder interferometer and permits full characterization of the aberrations of microlenses as well as radius of curvature and focal length measurements. The Twyman-Green system is applied to surface testing in reflection (single reflection), whereas the Mach-Zehnder system is used for lens testing in transmission (single pass). Both measurements are performed without removal of the test part, allowing for combination of the results without confusion of the actual lens and without an azimuthal orientation error. The interferometer setup is explained, the test procedure is described, and experimental results are given.     

Wide-viewing-angle integral three-dimensional imaging system by curving a screen and a lens array

A wide-viewing-angle integral three-dimensional imaging system made by curving a screen and a lens array is described. A flexible screen and a curved lens array are incorporated into an integral imaging system in place of a conventional flat display panel and a flat lens array. One can effectively eliminate flipped images by adopting barriers. As a result, the implemented system permits the limitation of viewing angle to be overcome and the viewing angle to be expanded remarkably. Using the proposed method, we were able to achieve a viewing angle of 33 degrees (one side) for real integral imaging and 40 degrees (one side) for virtual integral imaging, which is four times wider than that of the currently used conventional techniques. The principle of the implemented system is explained, and some experimental results are presented.     

Illumination system design for a three-aspherical-mirror projection camera for extreme-ultraviolet lithography

A scanning critical illumination system is designed to couple a synchrotron radiation source to a three-aspherical-mirror imaging system for extreme ultraviolet lithography. A static illumination area of H x V = 8 mm x 3 mm (where H is horizontal and V is vertical) can be obtained. Uniform intensity distribution and a large ring field of H x V = 150 mm x 3 mm can be achieved by scanning of the mirror of the condenser. The coherence factor (varsigma) of this illumination system is ~0.6, with the same beam divergence in both the horizontal and the vertical directions. We describe the performance of the imaging optics at varsigma = 0.6 to confirm that the illumination optics can meet the requirements for three-aspherical-mirror imaging optics with a feature size of 0.06 mum.     

Optical transfer function shaping and depth of focus by using a phase only filter

The design of a desired optical transfer function (OTF) is a common problem that has many possible applications. A well-known application for OTF design is beam shaping for incoherent illumination. However, other applications such as optical signal processing can also be addressed with this system. We design and realize an optimal phase only filter that, when attached to the imaging lens, enables an optimization (based on the minimal mean square error criterion) to a desired OTF. By combining several OTF design goal requirements, each represents a different plane along the beam propagation direction, an imaging system with an increased depth of focus is obtained. Because a phase only filter is used, high energetic efficiency is achieved.     

Design and evaluation of a THz time domain imaging system using standard optical design software

A terahertz (THz) time domain imaging system is analyzed and optimized with standard optical design software (ZEMAX). Special requirements to the illumination optics and imaging optics are presented. In the optimized system, off-axis parabolic mirrors and lenses are combined. The system has a numerical aperture of 0.4 and is diffraction limited for field points up to 4 mm and wavelengths down to 750 microm. ZEONEX is used as the lens material. Higher aspherical coefficients are used for correction of spherical aberration and reduction of lens thickness. The lenses were manufactured by ultraprecision machining. For optimization of the system, ray tracing and wave-optical methods were combined. We show how the ZEMAX Gaussian beam analysis tool can be used to evaluate illumination optics. The resolution of the THz system was tested with a wire and a slit target, line gratings of different period, and a Siemens star. The behavior of the temporal line spread function can be modeled with the polychromatic coherent line spread function feature in ZEMAX. The spectral and temporal resolutions of the line gratings are compared with the respective modulation transfer function of ZEMAX. For maximum resolution, the system has to be diffraction limited down to the smallest wavelength of the spectrum of the THz pulse. Then, the resolution on time domain analysis of the pulse maximum can be estimated with the spectral resolution of the center of gravity wavelength. The system resolution near the optical axis on time domain analysis of the pulse maximum is 1 line pair/mm with an intensity contrast of 0.22. The Siemens star is used for estimation of the resolution of the whole system. An eight channel electro-optic sampling system was used for detection. The resolution on time domain analysis of the pulse maximum of all eight channels could be determined with the Siemens star to be 0.7 line pairs/mm.     

Optical design of a dynamic focus catheter for high-resolution endoscopic optical coherence tomography

The optical system design of a dynamic focus endoscopic probe for optical coherence tomography is reported. The dynamic focus capability is based on a liquid lens technology that provides variable focus by changing its curvatures in response to an electric field variation. The effects of a cylindrical exit window present, in practice, for a catheter were accounted for. Degradation in image quality caused by this window was corrected to get diffraction limited imaging performance. As a result, the dynamically focusing catheter with a lateral resolution ranging from 4 to 6 mum through an approximately 5 mm imaging distance was designed without mechanically refocusing the system.     

光学四象限分光器参数的优化设计

以几何光学的矩阵变换为基础，通过光线追迹的方法，对四象限分光的多透镜成像复杂光学系统进行仿真建模。由所得到的基本参数的关系曲线，优化确定系统的放大镜放大系数为20，分光镜离轴距离为3mm，系统出瞳直径1mm。对复杂光学系统参数的优化提供了新的思路和方法。     

Reconfigurable imaging systems using elliptical nanowires

Materials that have subwavelength structure can add degrees of freedom to optical system design that are not possible with bulk materials. We demonstrate two lenses that are composed out of lithographically patterned arrays of elliptical cross-section silicon nanowires, which can dynamically reconfigure their imaging properties in response to the polarization of the illumination. In each element, two different focusing functions are polarization encoded into a single lens. The first nanowire lens has a different focal length for each linear polarization state, thereby realizing the front end of a nonmechanical zoom imaging system. The second nanowire lens has a different optical axis for each linear polarization state, demonstrating stereoscopic image capture from a single physical aperture.     

Optical design of the wide angle camera for the Rosetta mission

The final optical design of the Wide Angle Camera for the Rosetta mission to the P/Wirtanen comet is described. This camera is an F/5.6 telescope with a rather large 12 degrees x 12 degrees field of view. To satisfy the scientific requirements for spatial resolution, contrast capability, and spectral coverage, a two-mirror, off-axis, and unobstructed optical design, believed to be novel, has been adopted. This configuration has been simulated with a ray-tracing code, showing that theoretically more than 80% of the collimated beam energy falls within a single pixel (20" x 20") over the whole camera field of view and that the possible contrast ratio is smaller than 1/1000. Moreover, this novel optical design is rather simple from a mechanical point of view and is compact and relatively easy to align. All these characteristics make this type of camera rather flexible and also suitable for other space missions with similar performance requirements.     

In-line holographic particle image velocimetry for turbulent flows

A holographic system has been developed to measure the velocity field in three-dimensional flow regions. The system records the position of small tracer particles on two in-line holograms of the flow obtained simultaneously. Two exposures are recorded on each hologram. The flow velocity is derived from the displacement of the particles between exposures. A general design procedure is described for selecting the particle diameter and the concentration on the basis of the configuration of the flow facility and the resolution characteristics of the holographic imaging system. The system was implemented in a 2 ft x 2 ft (1 ft = 30.48 cm) water channel to measure the velocity field in a turbulent free-surface jet. The spatial resolution of the system is 1 mm, and the field of view is 100 mm, approximately. Measurements performed with this system are compared with results reported in the literature and are found to be in good agreement.     

声子晶体平板组合成像特性分析

用多重散射方法分析了声子晶体单平板和多平板的成像特性。发现：在特定频率范围内,引入等效负折射率后,单板负折射成像可用反Snell定律描述;多层声子晶体平板成像服从依次成像规律,可类比传统几何光学中共轴球面系统的成像,引入实物实像、虚物虚像等概念;平板透镜不改变出射波的出射方向,仅使出射位置产生平移;多平板透镜的累加成像与等厚度的单一平板透镜成像具有相同的效果。平板透镜的这些成像特点,使其在成像质量、加工方法、系统组合等方面比球面透镜更具优势。     

Safety analysis of autonomous excavator functionality

This paper presents an account of carrying out a hazard analysis to define the safety requirements for an autonomous robotic excavator. The work is also relevant to the growing generic class of heavy automated mobile machinery. An overview of the excavator design is provided and the concept of a safety manager is introduced. The safety manager is an autonomous module responsible for all aspects of system operational safety, and is central to the control system's architecture. Each stage of the hazard analysis is described, i.e. system model creation, hazard definition and hazard analysis. Analysis at an early stage of the design process, and on a system that interfaces directly to an unstructured environment, exposes certain issues relevant to the application of current hazard analysis methods. The approach taken in the analysis is described. Finally, it is explained how the results of the hazard analysis have influenced system design, in particular, safety manager specifications. Conclusions are then drawn about the applicability of hazard analysis of requirements in general, and suggestions are made as to how the approach can be taken further     

一次成像折反射式步进变焦距物镜

设计了一个用于远距离监视电视的折反射式步进变焦距透镜。为使微光、白光和近红外三个波段共用一个光学系统,提出一次成像折反射式变焦,并进行了理论分析和给出了设计实例。克服了二次成像折反射式步进变焦方式二级光谱不能校正的缺陷,并且杜绝了像面中心产生黑斑的可能,结构也比较简单。     

眼球系统中关键屈光元件的光学模型研究

角膜和晶状体是人眼光学系统中两个关键的屈光元件,为了理解眼内各介质和整个眼球的屈光状态以及视网膜上的成像,有利于眼科临床方面的应用,需要分别对二者进行光学特性模型的分析与研究。根据角膜和晶状体的光学特性,应用光学设计软件Zemax和有关的数学工具,从光学成像角度,分别对角膜和晶状体模型进行研究:基于结合人眼光学模型的角膜双二次曲面模型的建立方法,统计分析了我国人眼实测角膜参数的数据;通过对晶状体折射率分布特点的分析,分别在轴向和径向上进行了综合分析。最后给出了符合我国人眼特点的角膜面型的统计数值,完善了我国人眼角膜光学模型的建立;获得了形式简单且能够表示晶状体折射率分布一般特征的梯度渐变模型表达式。基于收集的我国人眼实测数据的角膜面型模型和晶状体梯度渐变形式的折射率模型,为解决人眼光学系统研究中的关键问题提供了新的方案和思路。     

Single-cell analysis by a scanning thermal lens microscope with a microchip: direct monitoring of cytochrome c distribution during apoptosis process

We developed a microsystem for cell experiments consisting of a scanning thermal lens microscope detection system and a cell culture microchip. The microchip system was good for liquid control in microspace, and this results in secure cell stimulation and coincident in vivo observation of the cell responses. The system could detect nonfluorescent biological substances with extremely high sensitivity without any labeling materials and had a high spatial resolution of approximately 1 microm. This system was applied to monitoring of cytochrome c distribution in a neuroblastoma-glioma hybrid cell cultured in the microflask (1 mm x 10 mm x 0.1 mm; 1 microL) fabricated in a glass microchip. Cytochrome c release from mitochondria to cytosol during the apoptosis process was successfully monitored with this system. The cytochrome c detected with this system was estimated to be approximately 10 zmol. We concluded that the system was suitable for measuring the distribution of chemical substances in a single cell because the microchip is good for liquid handling in microspace and the thermal lens microscope has high sensitivity and spatial resolution.     

基于一新型数码照相机照相物镜的研制

介绍一种新型数码照相机照相物镜的研制过程。其光学系统总长≤55mm,焦距59．9mm,相对孔径1/4．8。此物镜结构简单,后工作距离大。检测证明该物镜成像质量符合设计要求。