Preparation and characterization of nano-rare earth composite materials: application in selectivity catalytic oxidation of ammonia and its cytotoxicity study

The manufacture, physical characterization, environmental applications and cytotoxicity properties of nanocomposites consisting of CuO/CeO₂ nano-rare earth composite materials prepared using the coprecipitation method at molar ratio of 6:4 with aqueous solutions of copper nitrate and cerium nitrate were reported. The performance of the selective catalytic oxidation of ammonia to N₂ (NH₃-SCO) over a CuO/CeO₂ nano-rare earth composite materials in a tubular fixed-bed reactor (TFBR) at temperatures from 423 to 673 K in the presence of oxygen was elucidated. The catalytic redox behavior was determined by cyclic voltammetry (CV). The nanocomposite particles were characterized by TEM, with a tiny particle size around 10 nm with high dispersion phenomena. Further, cell cytotoxicity and the percentage cell survival were determined by using 3-(4,5-dimethylthiazol-2-yl)-5(3-carboxymethoxyphenol)-2-(4-sulfophenyl)-2H-tetra-zolium (MTS) assay on human lung MRC-5 cell line. Experimental results showed that no apparent cytotoxicity was observed when the MRC-5 was exposed to the CuO/CeO₂ nanocomposite materials.     

Removal of ammonia from aqueous solutions by catalytic oxidation with co-per-based rare earth composite metal materials: catalytic performance, characterization, and cytotoxicity evaluation

Ammonia (NH3) has an important use in the chemical industry and is widely found in industrial wastewater. For this investigation of copper-based rare earth composite metal materials, aqueous solutions containing 400 mg/L of ammonia were oxidized in a batch-bed reac-tor with a catalyst prepared by the co-precipitation of copper nitrate, lanthanum nitrate and cerium nitrate. Barely any of the dissolved ammo-nia was removed by wet oxidation without a catalyst, but about 88% of the ammonia was reduced during we...     

Rare earth oxide modified Cu-Mn compounds supported on TiO₂ catalysts for low temperature selective catalytic oxidation of ammonia and in lean oxygen

Selective catalytic oxidation(SCO) of ammonia was carried out over Cu-Mn compounds catalysts modified with trivalent rare earth oxide Ce2O3 and La2O3 respectively.TiO2 was used as support and different ratio of O2 were tested in order to find an appropriate O2 concentration(vol.%),and the results showed that 1%O2(vol.%) was propitious to SCO of ammonia.The effects of the two rare earth oxides modified catalysts Ce2O3-Cu-Mn/TiO2 and La2O3-Cu-Mn/TiO2 on the catalytic activity and selectivity of ammonia oxidation were investigated under the reaction condition of 500 ppm ammonia,1%O2(vol.%),at the temperature from 125 to 250 oC.The results revealed the beneficial role of Ce2O3 and La2O3 in catalytic activity at low temperature and lean oxygen concentration,while the modification with Ce2O3 and La2O3 led to the negative influence on N2 selectivity.For the catalysts modified with Ce showed lower NO and N2O selectivity than the catalysts modified with La,then the effects of different Ce loadings on catalytic activity and selectivity were also considered,in combination with catalysts preparation methods,which include incipient wet impregnation,sol-gel method and co-precipitation.Results revealed that the catalysts prepared by sol-gel method obtained preferable catalytic activity compared with the others,reaching 99% ammonia at 200 oC,whereas 96% NO was detected.It also indicated that different catalyst preparation method significantly determined production distribution.     

Preparation of Au/CeO2 catalyst and its catalytic performance for HCHO oxidation

Aqueous precipitation and deposition-precipitation method were used to prepare CeO2 supports and Au/CeO2 catalysts, respectively. The effect of preparation condition of support on the catalyst activity was investigated. The catalytic combustion of HCHO was considered as the probe reaction for comparing the catalyst activity. The BET, X-ray diffraction, X-ray photoelectron spectroscopy （XPS）, and reduction （TPR） were carried out to analyze the influence factor on the catalysts activity. The results showed that the addition of dispersant and use of microwave in the support preparation procedure could be beneficial for enhancing the interaction of supports and gold species and thus improved the catalytic activity. The total conversion temperature for HCHO was 146 ℃ over AC400. With the modification during supports preparation process, the catalytic activity increased with total conversion temperature decreasing to 98 ℃. The results of XPS indicated that Au^0 and Au^＋1 species coexisted in these catalysts and the activity of catalyst correlated with Au^＋1/Au^0 ratio. Temperature-programmed reduction results demonstrated that the reduction peak appeared between 100-170 ℃ with the inducing of gold. The dependence of activity on the reduction peak temperature implied that ionic gold was catalytic activity component for HCHO oxidation.     

Preparation, Characterization of CuO／CeO2 and Cu／CeO2 Catalysts and Their Applications in Low-Temperature CO Oxidation

CeO2 was synthesized via sol-gel process and used as supporter to prepare CuO/CeO2, Cu/CeO2 catalysts by impregnation method. The catalytic properties and characterization of CeO2, CuO/CeO2 and Cu/CeO2 catalysts were examined by means of a microreactor-GC system, HRTEM, XRD, TPR and XPS techniques. The results show that CuO has not catalytic activity and the activity of CeO2 is quite low for CO oxidation. However, the catalytic activity of CuO/CeO2 and Cu/CeO2 catalysts increases significantly. Furthermore, the activity of CuO/CeO2 is higher than that of Cu/CeO2 catalysts.     

Preparation and characterization of Ce1-xFexO2 complex oxides and its catalytic activity for methane selective oxidation

A series of Ce1-xFexO2 （x=0, 0.2, 0.4, 0.6, 0.8, 1） complex oxide catalysts were prepared using the coprecipitation method. The catalysts were characterized by means of XRD and H2-TPR. The reactions between methane and lattice oxygen from the complex oxides were investigated. The characteristic results revealed that the combination of Ce and Fe oxide in the catalysts could lower the temperature necessary to reduce the cerium oxide. The catalytic activity for selective CH4 oxidation was strongly influenced by dropped Fe species. Adding the appropriate amount of Fe2O3 to CeO2 could promote the action between CH4 and CeO2. Dispersed Fe2O3 first returned to the original state and would then virtually form the Fe species on the catalyst, which could be considered as the active site for selective CH4 oxidation. The appearance of carbon formation was significant and the oxidation of carbon appeared to be the rate-determining step; the amounts of surface reducible oxygen species in CeO2 were also relevant to the activity. Among all the catalysts, Ce0.6Fe0.402 exhibited the best activity, which converted 94.52% of CH4 at 900 ℃.     

Synthesis of lathanum or La-B doped KIT-6 mesoporous materials and their application in the catalytic oxidation of styrene

La-doped and La-B-doped KIT-6 mesoporous materials were prepared by direct hydrothermal synthesis with pH-adjusting method and characterized by X-ray diffractometer(XRD),nitrogen sorption,FT-IR,UV-Vis,X-ray photoelectron spectroscopy(XPS) and ICP-AES.The catalytic performance for the oxidation of styrene by hydrogen peroxide,tert-butyl hydroperoxide or oxygen was investigated.The results showed that the introduction of heteroatoms did not destroy the mesostructure of KIT-6 with cubic Ia3d space group.La or ...     

Rare earth element content in the SPM of Daliao river system and its comparison with that in the sediments, loess and soils in China

Content and distribution patterns of rare earth dements （REEs） in the suspended particulate material （SPM） of Daliao River system were investigated and compared with those in the fiver and sea sediments, loess, and soils of China. Twenty-seven samples of SPM were taken in Daliao River system and digested with various acids followed by ICP-MS analysis for REEs and ICP-OES analysis for Al, Fe, Mn, Ti, Mg, Ca, Na, and K, to measure the total concentrations of these elements. Results indicated that the spatial change in the content of REEs was great, with the coefficient of variance （CV） from 84% to 105%, while the contents of REEs were significantly correlated with each other. Chondrite-normalized patterns of REEs were characterized by higher enrichment of light REEs than heavy REEs, and a depletion of Eu in the SPM was generally found. The positive anomaly of Eu in the SPM of Xi River was due to anthropogenic source in Shenyang City. Furthermore, chondfite- and upper continent crust-normalized patterns of REEs in the SPM of Daliao River system, sediments of Yangtze River and Yellow River, sediments of Yellow Sea, East Sea, South Sea of China, and loess and soil of China, were very similar to one another. These demonstrated that the weathering and sedimentary processes resulted in constant REE distribution not only in the typical sedimentary rocks, but also in the modem riverine particle, sea sediments, loess, and soils.     

Preparation and characterization of Ce_1-xNi_xO₂ as oxygen carrier for selective oxidation methane to syngas in absence of gaseous oxygen

A citric acid complex method was employed to prepare Ce/Ni mixed oxides with various Ce/Ni ratios useful for selective oxidation methane to syngas in the absence of gaseous oxygen,and the catalytic activity measurement was investigated in a fixed bed reactor at 800 oC.The prepared oxygen carriers were characterized by various characterization techniques such as TG-DSC,XRD and TPR.The results of TG-DSC indicated that the Ce1-xNixO2 precursor generated a stable phase after the heat-treatment at temperatures above 800 oC.The XRD characterization suggested that some Ce-Ni solid solution was formed when Ni2+ ions was incorporated into the lattice of CeO2,and it led to the generation of O-vacancy which could improve the oxygen mobility in the lattice of oxygen carriers.It was found that Ce0.8Ni0.2O2 gave the highest activity in the selective oxidation methane to syngas reaction,and the average methane conversion,CO and H2 selectivity reached to 82.31%,82.41% and 87.64%,respectively.The reason could be not only attributed to the fitting amount of NiO dispersed on the CeO2 surface and bulk but also to actual lattice oxygen amount increased in oxygen carrier.     

Preparation and electrochemical properties of Y-doped Li3V2（PO4）3 cathode materials for lithium batteries

Y-doped Li3V2(PO4)3 cathode materials were prepared by a carbothermal reduction(CTR) process. The properties of the Y-doped Li3V2(PO4)3 were investigated by X-ray diffraction (XRD) and electrochemical measurements. XRD studies showed that the Y-doped Li3V2(PO4)3 had the same monoclinic structure as the undoped Li3V2(PO4)3. The Y-doped Li3V2(PO4)3 samples were investigated on the Li extraction/insertion performances through charge/discharge, cyclic voltammogram (CV), and electrochemical impedance spectra (EIS). The optimal doping content of Y was x=0.03 in Li3V2-xYx(PO4)3 system. The Y-doped Li3V2(PO4)3 samples showed a better cyclic ability. The electrode reaction reversibility was enhanced, and the charge transfer resistance was decreased through the Y-doping. The improved electrochemical performances of the Y-doped Li3V2(PO4)3 cathode materials were attributed to the addition of Y3+ ion by stabilizing the monoclinic structure.