Photoluminescence study of SiO2 coated Eu3+:Y2O3 core-shells under high pressure

Uniform core-shell Eu³⁺:Y₂O₃/SiO₂ spheres were synthesized via precipitation and the Stöber method. The structural transition of core-shell Eu³⁺:Y₂O₃/SiO₂ was studied by using high pressure photoluminescence spectra. With pressure increasing, the emission intensities of ⁵D₀→⁷F_0,1,2 transitions of Eu³⁺ ions decreased and the transition lines showed a red shift. The relative luminescence intensity ratio of ⁵D₀→⁷F₂ to ⁵D₀→⁷F₁ transitions decreased with increasing pressure, indicating lowering asymmetry around Eu³⁺ ions. During compression, structural transformation for cores in the present core-shell Eu³⁺:Y₂O₃/SiO₂ sample from cubic to monoclinic took place at 7.5 GPa, and then the monoclinic structure turned into hexagonal above 15.2 GPa. After the pressure was released, the hexagonal structure transformed back to monoclinic and the monoclinic structure was kept stable to ambient pressure.     

Pressure effect on optical properties and structure stability of LaPO₄:Eu³⁺ hollow spheres

Uniform monoclinic monazite structure LaPO4:Eu3+ hollow spheres were s ynthesized via an attractive hydrothermal method owing to the higher yield and s implicity.Photoluminescence and Raman spectra of the sample were investigated u nder high pressure up to 26 GPa using diamond anvil cells.At ambient pressure,the sample exhibited same luminescent properties with that of bulk monazite LaPO 4:Eu3+.With the increase of pressure,the emission intensity of Eu3+ decreased and the half-widths of transition lines increased,while emission peaks showed a red shift toward longer wavelengths due to increase in crystal-field strength.No phase transformation appeared before amorphization for monoclinic LaPO4:Eu3+ hollow spheres,which was confirmed based on the analysis of high pressure Raman spectra.The large surface energy of hollow spheres was proposed to prevent the occurrence of phase transformation.     

Re-determination of the crystal structure of Ca₂Y₈Si₆O₂₆ and study on the luminescent properties of Ca₂Y₈Si₆O₂₆:Tb³⁺

The crystal structure of silicate oxyapatite Ca2Y8Si6O26 was indexed as hexagonal,space group P63/m,a=0.93515 nm,c=0.67872 nm,α=β=90°,γ=120°,V=0.5138692 nm3.Three strong peaks located at 32.079o,32.595o,and 50.104o with d=2.7903,2.74649,1.8194 was in accordance with,(112),and(213) planes.The optimum concentration of Tb3+ in Ca2Y8Si6O26 to yield highest photoluminescence intensity was 10 mol.% of Y3+.The corresponding excitation spectrum consisted of an intense broad band from 220 to 260 nm.The photoluminescence measurements showed that the green emission originated from 5D4-7F5 was predominant in the measured range with strong doublet lines at 543 and 549 nm.     

白光LED用LaPO4:Eu3+红色荧光粉的合成与表征

利用水热法制备了性能稳定的红色荧光粉LaPO4:Eu3+,同时研究了不同的Eu3+浓度、煅烧温度对荧光粉发光性能的影响.通过X射线粉末衍射(XRD)和扫描电子显微镜(SEM)来表征荧光粉的晶体结构和颗粒大小及形貌;用激发光谱和发射光谱以及荧光衰减曲线来表征荧光粉的荧光性能.结果表明:未煅烧时前躯体主要是六方晶相LaPO4·0.5H2O,煅烧温度在900℃时,所制备样品为单斜相LaPO4:Eu3+;SEM图像显示5 at.%Eu3+掺杂LaPO4呈椭球形,颗粒长约为500 nm,宽约为300 nm.最大发射波长和激发波长分别为592 nm和393 nm,发射光谱中592 nm和612 nm的发射峰对应的是Eu3+离子的5D0→7F1和5D0→7F2跃迁.其荧光寿命为3.32 ms.     

Hydrothermal synthesis,structure study and luminescent properties of YbPO₄:Tb³⁺ nanoparticles

YbPO4:Tb3+ were synthesized by mild hydrothermal method.The luminescent properties,morphologies and structure of the obtained powders were characterized by photoluminescence(PL) spectra,FESEM,X-ray diffractometer(XRD) and FTIR.The results showed that the prepared YbPO4:Tb3+ nanoparticles were pure tetragonal phase and the average grain size varied with increasing of Tb3+ concentration.Hydrothermal temperature was revealed to be the key factor to enhance the emission intensity of YbPO4:Tb3+ phosphors.The spherical nanoparticles could be effectively excited by near UV(369 nm) light and exhibited green performance at 543 nm(5D4→7F5),489 nm(5D4→7F6) and 586 nm(5D4→7F4).The CIE chromaticity was calculated to be x=0.298,y=0.560.The YbPO4:Tb3+ nanoparticles exhibited potential to act as UV absorber for solar cells to enhance the conversion efficiency.     

Intense blue-emitting Ca₂PO₄Cl:Eu²⁺ phosphor for near-ultraviolet converting white light-emitting diodes

A blue phosphor Ca2PO4Cl:Eu2+(CAP:Eu2+) was synthesized by solid state reaction.The Ca2PO4Cl:Eu2+ exhibited high quantum efficiency and excellent thermal stability.The luminescent intensity of Ca2PO4Cl:Eu2+ was found to be 128% under excitation at 380 nm,149% under 400 nm,and 247% under 420 nm as high as that of BaMgAl10O17:Eu2+.The optimal doping concentration was observed to 11 mol.% of CAP:Eu2+.The energy transfer between Eu2+ ions in CAP were occurred via electric multipolar interaction,and the critical transfer distance was estimated to be 1.26 nm.A mixture of blue-emitting Ca2PO4Cl:Eu2+,green-emitting(Ba,Sr)2SiO4:Eu2+ and red-emitting CaAlSiN3:Eu2+ phosphors were selected in conjunction with 400 nm chip to fabricate white LED devices.The average color-rendering index Ra and correlated color temperature(Tc) of the white LEDs were found to be 93.4 and 4590 K,respectively.The results indicated that it was a promising candidate as a blue-emitting phosphor for the near-UV white light-emitting diodes.     

Electrospinning synthesis and luminescent properties of Lu₂O₃:Eu³⁺ nanofibers

One-dimensional Lu2O3:Eu3+ nanofibers were prepared by electrospinning followed by high-temperature calcinations.Thermogravimetric and differential thermal analysis,X-ray powder diffraction,Fourier transform infrared spectroscopy,scanning electron microscopy,photoluminescent spectra and decay curves were used to characterize the samples.Results showed that samples began to crystallize at ～500 oC and crystallized completely around 1000 oC.The average diameter of nanofibers(1000 oC annealed) was about 55 nm and the particle size of Lu2O3:Eu3+ increased with increasing annealing temperature.Under ultraviolet excitation,nanofibers exhibited typical red emission of Eu3+ in Lu2O3.The effect of heat-treatment temperature on luminescent properties of nanofibers was also discussed.     

Controlled synthesis and tunable luminescence of NaYF₄:Eu³⁺

High quality NaYF4:Eu3+ luminescent materials were successfully synthesized via a facile template technique by hydrothermal method.The samples were characterized by X-ray powder diffraction(XRD),transmission electron microscopy(TEM) and fluorescence spectroscopy(FS).The incorporating of Eu3+ ions into NaYF4 crystal lattice influenced the symmetry types of NaYF4 crystals,resulting in phase transformation of NaYF4 crystals between α and β phase.The pure hexagonal phase of branched NaYF4:Eu3+ was obtained as the Eu3+ concentration reached 15 mol.%.In addition,the luminescence color was tuned by changing the doping concentration of Eu3+ ions.     

Properties of red-emitting phosphors Sr2MgSi2O7:Eu3+ prepared by gel-combustion method assisted by microwave

Novel red-emitting phosphors Sr2MgSi2O7:Eu3+ were prepared by gel-combustion method assisted by microwave. The phase struc-ture and luminescent properties of as-synthesized phosphors were investigated by XRD and fluorescence spectrophotometer, respectively. The results showed that the as-synthesized sample was Sr2MgSi2O7 with tetragonal crystal structure. The excitation spectrum of Sr2MgSi2O7:Eu3+ was composed of two major parts: one was the broad band between 200 and 350 nm, which belonged to the charge transfer of Eu3+-O2-; the other consisted of a series of sharp lines between 350 and 450 nm, ascribed to the f-f transition of Eu3+. The emission spec-trum consisted of two emission peaks at 593 and 616 nm, which was attributed to 5D0→7F1 and 5D0→7F2 of Eu3+, respectively. The concen-tration of Eu3+ (x) had great effect on the emission intensity of Sr2-xMgSi2O7:Eu3+x. When x varied in the range of 0.04-0.18, the intensity of emission peaks at 593 and 616 nm increased gradually with the concentration of Eu3+ increasing. It was interesting that no concentration quenching occurred. Moreover, the luminescent intensity could be greatly enhanced with incorporation of charge compensator Li+ ions.     

Luminescent properties of Eu³⁺-doped BaZrO₃ phosphor for UV white light emitting diode

A novel orange phosphor Eu3+ doped barium zirconate(BaZrO3) was synthesized by conventional solid state reaction method and its crystal structure and luminescent properties were investigated in this paper.The X-ray diffraction patterns(XRD) showed that simple BaZrO3 phase was obtained.Monitoring at 596 nm,the excitation spectrum consisted of a broad band and a series of narrow bands and the stronger excitation peaks located at 275 and 393 nm,respectively.The emission spectrum excited by 393 nm UV light was composed of four narrow bands.The strongest emission was located at 596 nm.The appropriate concentration of Eu3+ was 0.025(molar fraction) for the highest emission intensity at 596 nm.The H3BO3 and ammonium were added as flux and the results showed that 2 wt.% NH4F ions was the optimal flux for BaZrO3:Eu3+.     

Study on Spectra of La2CaB10O19∶Eu3+ in VUV-VIS Range

Excitation and emission spectra of new borate La2CaB10O19 doped Eu3 in VUV-VIS range, high resolution emission spectra at room temperature and lifetime of Eu3 were investigated. The emission line at about 616 nm attributed to the 5D0-7F2 transition of Eu3 is the most intense emission of Eu3 . The broad band at about 244 nm is originated from charge transition band (CTB) of O2-→Eu3 . According to the numbers of spectral lines 5D0-7F0 and 5D0-7F1 in high-resolution spectrum, Eu3 ions occupy two crystallographic sites. The lifetimes of 5D0-7F0 transition of Eu3 of two kinds of lattice sites are individually 2.1 and 2.6 ms, and both are exponential decay. In the VUV excitation spectrum, complicated band between 130 and 170 nm consists of host absorption and f-d transition of Eu3 .     

Effects of aluminum co-doping on photoluminescence properties of Ce³⁺-doped SiO₂ glasses

SiO2 glasses co-doped with Al3+ ions were prepared by a sol-gel method by holding 0.5% of Ce3+ ions constant and varying the Al3+ ions concentrations.Thermal stability,the structural,chemical and the optical properties of the samples were studied by using differential scanning calorimetric(DSC),thermo gravimetric analysis(TGA),X-ray diffraction(XRD),scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),UV-vis spectroscopy and photoluminescence spectroscopy(PL).The DSC and TGA of samples depicted that the presence of dopant and co-dopant decreased the endothermic peak temperature and the yield respectively.SEM images showed that the particles were in the nano-range and spherical in shape.The XRD showed that all the samples were amorphous.The UV absorption measurements indicated that the presence of Al3+ ions significantly reduced the SiO2 absorption band,increased the absorbance intensity of SiO2 and decreased the transmittance as compared to the presence of the Ce3+ ions alone.The photoluminescence results displayed an optimum increase in luminescence intensity when the ratio of Al:Ce was 10:1 and further increase in aluminum content quenched the luminous intensity.     

Synthesis and characterization of CaAl_xO_y:Eu²⁺ phosphors prepared using solution-combustion method

Europium-doped calcium aluminate(CaAlxOy:Eu2+) phosphors were obtained at low temperatures(500 oC) by the solution-combustion of corresponding metal nitrate-urea solution mixtures.The particle size and morphology and the structural and luminescent properties of the as-synthesized phosphors were examined by means of scanning electron microscopy(SEM),X-ray diffraction(XRD),Auger spectroscopy,transmission electron spectroscopy(TEM) and photoluminescence(PL).It was found that the Ca:Al molar ratios showed greatly influence not only on the particle size and morphology,but also on their PL spectra and structure.With the Ca:Al molar ratios increasing from 6:100 to 26:100,the structure of as-synthesized phosphor changed from CaAl12O19 to monoclinic CaAl2O4 and the dominant emitting light from red to blue,implying that the oxidation state of doped europium ions changed from trivalent to divalent due to the structure variation of host lattice.A blue phosphor with almost pure phase can be easily prepared by solution combustion method with suitable Ca:Al molar ratio.     

Cooperative energy transfer in Eu3+,Yb3+ codoped Y2O3 phosphor

Under 980 nm laser excitation,red emission(5D0-7FJ(J=0,1,2)) of Eu3+ was observed in cubic Y2O3 codoped with Eu3+ and Yb3+.The dependence of the upconverted emission on doping concentration and laser power was studied.Yb3+ emission around 1000 nm(2F5/2-2F7/2) was reported upon excitation of Eu3+ ions.The decay curves of 5DJ(J=0,2) emission of Eu3+ under excitation of 266 nm pulse laser were examined to investigate the Eu3+→Yb3+ energy transfer process.Cooperative energy transfer process was discussed as the possible mechanism for the visible up-conversion luminescence of Eu3+ and near-infrared down-conversion emission of Yb3+.     

Optimization of BaMgAl₁₀O₁₇:Eu²⁺ phosphors by the substitution of Si-N bonds for Al-O bonds

We proposed a simple method to improve the thermal stability of BaMgAl10O17:Eu2+(BAM) phosphors by the substitution of Si-N bonds for Al-O bonds in the host lattice.Both photoluminescence properties and thermal stability under ultraviolet(UV) and vacuum ultraviolet(VUV) excitation could be significantly improved through Si-N incorporation.After thermal degradation at 600 °C for 1 h in air atmosphere,the Si-N doped sample(Ba0.88Eu0.12MgAl9.97Si0.03O16.97N0.03) had the highest emission intensity which was 22% and 40% stronger than that of as-received sample under UV and VUV excitation,respectively.This could be attributed to the stable local structure surrounding the Eu2+ ions and the lower electronegativity of nitrogen.     

Effects of Sr²⁺ on structure and luminescent properties of BaAl₁₂O₁₉:Eu phosphors

Ba0.9-ySryAl12O19:Eu0.1 phosphors were prepared by sol-gel technique,the crystalline structures of samples characterized by XRD,and the luminescence properties were investigated.The influence of crystallographic positions on the luminescent properties of Sr2+-doped BaAl12O19:Eu was investigated in detail.The results indicated that the crystal lattice of BaAl12O19:Eu was not influenced by the Sr2+ and doping Sr2+ in BaAl12O19:Eu enhanced the luminescent properties of the phosphors at the proper concentration of Sr2+.With the increasing of concentration of Sr2+ doped in BaAl12O19:Eu,the relative luminescent intensity of Ba0.9-ySryAl12O19:Eu0.1 strengthened and blue-shifted.     

Luminescent properties of Ca2SiO4:Eu3+ red phosphor for trichromatic white light emitting diodes

The luminescent properties of Eu3 doped Ca2SiO4 red phosphors synthesized by the flux fusion reaction method were investigated. It was found that the excitation spectrum included two regions: the weak excitation band below 325 nm and strong narrow peaks above 325 nm. The main peak of the excitation band was located at 400 nm. The peaks located at 290 nm were assigned to the combination of the charge transfer transition of O-Eu, peaks above 325 nm (325, 385, 400, 470, 511, and 539 nm) were assigned to the f–f transitions of Eu3 . The emission spectrum was dominated by the red peak located at 612 nm due to the electric dipole transition of 5D0–7F2. In addition, the ef- fects of the Eu3 content and charge compensators of Li , Na , K , and Cl– ions on the emission intensity were investigated. The experiment results suggested that the strongest emission was obtained when the concentration of the Eu3 ions was 0.3 mol–1, and Li ions gave the best improvement to enhance the emission intensity. Ca2SiO4:Eu3 , Li was thus suitable for low-cost trichromatic white light emitting diodes (WLED) based on UV InGaN chip.     

Co-Precipitation Synthesis and Spectral Characteristics of Long Afterglow Phosphor Y2O2 S： Sm^3＋, Mg^2＋ , Ti^4＋

Y2O2S：Sm^3＋, Mg^2＋, Ti^4＋ phosphor was synthesized by co-precipitation method. The crystalline structure of all synthesized phosphors was investigated by XRD. The result showed that all synthesized phosphors had a hexagonal crystal structure, which was the same as Y2O2S. The emission spectrum and excitation spectrum were measured, and the effect of Sm^3 ＋ molar ratio on the spectra was discussed. The emission spectra of the phosphors showed three emission peaks due to typical transitions of Sm^3 ＋ （4G5/2→6HJ ,J = 5/2, 7/2, 9/2）, and the emission peaks at 606 nm was stronger than others. With the increase of Sm^3 ＋ molar ratio, the emission intensity was strengthened. The excitation peaks were ascribed to the representative energy transition 4f→4f of Ti^4＋ phosphor prepared by co-precipitation method was Sm^3＋ ions. The results indicated that the Y2O2S ： Sm^3＋ , Mg^2＋ , an efficient long afterglow phosphor.     

Facile synthesis of visible light excited La_1-xGd_xF₃:Eu³⁺ micro-meter sphere using polyvinylpyrrolidone as a template

Lanthanide fluorides exhibited unique luminescent properties in terms of their low phonon energy can restrict the luminescence quenching and extend luminescent lifetimes.Here,a room-temperature co-precipitation method was used to synthesize europium(III) activated La1-xGdxF3 solid phosphors.X-ray diffraction(XRD) data confirmed the crystalline phases of synthesized sample belongs to orthorhombic system.All the as-derived materials exhibited red luminescence(5D0→7F1) under the excitation at longer wavelengths(394 and 466 nm).The powder with the most intense emission was achieved in terms of 10 mol.% doping concentration(Eu content,La/Gd=1/9) and sample sintered at 700 oC.Scanning electron microscopy(SEM) investigated the morphology and crystalline of the samples,showing that many regular and large balls(5-10 μmol/L) were dispersed within the micro-meter scale composites.We proved that the above crystal growth structures were controllable and predicable based on the surface functionalization by polyvinylpyrrolidone ligand.     

Luminescent Properties of Ca2 Y8 ( SiO4 ) 6O2:Eu3 + Phosphors Prepared by Spray Pyrolysis Process

Using CaCO3, metal oxides (all dissolved by nitric acid) and tetraethoxysilane Si (OC2H5 )4 (TEOS) as the main starting materials, Ca2Y8 (SiO4 )6O2: Eu3 phosphors were synthesized by spray pyrolysis.X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL) spectra as well as lifetimes were used to characterize the resulting phosphors.The results of XRD indicated that the 1000 ℃ annealed powders crystallize with the silicate oxyapatite structure.SEM study revealed that the phosphors consist of spherical particles with an average size of about 1 ～ 3 μm.In the crystalline Ca2 Y8 (SiO4)6O2: Eu3 phosphor, the Eu3 shows its characteristic emission corresponding to 5 D0 - 7 FJ ( J = 0, 1,2, 3, 4) transitions, with 5D0 - 7 F2 red emission (613 nm) as the most prominent group, agreeing well with the structure of the host material.