Anticancer Potency Studies of Coordination Driven Self‐Assembled Arene–Ru‐Based Metalla‐Bowls

New tetranuclear cationic metalla‐bowls 5 – 7 with the general formula [Ru₄(p‐cymene)₄(N∩N)₂(OO∩OO)₂]⁴⁺ (N∩N=2,6‐bis(N‐(4‐pyridyl carbamoyl)pyridine, OO∩OO=2,5‐dihydroxy‐1,4‐benzoquinonato ( 5 ), OO∩OO=5,8‐dioxydo‐1,4‐naphthaquinonato ( 6 ), OO∩OO=hoxonato ( 7 )) were prepared by the reaction of the respective dinuclear ruthenium complexes 2 – 4 with a bispyridine amide donor ligand 1 in methanol in the presence of AgO₃SCF₃.These new molecular metalla‐bowls were fully characterized by analytical techniques including elemental analysis as well as ¹H and ¹³C NMR and HR‐ESI‐MS spectroscopy. The structure of metalla‐bowl 6 was determined from X‐ray crystal diffraction data. A UV/visible study was also carried out for the entire suite of new complexes. As with recent studies of similar arene–Ru complexes, the inhibition of cell growth by metalla‐bowls was established against SK‐hep‐1 (liver cancer), AGS (gastric cancer), and HCT‐15 (colorectal cancer) human cancer cell lines. Inhibition of cell growth by 6 was found to be considerably stronger against all cancer cell lines than the anticancer drugs, doxorubicin and cisplatin. In particular, in colorectal cancer cells, expression of the cancer suppressor genes APC and p53 was increased following exposure to 6 .     

Polyion Complex Nanofibrous Structure Formed by Self‐Assembly of Chitosan and Poly(acrylic acid)

Summary: An ideal scaffold design has a nanofibrous structure that can replace the natural extracellular matrix (ECM) until host cells can repopulate and resynthesize a new natural matrix. In this study, chitosan (CS)‐poly(acrylic acid) (PAA) nanofibers with diameters that range from 50 to 150 nm are synthesized successfully by a modified dropping method. Exactly how various carboxylic acid solvents affect the formation of CS‐PAA nanofibrous complex is also discussed. The results show that using adipic acid as a solvent to dissolve CS, adjusting the final pH value of the CS solution to 3, and then dropping the CS solution into the PAA solution at a ratio of 3:1, cause a significant reaction of CS with PAA and the nanofibers are dispersed uniformly. After freeze‐drying, a 3‐D interconnected CS‐PAA nanofibrous scaffold with a fiber diameter that ranges from 50 to 200 nm can be obtained. The CS‐PAA nanofibrous matrix is of particular interest in tissue engineering for controlled drug release and tissue remodeling.

Nanofibrous structure via polyion complex formation between chitosan and poly(acrylic acid).     

Self‐assembled poly(styrene‐co‐N‐isopropylacrylamide) film induced by capillary force

The monodisperse poly(styrene‐co‐N‐isopropylacrylamide) (poly(St‐co‐NIPAAm)) particles prepared by emulsifier‐free emulsion polymerization with microwave irradiation were induced by capillary forces to self‐assemble, and formed the two‐dimensional films on the clean glassware wafer substrates. The morphologies of the two‐dimensional films were characterized by scanning electron microscopy (SEM) and atom force microscopy (AFM). The results showed that monodisperse poly(St‐co‐NIPAAm) particles could form ordered two‐dimensional films by capillary forces. With NIPAAm concentration increasing, there gradually appeared surface undulations or surface defective region on the two‐dimensional films. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3514–3519, 2006     

Self‐assembling metal coatings from phosphated and siloxane‐modified polyurethane dispersions: An analysis of the coating–air interface

Polyurethane dispersion coatings containing phosphate and siloxane chains were evaluated for their self‐assembling properties for a single‐coating system. Dynamic contact angles (DCAs) and X‐ray photoelectron spectroscopy (XPS) were used to study the coating–air interface. The siloxane chains were the predominant species on the surfaces of the coatings. The wetting properties of the coating–air interface were reversed when the coated panels were immersed in an ionic solution, and the decrease in hydrophobicity was linear with time. Results from XPS and DCA analyses were similar. The self‐assembling properties of the coatings could be useful in the development of hydrophobic coatings from hydrophilic polymers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 893–899, 2003     

Self‐assembled micelles prepared from poly(ɛ‐caprolactone)–poly(ethylene glycol) and poly(ɛ‐caprolactone/glycolide)–poly(ethylene glycol) block copolymers for sustained drug delivery

A series of poly(?‐caprolactone)–poly(ethylene glycol) (PCL‐PEG) and poly(?‐caprolactone/glycolide)–poly(ethylene glycol) [P(CL/GA)‐PEG] diblock copolymers were prepared by ring‐opening polymerization of ?‐caprolactone or a mixture of ?‐caprolactone and glycolide using monomethoxy PEG (mPEG) as macroinitiator and Sn(Oct)₂ as catalyst. The resulting copolymers were characterized using ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, and wide‐angle X‐ray diffraction. Copolymer micelles were prepared using the nanoprecipitation method. The morphology of the micelles was spherical or worm‐like as revealed by transmission electron microscopy, depending on the copolymer composition and the length of the hydrophobic block. Introduction of the glycolide component, even in small amounts (CL/GA = 10), disrupted the chain structure and led to the formation of spherical micelles. Interestingly, the micelle size decreased with the encapsulation of paclitaxel. Micelles prepared from mPEG5000‐derived copolymers exhibited better drug loading properties and slower drug release than those from mPEG2000‐derived copolymers. Drug release was faster for copolymers with shorter PCL blocks than for those with longer PCL chains. The introduction of glycolide moieties enhanced drug release, but the overall release rate did not exceed 10% in 30 days. In contrast, drug release was enhanced in acidic media. Therefore, these bioresorbable micelles and especially P(CL/GA)‐PEG micelles with excellent stability, high drug loading content, and prolonged drug release could be promising for applications as drug carriers. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45732.     

Self‐structured serrated edges of chemically oxidized poly(dimethylsiloxane) disks

Serrated structures on a micrometer scale were spontaneously formed along the edge of a poly(dimethylsiloxane) (PDMS) disk using the following procedure. First, a drop of PDMS prepolymer was placed on a glass slide, followed by vulcanization. Second, the obtained PDMS disk was soaked in a mixture of sulfuric acid and nitric acid to form a serrated structure. Consideration of the mechanism of the structure formation was based on the following results. (1) The acid oxidized the PDMS surface, which was then swollen with the acid mixture or water to form wrinkles. (2) The wrinkle wavelength depended on the thickness of the PDMS film. (3) The thickness of the PDMS disk varied near its edge because the meniscus of the drop of the PDMS prepolymer was retained after the vulcanization. These results suggest that the thickness gradient of the PDMS disk led to the spontaneous formation of a serrated edge structure. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40767.     

Self‐Assembled PMMA Porous Membranes Decorated with In Situ Synthesized ZnO Nanoparticles with UV‐Tunable Wettability

This study reports a simple approach to fabricate porous poly(methyl methacrylate) (PMMA) membranes homogeneously decorated with exposed zinc oxide (ZnO) nanoparticles (NPs). This fabrication method significantly overcomes the disadvantages of both conventional foaming processes and incorporation of inorganic NPs in polymeric matrices. In particular, the porous structure is simply self‐assembled by slowly evaporating a suitable solvent. The ZnO NPs are in situ formed by a thermally activated conversion of the zinc acetate precursor, previously embedded in the polymeric matrix. Scanning and transmission electron microscopy investigations show the formation of the desired self‐assembled highly porous structure and ZnO NPs with branched morphology, respectively. The wetting behavior of the membranes surface is studied as a function of the ZnO content and UV irradiation, exploiting the switchable wettability of ZnO. The obtained unexpected results are then tentatively rationalized taking into account the surface chemistry and the roughness that arises from both porous structure and the different NPs dimensions and content.     

Self‐assembly and drug delivery behaviors of thermo‐sensitive poly(t‐butyl acrylate)‐b‐poly(N‐isopropylacrylamide) micelles

Self‐assembly of thermo‐sensitive poly (t‐butyl acrylate)‐b‐poly(N‐isopropylacrylamide) (PtBA‐ b‐PNIPAM) micelles in aqueous medium and its applications in controlled release of hydrophobic drugs were described. PtBA‐b‐PNIPAM was synthesized by atom transfer radical polymerization and aggregated into thermo‐sensitive core‐shell micelles with regular spheres in water, which was confirmed by ¹H‐NMR, fluorescence spectroscopy, transmission electron microscopic (TEM), and UV–vis spectroscopic techniques. The critical micelle concentration of micelles decreased with the increase of the hydrophobic components. The anti‐inflammation drug naproxen (NAP) was loaded as the model drug into polymeric micelles, which showed a dramatic thermo‐sensitive fast/slow switching behavior around the lower critical solution temperature (LCST). When the temperature was enhanced above LCST, release of NAP from core‐shell micelles was accelerated ascribed to the temperature‐induced deformation of micelles. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Self‐Cleaning,Thermoresponsive P(NIPAAm‐co‐AMPS) Double Network Membranes for Implanted Glucose Biosensors

A self‐cleaning membrane that periodically rids itself of attached cells to maintain glucose diffusion could extend the lifetime of implanted glucose biosensors. Herein, we evaluate the functionality of thermoresponsive double network (DN) hydrogel membranes based on poly(N‐isopropylacrylamide) (PNIPAAm) and an electrostatic co‐monomer, 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS). DN hydrogels are comprised of a tightly crosslinked, ionized first network [P(NIPAAm‐co‐AMPS)] containing variable levels of AMPS (100:0–25:75 wt% ratio of NIPAAm:AMPS) and a loosely crosslinked, interpenetrating second network [PNIPAAm]. To meet the specific requirements of a subcutaneously implanted glucose biosensor, the volume phase transition temperature is tuned and essential properties, such as glucose diffusion kinetics, thermosensitivity, and cytocompatibility are evaluated. In addition, the self‐cleaning functionality is demonstrated through thermally driven cell detachment from the membranes in vitro.

     

Self‐assembly of poly(3‐hexyl thiophene)‐b‐poly(ethylene oxide) into cylindrical micelles in binary solvent mixtures

Asymmetric block copolymer based on regioregular poly(3‐hexyl thiophene) (P3HT) and poly(ethylene oxide) (PEO) was synthesized through Heck reactions. The addition of PEO block has no influence in the effective conjugation length of P3HT block and apparently provides colloidal stability for the formation of stable nanostructures. Introduction of poor solvent to good solvent containing P3HT‐b‐PEO will induce the crystallization‐driven assembly of the P3HT into cylindrical micelles with a P3HT core, owing to π–π stacking of the conjugated backbone of P3HT. The absorption spectra of the cylindrical micelles reveal a red shift as compared to the polymer in good solvent, indicating the extension of conjugation length with an improved π–π stacking of the polymer chains within the cylindrical micelles. Our results indicated that cylindrical micelles with varied diameter and length can be obtained when solvent properties were varied using several different binary solvent mixtures. More interestingly, we demonstrate that ultrasonic processing can fragment the cylindrical micelles only when the ratio of poor solvent increases. This provides a facile and effective way to fabricate cylindrical micelles for applications in the area of polymer solar cell as well as organic optoelectronics device. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41186.     

Counterion‐Switched Reversibly Hydrophilic and Hydrophobic TiO2‐Incorporated Layer‐By‐Layer Self‐Assembled Membrane for Nanofiltration

The manipulation of surface wettability has been regarded as an efficient strategy to improve the membrane performances. Herein, the counterion‐switched reversibly hydrophilic and hydrophobic surface of TiO₂‐loaded polyelectrolyte membrane are prepared by layer‐by‐layer assembly of poly(sodium 4‐styrene sulfonate) (PSS) and poly(diallydimethyl‐ammoniumchloride (PDDA) containing TiO₂@PDDA nanoparticles (NPs) on the hydrolyzed polyacrylonitrile (PAN) substrate membrane. The obtained polyelectrolyte multilayer (PEM) membranes [PEM‐TiO₂]_4.5⁺X^? (X^? = Cl^?, PFO^? [perfluorooctanoate] etc.) show different hydrophilicity and hydrophobicity with various counterions. The integration of TiO₂ NPs obviously improves the wettability and nanofiltration (NF) performance of PEM membrane for (non)aqueous system of dyes (crystal violet, eriochrome black T) with a high recyclability. The highly hydrophilic [PEM‐TiO₂]_4.5⁺Cl^? (water contact angle [WCA]: 13.2 ± 1.8°) and hydrophobic [PEM‐TiO₂]_4.5⁺PFO^? (WCA: 115.4 ± 2.3°) can be reversibly switched via counterion exchange between Cl^? and PFO^?, verifying the surface with a reversible hydrophilic–hydrophobic transformation. For such membranes, the morphology, wettability, and NF performance rely on the loading of TiO₂@PDDA NPs and surface counterion. Meanwhile, the motion and interaction of water or ethanol in the hydrophilic or hydrophobic membrane are revealed by low‐field nuclear magnetic resonance. This work provides a facile and rapid approach to fabricate smart and tunable wetting surface for potential utilization in (non)aqueous NF separation.     

Comparison of styrene reversible addition–fragmentation chain‐transfer polymerization in a miniemulsion system stabilized by ammonlysis poly(styrene‐alt‐maleic anhydride) and sodium dodecyl sulfate

In this study, we conducted the reversible addition–fragmentation chain‐transfer (RAFT) polymerization of styrene (St) in a miniemulsion system stabilized by two different stabilizers, ammonlysis poly(styrene‐alt‐maleic anhydride) (SMA) and sodium dodecyl sulfate (SDS), with identical reaction conditions. The main objective was to compare the polymerization kinetics, living character, latex stability, and particle morphology. The macro‐RAFT agent used in both systems was SMA, which was obtained by RAFT solution polymerization mediated by 1‐phenylethyl phenyldithioacetate. The experimental results show that the St RAFT miniemulsion polymerization stabilized by SDS exhibited a better living character than that stabilized by ammonlysis SMA. The final latices were very stable in two systems, but different stabilizers had an obvious effect on the polymerization kinetics, living character, and particle morphology. All of the particles obtained by RAFT miniemulsion polymerization stabilized by SDS were solid, but an obvious core–shell structure was observed in the miniemulsion system stabilized by ammonlysis SMA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Hybrid polyaniline–TiO2 nanocomposite Langmuir–Blodgett thin films: Self‐assembly and their characterization

Polyaniline (PANi)–titanium dioxide (TiO₂) nanocomposite materials were prepared by chemical polymerization of aniline doped with TiO₂ nanoparticles. Surface pressure–area (π‐A) isotherms of these nanocomposites show phase transformations in the monolayer during compression process. Multiple isotherms indicate that the monolayer of the nanocomposite material can retain its configuration during compression‐expansion cycles. Langmuir–Blodgett thin films of PANi–TiO₂ nanocomposite were deposited on the quartz and indium tin oxide coated conducting glass substrates. Fourier transfer infrared spectroscopy and UV–visible spectroscopy study indicates the presence of TiO₂ in PANi, whereas X‐ray Diffraction study confirmed the anatase phase of TiO₂ and particle size (～nm) of PANi–TiO₂. The morphology of Langmuir–Blodgett films of these nanocomposites was also characterized by atomic force microscopy. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41386.     

Synthesis and tunable thermoresponsive solution morphologies of 2,2‐bis‐methylolpropionic acid dendron–azobenzene–poly(N‐isopropyl acrylamide) copolymers

Amphiphilic temperature‐ and photoresponsive linear–dendritic block copolymers comprising second‐generation acetonide‐2,2‐bis‐methylolpropionic acid‐based polyester dendron and linear poly(N‐isopropyl acrylamide) (PNIPAM) linked by an azobenzene unit were synthesized using atom transfer radical polymerization (ATRP) followed by click chemistry. Linear PNIPAM precursor was prepared from an azide‐functionalized azobenzene containing ATRP initiator. Two polymers obtained by varying the chain length of the PNIPAM block showed different morphologies and lower critical solution temperature (LCST) values in aqueous solution. Complete change in morphology of the two polymers into large spherical aggregates and nanotubes, respectively, was observed upon heating the micellar solution above LCST. The azobenzene unit was found to undergo trans–cis photoisomerization in the assemblies and caused a change in the microenvironment of an encapsulated hydrophobic dye without any release. Acetonide groups on the dendron were deprotected to afford hydroxylated polymer that showed well‐defined morphologies above the LCST and after heating–cooling cycle while significant dye encapsulation was seen only above the LCST. © 2017 Society of Chemical Industry     

Tunable morphology and photoluminescence of poly(styrene‐block‐4‐vinylpyridine)–cadmium sulfide nanocomposites

Poly(styrene‐block‐4‐vinylpyridine) (PS4VP)–CdS nanocomposites containing different concentrations of CdS were synthesized by an in situ method. Scanning electron microscopy and transmission electron microscopy results indicate that the morphologies of PS4VP–Cd(II) and PS4VP–CdS were controlled by the Cd(II) concentration and the solvent, respectively. The effects of the CdS concentration on the crystal style of CdS in PS4VP–CdS and the photoluminescence (PL) properties of the PS4VP–CdS were also examined. By a comparison of the PL spectra of PS4VP–CdS in solutions, films, and powders, the PL mechanism of PS4VP–CdS was also delivered. The PS4VP–CdS nanocomposite shows potential for application in water‐soluble fluorescence probes. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Self‐assembled nanostructures of diblock copolymer films under homopolymer topcoats

To mitigate the interface energies of block copolymers with high interaction parameters, a topcoat strategy has been experimentally proposed to produce perpendicular oriented domains on a length scale of sub‐10 nm. However, the origin of perpendicular oriented domains and the effect of topcoats on the self‐assembled nanostructures remain to be uncovered. Herein, we use the dynamic self‐consistent field theory to explore the self‐assembly behaviors of symmetric block copolymer films under homopolymer topcoats. It is clearly demonstrated that the introduction of homopolymer topcoats enables a wide formation range of perpendicular oriented lamellae, originating from the fluctuating diblock copolymer/homopolymer interfaces in the process of in‐plane microphase separation of block copolymer films. Our simulation results also demonstrate that the formation range of perpendicular oriented lamellae can be tuned by changing the wetting properties of homopolymer topcoats and the thickness of block copolymer films, but is weakly dependent upon the chain length of homopolymers. Our theoretical findings have wide implications for understanding the formation of perpendicular oriented domains of block copolymer films, which are important for the rational design of self‐assembled nanostructures with new horizons for block copolymer lithography. © 2020 Society of Chemical Industry     

Synthesis of star–comb‐shaped polymer with porphyrin‐core and its self‐assembly behavior study

5,10,15,20‐tetra(4‐hydroxyphenyl)porphyrin (THPP) was synthesized by the condensation of pyrrole with 4‐hydroxybenzaldehyde in the presence of solvent (propionic acid). Subsequently, the resulting THPP was converted to a tetrafunctional star‐shaped macroinitiator (porphyrin‐Br₄) by esterification of it with 2‐bromopropanoyl bromide, and then atom transfer radical polymerization (ATRP) of styrene was conducted at 110°C with CuCl/2,2′‐bipyridine as the catalyst system. The resulting product was reacted with NBS to obtain star‐shaped initiator porphyrin‐(PSt‐Br)₄, which was used the following ATRP of the GMA to synthesize star–comb‐shaped grafted polymer porphyrin‐(PSt‐g‐PGMA)₄. The number molecular weight was 2.3 × 10⁴ g/mol, and the dispersity was narrow (M_w/M_n = 1.32). The structure of the polymers was investigated by NMR, UV–vis, IR, and GPC measurement. The self‐assembly behavior of the polymer porphyrin‐(PSt‐g‐PGMA)₄ was studied by DLS and AFM. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Emulsifier‐free synthesis and self‐assembly of an amphiphilic poly(styrene‐co‐acrylic acid) copolymer

A poly(styrene‐co‐acrylic acid) copolymer was synthesized by surfactant‐free polymerization with the assistance of power ultrasound in water. Fourier transform infrared, NMR, and differential scanning calorimetry measurements revealed that the copolymer was random. Atomic force microscopy and laser light scattering were used to investigate the self‐assembly of the copolymer, and it was found that the copolymer chains formed micelles or other self‐assemble structures in solution. Atomic force microscopy also indicated that the self‐assembled structures developed into nanospheres with a poly(acrylic acid)‐rich or polystyrene‐rich surface in a film, depending on the solvent used for the preparation of the film. In particular, a wheel‐like structure could resulted in a film when the copolymer film was prepared in a moist environment; it resulted from heterogeneous aggregates of poly(acrylic acid) at the rim of water bubbles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100:3718–3726, 2006