Improved Conformational Stability of the Visual G Protein‐Coupled Receptor Rhodopsin by Specific Interaction with Docosahexaenoic Acid Phospholipid

Rhodopsin is the photoreceptor located in the rod cells of the retina. It has seven transmembrane helices and is a prototypic member of the G protein‐coupled receptor superfamily. The structures and functions of these receptors are clearly affected by the lipid composition of the cell membrane, and their study in a purified recombinant form is usually performed in detergent solution. There is a need to study these receptors in a physiologically relevant environment because the lipid environment is known to have an important effect on their function. In this work, rhodopsin reconstituted in docosahexaenoic acid (DHA) liposomes is shown to have more thermal stability than when it is solubilised with the neutral detergent dodecyl maltoside. Moreover, the specific interaction between rhodopsin and DHA was followed by means of Langmuir experiments with insertion of rhodopsin into lipid monolayers; this showed high affinity for the lipid–receptor interaction. Furthermore, fluorescence spectroscopy measurements indicate that the conformation of opsin obtained after photobleaching is preserved in DHA‐containing liposomes, thereby allowing retinal to re‐enter the binding pocket even long after bleaching. Overall, our results demonstrate that liposomes of this specific lipid provide a more stable environment for ground‐state inactive rhodopsin in the dark, than dodecyl maltoside detergent, and that this lipid can also preserve the native correctly folded ligand‐free opsin conformation obtained after illumination. This strategy will be used in further studies on mutations of rhodopsin associated with congenital retinopathies.     

Tuning Cerium(IV)‐Assisted Hydrolysis of Phosphatidylcholine Liposomes under Mildly Acidic and Neutral Conditions

With the goal of designing a lysosomal phospholipase mimic, we optimized experimental variables to enhance Ce^IV‐assisted hydrolysis of phosphatidylcholine (PC) liposomes. Our best result was obtained with the chelating agent bis–tris propane (BTP). Similar to the hydrolytic enzyme, Ce^IV‐assisted hydrolysis of PC phosphate ester bonds was higher at lysosomal pH (～4.8) compared to pH 7.2. In the presence of BTP, the average cleavage yield at ～pH 4.8 and 37 °C was: 67±1 %, 5.7‐fold higher than at ～pH 7.2 and roughly equivalent to the percent of phospholipid found on the metal‐accessible exo leaflet of small liposomes. No Ce^IV precipitation was observed. When BTP was absent, there was significant turbidity, and the amount of cleavage at ～pH 4.8 (69±1 %) was 2.1‐fold higher than the yield obtained at ～pH 7.2. Our results show that BTP generates homogenous solutions of Ce^IV that hydrolyze phosphatidylcholine with enhanced selectivity for lysosomal pH.     

Synthesis and Characterization of a New Bifunctionalized,Fluorescent, and Amphiphilic Molecule for Recruiting SH‐Containing Molecules to Membranes

This study describes the synthesis and characterization of an amphiphilic construct intended to recruit SH‐containing molecules to membranes. The construct consists of 1) an aliphatic chain to enable anchoring within membranes, 2) a maleimide moiety to react with the sulfhydryl group of a soluble (bio)molecule, and 3) a fluorescence moiety to allow the construct to be followed by fluorescence spectroscopy and microscopy. It is shown that the construct can be incorporated into preformed membranes, thus allowing application of the approach with biological membranes. The close proximity between the fluorophore and the maleimide moiety within the construct causes fluorescence quenching. This allows monitoring of the reaction with SH‐containing molecules by measurement of increases in fluorescence intensity and lifetime. Notably, the construct distributes into laterally ordered membrane domains of lipid vesicles, which is probably triggered by the length of its membrane anchor. The advantages of the new construct can be employed for several biological, biotechnological, and medicinal applications.     

Synthesis and characterization of poly(ether‐block‐amide) membranes for the pervaporation of organic/aqueous mixtures

We made poly(ether‐block‐amide) membranes by casting a solution on a nonsolvent surface. The effects of the solvent ratio (n‐butanol/isopropyl alcohol), temperature, and polymer concentration on the quality of the membranes were studied. The results show that the film quality was enhanced with increasing isopropyl alcohol ratio in the solvent. This behavior was related to the reduction of the solution surface tension and the interfacial tension between the solution and nonsolvent. Uniform films were made at a temperature range of 70–80°C and a polymer concentration of 4–7 wt %. The morphology of the membranes was investigated with scanning electron microscopy. The qualities of the films improved with increasing isopropyl alcohol ratio in the solvent. With these membranes, the pervaporation of ethyl butyrate (ETB)/water and isopropyl alcohol/water mixtures was studied, and high separation performance was achieved. For ETB/water mixtures, with increasing ETB content, both the permeation flux and separation factor increased. However, for isopropyl alcohol/water mixtures, with increasing isopropyl alcohol content, the permeation flux increased, but the separation factor was diminished. Increasing temperature in a limited range resulted in a decreasing separation factor and an increasing permeation flux. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of poly(acrylic acid‐co‐N‐[3‐(dimethylamino)propyl]‐methacrylamide) hydrogel membranes for biomedical applications

A series of new hydrogel membranes with different compositions of acrylic acid (AAc) and N‐[3‐(dimethylamino)propyl]‐methacrylamide (DMAPMA) were prepared by aqueous copolymerization, without using chemical crosslinker or radiation. Chemical structure of the membranes (PADMAs) was characterized by Fourier transform infrared spectroscopy (FTIR). Swelling experiments were carried out in simulated body fluid (SBF) at 37 ± 1°C to investigate degree of swelling, dimensional stability, and pore size of the PADMA membranes. In SBF, the variation of pore size with membrane composition was monitored by optical microscopic technique. Morphology of the membranes was characterized, before and after exposure to SBF, by scanning electron microscopy (SEM). It was observed that the membranes are composed of closely packed nanogels of ～200 nm. Macroporous network structure of the SBF‐swollen PADMA was also observed to be composed of interconnected nanogels. Blood compatibility of the PADMA membranes was evaluated in vitro, by performing hemolysis assay and thrombogenicity assay. The extent of hemolysis due to PADMA membranes was found to be <2%, which ensured that all of the membranes were highly hemocompatible. Salicylic acid (SA) was chosen as a model drug. Diffusion coefficient of SA through PADMA membranes was investigated. It was observed that membrane composition regulates both pore size and drug diffusion. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Palladium(II)‐Catalyzed 1,4‐Addition of Arylboronic Acids to β‐Arylenones for Enantioselective Synthesis of 4‐Aryl‐4H‐chromenes

The enantioselective 1,4‐addition of arylboronic acids to β‐arylenones to give β‐diaryl ketones was carried out at 0–25 °C in the presence of a dicationic palladium(II) catalyst, [Pd(S,S‐chiraphos)(PhCN)₂](SbF₆)₂. Addition of a silver salt such as silver tetrafluoroborate [AgBF₄] or silver hexafluoroantimonate [AgSbF₆] (5–10 mol %) was effective to achieve high enantioselectivities at low temperatures (92–99 % ee) and to reduce the catalyst loading to 0.05 mol %. The protocol provided a simple access to 4‐aryl‐4H‐chromenes. Optically active chromenes were synthesized with up to 99 % ee via dehydration of the 1,4‐adducts between arylboronic acids and β‐(2‐hydroxyaryl)‐α,β‐unsaturated ketones.     

Synthesis,characterization, and metal complexation of poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) as polychelatogens in aqueous solution

We carried out the free‐radical copolymerization of N‐phenylmaleimide with acrylic acid and acrylamide with an equimolar feed monomer ratio. We carried out the synthesis of the copolymers in dioxane at 70°C with benzoyl peroxide as the initiator and a total monomer concentration of 2.5M. The copolymer compositions were obtained by elemental analysis and ¹H‐NMR spectroscopy. The hydrophilic polymers were characterized by elemental analysis, Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymers were performed. Hydrophilic poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) were used for the separation of a series of metal ions in the aqueous phase with the liquid‐phase polymer‐based retention method in the heterogeneous phase. The method is based on the retention of inorganic ions by the polymer in conjunction with membrane filtration and subsequent separation of low‐molecular‐mass species from the formed polymer/metal‐ion complex. The polymer could bind several metal ions, such as Cr(III), Co (II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) inorganic ions, in aqueous solution at pH values of 3, 5, and 7. The interaction of the inorganic ions with the hydrophilic polymer was determined as a function of pH and a filtration factor. Hydrophilic polymeric reagents with strong metal‐complexing properties were synthesized and used to separate those complexed from noncomplexed ions in the heterogeneous phase. The polymers exhibited a high retention capability at pH values of 5 and 7. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Synthesis and properties of sulfonated poly(phosphazene)‐graft‐poly(styrene‐co‐N‐benzylmaleimide) copolymers via atom transfer radical polymerization for proton exchange membrane

A series of sulfonated poly(phosphazene)‐graft‐poly(styrene‐co‐N‐benzylmaleimide) (PP‐g‐PSN) copolymers were prepared via atom transfer radical polymerization (ATRP), followed by regioselective sulfonation which occurred preferentially at the poly(styrene‐co‐N‐benzylmaleimide) sites. The structures of these copolymers were confirmed by Fourier transform infrared (FTIR) spectroscopy, ¹H‐NMR, and ³¹P‐NMR, respectively. The resulting sulfonated PP‐g‐PSN membranes showed high water uptakes (WUs), low water swelling ratios (SWs), low methanol permeability coefficients, and proper proton conductivities. In comparison with non‐grafting sulfonated poly(bis(phenoxy)phosphazene) (SPBPP) membrane previously reported, the present membranes displayed higher proton conductivity, significantly improved the thermal and oxidative stabilities. Transmission electron microscopy (TEM) observation showed clear phase‐separated structures resulting from the difference in polarity between the hydrophobic polyphosphazene backbone and hydrophilic sulfonated poly(styrene‐co‐N‐benzylmaleimide) side chains, indicating effective ionic pathway in these membranes. The results showed that these materials were promising candidate materials for proton exchange membrane (PEM) in direct methanol fuel cell (DMFC) applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42251.     

Formulation and Characterization of Taxifolin‐Loaded Lipid Nanovesicles (Liposomes,Niosomes, and Transfersomes) for Beverage Fortification

In this study, nanovesicles such as transfersomes, niosomes, and liposomes prepared by an ethanol injection method (EIM) (EIM) and formulated with soybean lecithin, Tween 80, Span 60, and cholesterol, are used to improve the bioavailability of taxifolin, a natural antioxidant with beneficial properties for health and food preservation. Morphology, stability, and the in‐vitro release of the optimal formulations are fully examined. The obtained results indicate that taxifolin‐loaded nanovesicles present sizes ranging between 98 and 215 nm along with a narrow size distribution (polydispersity index less than 0.250). The zeta potential of nanovesicles is negative and in the range of ?20.40 to ?32.20 mV. The optimal formulations with the maximum encapsulation efficiency (72–75%) are the transfersomes formulated with lecithin and Tween 80 in the presence and absence of cholesterol. Additionally, in vitro release behavior of nanovesicles shows low taxifolin released (3.68–10.13%) at intestinal conditions, whereas more than 90% of taxifolin is released in gastrointestinal conditions. The compatibility between taxifolin and nanovesicles components is confirmed by FTIR. Transmission electron microscopy demonstrates spherical shaped particles around 200 nm. Backscattering profiles variations show the potential application of taxifolin nanovesicles for producing fortified apple juice with excellent physical stability. Practical Applications: Taxifolin is a flavanonol, which fulfills a particular task in preserving stable functions of the circulatory system owing to its special antioxidant ability and biological activity. Nevertheless, its low bioavailability is a salient drawback for biomedical and food applications. Thus, the current study is conducted to encapsulate taxifolin in nanovesicles (such as liposome, niosome, transfersome) by EIM to improve its bioavailability. Nanocarriers with relatively decent physical stability and high encapsulation efficiency can be brought about through Tween 80, soybean lecithin, and in the presence and absence of cholesterol as stabilizer which ensures the successful delivery of taxifolin to food formats such as beverages.     

Synthesis and characterization of poly(o‐ and m‐amino benzyl amine) and the copolymers with aniline. Study with Cu(II)

Poly(o‐amino benzyl amine), poly(m‐amino benzyl amine), and the copolymers with aniline were synthesized in 10^?4M HCl by using ammonium persulfate as oxidizing agent. The copolymers were synthesized at various feed mole fractions of comonomer diamine and characterized by elemental analysis, FTIR, ¹H‐NMR spectroscopy, and electrical conductivity. The polymerization yield depended on the substituent position in the aromatic ring. Copper ion was incorporated in the polymers and the amount depended on the side groups position in the aromatic ring. The thermal stability increased when copper ions and aniline units were incorporated in the polymers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 31–36, 2004     

Synthesis of a poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino) ethyl methacrylate] block copolymer and its effects on the surface charges and pH‐responsive properties of poly(vinylidene fluoride) blend membranes

A poly(methyl methacrylate) (PMMA)‐b‐poly[2‐(N,N‐dimethylamino) ethyl methacrylate] (PDMAEMA) block copolymer was successfully synthesized by a reversible addition–fragmentation chain‐transfer method. The resulting copolymer was used to prepare poly(vinylidene fluoride) blend membranes via a phase‐inversion technique. The polymorphism, structure, and properties of the blend membranes were investigated by Fourier transform infrared spectrometry, scanning electron microscopy (SEM), ζ potential analysis, and filtration. The results indicate that PMMA‐b‐PDMAEMA could migrate onto the surface of the membrane during the coagulation process, and more of the β‐crystal phase appeared with the increase of the block copolymer in the membranes. The surface morphology and cross section of the membranes were also affected by the copolymer, as shown by SEM. The ζ‐potential results show that the surface charges of the membrane could be changed from positive to negative at an isoelectric point as the pH increased. The blend membrane also exhibited good pH sensitivity, and its water flux showed a great dependence on pH. The filtration experiment also indicated that the blend membrane had good hydrophilicity and antifouling properties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40685.     

Synthesis and characterization of poly(vinyl alcohol)‐based membranes for direct methanol fuel cell

Membranes made of poly(vinyl alcohol) (PVA) and its ionic blends with sodium alginate (SA) and chitosan were synthesized and characterized for their ion-exchange capacity (IEC) and swelling index values to investigate their applicability in direct methanol fuel cells (DMFCs). These membranes were assessed for their intermolecular interactions, thermal stabilities, and mechanical strengths with Fourier transform infrared spectroscopy, X-ray diffraction methods, differential scanning calorimetry, thermogravimetric analysis, and tensile testing, respectively. Methanol permeability and proton conductivity were also estimated and compared to that of Nafion 117. In addition to being effective methanol barriers, the membranes had a considerably high IEC and thermal and mechanical stabilities. The addition of small amounts of anionic polymer was particularly instrumental in the significant reduction of methanol permeability from 8.1 × 10⁻⁸ cm²/s for PVA to 6.9 × 10⁻⁸ cm²/s for the PVA–SA blend, which rendered the blend more suitable for a DMFC. Low methanol permeability, excellent physicomechanical properties, and above all, cost effectiveness could make the use of these blends in DMFCs quite attractive. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1154–1163, 2005     

One Step Synthesis of Chiral Olefins via Asymmetric Diamination and their Applications as Ligands for Rhodium(I)‐Catalyzed 1,4‐Additions

A variety of acyclic chiral dienes were synthesized in a single step via palladium(0)‐catalyzed asymmetric allylic and homoallylic C H diamination of terminal olefins. The applications of such simple dienes as steering ligands for rhodium(I)‐catalyzed asymmetric 1,4‐additions afforded the corresponding adducts in excellent yields and up to 85% ee.     

Electrochemical and Conformational Consequences of Copper (CuI and CuII) Binding to β‐Amyloid(1–40)

Copper‐induced structural rearrangements of Aβ40 structure and its redox properties are described in this study. Electrochemical and fluorescent methods are used to characterise the behaviour of Aβ–Cu species. The data suggest that time‐dependent folding of Aβ–Cu species may cause changes in the redox potentials.

     

Polypropylene separator coated with a thin layer of poly(lithium acrylate‐co‐butyl acrylate) for high‐performance lithium‐ion batteries

In this paper, poly(lithium acrylate‐co‐butyl acrylate) [P(AALi‐co‐BA)] was synthesized, and a P(AALi‐co‐BA)‐coated polypropylene (PP) separator was prepared by a simple dip‐coating process. In contrast to the conventional thick, dense gel polymer coating layer, a thin P(AALi‐co‐BA) layer was formed on the PP separator, which had less influence on the pore structure of the original PP separator and was beneficial for the migration of lithium ions through the separator. Furthermore, the AALi units in the copolymer could improve the wettability of the separator, while the BA units provided the separator with strong adhesion to the electrodes. As expected, the modified separators showed good wettability, high ionic conductivity, and excellent interface stability. In addition, the cycle stability and rate performance were also improved significantly. This facile, affordable, and effective method has great application potential for the modification of polyolefin‐based separators. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46423.     

Synthesis and characterization of conducting poly(aniline‐co‐diaminodiphenylsulfone) copolymers

Polyaniline, poly(aniline‐co‐4,4′‐diaminodiphenylsulfone), and poly(4,4′‐diaminodiphenylsulfone) were synthesized by ammonium peroxydisulfate oxidation and characterized by a number of techniques, including infrared spectroscopy, ultraviolet–visible absorption spectroscopy, ¹H‐NMR, thermogravimetric analysis, and differential scanning calorimetry. These copolymers had enhanced solubility in common organic solvents in comparison with polyaniline. The conductivities of the HCl‐doped polymers ranged from 1 S cm^?1 for polyaniline to 10^?8 S cm^?1 for poly(4,4′‐diaminodiphenylsulfone). The copolymer compositions showed that block copolymers of 4,4′‐diaminodiphenylsulfone (r₁ > 1) and aniline (r₂ < 1) formed and that the reactivity of 4,4′‐diaminodiphenylsulfone was greater than that of aniline. The results were explained by the effect of the ? SO₂? group present in the polymer structure. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2337–2347, 2003