共查询到20条相似文献,搜索用时 406 毫秒
1.
稀土尾气催化剂的制备与性能 总被引:3,自引:0,他引:3
采用在乙醇溶剂中的CeZrLaPr氢氧化物脱水、晶化和干燥一步完成的方法,制得粒径5nm、高储氧能力的(CeZrLaPr)O稀土尾气催化剂。 相似文献
2.
3.
4.
5.
6.
瑞士汽巴-嘉基公司1978年5月申请专刊,并于1979年获准的 Ger.Offen.2,918,262介绍,1-硝基蒽醌在水、乙醇和碱金属氢氧化物的混合物中,于肼或羟胺衍生物存在下进行回流,蒸馏除去乙醇,加入 相似文献
7.
本文根据电负性均衡原理和电负性平衡观点,提出了计算氢氧化物中各原子的部分电荷的近似方法,并估算了56种氢氧化物。在此基础上提出了用氢氧化物中阳离子极化力(Z~(*~2)/r)和金属原子部分电荷(δ~2/r)表示其溶解度的经验公式,并计算了56种氢氧化物的溶解度,其结果与实验值基本一致。 相似文献
8.
《精细化工原料及中间体》2006,(1):42-43
由生物质生产碳水化合物、乙醇和树脂本发明披露了用生物质生产乙醇的过程,通过加热含有20-40%碱金属氢氧化物的水溶液使木质纤维素键断裂。然后继续加热生物质,除去由于从纤维素和木素生成碳水化合物混合物而产生的二氧化碳,调节钠木素,微纤维,木素纤维树脂产品和碳酸钠。加水 相似文献
9.
以γ-Al2O3(勃姆石在700℃保温4 h热处理后的产物)、α-Al2O3(Al(OH)3在1 400℃保温4 h热处理后的产物)、勃姆石、Al(OH)3为原料,与轻烧MgO按n(Al2O3):n(MgO)=1的组成配料并制备试样,研究了在800~1 600 ℃下不同氧化铝及其对应的氢氧化物对合成尖晶石的影响.结果表明:γ-Al2O3和α-Al2O3分别同与其对应的氢氧化物为原料的试样具有相似的烧结性能;且以氢氧化物为原料比以氢氧化物煅烧后所得的氧化物为原料更有利于尖晶石的生成,但不利于尖晶石的致密化. 相似文献
10.
11.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
13.
14.
D. G. Gordeev L. F. Gudarenko M. V. Zhernokletov V. G. Kudel’kin M. A. Mochalov 《Combustion, Explosion, and Shock Waves》2008,44(2):177-189
A semi-empirical equation of state for metals is described. Its capabilities are demonstrated by the example of the equation
of state for aluminum. New experimental data are presented on the location of the isentrope of aluminum for unloading from
the state at p = 229.71 GPa on the shock adiabat to an aerogel (SiO2) of density 0.08 g/cm3.
__________
Translated from Fizika Goreniya i Vzryva, Vol. 44, No. 2, pp. 61–75, March–April, 2008. 相似文献
15.
16.
17.
Jorge Marcelo Romero Soledad Bustillo Hugo Enrique Ramirez Maisuls Nelly Lidia Jorge Manuel Eduardo Gómez Vara Eduardo Alberto Castro Alicia H. Jubert 《International journal of molecular sciences》2007,8(7):688-694
A thermochemical rather simple experimental technique is applied to determine the enthalpy of formation of Diperoxide of ciclohexanone. The study is complemented with suitable theoretical calculations at the semiempirical and ab initio levels. A particular satisfactory agreement between both ways is found for the ab initio calculation at the 6–311G basis This set level. Some possible extensions of the present procedure are pointed out. 相似文献
18.
A perturbation viscometer is a differential capillary viscometer that measures the logarithmic viscosity gradient of the viscosity-composition curve for gas mixtures. Measurements are made at different gas mixture compositions. Integration of the logarithmic viscosity gradients measured over the full composition range gives the mixture viscosity relative to the viscosity of one of the pure components of the gas mixture. This method is attractive because, for measurements of equal precision, integration of the gradients is potentially an order of magnitude more precise than measurement of the viscosities directly. It can also work at high and low temperatures and perhaps high pressures.The perturbation viscometer has been used to make measurements on ideal gas mixtures at ambient and elevated temperatures. The situation is more complicated when the gas mixtures are non-ideal. Extra effects due to density differences, molar volume change on mixing and differential thermal expansion may be measured in addition to the desired viscosity change producing systematic errors in the results. Thus, a more sophisticated apparatus is required. The standard perturbation viscometer has been modified to separate out the extra effects to permit measurement of the true change in viscosity. In addition, the theoretical operation of the modified apparatus has been revised to account for the design changes to permit calculation of the viscosity-composition profiles from the results.The apparatus has been tested using helium-HFC-125 mixtures and two new viscosity-composition profiles are presented for these mixtures at 23 and . Internal consistency tests have been used to confirm that the data produced are of high quality with an estimated uncertainty in the viscosity ratio data at of 0.9% and at of 1.5%. 相似文献
19.
塔设备改造选型的分析 总被引:2,自引:0,他引:2
就当前扩产增容中塔设备设计和改造时板式塔和填料塔的选型问题加以分析。在评述目前国内常用的几种塔板和新型填料之后,着重介绍一种新型塔板(导向梯形浮阀塔板)和一种新型填料(波环填料——乾隆帕克)。 相似文献