The sol-gel process synthesis of GdAl3(BO3)4:Eu3+ nanophosphors

GdAl3(BO3)4:Eu3+ red phosphors were prepared using citric acid as complex agent by sol-gel technique. The preparation conditions of the precursor synthesis, including crystallization temperature and crystallization time were investigated. Their structure and luminescence properties were characterized by X-ray diffraction (XRD) analysis and fluorescence spectrometry. The results showed that GdAl3(BO3)4:Eu3+ phosphor crystallized at 960 degrees C for 2 h have been synthesized by sol-gel method. The phosphor is distributed into hexagonal system and the lattice parameters are a = 9.2992 nm c = 7.2577 nm. The excitation spectrum of Gd(0.95)Al3(BO3)4:Eu(0.05)3+ samples is complex and the frequency scale is wide. It consists of a number of main excitation transitions namely 8S(7/2) --> 6IJ (270 nm) of Gd3+, and the others 7F0 --> 5L6 (400 nm), 7F0 --> 5D2 (472 nm) and 7F0 --> 5D1 (542 nm) of Eu3+. The main emission peaks are 614 nm and 619 nm, which are the characteristic emission peaks of Eu3+. These emission peaks correspond to the transition from 5D0 to 7F2 of Eu3+. The shape and the wavelength range of the emission spectrum are similar when the sample was excited by different excitation spectrum. Only the relative intensity of the emission peaks is different from each other.     

Nanostructured CaWO4, CaWO4:Eu3+ and CaWO4:Tb3+ particles: sonochemical synthesis and luminescent properties

Nanostructured CaWO4, CaWO4:Eu3+, and CaWO4:Tb3+ phosphor particles were synthesized via a facile sonochemical route. X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, photoluminescence, low voltage cathodoluminescence spectra, and photoluminescence lifetimes were used to characterize the as-obtained samples. The X-ray diffraction results indicate that the samples are well crystallized with the scheelite structure of CaWO4. The transmission electron microscopy and field emission scanning electron microscopy images illustrate that the powders consist of spherical particles with sizes from 120 to 160 nm, which are the aggregates of even smaller nanoparticles ranging from 10 to 20 nm. Under UV light or electron beam excitation, the CaWO4 powder exhibited a blue emission band with a maximum at 430 nm originating from the WO4/2- groups, while the CaWO4:Eu3+ powder showed red emission dominated by 613 nm ascribed to the 5D0 --> 7F2 of Eu3+, and the CaWO4:Tb3+ powders showed emission at 544 nm, ascribed to the 5D4 --> 7F5 transition of Tb3+. The PL excitation and emission spectra suggest that the energy is transferred from WO4/2- to Eu3+ CaWO4:Eu3+ and to Tb3+ in CaWO4:Tb3+. Moreover, the energy transfer from WO4/2- to Tb3+ in CaWO4:Tb3+ is more efficient than that from WO4/2- to EU3+ in CaWO4:Eu3+. This novel and efficient pathway could open new opportunities for further investigating the novel properties of tungstate materials.     

Preparation and luminescence properties of La6MoO12:Eu3+/PVA nanofibers by Pechini/electrospinning process

The 20% concentration Eu3+-based red-emitting phosphor, nano-sized La6MoO12:Eu3+ was prepared by the Pechini method. X-ray diffraction (XRD), thermogravimetric and differential thermal analysis (TG-DTA), scanning electron microscopy (SEM), photoluminescence (PL), and decay curves were used to characterize the resulting samples. The phosphor can be efficiently excited by near UV light and exhibits an intense red luminescence corresponding to the electric dipole transition 5D0 --> 7F2 at 615 nm. When the phosphor was mixed into poly(vinyl alcohol) aqueous solution, the fluorescent nanofibers could be prepared by electrospinning process. It was suggested that the La6MoO12:Eu3+ phosphor would be a promising red component for solid-state lighting devices based on InGaN or GaN light-emitting diodes.     

Luminescent properties of La3PO7:Eu3+ nanoparticles

La3PO7:Eu3+ samples were prepared by combustion and annealing and characterized by X-ray diffraction and transmission electron microscopy. It was found that the average size of the particles is about 80 nm. The red emission from the 5D0 --> 7F2 transition of the Eu3+ ions under ultraviolet light excitation is much stronger than the orange emission from the 5D0 --> 7F1 transition. The emission spectra, charge transfer band, laser selective excitation spectra, and time-resolved spectra indicate that symmetry of the local environment of Eu3+ lacks an inversion center and Eu3+ ions occupy at least two types of sites in the La3PO7 crystal. The superior color chromaticity compared to other phosphates and borates doped with Eu3+ means La3PO7:Eu3+ may have potential as a luminescent material.     

Eu-doped titania nanofibers: processing, thermal behaviour and luminescent properties

Undoped and Europium-doped titania nanofibers have been fabricated by electrospinning technique, using a single multielement Titanium/Europium source. In this communication we present the synthesis, structural and spectroscopic characterisation of Eu-doped TiO2 nanofibers starting from polyvinylpyrrolidone, titanium tetraisopropoxide (Ti(OiPr)4) and Eu(hfa)3 x diglyme (Hhfa = 1,1,1,5,5,5-hexafluoroacetyacetone, diglyme = CH3O(CH2CH2O)2CH3). The chosen system allowed to investigate a wide compositional range, i.e., from 3 to 10% mol of Eu3+. Microstructure was studied by means of scanning electron microscopy (SEM), thermal behaviour followed by thermogravimetric and differential thermal analysis (TG-DTA). Phase analysis was performed by means of X-ray diffraction (XRD) and high temperature X-ray diffraction analysis (HT-XRD) up to 1100 degrees C. Luminescence properties were investigated by means of luminescence spectroscopy, using a laser excitation source at 395 nm. All electrospun materials consisted of randomly oriented nanofibers of fairly uniform diameter. The average fiber size was 80-100 nm and 40 nm for, respectively, Eu-doped and undoped TiO2 calcinated at 500 degrees C. The presence of Europium shifted toward higher values either the crystallization temperature of anatase and the anatase to rutile phase transition, the latter being accompanied by the formation of the Eu2Ti2O7 phase. The doped samples showed a strong luminescence of Eu3+ ions. The emission spectra were dominated by the 5D0 --> 7F2 emission, suggesting a notable distortion around the Eu3+ ions. The broadening of the bands pointed to the presence of a relevant inhomogeneous disorder around the Eu3+ sites. The Eu3+ doped TiO2 nanofibers showed a higher emission intensity with respect to the PVP/TiO2 ones.     

低温燃烧法合成γ-LiAlO2:Eu3+红色荧光粉及其发光性能

低温燃烧法合成了γ-LiAlO2:Eu3+红色荧光粉,采用XRD、SEM、PL对样品进行了结构、形貌及发光性能表征。结果表明样品为四方晶系结构,在395nm的紫外光激发下,样品发射峰位于578、588、613、651和700nm,对应Eu3+离子的5 D0→7FJ=0,1,2,3,4的能级跃迁,主峰位于613nm处。其发光强度与Eu3+和H3BO3的掺量密切相关。     

Hydrothermal synthesis and photoluminescence of Eu(2-x)Sm(x)Sn2O7 (x = 0-2.0) nanophosphors

Eu(2-x)Sm(x)Sn2O7 (x = 0, 0.1, 0.5, 1.0, 1.5, and 2.0) solid solutions were successfully synthesized by a simple, mild hydrothermal process. The crystal structure, particle size, and chemical composition of the solid solutions were characterized by X-ray diffraction, transmission electron microscopy, and energy dispersive X-ray spectroscopy. X-ray diffraction patterns and transmission electron microscopy images reveal that all the products were cubic pyrochlore-type Eu(2-x)Sm(x)Sn2O7 nanocrystals with the diameter of approximately 20 nm. Due to efficient energy transfer from Sm3+ to Eu3+, the Eu(2-x)Sm(x)Sn2O7 (x = 0.1, 0.5, 1.0, and 1.5) nanocrystals exhibited strong 5D0 --> 7F1 photoluminescence emission of Eu3+. The dominant 5D0 --> 7F1 transition revealed good monochromaticity and low distortion of the Eu(2-x)Sm(x)Sn2O7 nanophosphors.     

Spherical SiO2 @ GdPO4: Eu3+ core-shell phosphors: sol-gel synthesis and characterization

Nanocrystalline GdPO4 : Eu3+ phosphor layers were coated on non-aggregated, monodisperse and spherical SiO2 particles by Pechini sol-gel method, resulting in the formation of core-shell structured SiO2 @ GdPO4 : Eu3+ particles. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), photoluminescence (PL), low-voltage cathodoluminescence (CL), time-resolved PL spectra and lifetimes were used to characterize the core-shell structured materials. Both XRD and FT-IR results indicate that GdPO4 layers have been successfully coated on the SiO2 particles, which can be further verified by the images of FESEM and TEM. Under UV light excitation, the SiO2 @ GdPO4 : Eu3+ phosphors show orange-red luminescence with Eu3+ 5D0-7F1 (593 nm) as the most prominent group. The PL excitation and emission spectra suggest that an energy transfer occurs from Gd3+ to Eu3+ in SiO2 @ GdPO4 : Eu3+ phosphors. The obtained core-shell phosphors have potential applications in FED and PDP devices.     

Synthesis and luminescence properties behavior of Eu(3+)-doped nanocrystalline and bulk GdVO4 phosphors by high-energy ball milling and solid state reaction

Europium-doped nanosized-GdVO4:Eu3+ powders and bulk GdVO4:Eu3+ powders were synthesized using a planetary ball mill and conventional solid state reaction method, respectively. The effects of the grain size on the crystallinity, morphology, structure and luminescence spectra were investigated by X-ray diffraction, field emission-scanning electron microscopy and photoluminescence spectroscopy (PL). The room temperature PL spectra of the GdVO4:Eu3+ nanophosphors showed four emission bands at 611, 615, 619 and 595 nm. The bands at 611, 615 and 619 nm were assigned to the 5D0 --> 7F2 transition of the EU3+ ion when excited with 312 nm light.     

Fabrication of SiO2@ZrO2@Y2O3:Eu3+ core-multi-shell structured phosphor

ZrO2 interface was designed to block the reaction between SiO2 and Y2O3 in SiO2@Y2O3:Eu coreshell structure phosphor. SiO2@ZrO2@Y2O3:Eu core-multi-shell phosphors were successfully synthesized by combing an LBL method with a Sol-gel process. Based on electron microscopy, X-ray diffraction, and spectroscopy experiments, compelling evidence for the formation of the Y2O3:Eu outer shell on ZrO2 were presented. The presence of ZrO2 layer on SiO2 core can block the reaction of SiO2 core and Y2O3 shell effectively. By this kind of structure, the reaction temperature of the SiO2 core and Y2O3 shell in the SiO2@Y2O3:Eu core-shell structure phosphor can be increased about 200-300 degrees C and the luminescent intensity of this structure phosphor can be improved obviously. Under the excitation of ultraviolet (254 nm), the Eu3+ ion mainly shows its characteristic red (611 nm, 5D0-7F2) emissions in the core-multi-shell particles from Y2O3:Eu3+ shells. The emission intensity of Eu3+ ions can be tuned by the annealing temperatures, the number of coating times, and the thickness of ZrO2 interface, respectively.     

Y2O3:Eu3+ core-in-multi-hollow microspheres: facile synthesis and luminescence properties

Y2O3:Eu3+ core-in-multi-hollow microspheres were synthesized via a facile hydrothermal method in the presence of glucose followed by a subsequent heat-treatment process. X-ray diffraction (XRD) pattern shows that the as-obtained hollow spheres are cubic phase of Y2O3. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) images indicate that the samples are three layer hollow spheres with a diameter of 2-4 microm and the outermost wall thickness of 100 nm, the size of the inner core is about 300-400 nm, and the sub-outer wall thickness is about 100 nm. X-ray energy dispersive spectrum (EDS) shows that the samples are composed of Y, Eu and O. Photoluminescence spectra show that the hollow spheres have a strong characteristic red emission corresponding to the 5D0 - 7F2 transition of Eu3+ ions under ultraviolet excitation. This method can be used to synthesize other rare earth oxide hollow luminescent materials.     

One-step synthesis and luminescent properties of nanocrystalline YVO4:Eu3+ powders

In this paper, nanocrystalline YVO4:Eu3+ powders have been successfully synthesized via high-temperature solution-phase synthesis process. The nanocrystalline YVO4:Eu3+ particles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV/Nis absorption spectra and luminescence spectra, luminescence decay curve and Fourier transform infrared (FT-IR), X-ray photoelectron spectra (XPS) respectively. The as-prepared nanocrystalline YVO4:Eu3+ particles are well crystallized with ellipsoidal morphology. The emission of YVO4:Eu3+ particles show emission originating from the 5D0 level, with 5D0-7F2 at 616 nm as the most prominent group. The excitation spectrum fits basically with the absorption spectrum from the vanadate ions. FT-IR and XPS spectra indicate that the surface ligands of nanocrystalline particles were oleic acid and oleylamine. The lifetime for the luminescence of Eu3+ in the as-prepared YVO4:Eu3+ samples are shorter than that of the bulk material due to the absorption of organic ligands on the nanoparticle surface.     

Luminescence properties of nano-sized Sr2MgSiO5: Eu2+, Mn2+ phosphors prepared by the sol-gel method

Nano-sized Sr2MgSiO5:Eu2+, Mn2+ phosphor was synthesized by the sol-gel method. The preparation conditions of the precursor were determined. The effect of Eu2+ and Mn2+ content on the luminescence intensity was studied. X-ray diffraction (XRD), photoluminescence spectra (PL), and photoluminescence excitation spectra (PLE) were used to characterize the samples. The results showed that the excitation bands ranged from 250 to 450 nm, and their peaks positioned around 365 nm. The emission spectrum consists of three bands: blue, green, and red, respectively. The blue and green emission bands originate from the center of the Eu2+, while the red emission band is attributed to the energy transfer from Eu2+ to Mn2+. White light can be obtained by mixing the three emission colors. The experiment results show that the Sr2MgSiO5:Eu2+, Mn2+ is a single host phosphor with superior properties for use in white light emitting diodes (white LED).     

Synthesis and characteristics of tb-doped Y2SiO5 nanophosphors and luminescent layer for enhanced photovoltaic cell performance

Nanophosphors based on green emitting terbium doped yttrium silicates with the general formula Y2SiO5:Tb3+ with a size of 30-60 nm were synthesized by the hydrothermal method. The prepared nanophosphors were characterized by X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, UV-Vis diffuse reflectance spectroscopy and fluorescence spectroscopy. It was found that the nanophosphors crystallize in an X1-type monoclinic structure (P2(1)/c) and absorb UV light from 220 to 300 nm which they then down-convert into visible-light (strong green emission at around 545 nm (5D4-->7F(J. As TiO2-based dye-sensitized solar cells exhibit their maximum incident photon to current efficiency at around 500-600 nm, the wavelength-modulation characteristics of the nanophosphors can be efficient for dye-sensitized solar cell systems. Therefore, the Y2SiO5:Tb3+ nanophosphors were introduced into a TiO2-based dye-sensitized solar cell and their effects on the performance of the solar cell were investigated.     

Hydrothermal synthesis and size-enhanced chromaticity of Sr2ZnSi2O7:Eu3+ nanoparticles

Red phosphor Sr2ZnSi2O7:Eu3+ nanoparticles with an average diameter of 20 nm were successfully synthesized via a low-temperature hydrothermal route in order to understand the underlying relationship between size and luminescent properties. The nanometer-sized particles result in a distinct improvement in chromaticity and a high quenching concentration. According to emission spectra, the relative intensity of the 5D0 --> 7F2 to 5D0 --> 7F1 transitions in nanometer-sized phosphors is higher than that of the corresponding bulk material. The better chromaticity results from the more distorted lattices and relatively lower crystal symmetry around the Eu3+ ions, which is ascribed to the large surface area due to the nanometer size of the phosphor. Moreover, the nanometer-sized Sr2ZnSi2O7:Eu3+ red phosphor exhibits a shorter fluorescent lifetime and a blue-shift in excitation spectra compared to that of its bulk counterpart. These results indicate that size-induced enhancement of luminescent properties is an efficient way to obtain red phosphors with better chromaticity.     

Eu2+、Dy3+、Li+共掺杂CaSi2O2N2荧光粉的发光性能

采用高温固相反应法制备了一系列白光LED用CaSi2O2N2:0.05Eu2+,xDy3+,xLi+(0≤x≤0.03)荧光粉.利用X射线衍射仪对样品的物相结构进行了分析,结果表明:Dy3+和Li+离子的掺入没有改变CaSi2O2N2:Eu2+荧光粉的主晶相.利用荧光光谱仪对样品的发光性能进行了测试,发现所有样品的激发光谱均覆盖了从近紫外到蓝光的较宽范围,400 nm激发下得到的发射光谱为宽波段的单峰,峰值位于545 nm左右,是Eu2+离子5d-4f电子跃迁引起的.Dy3+离子掺杂可以提高CaSi2O2N2:Eu2+荧光粉的发光强度,Dy3+与Li+共掺杂可进一步提高荧光粉的发光强度,当Dy3+和Li+的掺杂量为1mol%时,荧光粉的发光强度达到最大值,是单掺杂Eu2+的荧光粉发光强度的157%.     

BaAl_2O_4:Eu~(2+),Dy~(3+)长余辉发光材料的燃烧合成及其发光特性

以金属硝酸盐和尿素为原料,采用燃烧法合成了发青绿光的BaAl2O4:Eu2+,Dy3+长余辉发光材料。采用XRD、SEM、荧光分光光度计等手段对其进行分析表征。研究结果表明:随着燃烧温度升高,燃烧反应加剧,副产物BaCO3的含量减少,BaAl2O4的结晶程度增加,晶粒尺寸增大。Ba-Al2O4:Eu2+,Dy3+的激发光谱和发射光谱峰值分别为310nm和500nm,均呈宽谱带特征,其发光是由Eu2+的4f65d1→4f7跃迁引起,长余辉特性主要基于Dy3+的电子陷阱作用。     

Ca10K（PO4）7:Eu3+红色荧光粉的制备及其发光性质

高温固相法合成了Ca10-xK(PO4)7:xEu3+(x=0.02,0.04,0.06,0.08,0.10,0.12,0.14和0.16)的红色荧光粉。X射线衍射表明,样品具有标准的Ca10K(PO4)7六角晶体结构,且无第二相存在。在393nm的波长激发下,样品获得由Eu3+的4f-4f跃迁产生红光发射,其中以613nm附近的5 D0→7F2电偶极跃迁发射为最强。通过调节Eu3+的掺杂浓度,获得了色坐标与商业化Y2O2S:Eu3+荧光粉十分接近的接近纯色的红色荧光粉。Ca10K(PO4)7:Eu3+是一种可望应用于紫外激发的白光LED的红色荧光粉。     

表面效应对YAG:Eu3+纳米晶发光特性的影响研究

分别采用沉淀法和燃烧法制备了YAG:1%Eu3+纳米晶粉末,用XRD和TEM对样品进行了结构分析和形貌表征。室温光谱分析表明,其发射主峰位于590nm,来源于5 D0→7F1跃迁,另外来源于5 D0→7F4跃迁的709nm发射也较强。另外发现,燃烧法制备的样品在不同激发波长激发时,发射光谱峰形有显著变化。对沉淀法制备的纳米微粒经盐酸"浸蚀"表面修饰后,发现395nm激发时,676nm和693nm发光显著增强,而且693nm发射的激发谱中存在两个宽激发带。对表面修饰后样品的变温发光特性研究发现,随着温度的降低,676nm发射显著增强,而693nm发射显著减弱。对于上述现象通过纳米微粒的表面效应和缺陷态进行了分析和解释。     

Study on luminescent properties of Eu3+ doped Gd2WO6, Gd2W2O9 and Gd2(WO4)3 nanophosphors prepared by co-precipitation

Eu3+ doped Gd2WO6, Gd2W2O9 and Gd2(WO4)3 nanophosphors with different concentrations have been prepared by co-precipitation. XRD (X-ray diffraction) and SEM (scanning electron microscopy) were used to investigate the structure and morphology. The emission spectra, excitation spectra and fluorescence decay curves were measured, and partial J-O parameters and quantum efficiencies of Eu3+ 5D0 energy level were calculated. Furthermore, concentration quenching curves of Eu3+ in different hosts were drawn. The photoluminescent properties of Eu3+ doped Gd2WO6, Gd2W2O9 and Gd2(WO4)3 nanophosphors have been studied. The results indicate that Eu3+ 5D0-7F2 red luminescence can be effectively excited by 395 nm and 465 nm in Gd2WO6 and Gd2W2O9 hosts, similar to the familiar Gd2(WO4)3:Eu. Especially Gd2W2O9:Eu has strong red emission and high quenching concentration, so it has potential applications for trichromatic white LED as red fluorescent materials.