Electroluminescence from a single nanotube-molecule-nanotube junction

The positioning of single molecules between nanoscale electrodes has allowed their use as functional units in electronic devices. Although the electrical transport in such devices has been widely explored, optical measurements have been restricted to the observation of electroluminescence from nanocrystals and nanoclusters and from molecules in a scanning tunnelling microscope setup. In this Letter, we report the observation of electroluminescence from the core of a rod-like molecule between two metallic single-walled carbon nanotube electrodes forming a rigid solid-state device. We also develop a simple model to explain the onset voltage for electroluminescence. These results suggest new characterization and functional possibilities, and demonstrate the potential of carbon nanotubes for use in molecular electronics.     

A single-molecule potentiometer

Controlling electron transport through a single-molecule device is key to the realization of nanoscale electronic components. A design requirement for single molecule electrical devices is that the molecule must be both structurally and electrically connected to the metallic electrodes. Typically, the mechanical and electrical contacts are achieved by the same chemical moiety. In this study, we demonstrate that the structural role may be played by one group (for example, a sulfide) while the electrical role may be played by another (a conjugated chain of C═C π-bonds). We can specify the electrical conductance through the molecule by modulating to which particular site on the oligoene chain the electrode binds. The result is a device that functions as a potentiometer at the single-molecule level.     

Nanofluidic networks based on surfactant membrane technology

We explore possibilities to construct nanoscale analytical devices based on lipid membrane technology. As a step toward this goal, we present nanotube-vesicle networks with fluidic control, where the nanotube segments reside at, or very close (<2 microm) to optically transparent surfaces. These nanofluidic systems allow controlled transport as well as LIF detection of single nanoparticles. In the weak-adhesion regime, immobilized vesicles can be approximated as perfect spheres with nanotubes attached at half the height of the vesicle in the axial (z) dimension. In the strong-adhesion regime (relative contact area, Sr* approximately 0.3), nanotubes can be adsorbed to the surface with a distance to the interior of the nanotubes defined by the membrane thickness of approximately 5 nm. Strong surface adsorption restricts nanotube self-organization, enabling networks of nanotubes with arbitrary geometries. We demonstrate LIF detection of single nanoparticles (30-nm-diameter fluorescent beads) inside single nanotubes. Transport of nanoparticles was induced by a surface tension differential applied across nanotubes using a hydrodynamic injection protocol. Controlled transport in nanotubes together with LIF detection enables construction of nanoscale fluidic devices with potential to operate with single molecules. This opens up possibilities to construct analytical platforms with characteristic length scales and volume orders of magnitudes smaller than employed in traditional microfluidic devices.     

Electron transport in single molecules measured by a distance-modulation assisted break junction method

We describe a method to determine whether a measured current in a break junction is due to electron tunneling via space or conduction through a molecule bridged between two electrodes. By modulating the electrode separation, we monitor both the DC and the AC components of the current. The AC component indicates if a molecule is connected to the electrodes while the DC component is the transport current through the molecule. This method allows us to remove the tunneling background from conductance histograms and unambiguously measure the I- V characteristic of single molecules. Furthermore, it provides valuable information about the electromechanical properties of single molecules.     

Imaging the passage of a single hydrocarbon chain through a nanopore

Molecular transport through nanoscale pores in films, membranes and wall structures is of fundamental importance in a number of physical, chemical and biological processes. However, there is a lack of experimental methods that can obtain information on the structure and orientation of the molecules as they pass through the pore, and their interactions with the pore during passage. Imaging with a transmission electron microscope is a powerful method for studying structural changes in single molecules as they move and for imaging molecules confined inside carbon nanotubes. Here, we report that such imaging can be used to observe the structure and orientation of a hydrocarbon chain as it passes through nanoscale defects in the walls of a single-walled carbon nanotube to the vacuum outside, and also to study the interactions between the chain and the nanopore. Based on experiments at 293 K and 4 K we conclude that the major energy source for the molecular motions observed at 4 K is the electron beam used for the imaging.     

Direct electrical measurements on single-molecule genomic DNA using single-walled carbon nanotubes

A unique nanoelectronic platform, based on single-walled carbon nanotubes (SWNTs), has been fabricated for measuring electrical transport in single-molecule DNA. We have tested 80 base pairs of single- and double-stranded DNA (ssDNA and dsDNA, respectively) of complex base sequences. About a 25-40 pA current (at 1 V) was measured for the dsDNA molecule covalently attached to the SWNT electrode at its termini. In the absence of base pair stacking, a ssDNA carries a feeble current of approximately 1 pA or less. Gate-voltage-dependent I-V characteristics revealed that the bridging dsDNA molecule acts as a p-type channel between SWNT source and drain electrodes.     

Synthesis of peapods using substrate-grown SWNTs and DWNTs: an enabling step toward peapod devices

We report the successful synthesis of nanoscale peapods from single-walled and double-walled nanotubes grown by chemical vapor deposition (CVD) on substrates with windows etched into free-standing silicon nitride membranes. CVD-grown nanotubes were oxidized in air, then filled with C(60) molecules from the vapor phase. Observed variation in nanotube oxidation and C(60) packing with nanotube diameter agreed with theoretical expectations. Windowed samples provide several important advantages for property measurements of peapods and other nanomaterials. Individual nanostructures can be followed through processing steps, and a single nanostructure can be inspected by high-resolution TEM and subsequently contacted with nanoscale electrodes using electron beam lithography.     

Current Trends in Shrinking the Channel Length of Organic Transistors Down to the Nanoscale

In this Review article, we highlighted current trends in shrinking the channel length of organic field effect transistors (OFETs) down to the nanoscale in three systems where sophisticated device fabrication has been integrated into the development of different electrodes with nanoscale gaps. The design principle is the combination of molecular design freedom and flexible molecular self‐assembly with state‐of‐the‐art device fabrication to realize organic field effect nano‐transistors where molecular materials themselves behave as pivotal elements. Three different types of nanoscale electrodes are used for OFETs: metals, single‐walled carbon nanotubes (SWCNTs), and graphenes. These electrodes are made by e‐beam lithography as well as other complementary methods (shadow deposition, underetching, nanoimprinting, rubber stamping, and microcontact printing).     

Theory of High Bias Coulomb Blockade in Ultrashort Molecules

We point out that single electron charging effects such as coulomb blockade (CB) and high-bias staircases play a crucial role in transport through single ultrashort molecules. A treatment of CB through a prototypical molecule, benzene, is developed using a master-equation in its complete many-electron Fock space, evaluated through exact diagonalization or full configuration interaction (CI). This approach can explain a whole class of nontrivial experimental features including vanishing zero bias conductances, sharp current onsets followed by ohmic current rises, and gateable current levels and conductance structures, most of which cannot be captured even qualitatively within the traditional self-consistent field (SCF) approach coupled with perturbative transport theories. By comparing the two approaches, namely SCF and CB, in the limit of weak coupling to the electrode, we establish that the inclusion of strong correlations within the molecule becomes critical in addressing the above experiments. Our approach includes on-bridge correlations fully, and is therefore well-suited for describing transport through short molecules in the limit of weak coupling to electrodes.     

Photocurrent imaging of charge transport barriers in carbon nanotube devices

The realization of high-performance electrical devices incorporating single-wall carbon nanotubes critically depends on the minimization of charge transport barriers in the tubes and at the contacts. Herein we demonstrate photocurrent imaging as a fast and effective tool to locate such barriers within individual metallic nanotubes contacted by metal electrodes. The locally induced photocurrents directly reflect the existence of built-in electric fields associated with the presence of depletion layers at the contacts or structural defects along the tubes.     

Transistor-like behavior of transition metal complexes

Electron transport through semiconductor and metallic nanoscale structures, molecular monolayers, and single molecules connected to external electrodes display rectification, switch, and staircase functionality of potential importance in future miniaturization of electronic devices. Common to most reported systems is, however, ultrahigh vacuum and/or cryogenic working conditions. Here we introduce a single-molecule device concept based on a class of robust redox active transition metal (Os(II)/(III)) complexes inserted between the working electrode and tip in an electrochemical scanning tunneling microscope (in situ STM). This configuration resembles a single-molecule transistor, where the reference electrode corresponds to the gate electrode. It operates at room temperature in a condensed matter (here aqueous) environment. Amplification on-off ratios up to 50 are found when the redox level is brought into the energy window between the Fermi levels of the electrodes by the overpotential ("gate voltage"). The current-voltage characteristics for two Os(II)/(III) complexes have been characterized systematically and supported by theoretical frames based on molecular charge transport theory.     

Carbon nanotubes as electrodes for dielectrophoresis of DNA

Dielectrophoresis can potentially be used as an efficient trapping tool in the fabrication of molecular devices. For nanoscale objects, however, the Brownian motion poses a challenge. We show that the use of carbon nanotube electrodes makes it possible to apply relatively low trapping voltages and still achieve high enough field gradients for trapping nanoscale objects, e.g., single molecules. We compare the efficiency and other characteristics of dielectrophoresis between carbon nanotube electrodes and lithographically fabricated metallic electrodes, in the case of trapping nanoscale DNA molecules. The results are analyzed using finite element method simulations and reveal information about the frequency-dependent polarizability of DNA.     

Batch fabrication of carbon nanotube bearings

Relative displacements between the atomically smooth, nested shells in multiwalled carbon nanotubes (MWNTs) can be used as a robust nanoscale motion enabling mechanism. Here, we report on a novel method suited for structuring large arrays of MWNTs into such nanobearings in a parallel fashion. By creating MWNT nanostructures with nearly identical electrical circuit resistance and heat transport conditions, uniform Joule heating across the array is used to simultaneously engineer the shell geometry via electric breakdown. The biasing approach used optimizes process metrics such as yield and cycle-time. We also present the parallel and piecewise shell engineering at different segments of a single nanotube to construct multiple, but independent, high density bearings. We anticipate this method for constructing electromechanical building blocks to be a fundamental unit process for manufacturing future nanoelectromechanical systems (NEMS) with sophisticated architectures and to drive several nanoscale transduction applications such as GHz-oscillators, shuttles, memories, syringes and actuators.     

Single molecule electronic devices

Single molecule electronic devices in which individual molecules are utilized as active electronic components constitute a promising approach for the ultimate miniaturization and integration of electronic devices in nanotechnology through the bottom-up strategy. Thus, the ability to understand, control, and exploit charge transport at the level of single molecules has become a long-standing desire of scientists and engineers from different disciplines for various potential device applications. Indeed, a study on charge transport through single molecules attached to metallic electrodes is a very challenging task, but rapid advances have been made in recent years. This review article focuses on experimental aspects of electronic devices made with single molecules, with a primary focus on the characterization and manipulation of charge transport in this regime.     

Transport comparison of multiwall carbon nanotubes by contacting outer shell and all shells

Carbon nanotubes, particularly multiwall carbon nanotubes (MWCNTs) can serve as interconnects in nanoelectronic devices and integrated circuits because of their extremely large current-carrying capacity. Many experimental results about the transport properties of individual MWCNTs by contacting outer shell or all shells have been reported. In this work, a compatible method with integrated circuit manufacturing process was presented to compare the transport property of an individual multiwall carbon nanotube (MWCNT) by contacting outer shell only and all shells successively. First of the Ti/Au electrodes contacting outer shell only were fabricated onto the nanotube through the sequence of electron beam lithography (EBL) patterning, metal deposition and lift-off process. After the characterization of its transport property, focused ion beam (FIB) was used to drill holes through the same nanotube at the as-deposited electrodes. Then new contact to the holes and electrodes were made by ion-induced deposition of tungsten from W(CO)6 precursor gas. The transport results indicated that the new contact to all shells can clear up the intershell resistance and the electrical conductance of the tube can be improved about 8 times compared to that of by contacting outer shell only.     

Metal-free silicon-molecule-nanotube testbed and memory device

Work from several laboratories has shown that metal nanofilaments cause problems in some molecular electronics testbeds. A new testbed for exploring the electrical properties of single molecules has been developed to eliminate the possibility of metal nanofilament formation and to ensure that molecular effects are measured. This metal-free system uses single-crystal silicon and single-walled carbon nanotubes as electrodes for the molecular monolayer. A direct Si-arylcarbon grafting method is used. Use of this structure with pi-conjugated organic molecules resulted in a hysteresis loop with current-voltage measurements that are useful for an electronic memory device. The memory is non-volatile for more than 3 days, non-destructive for more than 1,000 reading operations and capable of more than 1,000 write-erase cycles before device breakdown. Devices without pi-conjugated molecules (Si-H surface only) or with long-chain alkyl-bearing molecules produced no hysteresis, indicating that the observed memory effect is molecularly relevant.     

Single‐Molecule Devices: Single Molecule Electronic Devices (Adv. Mater. 14/2011)

Single molecule electronic devices in which individual molecules are utilized as active electronic components constitute a promising approach for the ultimate miniaturization and integration of electronic devices in nanotechnology through the bottom‐up strategy. Thus, the ability to understand, control, and exploit charge transport at the level of single molecules has become a long‐standing desire of scientists and engineers from different disciplines for various potential device applications. Indeed, a study on charge transport through single molecules attached to metallic electrodes is a very challenging task, but rapid advances have been made in recent years. This review article focuses on experimental aspects of electronic devices made with single molecules, with a primary focus on the characterization and manipulation of charge transport in this regime.     

Charging of molecules during transport

The possibility that a single molecule can acquire charge during steady-state transport is an open issue. We report first-principles calculations in a range of configurations of certain molecules and conclude the following. When a molecule is strongly coupled to the electrodes, charging is not sustainable. On the other hand, by using variable-length tunnel barriers (insulating tethers) one can enable and control charging. In particular, by using different combinations of "tethers", we demonstrate the possibility of charging by a single electron, sustainable over a wide bias range, and also the possibility of continuous linear charging when a gate voltage is applied.     

Chemoselective nanowire fuses: chemically induced cleavage and electrical detection of carbon nanofiber bridges

A new type of nanoscale bioswitch based on the electrical detection of chemically induced cleavage of chemical bonds, which bind individual nanowires across a pair of electrodes is demonstrated. Carbon nanofibers are manipulated using dielectrophoresis to form single-nanowire bridges across microelectrode junctions, and are anchored through a biomolecular interaction. Once in place, chemically induced cleavage of a recognition site along the bonds linking the nanowire to the electrodes allows the nanowire to be easily removed by a flow of fluid; this removal can be detected in real time via changes in the AC electrical response. This form of sensing is inherently digital in nature as the removal of a single nanowire produces a sudden decrease in the current between electrodes and is essentially a chemoselective fuse. These results suggest that this sensing principle could be a general method for digital chemical and/or biological sensing using individual nanowires.     

Cleaved-edge-overgrowth nanogap electrodes

We present a method to fabricate multiple metal nanogap electrodes of tailored width and distance in parallel, on the cleaved plane of a GaAs/AlGaAs heterostructure. The three-dimensional patterned structures are obtained by a combination of molecular-beam-epitaxial regrowth on a crystal facet, using the cleaved-edge-overgrowth (CEO) method, and subsequent wet selective etching and metallization steps. SEM and AFM studies reveal smooth and co-planar electrodes of width and distance of the order of 10 nm. Preliminary electrical characterization indicates electrical gap insulation in the 100 MΩ range with kΩ lead resistance. We propose our methodology to realize multiple electrode geometries that would allow investigation of the electrical conductivity of complex nanoscale objects such as branched organic molecules.