Synthesis and X-ray crystal structure determination of monomeric cis-Pd(2,2′-bipyridine)(NO3)2

Complex cis-Pd(2,2′-bipyridine)(NO₃)₂ was synthesized by the reaction of cis-Pd(2,2′-bipyridine)Cl₂ with AgNO₃ in water and crystallized by vapor diffusion of diethyl ether into an acetonitrile solution of the complex. The crystal structure obtained shows that each of the two nitrate ligands are coordinated through oxygen atoms to the Pd(2,2′-bipyridine)²⁺ center in unidentate fashion. IR and ¹H NMR spectral data were also obtained.     

Synthesis and structural characterization of two novel 2D coordination polymers [PbCl(atza)]n and [PbCl(a4-ptz)]n

Reactions of Katza (atza⁻ = 5-aminotetrazole-1-acetato) or Ka4-ptz (a4-ptz⁻ = 5-[N-acetato(4-pyridyl)]tetrazole) with PbCl₂in aqueous solution, produced two new Pb(II) compounds, [PbCl(atza)]_n (1) and [PbCl(a4-ptz)]_n (2). Both compounds were structurally characterized by elemental analysis, IR spectroscopy and single-crystal X-ray diffraction. In 1 or 2, the Pb(II) centers are connected through the atza⁻ or a4-ptz⁻ bridging ligand to form a two-dimensional layered structure. The luminescence properties of 1 and 2 were investigated at room temperature in the solid state.     

The first P–N containing RuCl3NO complex: fac-[RuCl3(NO)(P–N)] (P–N = [o-(N,N-dimethylamino)phenyl]diphenylphosphine)

Complex fac-[RuCl₃(NO)(P–N)] was synthesized from [RuCl₃(H₂O)₂(NO)] in methanol solution under reflux. The orange solid obtained was characterized by NMR (³¹P{¹H}, ¹H, ¹³C) and, cyclic voltammetry, ESI-MS, IR, elemental analysis and X-ray diffraction structure determination. The ³¹P{¹H} reveals the presence of singlet at 36 ppm. IR N–O stretching as KBr pellets or CH₂Cl₂ solution presented 1866 cm⁻¹ and 1872 cm⁻¹, respectively.     

Diplatinum(III) [Cl2(μ2-amidinate)4] compound derived from air oxidation of mononuclear cis-[Pt(NH3)2(amidine-κ)2] complex

The dinuclear platinum(III) complex [Pt₂Cl₂{μ₂-N(H)C(Et)N(H)}₄] (2) has been prepared by heating cis-[Pt(NH₃)₂{NHC(NH₂)Et}₂](Cl)₂ (cis-1) under aeration conditions in an EtOH/H₂O mixture at 70 °C for 2 d and it was characterized by elemental analyses (C, H, N), ESI⁺-MS, IR, ¹H and ¹³C NMR spectroscopies and also by X-ray diffraction. Complex 2 represents the second Pt^III dimer stabilized by the amidinate ligand ever known and it has a lantern-type structure with four amidinate ligands bridging two Pt^III centers with Pt–Pt distance of 2.4809(2) Å.     

Synthesis, characterization and crystal structure of cis,mer-[ReH(CO)2{PPh(OMe)2}3]

The dicarbonylhydride complex cis,mer-[ReH(CO)₂{PPh(OMe)₂}₃] (1) was serendipitously obtained when, in an attempt to replace a CO ligand by the phosphonite ligand PPh(OMe)₂ in [ReH(CO)₃(L)] (L = PPh₂OCH₂CH₂OPPh₂), this complex was treated with PPh(OMe)₂ under UV irradiation. The complex 1 was characterized by IR, ¹H and ³¹P{¹H} NMR spectroscopy and by crystal structure determination. The spectroscopic features are consequent with the cis,mer configuration showed by the X-ray crystallographic analysis of the complex. The environment of the metal centre is a distorted octahedron.     

Bis(4′-phenyl-2,2′:6′,2″-terpyridine)ruthenium(II): Holding the {Ru(tpy)2} embraces at bay

The solid state structure of [Ru(Phtpy)₂][PF₆]₂ · 4MeCN has been determined (Phtpy = 4′-phenyl-2,2′:6′,2″-terpyridine); [Ru(Phtpy)₂]²⁺ cations pack into sheets by virtue of {M(tpy)₂}₂ embraces, and the MeCN solvent molecules are involved in NH–C interactions which prevent the efficient packing of adjacent sheets. Comparisons with related structures lead to some generalizations about packing motifs in salts containing [M(Phtpy)₂]²⁺ or [M(pytpy)₂]²⁺ cations (pytpy = 4′-pyridyl-2,2′:6′,2″-terpyridine).     

The RuCl3(dppb)H2O complex: A new metal-assisted oxidative dehydrogenation of the o-phenylenediamine ligand

The trans-[RuCl₂(dppb)(bqdi)] and trans-[RuCl₂(dppb)(opda)] complexes (dppb = 1,4-bis(diphenylphosphine)butane, bqdi = o-benzoquinonediimine, and opda = o-phenylenediamine) were synthesized from the reaction of the mer-[RuCl₃(dppb)(H₂O)] aqua-complex with the opda ligand. The X-ray structural and electrochemical characterizations of the isolated compounds showed that this aqua-complex induces the oxidative dehydrogenation of the amine species (opda) to the imine form (bqdi) of the o-phenylene ligand during the synthetic procedure. In the presence of oxygen, the ³¹P{¹H} NMR experiments confirmed that the trans-[RuCl₂(dppb)(bqdi)] complex is the only product formed.     

Ditopic, flexible hydrazone-based building blocks with pendant 2,2′:6′,2′′-terpyridine metal-binding domains

The synthesis and characterization of three new bis(2,2′:6′,2′-terpyridine) (tpy) ligands containing different hydrazone spacers between the metal-binding domains are described. Treatment of 1,4-benzenedicarbaldehyde bis(2,2′:6′,2′′-terpyridin-4′-ylhydrazone) (1) with [(tpy)RuCl₃] in the presence of N-ethylmorpholine results in the formation of [(tpy)Ru(μ-1)Ru(tpy)]⁴⁺. Single crystal X-ray diffraction data for [(tpy)Ru(μ-1)Ru(tpy)][PF₆]₄·8MeCN confirm the ability of the hydrazone-based ligand to bridge two ruthenium(II) centres, providing proof-of-principle for the application of this class of flexible ligand in the design of coordination polymers.     

Electrochemical properties of palladium(II) trans- and cis-diglycinate complexes

The kinetics of trans–cis-isomerization of palladium(II) diglycinate complexes have been studied by the spectrophotometric and potentiometric methods. The reaction of transition of trans-[Pd(Gly)₂] to cis-[Pd(Gly)₂] is described by a first-order equation. The half-life of the trans-isomer [Pd(Gly)₂] and the rate constant of the reaction of its transition to cis-isomeric structure have been determined. A mechanism of transformation of trans-[Pd(Gly)₂] into cis-[Pd(Gly)₂] is proposed. The spectral characteristics and electrochemical parameters of palladium(II) trans- and cis-diglycinate complexes have been determined. The mechanism of electroreduction of palladium(II) from glycinate electrolyte containing no excess free ligand has been elucidated.     

Solvothermal synthesis of a novel mixed valence Cu(I)/Cu(II) complex containing sulphate, malate and 4,4-bipyridine, [CuCu2(mal)(SO4)(bpy)2 · H2O]n. Unique binding mode of the malate anion

The reaction of CuSO₄ · 5H₂O with 4,4^′-bipyridine and malic acid at 140 °C under solvothermal conditions afforded a mixed valence three-dimensional coordination polymer [Cu^ICu^II₂(mal)(SO₄)(bpy)₂ · H₂O]_n, (1). The building unit consists of a Cu²⁺-dimer in which copper centers are bridged by malate and sulphate anions. SO₄²⁻ anion further connects dimeric unit with the Cu¹⁺ center. Building units are linked by 4,4^′-bipyridine ligands to form double chains, that are interconnected into 3D network through additional sulphate bridge.     

Self-assembly of organometallic Pd(II) complexes via CH3π interactions: The first example of a cyclopalladated compound with herringbone stacking pattern

Two binuclear cyclometallated compounds [Pd(C²,N-dmba)(μ-N₃)]₂ (1) and [Pd₂(C²,N-dmba)₂(μ-N₃)(μ-Cl)] (2) (dmba = N,N-dimethylbenzylamine) have been synthesized and characterized by elemental analysis, IR and NMR spectroscopies and single crystal X-ray diffraction crystallography. The ability of CH₃ groups to form C(sp³)Hπ hydrogen bonds with phenyl rings is responsible for the molecular self-assembly within the crystals of 1 and 2. Compound 1 crystallizes as one-dimensional supramolecular chains whereas the crystal packing of 2 consists of a herringbone of sandwiches composed by two inversely related [Pd₂(C²,N-dmba)₂(μ-N₃)(μ-Cl)] molecules.     

Novel Hg and Mn supramolecular complexes with a versatile building block 5-(4-pyridyl)-1,3,4-oxadiazole-2-thiolate involving in situ ligand formation

Reaction of potassium N′-(pyridine-4-carbonyl)-hydrazinecarbodithioate ([K⁺(H₂L)⁻]) with Hg^II or Mn^II inorganic salt in the presence of 1,10-phenanthroline (phen) or 4,4′-bipyridine (bipy), yields complexes [Hg(pyt)₂(phen)] (1) and {[Mn(pyt)₂(H₂O)₂]·(bipy)·(H₂O)₂}_n (2), in which the pyt ligand (Hpyt = 5-(4-pyridyl)-1,3,4-oxadiazole-2-thiol) is obtained by in situ ligand formation from the acyclic precursor [K⁺(H₂L)⁻]. Single crystal X-ray diffraction suggests that the pyt anionic ligands in 1 and 2 behave as thiolate and thione isomers, respectively, and display S- and μ-N_pyridyl, N_oxadiazole-binding fashions. Complex 1 shows a 1-D fishbone-like supramolecular array via strong aromatic stacking interactions between the discrete mononuclear coordination motifs, whereas 2 has a 2-D layered host coordination framework with the inclusion of bipy and water guests in the cavities.     

Synthesis, crystal structure and magnetic properties of a new three-dimensional porous framework: [Gd2(BDA)3(DMF)2(H2O)4] · 2DMF

The open framework compound of [Gd₂(BDA)₃(DMF)₂(H₂O)₄] · 2DMF (1), prepared by heating GdCl₃ with 2,2′-bipyridyl-4,4′-dicarboxylatic acid (BDA) in mixed solvent, is constructed from BDA linking up polymeric [GdO₅(DMF)(H₂O)₂]_n tethers. The 1D channels are filled with coordinated and uncoordinated DMF molecules hydrogen bonding to terminal aqua ligands. The study of the temperature dependent magnetic susceptibilities revealed that there are ferromagnetic interactions between intra-chain Gd^III atoms and weak antiferromagnetic interactions between inter-chain Gd^III atoms.     

Ferromagnetic mixed tribridged dinuclear copper(II) complex [Cu2(OAc)2(OH)(dpa)2]PF6 · H2O (dpa = 2,2′-dipyridylamine): 3D superstructure based on hydrogen bond and π…π interaction

A new dinuclear complex [Cu₂(OAc)₂(OH)(dpa)₂] PF₆ · H₂O (1) is prepared and structurally and magneto-structurally characterized. The monocationic core contains one acetate in familiar bidentate η¹:η¹:μ₂-bridge and another in the rare monoatomic bridge along with one hydroxo intermediary. 1 packs through N–H…O and O–H…O hydrogen bonds and π…π interaction resulting a 3D supramolecular continuum and displays high-energy intraligand ¹(π − π^*) fluorescence and intraligand ³(π − π^*) phosphorescence in glassy solution.     

Preparation, crystal structure and properties of two novel metal-organic frameworks assembled from pyridine-3,5-dicarboxylic acid N-oxide

Two novel coordination polymers, [Cu(PDCO) · (H₂O)]_n (1) and [Cd(PDCO)(bipy) · (H₂O) · 5H₂O]_n (2), (H₂PDCO = pyridine-3,5-dicarboxylic acid N-oxide, bipy = 4,4′-bipyridine), have been synthesized under hydrothermal conditions, and their structures were determined by single-crystal X-ray diffraction studies. Polymer 1 features a three-dimensional (3D) network with nonequivalent nodes of (6³)₂(6⁹ · 8⁵ · 10) topology. Polymer 2 exhibits one-dimensional (1D) double-stranded chains. The magnetic character of 1 as well as the gas adsorption and luminescent properties of 2 have been investigated.     

Synthesis and characterisation of tetraosmium carbonyl clusters bearing an azo type ligand: crystal and molecular structures of [Os4(μ-H)4(CO)11(NC5H4N=NPh)] and [Os4(μ-H)4(CO)10(MeCN)(NC5H4N=NPh)]

Reaction of [Os₄(μ-H)₄(CO)₁₀(MeCN)₂] with one equivalent of 4-phenylazopyridine (4-PAP) in CH₂Cl₂ at ambient conditions afforded two new tetraosmium clusters [Os₄(μ-H)₄(CO)₁₁(NC₅H₄N=NPh)] (1) and [Os₄(μ-H)₄(CO)₁₀(MeCN)(NC₅H₄N=NPh)] (2) in moderate yields. Compound 1 exists as a pair of isomers in solution, which differ in the location of the bridging hydride ligands. The molecular structures of clusters 1 and 2 consist of a highly distorted tetrahedral metal skeleton, with the azo ligand terminally bonded to an osmium atom.     

Diaquabis(4,4-bipyridine)copper(II) di(o-sulfobenzimidate) dichloromethane solvate, a two-dimensional Cu4(4,4-C5H4NC5H4N)4 rhombic grid clathrating guest dichloromethane

In the crystal structure of bis(4,4^′-bipyridine)diaquacopper(II) di(o-sulfobenzimidate) dichloromethane solvate, the host polycationic [Cu(4,4^′-C₅H₄NC₅H₄N)₂(H₂O)₂]_∞ rhombic grids stack over each other 8.16 Å apart along the c-axis of the orthorhombic Pbcn unit cell. The Cu₄(4,4^′-bpy)₄ rhombus clathrating a disordered dichloromethane molecule has a copper atom at the corner and the spacer heterocycle with pyridyl rings twisted by 21.8(2)°, as its side. The anions occupy the space between the layers; the grids interact with each other indirectly through water–anion hydrogen bonds [OO=2.766(4); ]. The structure sets a remarkable example of potentials born by the polyfunctional o-sulfobenzimidate moiety for construction of unusual architectures.     

Two novel Zn(II) coordination polymers based on trigonal ligand: 4′-(4-pyridyl)-3,2′:6′,3″-terpyridine

Two novel Zn(II) coordination polymers, [Zn₅(pytpy)₈(fum)₄(H₂O)₄(OH)₂]_n · n(CH₃OH) · 2n(H₂O) (1) and [Zn₃(pytpy)₄ (btc)₂]_n · 2n(H₂O) (2) (pytpy = 4′-(4-pyridyl)-3,2′:6′,3″-terpyridine, H₂fum = fumaric acid, H₃btc = 1,3,5-benzenetricarboxylic acid) have been hydrothermally synthesized and structurally characterized. Complex 1 is a 2D layer structure, which is constructed from linear pentanuclear Zn(II) subunits interconnected via bidentate-bridging pytpy ligands and tridentate-bridging fum²⁻ anions. Complex 2 is a 3D network structure, μ₂-pytpy ligands link the layers based on the heart-like hexanuclear subunits to form the 3D network. Both complexes show strong fluorescence emission upon excitation at 310 nm in solid state. Additionally, these two complexes possess great thermal stabilities, especially for 2, the framework is stable up to 350 °C.     

Preparation and electrochemical performance studies on Cr-doped Li3V2(PO4)3 as cathode materials for lithium-ion batteries

Cr-doped Li₃V_2−xCr_x(PO₄)₃/C (x = 0, 0.05, 0.1, 0.2, 0.5, 1) compounds have been prepared using sol–gel method. The Rietveld refinement results indicate that single-phase Li₃V_2−xCr_x(PO₄)₃/C with monoclinic structure can be obtained. Although the initial specific capacity decreased with Cr content at a lower current rate, both cycle performance and rate capability have excited improvement with moderate Cr-doping content in Li₃V_2−xCr_x(PO₄)₃/C. Li₃V_1.9Cr_0.1(PO₄)₃/C compound presents an initial capacity of 171.4 mAh g⁻¹ and 78.6% capacity retention after 100 cycles at 0.2C rate. At 4C rate, the Li₃V_1.9Cr_0.1(PO₄)₃/C can give an initial capacity of 130.2 mAh g⁻¹ and 10.8% capacity loss after 100 cycles where the Li₃V₂(PO₄)₃/C presents the initial capacity of 127.4 mAh g⁻¹ and capacity loss of 14.9%. Enhanced rate and cyclic capability may be attributed to the optimizing particle size, carbon coating quality, and structural stability during the proper amount of Cr-doping (x = 0.1) in V sites.     

A new binuclear potassium (І) complex with a novel 1D infinite water chain containing (H2O)12 clusters

A novel 1D infinite water chain made of (H₂O)₁₂ clusters containing two different chair water hexamers is found in the binuclear coordination compound, [K₂(L)₂(phen)₄]·6H₂O (1) (where L = 2,2′-azanediyldibenzoic dianion, phen = 1,10′-phenanthroline), which has been synthesized and structurally characterized by single-crystal X-ray diffraction. The fluorescence spectrum and thermogravimetric analysis (TGA) of the title complex 1 have been also discussed.