Heat transfer in rectangular microchannels heat sink using nanofluids

The effect of using nanofluids on heat transfer and fluid flow characteristics in rectangular shaped microchannel heat sink (MCHS) is numerically investigated for Reynolds number range of 100–1000. In this study, the MCHS performance using alumina–water (Al₂O₃-H₂O) nanofluid with volume fraction ranged from 1% to 5% was used as a coolant is examined. The three-dimensional steady, laminar flow and heat transfer governing equations are solved using finite volume method. The MCHS performance is evaluated in terms of temperature profile, heat transfer coefficient, pressure drop, friction factor, wall shear stress and thermal resistance. The results reveal that when the volume fraction of nanoparticles is increased under the extreme heat flux, both the heat transfer coefficient and wall shear stress are increased while the thermal resistance of the MCHS is decreased. However, nanofluid with volume fraction of 5% could not be able to enhance the heat transfer or performing almost the same result as pure water. Therefore, the presence of nanoparticles could enhance the cooling of MCHS under the extreme heat flux conditions with the optimum value of nanoparticles. Only a slight increase in the pressure drop across the MCHS is found compared with the pure water-cooled MCHS.     

The effect of geometrical parameters on heat transfer characteristics of microchannels heat sink with different shapes

The effect of geometrical parameters on water flow and heat transfer characteristics in microchannels is numerically investigated for Reynolds number range of 100–1000. The three-dimensional steady, laminar flow and heat transfer governing equations are solved using finite volume method. The computational domain is taken as the entire heat sink including the inlet/outlet ports, wall plenums, and microchannels. Three different shapes of microchannel heat sinks are investigated in this study which are rectangular, trapezoidal, and triangular. The water flow field and heat transfer phenomena inside each shape of heated microchannels are examined with three different geometrical dimensions. Using the averaged fluid temperature and heat transfer coefficient in each shape of the heat sink to quantify the fluid flow and temperature distributions, it is found that better uniformities in heat transfer coefficient and temperature can be obtained in heat sinks having the smallest hydraulic diameter. It is also inferred that the heat sink having the smallest hydraulic diameter has better performance in terms of pressure drop and friction factor among other heat sinks studied.     

Thermal performance of optimized interrupted microchannel heat sink (IMCHS) using nanofluids

An interrupted microchannel heat sink (IMCHS) using nanofluids as working fluids is analyzed numerically to increase the heat transfer rate. The rectangular IMCHS is designed with length and width of 10 mm and 0.057 mm respectively while optimum cut section number, n_c = 3. The three dimensional governing equations (continuity, momentum and energy) were solved using finite volume method (FVM). Parametric study of thermal performance between pure water-cooled and nanofluid-cooled IMCHS are evaluated for particle diameter in the range of, 30 nm to 60 nm, volume fraction in the range of, 1% to 4%,nanofluid type of Al₂O₃, CuO, and SiO₂ at Reynolds number range of 140 to 1034 are examined. The effects of the transport properties, nanofluid type, nanoparticle volume fraction and particle diameter are investigated on the IMCHS performance. It is inferred that the Nu number for IMCHS is higher than the conventional MCHS with a slight increase of the pressure drop. It is found that highest thermal augmentation is predicted for Al₂O₃, followed by CuO, and finally for SiO₂ in terms of Nu_nf/Nu_pw in the IMCHS. The Nu number increased with the increase of nanoparticle volume fraction and with the decrease of nanoparticle diameter.     

Thermal and hydraulic characteristics of nanofluid flow in a helically coiled tube heat exchanger

The effects of using different geometrical parameters with the combination of nanofluid on heat transfer and fluid flow characteristics in a helically coiled tube heat exchanger (HCTHE) are numerically investigated. A CuO nanoparticle with a diameter of 25 nm dispersed in water with a particle concentration of 4% was used as the working fluid. The three dimensional governing equations (continuity, momentum and energy) along with the boundary conditions are solved using the finite volume method (FVM). The mass flow rate of water in the annulus was kept constant and the nanofluid flow rate in the inner tube was varied. The effect of flow configuration (parallel and counter) was also examined in this study. The performance of the HCTHE was evaluated in terms of Nusselt number, heat transfer rate, pressure drop, effectiveness and performance index. The results reveal that certain geometrical parameters such as the helix radius and inner tube diameter do affect the performance of the HCTHE under laminar flow conditions. It is also found that counter-flow configuration produced better results as compared to parallel-flow configuration.     

Three-dimensional numerical simulation of heat and fluid flow in noncircular microchannel heat sinks

A three-dimensional model of heat transfer and fluid flow in noncircular microchannel heat sinks is developed and analyzed numerically. It is found that Nusselt number has a much higher value at the inlet region, but quickly approaches the constant fully developed value. The temperature in both solid and fluid increases along the flow direction. In addition, the comparison of thermal efficiencies is conducted among triangular, rectangular and trapezoidal microchannels. The result indicates that the triangular microchannel has the highest thermal efficiency.     

复合热沉环路热管的热点散热性能模拟研究

针对芯片功耗与集成度提高而导致的局部热点问题,设计了一种用于芯片散热的复合热沉环路热管系统。建立了环路热管蒸发段模型,通过数值模拟的方法,证明了复合热沉环路热管系统能够降低热点温度,提高散热表面的温度均匀程度,且散热效果与热点的分布位置有关。当热点的热流密度为160W/cm2,热沉横向、纵向导热率分别为1500W/(m?K)、24W/(m?K)时,热点温度为88.88°C,相比于无热沉时降低了5.96°C。研究了不同热沉导热率下的热沉厚度对热点温度的影响,结果表明：若导热率各项同性,热点温度随热沉厚度的增加而降低,之后趋向不变;若为各项异性,存在最优的热沉厚度,使热点温度最低。     

Cooling performance of a microchannel heat sink with nanofluids

In this paper, the cooling performance of a microchannel heat sink with nanoparticle–fluid suspensions (“nanofluids”) is numerically investigated. By using a theoretical model of thermal conductivity of nanofluids that accounts for the fundamental role of Brownian motion, we investigate the temperature contours and thermal resistance of a microchannel heat sink with nanofluids such as 6 nm copper-in-water and 2 nm diamond-in-water. The results show that the cooling performance of a microchannel heat sink with water-based nanofluids containing diamond (1 vol.%, 2 nm) at the fixed pumping power of 2.25 W is enhanced by about 10% compared with that of a microchannel heat sink with water. Nanofluids reduce both the thermal resistance and the temperature difference between the heated microchannel wall and the coolant. Finally, the potential of deploying a combined microchannel heat sink with nanofluids as the next generation cooling devices for removing ultra-high heat flux is shown.     

3D numerical optimization of a heat sink base for electronics cooling

In this paper, the possible optimal thickness of a heat sink base has been explored numerically with different convective heat transfer boundary conditions in a dimensionless three dimensional heat transfer model. From the numerical results, relations among different heat transfer mechanisms (natural or forced, air or liquid), different area ratios of a heat sink to a heating source, and the lowest thermal resistance have been obtained and discussed. Also a simple correlation for these three parameters from data fitting is given for guiding a heat sink design.     

Experimental study on the heat transfer enhancement of MWNT-water nanofluid in a shell and tube heat exchanger

Heat transfer enhancement of multi-walled carbon natube(MWNT)/water nanofluid in a horizontal shell and tube heat exchanger has been studied experimentally. Carbon nanotubes were synthesized by the use of catalytic chemical vapor deposition (CCVD) method over Co–Mo/MgO nanocatalyst. Obtained MWNTs were purified using a three stage method. COOH functional groups were inserted for making the nanotubes hydrophilic and increasing the stability of the nanofluid. The results indicate that heat transfer enhances in the presence of multi-walled nanotubes in comparison with the base fluid.     

Numerical simulation of heat transfer enhancement in wavy microchannel heat sink

In this paper, heat transfer and water flow characteristics in wavy microchannel heat sink (WMCHS) with rectangular cross-section with various wavy amplitudes ranged from 125 to 500 μm is numerically investigated. This investigation covers Reynolds number in the range of 100 to 1000. The three-dimensional steady, laminar flow and heat transfer governing equations are solved using the finite-volume method (FVM). The water flow field and heat transfer phenomena inside the heated wavy microchannels is simulated and the results are compared with the straight microchannels. The effect of using a wavy flow channel on the MCHS thermal performance, the pressure drop, the friction factor, and wall shear stress is reported in this article. It is found that the heat transfer performance of the wavy microchannels is much better than the straight microchannels with the same cross-section. The pressure drop penalty of the wavy microchannels is much smaller than the heat transfer enhancement achievement. Both friction factor and wall shear stress are increased proportionally as the amplitude of wavy microchannels increased.     

Thermohydraulic and entropy characteristics of Al2O3-water nanofluid in a ribbed interrupted microchannel heat exchanger

In this study, an interrupted microchannel heat sink with rib turbulators was studied for its thermohydraulic effectiveness and entropy generation in a compact space. The rib edges are modified to enhance the overall functioning of the system by reducing the pressure drop. The working fluid used was Al₂O₃-water nanofluid, and increasing the Reynolds number and nanoparticle concentration triggered a reduction in the heat sink's maximum temperature. These also offer a decrease in resistance to heat transfer, and there is an improvement in the evenness of the temperature of the interrupted microchannel heat sink, as regions with the likelihood of hot spot reduced drastically. At Re = 100, increasing the nanoparticle concentration from 0% to 4% enhanced the heat transfer coefficient by 38.41% for the interrupted microchannel heat sink-base (IMCH-B) configuration. Under similar conditions, the convective heat transfer coefficient for the interrupted microchannel heat sink-fillet (IMCH-F) increased by 43.69%. Furthermore, at 0.5% concentration, changing the Reynolds number from 100 to 700 augmented the heat transfer coefficient by 70.65%. Thus, the maximum temperature of the substrate's bottom surface was reduced by 53.83°C when the system was operated at Re = 700 and nanoparticle concentration of 4%. The IMCH-C also showed relatively close results at all observed volume fractions. For the IMCH-C, the maximum temperature of the bottom surface was reduced by 41.98°C at Re = 700 when compared with Re = 100% and 4% concentration. Although at high Reynolds numbers and concentrations, the pressure drops are higher, the performance enhancement criteria prove that the nanofluid is superior to water and the edge modifications show significant performance improvement. More importantly, the IMCH-F heat sink showed the optimum performance based on the performance evaluation criteria at Re = 300 and $\phi =2\%$ (ie, at this point, the heat transfer coefficient is maximum and the pressure drop is minimum). On the other hand, the optimal thermodynamic performance was observed at Re = 700 and $\phi =4\%$. The numerical results demonstrated a potential way to exploit nano-suspensions for thermal applications, especially for high-energy flux systems with compact space constraints.     

Investigating the effect of various fin geometries on the thermal performance of a heat sink under natural convection

Experimentally investigates heat dissipation by different longitudinal fins fitted to a cylindrical heat sink under natural convection conditions. Five aluminum fin configurations at base temperatures (70°C, 85°C, 100°C, and 115°C) were studied. The first fin was plain (fin1), while second fin had a triangular edge (fin2). The rest fins have the same triangular edge but with six 1cm circular perforations near the edge (fin3). While the perforations in fin4 were in the middle longitudinal fin length. The last fin (fin5) had twelve 0.5 cm circular perforations distributed into two columns. The measurements were validated with theoretical correlation with an acceptable deviation. The results showed that fin2, fin3, fin4, and fin5 dissipate more heat by 2.4%, 8.7%, 11.4%, and 5% than the flat fin with 9.8%, 11.85%, 11.85%, and 10.82% weight reduction, respectively. The heat transfer coefficient enhanced by 7.98%, 16.81%, 12.35%, and 5.44% for fin5, fin4, fin3, and fin2, respectively. Large circular perforation was more effective to dissipate heat especially when located near the heat source as in fin4 which gives the best heat dissipation with more weight reduction. The proposed fins efficiency were greater than 92%.     

Influence of nanofluids on parallel flow square microchannel heat exchanger performance

The effects of using various types of nanofluids and Reynolds numbers on heat transfer and fluid flow characteristics in a square shaped microchannel heat exchanger (MCHE) is numerically investigated in this study. The performance of an aluminum MCHE with four different types of nanofluids (aluminum oxide (Al₂O₃), silicon dioxide (SiO₂), silver (Ag), and titanium dioxide (TiO₂)), with three different nanoparticle volume fractions of 2%, 5% and 10% using water as base fluid is comprehensively analyzed. The three-dimensional steady, laminar developing flow and conjugate heat transfer governing equations of a balanced MCHE are solved using the finite volume method. The MCHE performance is evaluated in terms of temperature profile, heat transfer rate, heat transfer coefficient, pressure drop, wall shear stress pumping power, effectiveness, and overall performance index. The results reveal that nanofluids can enhance the thermal properties and performance of the heat exchanger while having a slight increase in pressure drop. It was also found that increasing the Reynolds number causes the pumping power to increase and the effectiveness to decrease.     

Thermohydraulic performance of a periodic trapezoidal channel with a triangular cross-section

Simulations are performed to study the heat transfer behaviour of an equilateral triangular section duct following a tortuous path for fully-developed laminar flows with Reynolds numbers below 200. The enhancement of heat transfer and the increase in pressure drop are compared with those for ducts of circular, semi-circular and square section following the same serpentine path. For this flow regime, the triangular duct is shown to be the optimum choice (best heat transfer augmentation compared with increased pressure drop) amongst those studied. The effects of changing the path shape, the apex angle for an isosceles triangular cross-section and rounding of a corner of the equilateral triangular duct are also considered.     

Study on the convective heat transfer and pressure drop in the micro-channel heat sink

Experiments have been performed to investigate the heat transfer characteristics and pressure drop in the micro-channel heat sinks under constant heat flux conditions. The experiments are performed for the Reynolds number and heat flux in the ranges of 200–1000 and 1.80–5.40 kW/m², respectively. The micro-channel heat sink with two different channel heights and two different channel widths are accomplished by wire electrical discharge machine. Effects of different geometrical configurations parameters of the micro-channel and heat flux on the heat transfer characteristics and pressure drop are considered. The micro-channel geometry configuration has significant effect on the enhancement heat transfer and pressure drop. The results of this study are expected to lead to guidelines that will allow the design of the micro-channel heat exchangers with improved heat transfer performance of the electronic devices.     

Heat transfer enhancement of nanofluids flow in microtube with constant heat flux

In this paper, laminar convective heat transfer in a two-dimensional microtube (MT) with 50 μm diameter and 250 μm length with constant heat flux is numerically investigated. The governing (continuity, momentum and energy) equations were solved using the finite volume method (FVM) with the aid of SIMPLE algorithm. Different types of nanofluids Al₂O₃, CuO, SiO₂ and ZnO, with different nanoparticle size 25, 45, 65 and 80 nm, and different volume fractions ranged from 1% to 4% using ethylene glycol as a base fluid were used. This investigation covers Reynolds number in the range of 10 to 1500. The results have shown that SiO₂–EG nanofluid has the highest Nusselt number, followed by ZnO–EG, CuO–EG, Al₂O₃–EG, and lastly pure EG. The Nusselt number for all cases increases with the volume fraction but it decreases with the rise in the diameter of nanoparticles. In all configurations, the Nusselt number increases with Reynolds number.     

Effects of outlet port positions on the jet impingement heat transfer characteristics in the mini-fin heat sink

Effects of outlet port positions on the jet liquid impingement heat transfer characteristics in the mini-rectangular fin heat sink are numerically investigated. The three-dimensional governing equations for fluid flow and heat transfer characteristics are solved using finite volume scheme. The standard k-ε turbulent model is employed to solve the model for describing the heat transfer behaviors. The predicted results obtained from the model are verified by the measured data. The predicted results are reasonable agreement with the measured data. The outlet port positions have significant effect on the uniformities in velocity and temperature. Based on the results from this study, it is expected to lead to guidelines that will allow the design of the cooling system to ensure the electronic devices at the safe operating temperature.     

Boiling Delay Phenomenon in a Thermosyphon Heat Sink and Its Effect on Device Performance

ＢｏｉｌｉｎｇＤｅｌａｙＰｈｅｎｏｍｅｎｏｎｉｎａＴｈｅｒｍｏｓｙｐｈｏｎＨｅａｔＳｉｎｋａｎｄＩｔｓＥｆｆｅｃｔｏｎＤｅｖｉｃｅＰｅｒｆｏｒｍａｎｃｅＷｅｉｌｉｎＨｕ；ＹｉｈｕｉＺｈｏｕ；ＡｉｊｕｎＷａｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＥｎｇｉｎｅｅｒ...     

Numerical simulation of stacked microchannel heat sink with mixing-enhanced passive structure

The paper is focused on the investigation of numerical simulation of stacked two-layer microchannel heat sink with enhanced mixing passive microstructure. In contrast to the smooth microchannel studies in the literature, the microchannel with embedded passive microstructure is chosen. The computational fluid dynamics (CFD) will be used to simulate the flow and heat transfer in a stacked two-layer microchannels with multiple MEMS easy-processing passive microstructures. To simulate the conjugated heat transfer among the heatsink and fluid, the three-dimensional conjugated model is used to solve this problem. The important parameters (e.g. the ratio of embedded structure height to microchannel height and fluid property) are investigated. The ratio of embedded structure height to microchannel height is changed from 0.13 to 0.26. The microchannel Reynolds number is fixed at 14.8. The stacked microchannel with passive structures has better performance than the smooth microchannels.     

An experimental investigation on heat transfer performance of nanofluid pulsating heat pipe

The effect of SiO2 particles on heat transfer performance of a pulsating heat pipe(PHP) was investigated experimentally.DI water was used as the base fluid and contrast medium for the PHP.In order to study and measure the character,there are SiO2 /H2 O nanofluids with different concentration and applying with various heating powers during the experiment investigation.According to the experimental result,the high fraction of SiO2 /H2 O will deteriorate the performance of PHP compared with DI water,i.e.the thermal resistance and the temperature of evaporation section increases.It is in contrary in the case of low fraction of SiO2 /H2 O.Finally,the comparison of the thermal performances between the normal operation system and the static settlement system is given.It is found that both the thermal resistance of nanofluid PHP and the temperature of the evaporation section increase after standing for a period,and it is the same trend for the temperature fluctuation at the identical heating power for PHP.