Nanoporous Low‐κ Polyimide Films via Poly(amic acid)s with Grafted Poly(ethylene glycol) Side Chains from a Reversible Addition–Fragmentation Chain‐Transfer‐Mediated Process

Thermally‐initiated living radical graft polymerization of poly(ethylene glycol) methyl ether methacrylate (PEGMA) with ozone‐pretreated poly[N,N′‐(1,4‐phenylene)‐3,3′,4,4′‐benzophenonetetra‐carboxylic amic acid] (PAmA) via a reversible addition–fragmentation chain‐transfer (RAFT)‐mediated process was carried out. The chemical compositions and structures of the copolymers were characterized by nuclear magnetic resonance (NMR) spectroscopy, thermogravimetric analysis (TGA), X‐ray photoelectron spectroscopy (XPS), and molecular weight measurements. The “living” character of the grafted PEGMA side chains was ascertained in the subsequent extension of the PEGMA side chains. Nanoporous low‐dielectric‐constant (low‐κ) polyimide (PI) films were prepared by thermal imidization of the PAmA graft copolymers under reduced argon pressure, followed by thermal decomposition of the side chains in air. The nanoporous PI films obtained from the RAFT‐mediated graft copolymers had well‐preserved PI backbones, porosity in the range of 5–17 %, and pore size in the range of 30–50 nm. The pores were smaller and the pore‐size distribution more uniform than those of the corresponding nanoporous PI films obtained via graft copolymers from conventional free‐radical processes. Dielectric constants approaching 2 were obtained for the nanoporous PI films prepared from the RAFT‐mediated graft copolymers.     

Self‐Healing Materials via Reversible Crosslinking of Poly(ethylene oxide)‐Block‐Poly(furfuryl glycidyl ether) (PEO‐b‐PFGE) Block Copolymer Films

The application of well‐defined poly(furfuryl glycidyl ether) (PFGE) homopolymers and poly(ethylene oxide)‐b‐poly(furfuryl glycidyl ether) (PEO‐b‐PFGE) block copolymers synthesized by living anionic polymerization as self‐healing materials is demonstrated. This is achieved by thermo‐reversible network formation via (retro) Diels‐Alder chemistry between the furan groups in the side‐chain of the PFGE segments and a bifunctional maleimide crosslinker within drop‐cast polymer films. The process is studied in detail by differential scanning calorimetry (DSC), depth‐sensing indentation, and profilometry. It is shown that such materials are capable of healing complex scratch patterns, also multiple times. Furthermore, microphase separation within PEO‐b‐PFGE block copolymer films is indicated by small angle X‐ray scattering (lamellar morphology with a domain spacing of approximately 19 nm), differential scanning calorimetry, and contact angle measurements.     

Dual‐Tone Patterned Mesoporous Silicate Films Templated From Chemically Amplified Block Copolymers

Directly patterned mesoporous silicate films are prepared using positive‐ and negative‐tone strategies by performing phase selective silica condensation within lithographically exposed poly(styrene‐b‐tert‐butyl acrylate) (PS‐b‐PtbA) templates containing photoacid generators. The use of supercritical fluid as a process medium enables rapid diffusion of the silicate precursor within the prepatterned block copolymer template film without disrupting its morphology. Template exposure through the mask triggers area selective generation of acid, which in turn both deprotects the poly(tert‐butyl acrylate) block to yield a poly(acrylic acid) block and provides a catalyst for silica precursor condensation yielding pattern formation at the device level. Because the acid generated in the UV exposed field preferentially segregates into hydrophilic poly(acrylic acid) domains of the phase segregated, deprotected block copolymer, precursor condensation is simultaneously controlled at nanoscopic length scales via templating by the underlying block copolymer morphology. The ability of PS‐b‐PtbA to undergo chemical transformation in two stages, deprotection followed by crosslinking, enables precise replications of the photomask in positive and negative tones. Detemplating via calcination yields patterned mesoporous silicate films without etching. Template formulations are optimized using infrared spectroscopic studies and the silicate films are characterized using electron microscopy and scanning force microscopy.     

Blood‐Inert Surfaces via Ion‐Pair Anchoring of Zwitterionic Copolymer Brushes in Human Whole Blood

A strategy to create blood‐inert surfaces in human whole blood via ion‐pair anchoring of zwitterionic copolymer brushesand a systematic study of how well‐defined chain lengths and well‐controlled surface packing densities of zwitterionic polymers affect blood compatibility are reported. Well‐defined diblock copolymers, poly(11‐mercaptoundecyl sulfonic acid)‐block‐poly(sulfobetaine methacrylate) (PSA‐b‐PSBMA) with varying zwitterionic PSBMA or negatively charged PSA lengths, are synthesized via atom‐transfer radical polymerization (ATRP). PSA‐b‐PSBMA is grafted onto a surface covered with polycation brushes as a mimic polar/hydrophilic biomaterial surface via ion‐pair anchoring at a range of copolymer concentrations. Protein adsorption from single‐protein solutions, 100% blood serum, and 100% blood plasma onto the surfaces covered with PSA‐b‐PSBMA brushes is evaluated using a surface plasmon resonance sensor. Copolymer brushes containing a high amount of zwitterionic SBMA units are further challenged with human whole blood. Low protein‐fouling surfaces with >90% reduction with respect to uncoated surfaces are achieved with longer PSA blocks and higher concentrations of PSA‐b‐PSBMA copolymers using the ion‐pair anchoring approach. This work provides a platform to achieve the control of various surface parameters and a practical method to create blood‐inert surfaces in whole blood by grafting ionic‐zwitterionic copolymers to charged biomaterials via charge pairing.     

Swelling Behavior of Multiresponsive Poly(methacrylic acid)‐block‐‐poly(N‐isopropylacrylamide) Brushes Synthesized Using Surface‐Initiated Photoiniferter‐Mediated Photopolymerization

Surface‐initiated photoiniferter‐mediated photopolymerization (SI‐PMP) in presence of tetraethylthiuram disulfide is used to directly synthesize surface‐grafted poly(methacrylic acid)‐block‐poly(N‐isopropylacrylamide) (PMAA‐b‐PNIPAM) layers. The response of these PMAA‐b‐PNIPAM bi‐level brushes to changes in pH, temperature and ionic strength is investigated by using in‐situ multi‐angle ellipsometry to measure changes in solvated layer thickness. As expected for a block copolymer architecture, PMAA blocks swell as pH is increased, with the maximum change in the thickness occurring near pH = 5, and PNIPAM blocks exhibit lower critical solution temperature (LCST) behavior, marked by a broad transition between swollen and collapsed states. The response of the bi‐level brushes to changes in added salt at constant pH is complex, as the swelling behaviors of both the weak polyelectrolyte, PMAA, and thermoresponsive PNIPAM are affected by changes in ionic strength. This work demonstrates not only the robustness of SI‐PMP for making novel, bi‐level stimuli‐responsive brushes, but also the complex links between synthesis, structure, and response of these materials.     

Self Encapsulated Poly(3‐hexylthiophene)‐poly(fluorinated alkyl methacrylate) Rod‐Coil Block Copolymers with High Field Effect Mobilities on Bare SiO2

Conjugated rod‐coil block copolymers provide an interesting route towards enhancing the properties of the conjugated block due to self‐assembly and the interplay of rod‐rod and rod‐coil interactions. Here, we demonstrate the ability of an attached semi‐fluorinated block to significantly improve upon the charge carrier properties of regioregular poly(3‐hexyl thiophene) (rr‐P3HT) materials on bare SiO₂. The thin film hole mobilities on bare SiO₂ dielectric surfaces of poly (3‐hexyl thiophene)‐block‐polyfluoromethacrylates (P3HT‐b‐PFMAs) can approach up to 0.12 cm² V^?1 s^?1 with only 33 wt% of the P3HT block incorporated in the copolymer, as compared to rr‐P3HT alone which typically has mobilities averaging 0.03 cm² V^?1 s^?1. To our knowledge, this is the highest mobility reported in literature for block copolymers containing a P3HT. More importantly, these high hole mobilities are achieved without multistep OTS treatments, argon protection, or post‐annealing conditions. Grazing incidence wide‐angle x‐ray scattering (GIWAX) data revealed that in the P3HT‐b‐PFMA copolymers, the P3HT rod block self‐assembles into highly ordered lamellar structures, similar to that of the rr‐P3HT homopolymer. Grazing incidence small‐angle x‐ray scattering (GISAXS) data revealed that lamellar structures are only observed in perpendicular direction with short PFMA blocks, while lamellae in both perpendicular and parallel directions are observed in polymers with longer PFMA blocks. AFM, GIWAXS, and contact angle measurements also indicate that PFMA block assembles at the polymer thin film surface and forms an encapsulation layer. The high charge carrier mobilities and the hydrophobic surface of the block copolymer films clearly demonstrates the influence of the coil block segment on device performance by balancing the crystallization and microphase separation in the bulk morphological structure.     

Virus Filtration Membranes Prepared from Nanoporous Block Copolymers with Good Dimensional Stability under High Pressures and Excellent Solvent Resistance

We introduce a nanoporous membrane suitable for virus filtration with good dimensional stability under high pressures maintaining high selectivity. The membrane consists of a double layer: The upper layer is a nanoporous film with pore size of ～17 nm and a thickness of ～160 nm, which was prepared by polystyrene‐block‐poly(methyl methacrylate) copolymer (PS‐b‐PMMA) where PMMA block was removed by ultraviolet irradiation followed by rinsing with acetic acid. The nanoporous block copolymer film was combined with a conventional micro‐filtration membrane to enhance mechanical strength. The membrane employed in this study did not show any damage or crack even at a pressure of 2 bar, while high selectivity was maintained for the filtration of human rhinovirus type 14 which has a diameter of ～30 nm and is a major pathogen of the common cold in humans. Furthermore, due to crosslinked PS matrix during the UV irradiation, the nanoporous membrane showed excellent resistance to all organic solvents. This could be used under harsh filtration conditions such as high temperature and strong acidic (or basic) solution.     

pH‐Responsive Flower‐Type Micelles Formed by a Biotinylated Poly(2‐vinylpyridine)‐block‐poly(ethylene oxide)‐block‐poly(ε‐caprolactone) Triblock Copolymer

In the present work, a method is proposed to assemble pH‐responsive, flower‐like micelles that can expose a targeting unit at their periphery upon a decrease in pH. The micelles are composed of a novel biotinylated triblock copolymer of poly(εε‐caprolactone)‐block‐poly(ethylene oxide)‐block‐poly(2‐vinylpyridine) (PCL‐b‐PEO‐b‐P2VP) and the non‐biotinylated analogue. The block copolymers are synthesized by sequential anionic and ring‐opening polymerization. The pH‐dependent micellization behaviour in aqueous solution of the triblock copolymers developed is studied using dynamic light scattering, zeta potential, transmission electron microscopy (TEM), and fluorimetric measurements. The shielding of the biotin at neutral pH and their availability at the micelle surface upon protonation is established by TEM and surface plasmon resonance with avidin and streptavidin‐coated gold surfaces. The preliminary stealthy behavior of these pH‐responsive micelles is examined using the complement activation (CH50) test.     

Synthesis of Amphiphilic Copolymers of Poly(ethylene oxide) and Poly(ϵ‐caprolactone) with Different Architectures,and Their Role in the Preparation of Stealthy Nanoparticles

Well‐defined copolymers of biocompatible poly(?‐caprolactone) (PCL) and poly(ethylene oxide) (PEO) are synthesized by two methods. Graft copolymers with a gradient structure are prepared by ring‐opening copolymerization of ?‐caprolactone (?CL) with a PEO macromonomer of the ?CL‐type. The ?CL polymerization is initiated by a PEO macroinitiator to prepare diblock copolymers. These amphiphilic copolymers are used as stabilizers for biodegradable poly(D,L ‐lactide) (PLA) nanoparticles prepared by a nanoprecipitation technique. The effect of the copolymer characteristic features (architecture, composition, and amount) on the nanoparticle formation and structure is investigated. The average size, size distribution, and stability of aqueous suspensions of the nanoparticles is measured by dynamic light scattering. For comparison, an amphiphilic random copolymer, poly(methyl methacrylate‐co‐methacrylic acid) (P(MMA‐co‐MA)), is synthesized. The stealthiness of the nanoparticles is analyzed in relation to the copolymer used as stabilizer. For this purpose, the activation of the complement system by nanoparticles is investigated in vitro using human serum. This activation is much less important whenever the nanoparticles are stabilized by a PEO‐containing copolymer rather than by the P(MMA‐co‐MA) amphiphile. The graft copolymers with a gradient structure and the diblock copolymers with similar macromolecular characteristics (molecular weight and hydrophilicity) are compared on the basis of their capacity to coat PLA nanoparticles and to make them stealthy.     

Fabrication of a Highly Transparent Conductive Thin Film from Polypyrrole/Poly(methyl methacrylate) Core/Shell Nanospheres

Polypyrrole (PPy)/poly(methyl methacrylate) (PMMA) core/shell nanospheres with diameters of several tens of nanometers have been synthesized by two‐step microemulsion polymerization, and highly transparent conductive thin films have been fabricated using the nanospheres as a filler in a PMMA matrix. The PPy/PMMA core/shell nanoparticles and their composite films have been extensively characterized using transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDX), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier‐transform infrared (FT‐IR) and UV‐vis spectroscopies, and electrical‐conductivity measurements. The fabricated polymer films containing the PPy/PMMA core/shell nanofillers show a much better transparent conductive performance than that of uncoated PPy nanoparticles with similar dimensions or bulk PPy particles with diameters of several hundreds of nanometers. The PMMA shell promotes compatibility of the conductive fillers with the PMMA matrix and enhances dispersion of the PPy/PMMA core/shell nanofillers. In addition, the nanometer‐thick PMMA shell has a lower glass‐transition temperature (T_g), and can be effectively annealed to form a conductive‐filler network with a high electrical conductivity at a relatively low filler content.     

Vertical Orientation of Nanodomains on Versatile Substrates through Self‐Neutralization Induced by Star‐Shaped Block Copolymers

Vertical orientation of lamellar and cylindrical nanodomains of block copolymers on substrates is one of the most promising means for developing nanopatterns of next‐generation microelectronics and storage media. However, parallel orientation of lamellar and cylindrical nanodomains is generally preferred due to different affinity between two block segments in a block copolymer toward the substrate and/or air. Thus, vertical orientation of the nanodomains is only obtained under various pre‐ or post‐treatments such as surface neutralization by random copolymers, solvent annealing, and electric or magnetic field. Here, a novel self‐neutralization concept is introduced by designing molecular architecture of a block copolymer. Star‐shaped 18 arm poly(methyl methacrylate)‐block‐polystyrene copolymers ((PMMA‐b‐PS)₁₈) exhibiting lamellar and PMMA cylindrical nanodomains are synthesized. When a thin film of (PMMA‐b‐PS)₁₈ is spin‐coated on a substrate, vertically aligned lamellar and cylindrical nanodomains are obtained without any pre‐ or post‐treatment, although thermal annealing for a short time (less than 30 min) is required to improve the spatial array of vertically aligned nanodomains. This result is attributed to the star‐shaped molecular architecture that overcomes the difference in the surface affinity between PS and PMMA chains. Moreover, vertical orientations are observed on versatile substrates, for instance, semiconductor (Si, SiO_x), metal (Au), PS or PMMA‐brushed substrate, and a flexible polymer sheet of polyethylene naphthalate.     

Donor–Acceptor Poly(3‐hexylthiophene)‐block‐Pendent Poly(isoindigo) with Dual Roles of Charge Transporting and Storage Layer for High‐Performance Transistor‐Type Memory Applications

Field‐effect transistor memories usually require one additional charge storage layer between the gate contact and organic semiconductor channel. To avoid such complication, new donor–acceptor rod–coil diblock copolymers (P3HT₄₄‐b‐Piso_n) of poly(3‐hexylthiophene) (P3HT)‐block‐poly(pendent isoindigo) (Piso) are designed, which exhibit high performance transistor memory characteristics without additional charge storage layer. The P3HT and Piso blocks are acted as the charge transporting and storage elements, respectively. The prepared P3HT₄₄‐b‐Piso_n can be self‐assembled into fibrillar‐like nanostructures after the thermal annealing process, confirmed by atomic force microscopy and grazing‐incidence X‐ray diffraction. The lowest‐unoccupied molecular orbital levels of the studied polymers are significantly lowered as the block length of Piso increases, leading to a stronger electron affinity as well as charge storage capability. The field‐effect transistors (FETs) fabricated from P3HT₄₄‐b‐Piso_n possess p‐type mobilities up to 4.56 × 10^?2 cm² V^?1 s^?1, similar to that of the regioregular P3HT. More interestingly, the FET memory devices fabricated from P3HT₄₄‐b‐Piso_n exhibit a memory window ranging from 26 to 79 V by manipulating the block length of Piso, and showed stable long‐term data endurance. The results suggest that the FET characteristics and data storage capability can be effectively tuned simultaneously through donor/acceptor ratio and thin film morphology in the block copolymer system.     

Site‐Specific Placement of Au Nanoparticles on Chemical Nanopatterns Prepared by Molecular Transfer Printing Using Block‐Copolymer Films

Inexpensive, large area patterning of ex‐situ synthesized metallic nanoparticles (NPs) at the nanoscale may enable many technologies including plasmonics, nanowire growth, and catalysis. Here, site‐specific localization of Au NPs onto nanoscale chemical patterns of polymer brushes is investigated. In this approach, patterns of hydroxyl‐terminated poly(styrene) brushes are transferred from poly(styrene‐block‐methyl methacrylate) (PS‐b‐PMMA) block copolymer films onto a replica substrate via molecular transfer printing, and the remaining areas are filled with hydroxyl‐terminated poly(2‐vinyl pyridine) (P2VP‐OH) brushes. Citrate‐stabilized Au NPs (13 nm) selectively bind to P2VP‐OH functionalized regions and the quality of the resulting assemblies depends on high chemical contrast in the patterned brushes. Minimization of the interpenetration of P2VP‐OH chains into PS brushes during processing is the key for achieving high chemical contrast. Large area hexagonal arrays of single Au NPs with a placement accuracy of 3.4 nm were obtained on patterns (～20 nm spots, ～40 nm pitch) derived from self‐assembled cylinder‐forming PS‐b‐PMMA films. Linear arrays of Au NPs were generated on patterns (40 nm lines, 80nm pitch) derived from lamellae‐forming PS‐b‐PMMA that had been directed to assemble on lithographically defined masters.     

Widely Tunable Morphologies in Block Copolymer Thin Films Through Solvent Vapor Annealing Using Mixtures of Selective Solvents

Thin films of block copolymers are extremely attractive for nanofabrication because of their ability to form uniform and periodic nanoscale structures by microphase separation. One shortcoming of this approach is that to date the design of a desired equilibrium structure requires synthesis of a block copolymer de novo within the corresponding volume ratio of the blocks. In this work, solvent vapor annealing in supported thin films of poly(2‐hydroxyethyl methacrylate)‐block‐poly(methyl methacrylate) [PHEMA‐b‐PMMA] by means of grazing incidence small angle X‐ray scattering (GISAXS) is investigated. A spin‐coated thin film of a lamellar block copolymer is solvent vapor annealed to induce microphase separation and improve the long‐range order of the self‐assembled pattern. Annealing in a mixture of solvent vapors using a controlled volume ratio of solvents, which are chosen to be preferential for each block, enables selective formation of ordered lamellae, gyroid, hexagonal, or spherical morphologies from a single‐block copolymer with a fixed volume fraction. The selected microstructure is then kinetically trapped in the dry film by rapid drying. This paper describes what is thought to be the first reported case where in situ methods are used to study the transition of block copolymer films from one initial disordered morphology to four different ordered morphologies, covering much of the theoretical diblock copolymer phase diagram.     

Fabrication of Nanoporous Alumina Ultrafiltration Membrane with Tunable Pore Size Using Block Copolymer Templates

Control over nanopore size and 3D structure is necessary to advance membrane performance in ubiquitous separation devices. Here, inorganic nanoporous membranes are fabricated by combining the assembly of cylinder‐forming poly(styrene‐block‐methyl methacrylate) (PS‐b‐PMMA) block copolymer and sequential infiltration synthesis (SIS). A key advance relates to the use of PMMA majority block copolymer films and the optimization of thermal annealing temperature and substrate chemistry to achieve through‐film vertical PS cylinders. The resulting morphology allows for direct fabrication of nanoporous AlO_x by selective growth of Al₂O₃ in the PMMA matrix during the SIS process, followed by polymer removal using oxygen plasma. Control over the pore diameter is achieved by varying the number of Al₂O₃ growth cycles, leading to pore size reduction from 21 to 16 nm. 3D characterization, using scanning transmission electron microscopy tomography, reveals that the AlO_x channels are continuous through the film and have a gradual increase in pore size with depth. Finally, the ultrafiltration performance of the fabricated AlO_x membrane for protein separation as a function of protein size and charge is demonstrated.     

Hierarchical Assembly of Complex Block Copolymer Nanoparticles into Multicompartment Superstructures through Tunable Interparticle Associations

A challenging aim in both materials physics and chemistry is the construction of complex and functional superstructures from designed nanoscale building units. Block copolymer nanoparticles with morphological variety and compositional complexity have been made with solution‐based assembly. However, routine ability to build hierarchical superstructures by inter‐nanoparticle association is not yet possible. A hierarchical assembly strategy of organizing pre‐formed spherical block copolymer nanoparticles into superstructures, including linear, circular, and close‐packed arrays, via tunable interparticle interactions is presented. Solution‐state mixtures are made of two amphiphilic diblock copolymers, poly(acrylic acid)‐block‐poly(methyl methacrylate) (PAA‐b‐PMMA) and poly(acrylic acid)‐block‐polybutadiene (PAA‐b‐PB) with additional crown ether functionalities grafted onto 40 mol% of the AA repeat units on the PAA‐b‐PMMA diblock copolymer. Through kinetic control of the solution assembly process in aqueous/N,N‐dimethylformamide (DMF) mixtures (4:1 water:DMF), spherical nanoparticles with compositional complexity confined in both the core and shell are obtained. Benefiting from host‐guest chemistry, interparticle association is triggered and tuned by the addition of di‐functional organoamines due to amine‐crown ether complexation. The resultant multiparticle superstructures contain well‐defined multicompartments within individual, constituent nanoparticles due to the local separation of unlike PB and PMMA hydrophobic blocks within the cores of the individual particles. Through competitive complexation with potassium ions, the superstructures are disassembled into individual multicomparment nanoparticles.     

Nanostructured Poly(styrene‐b‐butadiene‐b‐styrene) (SBS) Membranes for the Separation of Nitrogen from Natural Gas

The preparation and characterization of new, tailor‐made polymeric membranes using poly(styrene‐b‐butadiene‐b‐styrene) (SBS) triblock copolymers for gas separation are reported. Structural differences in the copolymer membranes, obtained by manipulation of the self‐assembly of the block copolymers in solution, are characterized using atomic force microscopy, transmission electron microscopy, and the transport properties of three gases (CO₂, N₂, and CH₄). The CH₄/N₂ ideal selectivity of 7.2, the highest value ever reported for block copolymers, with CH₄ permeability of 41 Barrer, is obtained with a membrane containing the higher amount of polybutadiene (79 wt%) and characterized by a hexagonal array of columnar polystyrene cylinders normal to the membrane surface. Membranes with such a high separation factor are able to ease the exploitation of natural gas with high N₂ content. The CO₂/N₂ ideal selectivity of 50, coupled with a CO₂ permeability of 289 Barrer, makes SBS a good candidate for the preparation of membranes for the post‐combustion capture of carbon dioxide.     

Gel Electrolyte Derived from Poly(ethylene glycol) Blending Poly(acrylonitrile) Applicable to Roll‐to‐Roll Assembly of Electric Double Layer Capacitors

The synthesis of a gelled polymer electrolyte (GPE) using poly(ethylene glycol) blending poly(acrylonitrile) (i.e., PAN‐b‐PEG‐b‐PAN) as a host, dimethyl formamide (DMF) as a plasticizer and LiClO₄ as an electrolytic salt for electric double layer capacitors (EDLCs) is reported. The PAN‐b‐PEG‐b‐PAN copolymer in the GPE has a linear configuration for high ionic conductivity and excellent compatibility with carbon electrodes. When assembling the GPE in a carbon‐based symmetric EDLC, the copolymer network facilitates ion motion by reducing the equivalent series resistance and Warburg resistance of the capacitor. This symmetric cell has a capacitance value of 101 F g^?1 at 0.125 A g^?1 and can deliver an energy level of 11.5 Wh kg^?1 at a high power of 10 000 W kg^?1 over a voltage window of 2.1 V. This cell shows superior stability, with little decay of specific capacitance after 30 000 galvanostatic charge‐discharge cycles. The distinctive merit of the GPE film is its adjustable mechanical integrity, which makes the roll‐to‐roll assembly of GPE‐based EDLCs readily scalable to industrial levels.     

A General Strategy to Disperse and Functionalize Carbon Nanotubes Using Conjugated Block Copolymers

A general strategy to disperse and functionalize pristine carbon nanotubes in a single‐step process is developed using conjugated block copolymers. The conjugated block copolymer contains two blocks: a conjugated polymer block of poly(3‐hexylthiophene), and a functional non‐conjugated block with tunable composition. When the pristine carbon nanotubes are sonicated with the conjugated block copolymers, the poly(3‐hexylthiophene) blocks bind to the surface of de‐bundled carbon nanotubes through non‐covalent π–π interactions, stabilizing the carbon nanotube dispersion, while the functional blocks locate at the outer surface of carbon nanotubes, rendering the carbon nanotubes with desired functionality. In this paper, conjugated block copolymers of poly(3‐hexylthiophene)‐b‐poly(methyl methacrylate), poly(3‐hexylthiophene)‐b‐poly(acrylic acid), and poly(3‐hexylthiophene)‐b‐poly(poly(ethylene glycol) acrylate) are used to demonstrate this general strategy.     

Electrochemically Triggered Selective Adsorption of Biotemplated Nanoparticles on Self‐Assembled Organometallic Diblock Copolymer Thin Films

The controlled adsorption of the iron‐containing cage protein ferritin at the nanoscale using stimuli‐responsive self‐assembled diblock copolymer thin‐film templates is reported. The diblock copolymer used study consists of a cylinder‐forming polystyrene‐block‐polyferrocenylsilane (PS‐b‐PFS), with PFS as the minor block, and shows reversible redox properties. To prevent any spontaneous protein adsorption on either block, the electrolyte pH is selected to leave the ferritin negatively charged, and the protein concentration and solution ionic strength are carefully tuned. Selective adsorption of ferritin on the PFS domains of the self‐assembled thin films is then triggered in situ by applying a positive potential, simultaneously oxidizing the PFS and attracting the ferritin electrostatically.