Physical properties and reaction kinetics of cotton cellulose crosslinked with dimethyloldihydroxyethyleneurea–maleic acid

Two dicarboxylic acids were used to join with dimethyloldihydroxyethyleneurea (DMDHEU) as crosslinking agents to treated cotton fabrics. These results reveal that the dry crease recovery angle values of the treated fabrics for DMDHEU–maleic acid are higher than those for DMDHEU–tartaric acid at a given wet crease recovery angle and tensile strength retention. The IR spectra show that the reaction between the –OH of DMDHEU and cellulose and the vinyl groups of maleic acids occurred. The cross section of the DMDHEU–maleic acid and DMDHEU–tartaric acid treated fibers and the energies of activation and other data of reaction kinetics for DMDHEU–maleic acid and DMDHEU–tartaric acid strongly suggest that the reaction of vinyl groups of maleic acid with cellulose molecules can take place during the pad/dry‐cure process. Additionally, the surface distribution of crosslinking agent on the finished fabrics for DMDHEU–maleic acid is slightly lower than that for DMDHEU–tartaric acid. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3886–3893, 2004     

Degree of crosslinked cotton cellulose with prereacted DMDHEU–AA

Dimethyloldihydroxyethyleneurea (DMDHEU) and acrylic acid (AA) were used to synthesize the dimethyloldihydroxyethyleneurea–acrylic acid product (DMDHEU–AA, mole ratios of DMDHEU/AA = 1/0, 1/1, and 1/2, respectively). Cotton fabrics were treated with the various prereacted DMDHEU–AA products by changing resin concentrations in the bath. We found that the dry crease recovery angle (DCRA) and wet crease recovery angle (WCRA) of the treated fabrics increased with the increase of acrylic acid in the prereacted DMDHEU–AA at the same value of resin concentration in the bath, whereas the tensile strength retention (TSR) showed the inverse tendency. For a given value of number of crosslinks per anhydroglucose unit (CL/AGU), the DCRA and WCRA values of the DMDHEU–AA‐treated fabrics were higher than those for DMDHEU‐treated fabrics. Additionally, agent distribution and the reaction between –COOH of the crosslinking agent and cellulose molecule were also investigated in this study. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1580–1586, 2001     

Semitransparent poly(styrene‐r‐maleic anhydride)/alumina nanocomposites for optical applications

This article presents the development and characterization of transparent poly(styrene‐r‐maleic anhydride) (SMA)/alumina nanocomposites for potential use in optical applications. Chemically treated spherical alumina nanoparticles were dispersed in an SMA matrix polymer via the solution and melt‐compounding methods to produce 2 wt % nanocomposites. Field emission scanning electron microscopy was used to examine the nanoparticle dispersion. When the solution method was used, nanoparticle reagglomeration occurred, despite the fairly good polymer wetting. However, through the coating of the alumina nanoparticles with a thin layer (ca. 20 nm) of low‐molecular‐weight SMA, reagglomeration was absent in the melt‐compounded samples, and this resulted in excellent nanoparticle dispersion. The resultant nanocomposites were semitransparent to visible light at a 2‐mm thickness with improved UV‐barrier properties. Their impact strengths, tensile strengths, and strains at break were slightly reduced compared with those of their neat resin counterpart, whereas a small enhancement in their moduli was achieved. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Crosslinking of cotton cellulose in the presence of serine and glycine. II. Pore structures and agent distribution

Serine and glycine are selected as coreactants to combine with dimethylol‐dihydroxyethyleneurea (DMDHEU). We found that the pore structures of DMDHEU‐crosslinked cottons are changed. DMDHEU alone has lower values of equilibrium absorption, structural diffusion resistance constant, and rate constant, but higher value of activation energy than do DMDHEU–serine and DMDHEU–glycine. On the other hand, DMDHEU–serine has higher values of structural diffusion resistance constant and lower values of equilibrium absorption and rate constant than does DMDHEU–glycine; however, the hydroxyl group contained in serine has the higher affinity toward direct dye resulting in the decrease in the value of activation energy. The expansion patterns of cross section show that the degree of the expansion of the DMDHEU‐crosslinked fiber is lower than that of the DMDHEU–serine‐ and DMDHEU–glycine‐crosslinked fibers. The distribution of crosslinking agents on the crosslinked fabrics reveals the slightly higher surface distribution of DMDHEU–serine and DMDHEU–glycine. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1578–1584, 2006     

Crosslinking structures and dyeing kinetics of cotton cellulose treated with a steeped process

A steeped procedure was introduced to the durable press finishing process in this study to study some physical properties, the crosslinking structure, and the pore structure. The results showed that the values of the dry and wet crease recovery angles of fabrics treated with the steep–pad–dry–cure process were higher than those of fabrics treated with the pad–dry–cure process, and those phenomena increased with higher steeped temperatures and longer times. The lengths of the crosslinks for the steep–pad–dry–cure process were higher than those for the pad–dry–cure process at a given number of crosslinks per anhydroglucose unit. The fabrics treated with the steep–pad–dry–cure process had higher values of the dye absorption, rate constant, and structural diffusion resistance constant than those treated with the pad–dry–cure process at the same dyeing temperature; however, they had lower values of the equilibrium absorption and activation energy than those treated with the pad–dry–cure process. The results of thin‐layer chromatography, H‐NMR, ¹³C‐NMR, and IR analyses suggested that self‐condensation between the crosslinking agents occurred during the steeped procedure. Additionally, the steep–pad–dry–cure‐treated fabric had more inner agent distribution than the pad–dry–cure‐treated fabric. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2555–2562, 2005     

A new crosslinked protein fiber from gliadin and the effect of crosslinking parameters on its mechanical properties and water stability

BACKGROUND: Although several cereal proteins have been used to develop fibers and films, it has not been possible to obtain protein materials with good mechanical properties and water stability, even after crosslinking. Previously, high concentrations of glutaraldehyde were used to improve the mechanical properties of protein fibers but the effect of crosslinking conditions on the properties of the crosslinked materials has not been studied in detail. RESULTS: Low concentrations of glutaraldehyde can be used to improve the mechanical properties and water stability of gliadin fibers. Quantitative relationships that can predict the breaking tenacity of the fibers at various crosslinking conditions are developed. Glutaraldehyde crosslinking is more resistant to hydrolysis in neutral pH than under acidic conditions in terms of increasing and retaining the breaking tenacity. The crosslinked fibers show improved resistance to hydrolysis over poly(lactic acid) fibers in aqueous dispersions at pH = 4 and 7 at 50 and 90 °C, respectively. CONCLUSIONS: This study shows that low concentrations of glutaraldehyde can impart excellent mechanical properties to gliadin fibers. The quantitative relationships developed can be used to select the crosslinking conditions such low glutaraldehyde concentration and high temperature or vice versa to obtain the desired improvement in mechanical properties or water stability. Copyright © 2008 Society of Chemical Industry     

Crosslinking of cotton cellulose in the presence of serine and glycine. I. Physical properties and reaction kinetics

Serine and glycine were used to combine with dimethyloldihydroxyethyleneurea (DMDHEU) as crosslinking agents to study the physical properties of the crosslinked fabrics and the reaction kinetics, and find that the bound nitrogen is in the series of DMDHEU ? DMDHEU‐serine > DMDHEU‐glycine at the same resin concentration. The results also show that the wet crease recovery angle (WCRA) value of the treated fabrics for the three crosslinking agent systems is in the series of DMDHEU‐serine > DMDHEU‐glycine > DMDHEU alone at a given dry crease recovery angle (DCRA). The DCRA values of the treated fabrics for DMDHEU alone are higher than those for DMDHEU‐α‐amino acids for a given value of tensile strength retention (TSR). WCRA values for the various treated fabrics is in the rank of DMDHEU‐serine > DMDHEU alone > DMDHEU‐glycine at the same TSR. Rate constants for the various crosslinking agents are in the series of DMDHEU‐glycine > DMDHEU‐serine > DMDHEU alone at the given heated temperatures. Energies needed to crosslink and the values of enthalpies and entropies of activation are all DMDHEU‐glycine > DMDHEU‐serine > DMDHEU alone. Infrared ray (IR) spectra strongly suggest the reaction between DMDHEU and serine and the reaction between the hydroxyl group (cellulose) and serine can occur in the pad‐dry‐cure process, but only a little for the latter. The reaction between the functional groups of serine and the aluminum ion to form a complex also confirm with IR spectrum. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 595–603, 2005     

Role of green tea polyphenol crosslinking in alleviating ultraviolet‐radiation effects on collagen

The widespread application of collagen warrants studies on the effects of ultraviolet (UV) radiation on stabilized collagen. The negative impact of UV radiation is well known. Because collagen is used as a biomaterial in various biomedical applications, knowing the effects of UV irradiation on stabilized collagen has become essential. In this study, the effects of UV irradiation on collagen stabilized with green tea polyphenols, that is, Acacia mearnsii (wattle), and catechin has been studied. The fluorescence intensity has been found to decrease with irradiation for native and wattle‐treated collagen. Spectral studies have indicated that the photodegradation products increase after irradiation for native collagen, whereas collagen treated with catechin or A.mearnsii exhibits different responses depending on the duration of the irradiation. The duration of the irradiation has a significant influence on polyphenol‐treated collagen. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Physical properties of crosslinked cellulose catalyzed with nano titanium dioxide

Four different carboxylic acids, 1,2,3,4‐butane tetracarboxylic acid (BTCA), maleic acid (MA), succinic acid (SUA), and citric acid (CA), were used as crosslinking agents to treat cotton fabrics in the presence of nanometer titanium dioxide (TiO₂) as a catalyst under UV irradiation. The dry crease recovery angle (DCRA) and wet crease recovery angle (WCRA) values of the treated fabrics were ranked BTCA > MA > CA > SUA and the tensile strength retention (TSR) values were ranked BTCA < MA < CA < SUA at a given resin concentration, catalyst concentration, and irradiation time period. The physical properties of the treated fabrics for nanometer silver/nanometer titanium dioxide (Ag/TiO₂) catalyst showed the same tendency. At a given DCRA, the WCRA values were ranked in the order BTCA ≒ MA > CA ≒ SUA; and at a given value of the TSR, the WCRA and DCRA values were both ranked in the order BTCA > MA > CA > SUA. The softness values of the carboxylic acid treated fabrics in the presence of nanometer TiO₂ catalyst were all better than that of the untreated fabric. Surface deposition of the treated fabrics for BTCA, which contains one vinyl double bond and four carboxylic acid groups, was higher than that for CA, which contains no vinyl double bond. IR spectra and electron spectroscopy for chemical analysis survey spectra showed the ester bond crosslink between the cellulose molecule and the various acids used in this study. The values of DCRA, WCRA, and add‐on of the CA crosslinked fabrics for the mixed catalysts were in the order ZrO₂/TiO₂ < SiO₂/TiO₂ < Ag/TiO₂. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2450–2456, 2005     

Electrical conductivity and thermal properties of poly(m‐aminophenyl acetic acid) and its copolymers with aniline

Poly(m‐aminophenyl acetic acid) was synthesized under different conditions from the respective monomer, using ammonium persulfate as oxidizing agent in both the presence and the absence of CuCl₂ in HCl(aq). Moreover, the copolymers between aniline and m‐aminophenyl acetic acid were prepared at several feed mol ratios (f₁) of aniline. Copper was introduced by the Batch method in the homo‐ and copolymers of different compositions. The polymers were characterized by FTIR and UV‐vis spectroscopy, elemental analysis, thermal analysis, and electrical conductivity. The thermal stability and the content of copper increased as the content of aniline was increased in the copolymers. Moreover, the copolymers showed a high thermal stability; at 400°C a weight loss < 10% was observed. The electrical conductivity was increased with a higher content of aniline in the copolymers, achieving semiconduction values. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1484–1492, 2003     

Degree of crosslinking and physical properties of dimethyloldihydroxyethyleneurea/acrylic acid crosslinked cotton fabrics after treatment with various metallic salts

Three metallic salts were used to posttreat dimethyloldihydroxyethyleneurea (DMDHEU)/acrylic acid (AA) crosslinked cotton fabrics, and the results showed that at a given value of the tensile strength retention (TSR), the dry crease recovery angle (DCRA) and wet crease recovery angle (WCRA) of the crosslinked and posttreated fabrics were higher than those of the DMDHEU–AA‐treated fabrics, and those of the crosslinked and posttreated fabrics were in the order of Ag⁺ > Cu⁺² > Al⁺³. The DCRA and TSR values for the crosslinked and posttreated fabrics were higher than those for the DMDHEU–AA‐crosslinked fabrics, and those for the crosslinked and posttreated fabrics were in the order of Ag⁺ > Cu⁺² > Al⁺³; however, WCRA values for the crosslinked and posttreated fabrics were lower than those for the DMDHEU–AA‐crosslinked fabrics, and those for the crosslinked and posttreated fabrics were ranked as Ag⁺ > Cu⁺² > Al⁺³ at a given number of crosslinks per anhydroglucose unit. IR spectra clearly revealed the different interactions and bonding states between the hydroxyl group of the cellulose and the various metallic ions and the strength of the interaction. All crosslinked and posttreated fabric samples showed good odor absorption and antibacterial and washing‐fastness properties. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 584–594, 2005     

Silver‐nanoparticle‐loaded chitosan lactate films with fair antibacterial properties

Food quality and safety are major concerns in the food industry. Antimicrobial packaging can be considered an emerging technology that could have a significant impact on life and food safety. Antimicrobial agents in food packaging can control the microbial population and target specific microorganisms to provide greater safety and higher quality products. In this work, a lactic acid grafted chitosan film was synthesized. Silver nanoparticles were loaded into the chitosan lactate (CL) film by equilibration in a silver nitrate solution, which was followed by citrate reduction. The presence of silver nanoparticles was confirmed with transmission electron microscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, and thermogravimetric analysis of the film. The silver‐nanoparticle‐loaded CL film was investigated for its antimicrobial properties against Escherichia coli. This newly developed material showed strong antibacterial properties and thus has potential for use as an antibacterial food‐packaging material. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Stability constants of polymer‐bound iminodiacetate‐type chelating agents with some transition‐metal ions

A chelating vinyl monomer, glycidyl methacrylate (GMA)–iminodiacetic acid (IDA), was formed by the reaction between GMA and IDA. Three polymeric chelating agents, PGMA–IDA, PGMA–IDA‐co‐methyl acrylate (MA), and PGMA–IDA‐co‐acrylamide (AAm), were also synthesized. Acid dissociation constants and stability constants of these chelating agents with Ni(II), Zn(II), and Co(II) were determined by means of potentiometric titration and ultraviolet–visible spectrophotometry, respectively. The values of K_a1 and K_a2 of all the polymeric chelating agents were smaller than those of GMA–IDA. The stability constants of all the polymeric chelating agents were larger than those of GMA–IDA. Increasing the MA content within PGMA–IDA‐co‐MA affected the stability constant only slightly. A proper molar ratio of AAm in PGMA–IDA‐co‐AAm, stability constants was 30–60 times greater than that of GMA–IDA. However, as the molar content of AAm increased, the stability constant of PGMA–IDA‐co‐AAm decreased. The results obtained in the polymer system are explained in terms of the polymer's stereo and entanglement structure, the neighboring effect, and the hydrophobic/hydrophilic nature of MA or AAm. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1986–1994, 2002     

Thermal degradation kinetics of polyethylene and silane‐crosslinked polyethylene

The thermal degradation of linear low‐density polyethylene (LLDPE) and linear low‐density silane‐crosslinked polyethylene (SXLPE) was studied. Kinetic evaluations were performed by model‐free kinetic analysis and multivariate nonlinear regression. Apparent kinetic parameters for the overall degradation were determined. The results show that the thermal stability of SXLPE was higher than that of LLDPE. Their decomposition reaction model was a single‐step process of an nth‐order reaction. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1172–1179, 2005     

Photo‐crosslinking of poly[ethene‐stat‐(methacrylic acid)] functionalised with maleimide side groups

BACKGROUND: Photo‐crosslinkable polymers are well known and commercially applied as photoresists. But so far they have not been applied as membrane materials for separation processes. They would offer certain advantages in membrane fabrication over conventional crosslinked polymer materials. Therefore, in this work, a poly[ethene‐stat‐(methacrylic acid)] (PEMAA) which is a potential membrane polymer for different separation problems was functionalised with photo‐crosslinkable maleimide side groups. RESULTS: It has been shown that PEMAA can be used as basic polymer material and a conversion with 3‐hydroxypropylmaleimide is possible in order to obtain a photo‐crosslinkable polymer. Investigation of the crosslinking mechanism was performed using stationary infrared and UV‐visible spectroscopy as well as nanosecond transient spectroscopy absorption measurements of a rotating film. Intense transient absorption of the maleimide‐esterified PEMAA occurs at 250 nm in the film pointing to maleimide anion formation and crosslinking via an ionic dimerisation mechanism. CONCLUSION: It is found that crosslinking reactions can be observed spectroscopically in situ using a maleimide‐functionalised PEMAA. Furthermore, experiments can be performed in the liquid phase (polymer in solution) as well as in the solid phase (polymer film) using a rotating polymer film sample. Maleimide anion formation and crosslinking via an ionic dimerisation mechanism can be investigated by variation of the polymer structure as well as the structure of the maleimide side groups. Copyright © 2009 Society of Chemical Industry     

Synthesis of charged linear and crosslinked maleic diester polymers with electron‐beam irradiation

Series of maleic mono‐ and diester monomers have been prepared by esterification of maleic anhydride with poly(ethylene glycol) having different molecular weights, and with n‐dodecyl alcohol. These monomers were copolymerized with 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) using different dose rates of electron‐beam irradiation ranging from 40 to 150 kGy. The synthesized copolymers were characterized by IR and ¹H NMR analysis. Their aggregation behaviour and viscometric properties in aqueous solutions were investigated. The crosslinked copolymers were prepared in aqueous acidic solutions at pH 1 or in the presence of 1% of N,N‐methylene bisacrylamide (MBA) as crosslinking agent. The final equilibrium water content and swelling capacities for the prepared hydrogels were determined in aqueous solutions at pH = 1, 6.8 and 12 at 298 K. Swelling equilibria for the prepared hydrogels were carried out in aqueous solutions of NaCl, KCl, CaCl₂, Na₂SO₄, K₂SO₄ and CaSO₄ at concentrations ranging from 1 × 10^?6 to 2 M at 298 K. © 2003 Society of Chemical Industry     

Comparative investigation of the ultraviolet stabilization of polycarbonate/poly(acrylonitrile–butadiene–styrene) with different ultraviolet absorbers

When polycarbonate (PC)/poly(acrylonitrile–butadiene–styrene) (ABS) blends are exposed to outdoor conditions, they are mainly degraded by sunlight; this is known as photodegradation. It is the ultraviolet radiation in the sunlight that is responsible for the degradation of the blend. To stabilize the blend against the harmful ultraviolet radiation, ultraviolet absorbers (UVAs) are used. In this study, three different UVAs—Tinuvin 1577 (a hydroxyphenyl triazine type), Cyasorb 5411 (a benzotriazole type), and Uvinul 3030 (a cyanoacrylate type)—were compounded with a PC/ABS blend at 240°C with a twin‐screw extruder. Accelerated aging of the compounded sample was done by an Atlas Suntest containing xenon lamp. The degradation studies were performed with ultraviolet–visible spectroscopy, attenuated total reflectance/Fourier transform infrared spectroscopy, and yellowing index measurements. The molecular weight of the compounded sample was determined by gel permeation chromatography. It was found that hydroxyphenyl triazine type UVA showed the best results for decreasing the degradation products, oxidation rate, and yellowing of the PC/ABS blend. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Effects of an oxygen‐ion beam (O+7, 100 MeV) and γ irradiation on polypyrrole films

Nanostructured polypyrrole films doped with para‐toluene sulfonic acid were prepared by an electrochemical process, and a comparative study of the effects of swift heavy ions and γ‐ray irradiation on the structural and optical properties of the polypyrrole was carried out. Oxygen‐ion (energy = 100 MeV, charge state = +7) fluence varied from 1 × 10¹⁰ to 3 × 10¹² ions/cm², and the γ dose varied from 6.8 to 67 Gy. The polymer films were characterized by X‐ray diffraction, ultraviolet–visible spectroscopy, and scanning electron microscopy. The X‐ray diffraction pattern showed that after irradiation, the crystallinity improved with increasing fluence because of an increase in the crystalline regions dispersed in an amorphous phase. The ultraviolet–visible spectra showed a shift in the absorbance edge toward higher wavelengths, which indicated a significant decrease in the band gap of the polypyrrole film after irradiation. The scanning electron microscopy study showed a systematic change in the surface of the polymer. A similar pattern was observed with the γ irradiation. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis,characterization, and comparison of self‐doped,doped, and undoped forms of polyaniline,poly(o‐anisidine), and poly[aniline‐co‐(o‐anisidine)]

Polyaniline (PANI), poly(o‐anisidine), and poly[aniline‐co‐(o‐anisidine)] were synthesized by chemical oxidative polymerization with ammonium persulfate as an oxidizing reagent in an HCl medium. The viscosities, electrical conductivity, and crystallinity of the resulting polymers (self‐doped forms) were compared with those of the doped and undoped forms. The self‐doped, doped, and undoped forms of these polymers were characterized with infrared spectroscopy, ultraviolet–visible spectroscopy, and a four‐point‐probe conductivity method. X‐ray diffraction characterization revealed the crystalline nature of the polymers. The observed decrease in the conductivity of the copolymer and poly(o‐anisidine) with respect to PANI was attributed to the incorporation of the methoxy moieties into the PANI chain. The homopolymers attained conductivity in the range of 3.97 × 10^?3 to 7.8 S/cm after doping with HCl. The conductivity of the undoped forms of the poly[aniline‐co‐(o‐anisidine)] and poly(o‐anisidine) was observed to be lower than 10^?5 J/S cm^?1. The conductivity of the studied polymer forms decreased by the doping process in the following order: self‐doped → doped → undoped. The conductivity of the studied polymers decreased by the monomer species in the following order: PANI → poly[aniline‐co‐(o‐anisidine)] → poly(o‐anisidine). All the polymer samples were largely amorphous, but with the attachment of the pendant groups of anisidine to the polymer system, the crystallinity region increased. The undoped form of poly[aniline‐co‐(o‐anisidine)] had good solubility in common organic solvents, whereas doped poly[aniline‐co‐(o‐anisidine)] was moderately crystalline and exhibited higher conductivity than the anisidine homopolymer. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Ligating behavior and metal uptake of N‐sulphonylpolyamine chelating resins anchored on polystyrene‐divinylbenzene beads

Amberlite XAD‐2 has been functionalized by coupling through –SO₂‐with ethylenediamine, propylenediamine, and diethylenetriamine to give the corresponding polyamine chelating resins I–III. The solid metallopolymer complexes of the synthesized chelating resins with Cu²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ were synthesized. The polyamine derivatives and their metal complexes were characterized by elemental analysis, spectral (IR, UV/V, and ESR), and magnetic studies. The batch equilibrium method was utilized for using the chelating polyamines for the removal of Cu⁺², Zn⁺², Cd⁺², and Pb⁺² ions from aqueous solutions at different pH values and different shaking times at room temperature. The selective extraction of Cu⁺² from a mixture of the four metal ions and the metal capacities of the chelating resins were evaluated using atomic absorption spectroscopy. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1839–1846, 2005