Polycaprolactone as a permanent plasticizer for poly(vinyl chloride)

Polycaprolactone at moderate usage levels has been determined to provide desirable modifications of both rigid and plasticized poly(vinyl chloride). In rigid PVC it effected significant improvement in melt processing as well as good modulus, tensile strength, and kerosene resistance. Impact strength was not measurably altered, but heat-distortion temperature was appreciably lowered. In flexible PVC, polycaprolactone contributed increased tensile strength and ultimate elongation, reduced volatility, and kerosene extraction. Lowering of modulus and flex temperatures were similar to conventional liquid polymeric plasticizers, but melt processability was not as good as lower-molecular-weight plasticizers.     

Synthesis and application of a natural plasticizer based on cardanol for poly(vinyl chloride)

A natural plasticizer with multifunctional groups, similar in structure to phthalates, cardanol derivatives glycidyl ether (CGE) was synthesized from cardanol by a two‐step modification process and characterized by FT‐IR, ¹HNMR, and ¹³CNMR. The resulting product was incorporated to PVC (CGE/PVC), and plasticizing effect was compared with PVC incorporated with two kinds of commercial phthalate ester plasticizers bis (2‐ethylhexyl) benzene‐1,4‐dicarboxylate (DOTP) and diisononyl phthalate (DINP). Dynamic mechanical analysis and mechanical properties testing of the plasticized PVC samples were performed in order to evaluate their flexibility, compatibility, and plasticizing efficiency. SEM was employed to produce fractured surface morphology. Thermogravimetric analysis and discoloration tests were used to characterize the thermal stabilities. Dynamic stability analysis was used to test the processability of formulations. Compared with DOTP and DINP plasticized samples, CGE/PVC has a maximum decrease of 9.27% in glass transition temperature (T_g), a maximum increase of 17.6% in the elongation at break, and a maximum increase of 31.59°C and 25.31 min in 50% weight loss (T50) and dynamic stability time, respectively. The obtained CGE also has slightly lower volatility resistance and higher exudation resistance than that of DOTP and DINP. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42465.     

Synthesis of glycidylethylhexylphthalate and its effects on poly(vinyl chloride) films as a novel plasticizer

To improve the processability and prevent the thermal degradation of poly(vinyl chloride) (PVC), various plasticizers and heat stabilizers have to be compounded. Phthalic plasticizers and metal soap stabilizers are usually used with epoxides as costabilizers. Epoxidized soybean oil (ESO), is one of the most commonly used epoxides because of its typical combined roles as a plasticizer and heat stabilizer in PVC compounds. ESO, however, sometimes causes surface contamination of PVC compounds because saturated fatty acids such as stearic and palmitic acids in soybean oil easily bleed onto the surface. In addition, some ingredients in ESO with hydroxide groups and unreacted double bonds during epoxidization also tend to increase the bleeding of ESO. This is due to their low compatibility with PVC resins. In this study, a novel plasticizer of PVC resins, glycidylethylhexylphthalate (GEHP), was synthesized, and its performance was evaluated. GEHP was designed to act as a plasticizer like normal phthalic plasticizers and to act as a heat stabilizer like ESO. Through the addition of epoxy groups in phthalic compounds, the resistance to bleeding was improved, and the plasticizing and heat‐stabilizing effects on the PVC compounds were preserved. Soft PVC films were prepared with GEHP. The mechanical properties, thermal stability, and bleeding properties of the films were investigated. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1347–1356, 2005     

Synthesis and application of a novel cardanol‐based plasticizer as secondary or main plasticizer for poly(vinyl chloride)

A novel plasticizer based on cardanol, hydrogenated cardanol glycidyl ether acetic ester containing phosphaphenanthrene group (HCGEP), was prepared and incorporated into poly(vinyl chloride) (PVC) for the first time. The molecular structure was characterized with Fourier transform infrared and ¹H NMR spectroscopies. The thermal degradation behavior and flame retardant performance of PVC films with HCGEP as secondary or main plasticizer were investigated using thermogravimetric analysis, combustion tests, limiting oxygen index tests and morphological analysis of residues. Furthermore, the mechanical properties of PVC films were examined based on the results of tensile testing. The results were compared to those of the petroleum‐based plasticizer dioctyl phthalate. With the substitution of dioctyl phthalate with HCGEP, PVC films exhibited high thermal stability and better flame retardant performance. The tensile test results showed that the addition of HCGEP could endow PVC resin with well‐balanced properties of flexibility, strength and hardness. © 2017 Society of Chemical Industry     

Synthesis of a bio-based plasticizer from vanillic acid and its effects on poly(vinyl chloride)

A new bio-based plasticizer, VA8-8, was prepared derived from vanillic acid, and its structure was verified by nuclear magnetic resonance. It was incorporated into poly(vinyl chloride) (PVC) to replace dioctyl phthalate (DOP), and its plasticizing performance was evaluated. The results indicated that VA8-8 shows good compatible with PVC resin, and has a excellent plasticizing effect for PVC. When DOP was partially or completely substituted with VA8-8, the T_g value PVC blends dropped from 34.6 to 24.3°C and the elongation at break increased from 196.4% to 301.9%, suggesting the enhanced plasticizing efficiency of plasticizer. The plasticizing mechanism was also simulated, and the interactions between VA8-8 and PVC molecules were discussed. The thermogravimetric analysis showed VA8-8 can more effectively improve the thermal stability of PVC than DOP. In addition, the migration resistance of VA8-8 was generally superior to that of DOP. Therefore, VA8-8 is a comparable to or better plasticizer than DOP, and it is a promising alternative plasticizer for PVC.     

Chlorinated atactic polypropylene as a plasticizer for poly(vinyl chloride)

Atactic polypropylene, a byproduct obtained in the manufacture of isotactic polypropylene, has been chlorinated under various reaction conditions. The chlorination reaction is reasonably fast so as to give a product of 53-43% chlorine content in 3 h. The chlorinated product has been incorporated in poly(viny1 chloride) formulations with a view to study its plasticizing activity. Generally this type of compound acts only as a secondary plasticizer; hence it has been used in combination with di(2-ethylhexyl)phthdate, a primary plasticizer. Different proportions of these two plasticizers have been added to poly(vinyl chloride) resin to obtain a series of formulations. These compounds were evaluated, and it appears that the addition of chlorinated atactic polypropylene (APPC) helps in easy processing and increases the throughput. The increasing concentration of APPC showed an upward trend in die head pressure and torque indicating an increase in melt viscosity. The results of physical properties evaluation show that APPC acts as a reinforcing agent and also imparts permanence to the plasticizers.     

Synthesis of low molecular weight poly(vinyl acetate) and its application as plasticizer

Poly(vinyl acetate), PVAc, with a degree of polymerization X_n = 10 was prepared by chain‐transfer radical polymerization using carbon tetrachloride and used as oligomeric plasticizer for commercial PVAc. However, the chlorinated chain ends cause a low thermal stability requiring mild Cl/H substitution. The product exhibits high thermal stability and excellent melt‐compounding properties. Blends of oligomeric and commercial PVAc show single glass transition temperatures which decrease with higher oligomer content and exhibit small negative deviations from Fox' linear additivity rule. This indicates plasticization and miscibility being mainly due to entropic effects. Injection‐moulded thick specimens show ductile behaviour at oligomer contents >10 wt %, while sheets with a thickness of 0.2–0.5 mm appear flexible already at 7.5 wt %. The oxygen permeability coefficients are an order of magnitude lower than those of low‐density polyethylene. Due to the sum of their properties, the plasticized sheets present a promising alternative in the preparation of barrier materials. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40226.     

Synthesis of a novel polyester plasticizer based on glyceryl monooleate and its application in poly(vinyl chloride)

The use of bio‐based polymeric plasticizers could expand the application range of plasticized poly(vinyl chloride) (PVC) materials. In this study, a novel bio‐based polyester plasticizer, poly(glutaric acid‐glyceryl monooleate) (PGAGMO), was synthesized from glutaric acid and glyceryl monooleate via a direct esterification and polycondensation route. The polyester plasticizer was characterized by gel permeation chromatography, ¹H‐nuclear magnetic resonance, and Fourier‐transform infrared spectroscopy. The plasticizing effect of PGAGMO on PVC was investigated. The melting behavior, thermal properties, and mechanical properties of PVC blends were studied. The results showed that the PGAGMO could improve the thermal stability and reduce the glass transition temperature of PVC blends; when phthalates were substituted by PGAGMO in PVC blends, the thermal degradation temperature of PVC blends increased from 251.1°C to 262.7°C, the glass transaction temperature decreased from 49.1°C to 40.2°C, the plasticized PVC blends demonstrated good compatibility, and the decrement of the torque and the melt viscosity of PVC blends were conducive to processing. All results demonstrated that the PGAGMO could partially substitute for phthalates as a potential plasticizer of PVC. J. VINYL ADDIT. TECHNOL., 22:514–519, 2016. © 2015 Society of Plastics Engineers     

Polyhedral oligomeric silsesquioxane as a novel plasticizer for poly(vinyl chloride)

This study focuses on investigating the use of polyhedral oligomeric silsesquioxanes (POSS) to plasticize poly(vinyl chloride) (PVC). Conventional organic plasticizers for PVC, such as dioctyl phthalate (DOP), are somewhat volatile, leading to plasticizer loss and unwanted deterioration of the material properties over time. Previous experimental results indicate that methacryl-POSS, which is much less volatile due to its hybrid organic-inorganic structure, has the ability to plasticize PVC. Methacryl-POSS is miscible in the PVC only up to 15 wt%, thereby limiting its suitability as a plasticizer. However, through the use of ternary compositions it is possible to increase the proportion of methacryl-POSS in PVC substantially. The T_g of appropriately formulated ternary PVC/POSS/DOP compounds can be reduced to near room temperature, and these materials exhibit desirable ductile behavior. Binary (PVC/DOP) and ternary (PVC/POSS/DOP) compounds formulated to the same T_g values showed considerably different mechanical properties. Such findings reveal the possibility of using POSS to engineer the mechanical properties of plasticized PVC.     

Preparation of epoxidized cardanol butyl ether as a novel renewable plasticizer and its application for poly(vinyl chloride)

A new type of plasticizer, epoxidized cardanol butyl ether (ECBE), was synthesized via etherification and epoxidation. Successful synthesis was confirmed from Fourier transform infrared, ¹H NMR and ¹³C NMR spectra. The obtained product was evaluated by adding it to poly(vinyl chloride) (PVC) incorporated with dioctyl phthalate (DOP). Mechanical and thermal properties of PVC blends were studied using tensile testing, thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA). Processability, migration and volatility of plasticizing systems were also investigated. Tensile tests found a maximum increase of 17.8% in elongation at break. DMA results indicated that glass transition temperature shifted to lower temperature with a maximum decrease of 5.76 °C. TGA results revealed that PVC blends with higher content of ECBE had higher thermal stability; initial degradation temperature, 50% weight loss temperature and the first peak degradation temperature increased by 15.3, 14.8 and 4.1 °C, respectively. Processing time was extended from 11.56 to 59.94 min. The plasticizing performance of migration and volatility resistance were higher than those of neat DOP. © 2016 Society of Chemical Industry     

Synthesis and evaluation of dioctyl 2,5-thiophenedicarboxylate as a potentially bio-based plasticizer for poly(vinyl chloride)

In this work, dioctyl 2,5-thiophenedicarboxylate (DOT), a potentially bio-based plasticizer, was synthesized and evaluated as an alternative to traditional petroleum-based plasticizers. The chemical structure of DOT was confirmed by FTIR and ¹H NMR. Besides, its plasticization effect on poly(vinyl chloride) (PVC) was investigated in detail, and dioctyl 2,5-furandicarboxylate (DOF) as well as dioctyl isophthalate (DOIP) with similar chemical structures were used as references. The DMA results showed that the glass transition temperature (T_g) of PVC/DOT, PVC/DOF, and PVC/DOIP was 45.1°C, 33.6°C, and 51.3°C, respectively, indicating that the plasticizing efficiency of DOT was better than that of DOIP but lower than that of DOF. However, the tensile test results exhibited that the elongation at the break of PVC/DOT was higher than that of PVC/DOF, which was attributed to the easy phase separation between DOF and PVC. In addition, DOT displayed the best volatility resistance and exudation resistance among the three plasticizers, attributed to its highest molecular weight. Moreover, the migration loss of DOT in non-polar solvents was much smaller than that of DOIP because of its stronger molecular polarity. In conclusion, DOT has good potential to replace traditional petroleum-based plasticizers and be used as a primary plasticizer for PVC.     

Synthesis of a secondary plasticizer for poly(vinyl chloride) by recycling of poly(ethylene terephthalate) bottle waste through aminolytic depolymerization

This study focuses on the synthesis and application of didecanoate of bis(3‐hydroxypropyl) terephthalamide (DD‐BHPTA) as a secondary plasticizer in poly(vinyl chloride) (PVC) compounding. DD‐BHPTA was synthesized from poly(ethylene terephthalate) bottle waste through aminolysis followed by condensation reaction with decanoic acid. Synthesized DD‐BHPTA was characterized by Fourier‐transform infrared spectroscopy, differential scanning calorimetry, and nuclear magnetic resonance. Plasticized PVC was prepared by compounding PVC in different ratios with DD‐BHPTA and dioctyl phthalate (DOP) using a two‐roll mill. This newly synthesized plasticizer completely fused with PVC. The mechanical, thermal, and rheological properties like glass transition temperature, tensile strength, % elongation, dynamic mechanical analysis, solvent resistance, accelerated ultraviolet weathering test for color stability, differential scanning calorimetry, and thermal gravimetric analysis of plasticized PVC were investigated. DD‐BHPTA along with DOP plasticizer demonstrated plasticization efficiency similar to that of DOP alone, with the same plasticizer loading. DD‐BHPTA was found to be the more efficient plasticizer when used in combination with DOP. Thus, DD‐BHPTA can be used as a secondary plasticizer for DOP and can substitute DOP up to 50% of plasticizer loading. J. VINYL ADDIT. TECHNOL., 23:152–160, 2017. © 2015 Society of Plastics Engineers     

Synthesis and application of a novel thermostable epoxy plasticizer based on levulinic acid for poly(vinyl chloride)

Epoxy bisphenol acid isooctyl ester (EBAIE) was synthesized and characterized by FTIR and H-NMR. EBAIE was used as poly(vinyl chloride) (PVC) plasticizer for the first time, and its addition amount was 30 wt% of PVC. The mechanical properties, thermal stability, compatibility, and decomposition activation energy of PVC blends were systematically studied. Compared to the commercial plasticizer-dioctyl phthalate (DOP), the tensile strength had been significantly increased from 30.64 to 45.07 MPa, while the elongation at break had little difference. The thermal stability analysis showed that the static stability time at 180°C had been extended from 40 to 300 min. The decomposition activation energy indicated that the EBAIE plasticized PVC was with a higher thermal stability. The extraction and volatility resistance of the novel plasticizer were superior to those of DOP.     

Migration resistant polymeric plasticizer for poly(vinyl chloride)

Flexible films of poly(vinyl chloride) (PVC) and linear or branched poly(butylene adipate) (PBA), synthesized from 1,4‐butanediol and adipic acid or dimethyl ester of adipic acid, were aged in an aqueous environment for 10 weeks to study how branching, molar mass, and end‐group functionality affect the leaching of polyester plasticizer from thin films. Principal component analysis was applied to reveal patterns and correlations between mechanical properties, material characteristics, and aging behavior. Introduction of branches in the polyester structure increased the miscibility between PVC and the polyester, resulting in improved mechanical properties and lower water absorption. Methyl ester end‐group in PBA polyester stabilized the polymeric plasticizer toward hydrolysis, and reduced the formation and migration of monomeric degradation products from the blends during aging in water. The combination of branched structure with methyl ester end‐groups resulted in a migration resistant polymeric plasticizer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2458–2467, 2007     

Some aspects of plasticizer migration from poly(vinyl chloride) sheets

Long-term migration data, by radioactivity measurements, are presented for the systems poly(vinyl chloride) (PVC)/labelled dioctyl phthalate (DOP)/methanol, n-propanol, or n-butanol. At equilibrium, migration levels determined exceed 85% for methanol and reveal complete removal for the higher alcohols. Migration kinetics failed to be described by the long-term Fickian approximation with a diffusion coefficient independent of concentration. Nevertheless, q_t/q_∫, where q_∫ the amount migrated at infinite time and q_t the amount lost up to time t, increases linearly with (time)^1/2/(thickness) during the initial stages of the process and then a linear also relationship appears, but with severely reduced slope. Similar data concerning the systems PVC/DOP/petroleum oils confirm the behavior observed.     

Epoxidized rice bran oil (ERBO) as a plasticizer for poly(vinyl chloride) (PVC)

With environmental and toxicity concerns becoming more critical, there are increasing efforts to remove phthalates from polymer compounds around the globe more rapidly. Phthalates can be replaced by natural products; in particular, those obtained from vegetable oils and fats. In the present study, a natural-based plasticizer, synthesized by epoxidation of non-toxic rice bran oil (RBO) with peroxy acid generated in situ has been added to poly(vinyl chloride). The influence of various reaction parameters on epoxidation was studied by investigating the reaction ratio, temperature, reaction time and stirring speed. Epoxidized rice bran oil (ERBO) obtained from an optimized reaction condition was analyzed by iodine number and oxirane content. FTIR was used to analyze epoxy group formation. Product ERBO was obtained with 82 % oxirane conversion within 3 h of reaction period. PVC sheets were formulated using a conventional plasticizer di-(octyl) phthalate and was partially replaced by synthesized ERBO. The effect of ERBO addition was tested by mechanical properties (tensile strength, modulus, elongation-at-break, shore D hardness) and compared with commercially available ESBO (epoxidized soybean oil). ERBO presented fairly good incorporation and plasticizing performance, as demonstrated by the results of mechanical properties, exudation, migration tests, thermal stability by thermogravimetric analysis, T _g values as shown by differential scanning calorimetry, replacing about 60 % of the total plasticizer.     

Blends of plasticized poly(vinyl chloride) and waste flexible poly(vinyl chloride) with waste nitrile rubber powder

Blends of poly(vinyl chloride) (PVC) with varying contents of plasticizer and finely ground powder of waste nitrile rubber rollers were prepared over a wide range of rubber contents through high‐temperature blending. The effects of rubber and plasticizer (dioctyl phthalate) content on the tensile strength, percentage elongation, impact properties, hardness, abrasion resistance, flexural crack resistance, limiting oxygen index (LOI), electrical properties, and breakdown voltage were studied. The percentage elongation, flexural crack resistance, and impact strength of blends increased considerably over those of PVC. The waste rubber had a plasticizing effect. Blends of waste plasticized PVC and waste nitrile rubber showed promising properties. The electrical properties and LOI decreased with increasing rubber and plasticizer content. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1552–1558, 2004     

Diester based on castor oil fatty acid as plasticizer for poly(vinyl chloride)

Castor oil is a renewable resource that has potential uses as an environmental friendly material for a range of applications. In recent years, much efforts have been driven to develop alternate plasticizer for medical and commodity plastics due to growing concerns about dioctyl phthalate (DOP) for flexible poly(vinyl chloride) (PVC). In this study, a bio‐based plasticizer was synthesized by a two‐step esterification reaction of castor oil fatty acid (COFA) with benzyl alcohol and octanoic acid in the presence of catalyst (dibutyl tin dilaurate). The structure of the octanoic ester (OE) was confirmed by proton nuclear magnetic resonance, Fourier transform infrared spectroscopy, acid value, and hydroxyl value. OE was used as a coplasticizer in PVC for partial replacement of DOP. The addition of OE exhibited good incorporation and plasticizing performance in the PVC sheets. Incorporation of OE resulted in good plasticizing, tensile strength, percentage elongation, exudation, thermal stability, and chemical resistance because of the presence of long carbon chains of COFA. Differential scanning calorimetry (DSC), thermogravimetric analysis, and color measurements were also performed to evaluate the effect of OE. With the increase in OE, DSC and hardness results showed marginal deviation from those obtained for DOP‐plasticized sheets. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40354.     

Emissivity values for poly(vinyl chloride) with varying plasticizer compositions

The emissivity of plasticized poly(vinly chloride) (PVC) containing varying compositions and amounts of plasticizer was investigated. The four plasticizers examined were dibutyl phthalate (DBP), dioctyl phthalate (DOP), diisodecyl phthalate (DIDP) (Phthalic acid type), and dioctyl adipate (DOA) (adipic acid type). The emmissivity of plasticized PVC film increased almost equally with the difference in the compositions between DOP and DOA. It was also clear that the emissivity of the plasticized PVC film decreased gradually with the molecular sequence length of DBP, DOP, and DIDP.