Novel Broadband Excited and Linear Red‐Emitting Ba2Y(BO3)2Cl: Ce3+, Tb3+, Eu3+ Phosphor: Luminescence and Energy Transfer

A series of Ce³⁺, Tb³⁺, Eu³⁺ tri‐doped Ba₂Y(BO₃)₂Cl red‐emitting phosphor have been synthesized by solid‐state method. The Ce³⁺→Tb³⁺→Eu³⁺ energy‐transfer scheme has been proposed to realize the sensitization of Eu³⁺ ion emission by Ce³⁺ ions. Following this energy‐transfer model, near‐UV convertible Eu³⁺‐activated red phosphors have been obtained in Ba₂Y(BO₃)₂Cl: Ce³⁺, Tb³⁺, Eu³⁺ phosphors. Energy transfers from Ce³⁺ to Tb³⁺, and Tb³⁺ to Eu³⁺, as well as corresponding energy‐transfer efficiencies are investigated. The combination of narrow‐line red emission and near‐UV broadband excitation makes Ba₂Y(BO₃)₂Cl: Ce³⁺, Tb³⁺, Eu³⁺ as a novel and efficient red phosphor for NUV LED applications.     

Luminescence properties and energy transfer investigations of Sr2B2O5:Ce3+,Tb3+ phosphors

Ce³⁺ and Tb³⁺ co-doped Sr₂B₂O₅ phosphors were synthesized by the solid-state method. X-ray diffraction (XRD) was used to characterize the phase structure. The luminescent properties of Ce³⁺ and Tb³⁺ co-doped Sr₂B₂O₅ phosphors were investigated by using the photoluminescence emission, excitation spectra and reflectance spectra, respectively. The excitation spectra indicate that this phosphor can be effectively excited by near ultraviolet (n-UV) light of 317 nm. Under the excitation of 317 nm, Sr₂B₂O₅:Ce³⁺,Tb³⁺ phosphors exhibited blue emission corresponding to the f–d transition of Ce³⁺ ions and green emission bands corresponding to the f–f transition of Tb³⁺ ions, respectively. The Reflectance spectra of the Sr₂B₂O₅:Ce³⁺,Tb³⁺ phosphors are noted that combine with Ce³⁺ and Tb³⁺ ion absorptions. Effective energy transfer occurred from Ce³⁺ to Tb³⁺ in Sr₂B₂O₅ host due to the observed spectra overlap between the emission spectrum of Ce³⁺ ion and the excitation spectrum of Tb³⁺ ion. The energy transfer efficiency from Ce³⁺ ion to Tb³⁺ ion was also calculated to be 90%. The phosphor Sr₂B₂O₅:Ce³⁺,Tb³⁺ could be considered as one of double emission phosphor for n-UV excited white light emitting diodes.     

Photoluminescence Properties of Color‐Tunable Ca3La6(SiO4)6: Ce3+, Tb3+ Phosphors

A series of newly developed color‐tunable Ca₃La₆(SiO₄)₆: Ce³⁺, Tb³⁺ phosphors were successfully prepared in this study. The crystal structures of the prepared phosphors were revealed to be hexagonal with space group P6₃/m, and the lattice parameters were evaluated via utilizing the Rietveld refinement method. Upon excitation at 288 nm, the emission spectra of Ce³⁺and Tb³⁺ ions co‐doped Ca₃La₆(SiO₄)₆ phosphors included a blue emission band and several emission lines. The blue emission band with a peak at 420 nm originated in the f–d transitions of Ce³⁺ ions, and the emission lines in the range of 450–650 nm were assigned to the ⁵D₄ → ⁷F_J (J = 6, 5, 4, 3) transitions of Tb³⁺ ions. Increasing the doping content of Tb³⁺ ions considerably strengthened Tb³⁺ emission and reduced Ce³⁺ emission owing to the energy transfer from Ce³⁺ to Tb³⁺ ions. The mechanism of the energy transfer was confirmed to be a dipole–dipole interaction. The effective energy transfer from Ce³⁺ to Tb³⁺ ions caused a color shift from purplish‐blue to yellowish‐green. Color‐tunable Ca₃La₆(SiO₄)₆: Ce³⁺, Tb³⁺ phosphors have the potential to be utilized in light‐emitting diodes with proper modulation of the amount of Tb³⁺ ions.     

White‐emitting phosphor Ba2B2O5:Ce3+, Tb3+, Sm3+: Luminescence,energy transfer,and thermal stability

A series of Ba₂B₂O₅: RE (RE=Ce³⁺/Tb³⁺/Sm³⁺) phosphors were synthesized using high‐temperature solid‐state reaction. The X‐ray diffraction (XRD), luminescent properties, and decay lifetimes are utilized to characterize the properties of the phosphors. The obtained phosphors can emit blue, green, and orange‐red light when single‐doped Ce³⁺, Tb³⁺, and Sm³⁺. The energy can transfer from Ce³⁺ to Tb³⁺ and Tb³⁺ to Sm³⁺ in Ba₂B₂O₅, but not from Ce³⁺ to Sm³⁺ in Ce³⁺ and Sm³⁺ codoped in Ba₂B₂O₅. However, the energy can transfer from Ce³⁺ to Sm³⁺ through the bridge role of Tb³⁺. We obtain white emission based on energy transfer of Ce³⁺→Tb³⁺→Sm³⁺ ions. These results reveal that Ce³⁺/Tb³⁺/Sm³⁺ can interact with each other in Ba₂B₂O₅, and Ba₂B₂O₅ may be a potential candidate host for white‐light‐emitting phosphors.     

Insight into luminescent properties,energy transfer and thermal stability of NaBa4(AlB4O9)2Cl3:Ce3+, Tb3+ phosphors

A series of Ce³⁺ and Tb³⁺ singly- and co-doped NaBa₄(AlB₄O₉)₂Cl₃ (NBAC) phosphors have been synthesized via high-temperature solid state route. The crystal structure, morphology, photoluminescent properties, thermal properties and energy transfer process between Ce³⁺ and Tb³⁺ were systematically investigated. The structure refinements indicated that the phosphors based on NBAC crystallized in P42nm polar space group in monoclinic phase. The emission color could be tuned from blue (0.1595, 0.0955) to green (0.2689, 0.4334) via changing the ratio of Ce³⁺/Tb³⁺. The energy transfer mechanism of Ce³⁺/Tb³⁺ was verified to be dipole–quadrupole interaction via the examination of decay times of Ce³⁺ based on Dexter's theory. The good thermal stability showed the intensities of Ce³⁺ at 150°C were about 66.9% and 64.88% in NBAC:0.09Ce³⁺ and NBAC:0.09Ce³⁺, 0.07Tb³⁺ of that at room temperature, and the emission intensities of Tb³⁺ remained 102.41% in NBAC:0.11Tb³⁺ and 95.22% in NBAC:0.09Ce³⁺, 0.07Tb³⁺ due to the nephelauxetic shielding effect and the highly asymmetric rigid framework structure of NBAC. The maximum external quantum efficiency (EQE) of Ce³⁺ in NBAC:0.09Ce³⁺, yTb³⁺ phosphors could reach 43.38% at y = 0.13. Overall, all the results obtained suggested that NBAC:Ce³⁺, Tb³⁺ could be a promising option for n-UV pumped phosphors.     

Color tunable Ba3Lu(PO4)3:Tb3+,Mn2+ phosphor via Tb3+→Mn2+ energy transfer for white LEDs

Series of UV excited Ba₃Lu(PO₄)₃:Tb³⁺,Mn²⁺ phosphors with tunable green to red emissions had been prepared using solid state reactions. Powder X-ray diffraction and Rietveld structure refinement were used to investigate the phase purity and crystal structure of the prepared samples. Under UV excitation, the Ba₃Lu(PO₄)₃:Tb³⁺,Mn²⁺ samples exhibited not only the typical Tb³⁺ emission peaks but also the broad emission band of Mn²⁺ ions due to the efficient Tb³⁺→Mn²⁺ energy transfer which had been verified by luminescence spectra and decay curves. Utilizing the Inokuti-Hirayama model, the Tb³⁺→Mn²⁺ energy transfer mechanism was determined to be the electronic dipole–quadrupole interaction. Moreover, the emission spectra of Ba₃Lu(PO₄)₃:0.80Tb³⁺,0.015Mn²⁺ sample at different temperatures manifested that our prepared phosphors possessed good thermal stability. The luminescence properties investigation results revealed the potential value of Ba₃Lu(PO₄)₃F:Tb³⁺,Mn²⁺ in application for UV excited phosphor converted white light emitting diodes.     

Ce3+/Tb3+-coactived NaMgBO3 phosphors toward versatile applications in white LED,FED, and optical anti-counterfeiting

Ce³⁺/Tb³⁺ co-doped NaMgBO₃ phosphors were successfully synthesized by solid-state method. Under 381 nm excitation, the cyan emission owing to the 5d → 4f of Ce³⁺ ions and green emissions arising from the ⁵D₄ → ⁷F_J (J = 6, 5, 4, and 3) transitions of Tb³⁺ ions were seen in all the phosphors. Through theoretical analysis, one knows that the energy transfer from Ce³⁺ to Tb³⁺ ions with high efficiency of 83.74% was contributed by dipole–dipole transition. Furthermore, the internal quantum efficiency of NaMgBO₃:0.01Ce³⁺,0.03Tb³⁺ phosphor was 54.28%. Compared with that of at 303 K, the emission intensity of the developed products at 423 K still kept 73%, revealing the splendid thermal stability of the studied phosphors. Through utilizing the resultant phosphors as cyan-green components, the fabricated white-LED device exhibited an excellent correlated color temperature of 2785 K, high color-rendering index of 85.73, suitable luminance efficiency of 25.00 lm/W, and appropriate color coordinate of (0.4279, 0.3617). Aside from the superior photoluminescence, the synthesized phosphors also exhibited excellent cathode-luminescence properties which were sensitive to the current and accelerating voltage. Furthermore, the NaMgBO₃:0.01Ce³⁺,0.03Tb³⁺ phosphors with multi-mode emissions were promising candidates for optical anti-counterfeiting. All the results indicated that the Ce³⁺/Tb³⁺ co-doped NaMgBO₃ phosphors were potential multi-platforms toward white-LED, field emission displays, and optical anti-counterfeiting applications.     

Energy transfer and multicolor tunable emission in single-phase Tb3+, Eu3+ co-doped Sr3La(PO4)3 phosphors

A series of green-to-red color-tunable Sr₃La(PO₄)₃:Tb³⁺, Eu³⁺ phosphors were prepared by high temperature solid-state method. The crystal structures, photoluminescence properties, fluorescence lifetimes, and energy transfer of Sr₃La(PO₄)₃:Tb³⁺, Eu³⁺ were systematically investigated in detail. The obtained phosphors show both a green emission from Tb³⁺ and a red emission from Eu³⁺ with considerable intensity under ultraviolet (UV) excitation (~377 nm). The emission colors of the phosphors can be tuned from green (0.304, 0.589) through yellow (0.401, 0.505) and eventually to red (0.557, 0.392) due to efficient Tb³⁺-Eu³⁺ energy transfer (ET). The Tb³⁺→Eu³⁺ energy transfer process was demonstrated to be quadrupole-quadrupole mechanism by Inokuti-Hirayama model, with maximum ET efficiency of 86.3%. The results indicate that the Sr₃La(PO₄)₃:Tb³⁺, Eu³⁺ phosphors might find potential applications in the field of lighting and displays.     

Tunable luminescence and energy transfer properties of MgY4Si3O13: Ce3+, Tb3+, Eu3+ phosphors

The tricolor-emitting MgY₄Si₃O₁₃: Ce³⁺, Tb³⁺, Eu³⁺ phosphors for ultraviolet-LED have been prepared via a high-temperature solid-state method. X-ray diffraction, photoluminescence emission, excitation spectra and fluorescence lifetime were utilized to characterize the structure and the properties of synthesized samples. Two different lattice sites for Ce³⁺ are occupied from the host structure and the normalized PL and PLE spectra. The emissions of single-doped Ce³⁺/Tb³⁺/Eu³⁺ are located in blue, green and red region, respectively. The energy transfer from Ce³⁺ to Tb³⁺ and from Tb³⁺ to Eu³⁺ has been validated by spectra and decay curves and the energy transfer mode from Tb³⁺ to Eu³⁺ was calculated to be electric dipole-dipole interactions. By adjusting the content of Tb³⁺ and Eu³⁺ in MgY₄Si₃O₁₃: Ce³⁺, Tb³⁺, Eu³⁺, the CIE coordinates can be changed from blue to green and eventually generate white light under UV excitation. All the results indicate that the MgY₄Si₃O₁₃: Ce³⁺, Tb³⁺, Eu³⁺ phosphors are potential candidates in the application of UV-WLEDs.     

Multicolour tunable luminescence of thermal-stable Ce3+/Tb3+/Eu3+-triactivated Ca3Gd(GaO)3(BO3)4 phosphors via Ce3+ → Tb3+ → Eu3+ energy transfer for near-UV WLEDs applications

A series of single-component blue, green and red phosphors have been fabricated based on the Ca₃Gd(GaO)₃(BO₃)₄ host through doping of the Ce³⁺/Tb³⁺/Eu³⁺ ions, and their crystal structure and photoluminescence properties have been discussed in detail. A terbium bridge model via Ce³⁺ → Tb³⁺ → Eu³⁺ energy transfer has been studied. The emission colours of the phosphors can be tuned from blue (0.1661, 0.0686) to green (0.3263, 0.4791) and eventually to red (0.5284, 0.4040) under a single 344 nm UV excitation as the result of the Ce³⁺ → Tb³⁺ → Eu³⁺ energy transfer. The energy transfer mechanisms of Ce³⁺ → Tb³⁺ and Tb³⁺ → Eu³⁺ were found to be dipole-dipole interactions. Importantly, Ca₃Gd(GaO)₃(BO₃)_4:Ce³⁺,Tb³⁺,Eu³⁺ phosphors had high internal quantum efficiency. Moreover, the study on the temperature-dependent emission spectra revealed that the Ca₃Gd(GaO)₃(BO₃)_4:Ce³⁺,Tb³⁺,Eu³⁺ phosphors possessed good thermal stability. The above results indicate that the phosphors can be applied into white light-emitting diodes as single-component multi-colour phosphors.     

Enhanced luminescence properties and energy transfer in Ce3+ and Tb3+ co-doped NaCaBO3 phosphor

A series of color-tunable NaCaBO₃: Ce³⁺, Tb³⁺ phosphors have been synthesized on the basis of efficient Ce³⁺→Tb³⁺ energy transfer. The photoluminescence emission and excitation spectra, the lifetime, and the effect of Tb³⁺ concentration are investigated in detail. The enhanced photoluminescence of Tb³⁺ with sharp emission lines could be obtained by the broad excitation band from the allowed 4f–5d absorption of Ce³⁺ ions. The intensity ratio of blue emission from Ce³⁺ and green emission from Tb³⁺ can be tuned by adjusting their concentrations. The energy transfer from Ce³⁺ to Tb³⁺ in NaCaBO₃ was found to be an electric dipole–quadrupole interaction.     

Luminescence properties and energy transfer of GdAl3(BO3)4:Ce3+, Tb3+ phosphor

Ce³⁺ and Tb³⁺ singly doped and co-doped GdAl₃(BO₃)₄ phosphors were synthesized by solid state reaction. The crystal structure, the luminescent properties, the lifetimes and the temperature-dependent luminescence characteristic of the phosphors were investigated. Through an effective energy transfer, the emission spectra of GdAl₃(BO₃)₄:Ce³⁺, Tb³⁺ phosphor contains both a broad band in the range of 330–400 nm originated from Ce³⁺ ions and a series of sharp peaks at 484, 541, 583, and 623 nm due to Tb³⁺ ions. The energy transfer from Ce³⁺ to Tb³⁺ in GdAl₃(BO₃)₄ host is demonstrated to be phonon assisted nonradiative energy transfer via a dipole–dipole interaction.     

Tuning the Color Emission of Sr2P2O7: Tb3+, Eu3+ Phosphors Based on Energy Transfer

A series of color tunable Tb³⁺‐ and Eu³⁺‐activated Sr₂P₂O₇ phosphors were synthesized by a traditional solid‐state reaction method in air atmosphere. The crystal structure, photoluminescence (PL) properties, energy transfer, thermal stability, and luminous efficiency were investigated. A series of characteristic emission of Tb³⁺ and Eu³⁺ were observed in the PL spectra and the variation in the emission intensities of the three emission peaks at around 416 nm (blue), 545 nm (green), and 593 nm (orange‐red) induced the multicolor emission evolution by tuning the Tb³⁺/Eu³⁺ content ratio. The energy‐transfer mechanism from Tb³⁺ to Eu³⁺ ion was determined to be dipole–dipole interaction, and the energy‐transfer efficiency was about 90%. The novel phosphors have excellent thermal stability in the temperature range of 77–473 K and the Commission International De L'Eclairage 1931 chromaticity coordinates of Sr₂P₂O₇: Tb³⁺, Eu³⁺ (λ_ex = 378 nm) move toward the ideal white light coordinates.     

Tunable single-phase white-light-emitting Ba2Mg(BO3)2:Ce3+, Na+, Tb3+, Eu2+ phosphor based on energy transfer

A series of white-light-emitting phosphors of single-phase Ba₂Mg(BO₃)₂:Ce³⁺, Na⁺, Tb³⁺, Eu²⁺ were synthesized by conventional solid-state reaction. The crystal structure of the host was characterized by X-ray diffraction and investigated by Rietveld refinement. Photoluminescence properties were studied in detail. The energy transfer from Ce³⁺ to Tb³⁺ in Ba₂Mg(BO₃)₂ host was investigated and demonstrated to be a resonant type via a quadrupole–quadrupole mechanism. White light with wavelength tunable was realized by coupling the emission bands peaking at 417, 543 and 626 nm attributed to Ce³⁺, Tb³⁺ and Eu²⁺, respectively. By properly tuning the relative composition of Ce³⁺(Na⁺)/Tb³⁺/Eu²⁺, optimized Commission Internationale de l׳Eclairage (CIE) chromaticity coordinates (0.363, 0.295), high color rendering index (CRI) 90 and low correlated color temperature (CCT) 3793 K were obtained from the phosphor of Ba_1.90Ce_0.04Na_0.04Eu_0.02Mg_0.94Tb_0.06(BO₃)₂ upon the excitation of 296 nm UV radiation. These results indicate that Ba₂Mg(BO₃)₂:Ce³⁺, Na⁺, Tb³⁺, Eu²⁺ phosphor has a potential application as an UV radiation down-converting phosphor in white-light-emitting diodes.     

Novel Emitting‐Color Tunable Phosphors Ba3Y2(BO3)4:Ce3+,Tb3+ with Efficient Energy Transfer for Near‐UV Light‐Emitting Diodes

This work presents the ultraviolet–visible spectroscopic properties of Ba₃Y₂(BO₃)₄:Ce³⁺,Tb³⁺ phosphors prepared by a high‐temperature solid‐state reaction. Under ultraviolet light excitation, tunable emission from the blue to yellowish‐green region was obtained by changing the doping concentration of Tb³⁺ when the content of Ce³⁺ is fixed. The efficient energy transfer process between Ce³⁺ and Tb³⁺ ions was observed and confirmed in terms of corresponding excitation and emission spectra. In addition, the energy transfer mechanism between Ce³⁺ and Tb³⁺ was proved to be dipole–dipole interaction in Ba₃Y₂(BO₃)₄:Ce³⁺,Tb³⁺ phosphor. By utilizing the principle of energy transfer and appropriate tuning of Ce³⁺/Tb³⁺ contents, Ba₃Y(BO₃)₄:Ce³⁺,Tb³⁺ phosphors can have potential application as an UV‐convertible phosphor for near‐UV excited white light‐emitting diodes.     

Tunable color emission in LaScO3:Bi3+,Tb3+,Eu3+ phosphor

LaScO₃:xBi³⁺,yTb³⁺,zEu³⁺ (x = 0 − 0.04, y = 0 − 0.05, z = 0 − 0.05) phosphors were prepared via high-temperature solid-state reaction. Phase identification and crystal structures of the LaScO₃:xBi³⁺,yTb³⁺,zEu³⁺ phosphors were investigated by X-ray diffraction (XRD). Crystal structure of phosphors was analyzed by Rietveld refinement and transmission electron microscopy (TEM). The luminescent performance of these trichromatic phosphors is investigated by diffuse reflection spectra and photoluminescence. The phenomenon of energy transfer from Bi³⁺ and Tb³⁺ to Eu³⁺ in LaScO₃:xBi³⁺,yTb³⁺,zEu³⁺ phosphors was investigated. By changing the ratio of x, y, and z, trichromatic can be obtained in the LaScO₃ host, including red, green, and blue emission with peak centered at 613, 544, and 428 nm, respectively. Therefore, two kinds of white light-emitting phosphors were obtained, LaScO₃:0.02Bi³⁺,0.05Tb³⁺,zEu³⁺ and LaScO₃:0.02Bi³⁺,0.03Eu³⁺,yTb³⁺. The energy transfer was characterized by decay times of the LaScO₃:xBi³⁺, yTb³⁺, zEu³⁺ phosphors. Moreover absolute internal QY and CIE chromatic coordinates are shown. The potential optical thermometry application of LaScO₃:Bi³⁺,Eu³⁺ was based on the temperature sensitivity of the fluorescence intensity ratio (FIR). The maximum S_a and S_r are 0.118 K⁻¹ (at 473.15 K) and 0.795% K⁻¹ (at 448.15 K), respectively. Hence, the LaScO₃:Bi³⁺,Eu³⁺ phosphor is a good material for optical temperature sensing.     

Improvement of Luminescence Properties of Blue‐to‐Red Emitting NaCaBO3: Ce3+, Mn2+ Phosphor Prepared by Sol–Gel Method

Color‐tunable phosphors NaCaBO₃: Ce³⁺, Mn²⁺ were synthesized by sol–gel (SG) and solid state (SS) method. SEM observation indicated that the microstructure of phosphor (SG) consisted of regular fine grains with an average size of about 5 μm. NaCaBO₃: Ce³⁺, Mn²⁺ showed two emission bands: one at 425 nm for Ce³⁺ and another at 610 nm for Mn²⁺. NaCaBO₃: Ce³⁺, Mn²⁺ (SG) exhibit higher energy‐transfer efficiency (90%) and higher Mn²⁺ quantum efficiency (80%) than SS samples, due to smooth surface, narrow size distribution, and improved homogeneity of sensitizer/activator ions. NaCaBO₃: Ce³⁺, Mn²⁺ exhibits blue‐to‐red tunable color by changing Ce³⁺/Mn²⁺ ratio.     

Luminescence characteristics of SrZnSO:M (M = Bi3+, Mn2+ and Tb3+) phosphors

Bi³⁺/Tb³⁺/Mn²⁺-activated SrZnSO phosphors were prepared to investigate their luminescence characteristics. The SrZnSO:Bi³⁺, SrZnSO:Mn²⁺ and SrZnSO:Tb³⁺ phosphors, excited by the NUV/blue light, show blue, orange and green emissions, respectively. The Bi³⁺ → Tb³⁺, Tb³⁺ → Mn²⁺ and Bi³⁺ → Mn²⁺ energy transfer processes take place in Bi³⁺/Tb³⁺-, Tb³⁺/Mn²⁺-, Bi³⁺/Mn²⁺- and Bi³⁺/Tb³⁺/Mn²⁺-activated SrZnSO phosphors, which result in tunable luminescence of these phosphors. The CIE coordinates were calculated on the basis of the emission spectra, and they reflect the emission color changes of phosphors. For the Bi³⁺/Tb³⁺-, Tb³⁺/Mn²⁺- and Bi³⁺/Mn²⁺- activated SrZnSO phosphors, the emission points are located in the cyan, yellow and white light regions, respectively. For the Bi³⁺/Tb³⁺/Mn²⁺-activated SrZnSO phosphors, the light is in warm white light region.     

A single‐phase,thermally stable and color-tunable white light emitting Na2Ca1-x-yCexMnyP2O7 phosphors for white light emitting diodes via energy transfer

The solid-state reaction method was used to develop a series of Na₂Ca_1-x-yCe_xMn_yP₂O₇ phosphors in an H₂–N₂ environment. The crystal structure of the pyrophosphate host, valence state of dopants (Ce, Mn), emission behavior of dopants, energy transfer mechanism, and thermal quenching behavior were thoroughly examined. Doping with Ce³⁺ and Mn²⁺ ions enhanced the photoluminescence characteristics of Na₂Ca_1-x-yCe_xMn_yP₂O₇ while having negligible effect on the host's phase purity. Under 365 nm UV light irradiation, the addition of Ce³⁺ ion in the Na₂CaP₂O₇ host revealed an asymmetric band with the typical blue emission around 415 nm and a shoulder around 455 nm. To obtain white light, Mn²⁺ ion was supplementarily substituted to the present system. When the Mn²⁺ ions concentration was elevated in the Na₂CaP₂O₇ host, the emission intensity of 560 nm peak corresponding to Mn²⁺ transition enhanced significantly at the cost of Ce³⁺ emission of 415 nm. The systematic decrease of Ce³⁺ emission intensity and corresponding increase in the Mn²⁺ intensity with the increase in Mn²⁺ concentration indicated the possibility of effective energy transfer from Ce³⁺ to Mn²⁺ ions. The obtained results indicated that energy transfer from the Ce³⁺ to Mn²⁺ ions governed by dipole-quadrupole interaction. Because of the efficient energy transfer, the blue emission from Ce³⁺ and the orange red emission of Mn²⁺ provide white light from a single host along with high value of activation energy and low thermal quenching behaviour make the present phosphors to be suitable for high-power LEDs.     

The Energy Transfer and Thermal Stability of a Blue‐Green Color Tunable K2CaP2O7:Ce3+,Tb3+ Phosphor

Novel blue‐green emitting Ce³⁺‐ and Tb³⁺‐activated K₂CaP₂O₇ (KCPO) luminescent materials were synthesized via a solid‐state reaction method. X‐ray diffraction, luminescence spectroscopy, decay time, and fluorescent thermal stability tests have been used to characterize the prepared samples. The KCPO:Ce³⁺,Tb³⁺ luminescence spectra show broad band of Ce³⁺ ions and characteristic line of Tb³⁺ ion transition (⁵D₄–⁷F₅). The color variation in the light emitting from blue to green under UV excitation can be obtained by tailoring the Tb³⁺ content in KCPO:Ce³⁺. Besides, Ce³⁺ ions obviously intensify Tb³⁺ ion emission through an effective energy transfer process, which was confirmed from decay curves. The energy transfer efficiency was determined to be 82.51%. A resonant type mechanism via the dipole–quadrupole interaction can be proposed for energy transfer. As a whole, the KCPO:Ce³⁺,Tb³⁺ phosphor exhibits excellent performance in the range from 77 to 673 K, indicating the phosphors are highly potential candidates for solid‐state lighting.