Triple NIR light excited up-conversion luminescence in lanthanide-doped BaTiO3 phosphors for anti-counterfeiting

Up-conversion luminescent (UCL) materials are excellent candidate for optical anti-counterfeiting and the exploitation of multi-wavelength NIR light triggered UC phosphors with tunable color emission is essential for reliable anti-counterfeiting technology. Herein, a series of lanthanide ions (Er³⁺, Er³⁺–Ho³⁺, and Yb³⁺–Tm³⁺) doped BaTiO₃ submicrometer particles are synthesized through a modified hydrothermal procedure. XRD and SEM measurements were carried out to identify the structure and morphology of the samples and their UCL properties under 808, 980, and 1550 nm NIR excitation are investigated. Er³⁺ singly doped sample exhibits Er³⁺ concentration-dependent and excitation wavelength-dependent emission color from green to yellow and orange. The corresponding UC mechanisms under three NIR light excitation are clarified. Pure red emission under 1550-nm excitation was obtained by introducing small amount of Ho³⁺ and the fluorescent lifetime test was used to confirm the energy transfer from Er³⁺ to Ho³⁺. In addition, Yb³⁺–Tm³⁺ co-doped sample shows intense blue emission from ¹G₄ → ³H₆ transition of Tm³⁺ under 980-nm excitation. As a proof of concept, the designed pattern using phosphors with red, green, and blue three primary color emissions under 1550, 808, and 980 nm NIR excitation was displayed to demonstrate their anti-counterfeiting application.     

Optical temperature sensor based on upconversion luminescence of Er3+ doped GdTaO4 phosphors

For the development of optical temperature sensor, a series of GdTaO₄ phosphors with various Er³⁺-doping concentrations (0, 1, 5, 10, 25, 35, 50 mol%) were synthesized by a solid-state reaction method. The monoclinic crystalline structure of the prepared samples was determined by X-ray diffraction (XRD). Under excitations of 980 and 1550 nm lasers, the multi-photon-excited green and red upconversion (UC) luminescence emissions of Er³⁺ were studied, and the critical quenching concentration of Er³⁺-doped GdTaO₄ phosphor was derived to be 25 mol%. By changing the pump power of laser, it was found that the two-photon and three-photon population processes happened for the UC emissions of Er³⁺-doped GdTaO₄ phosphors excited by 980 and 1550 nm lasers, respectively. Furthermore, based on the change of thermo-responsive green UC luminescence intensity corresponding to the ²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2 transitions of Er³⁺ with temperature, the optical temperature sensing properties of Er³⁺-doped GdTaO₄ phosphor were investigated under excitations of 980 and 1550 nm lasers by using the fluorescence intensity ratio (FIR) technique. It was obtained that the maximum absolute sensitivity (S_A) and relative sensitivity (S_R) of Er³⁺-doped GdTaO₄ phosphors are as high as 0.0041 K⁻¹ at 475 K and 0.0112 K⁻¹ at 293 K, respectively. These significant results suggest that the Er³⁺-doped GdTaO₄ phosphors are a promising candidate for optical temperature sensor.     

Dual-mode optical thermometry and multicolor anti-counterfeiting based on Bi3+/Er3+ co-activated BaGd2O4 phosphor

Here, Bi³⁺, Er³⁺ co-activated gadolinium phosphors with multimode emission properties are prepared, which can emits blue, green, and orange light under the excitation of ultraviolet, 980 and 1550 nm, respectively. Moreover, BaGd₂O₄:Bi³⁺, Er³⁺ can show multicolor luminescence under different excitation conditions, such as pump light source, ambient temperature, working current, and other factors. Based on the dynamic luminescence characteristics, the dynamic anti-counterfeiting experiments are designed based on the phosphor. At the same time, the material also shows multimode temperature sensing characteristics. Under the excitation of 980 nm laser, three strong up-conversion signals Er³⁺ ions are generated at 528 nm (²H_11/2), 555 nm (⁴S_3/2), and 668 nm (⁴F_9/2), which have different temperature dependences. Based on the fluorescence intensity ratio between thermal-coupled energy levels (²H_11/2/⁴S_3/2) and nonthermal-coupled energy levels (²H_11/2/⁴F_9/2) of Er³⁺ ions, respectively, the dual-mode temperature thermometer was constructed with high-temperature sensitivity. In addition, the fluorescence lifetime of Bi³⁺ ions also has a strong temperature dependence, which can be used as another temperature detection signal, greatly improving the stability of thermometers under harsh conditions. Therefore, the material has a bright prospect in the field of anti-counterfeiting and temperature sensing.     

La2O2SO4:RE/Yb new phosphors for near infrared to visible and near infrared upconversion luminescence (RE=Ho,Er, Tm)

The 3 new upconversion (UC) phosphors of La₂O₂SO₄:RE/Yb (RE=Ho, Er, and Tm, respectively) were derived via facile dehydration of their layered hydroxide precursors that were hydrothermally synthesized at 100°C. Rietveld XRD refinement found contracting cell dimension with decreasing RE³⁺ size, confirming the direct crystallization of solid solution. The Er³⁺ and Ho³⁺ activators both exhibited simultaneous green and red (dominant) emissions under 978‐nm near‐infrared (NIR) laser excitation (NIR‐Vis UC). Particularly, Tm³⁺ produced a Gaussian‐shaped pure NIR emission band at ~812 nm via its ³H₄ → ³H₆ transition (NIR‐NIR UC), which is highly desired for NIR biological application. Analysis of the excitation‐power dependent UC properties manifested a 3‐photon mechanism for the 3 phosphors, and the possible photon reactions leading to UC were illustrated.     

Rare earth doped double perovskite nanocrystals with controllable emission wavelength and model for high-level anti-counterfeiting

Fluorescent anti-counterfeiting technology has become one of the most commonly used anti-counterfeiting technologies because of its simple preparation, low cost and high safety. However, there are still some key technical problems to be solved in developing multi-mode and polychromatic fluorescent materials for high-level anti-counterfeiting. Herein, Yb³⁺/Er³⁺ codoped Cs₂AgIn_0.99Bi_0.01Cl₆ double perovskite nanocrystals (DPNCs) with dual-mode polychromatic emission were developed. Under the irradiation of 365 nm ultraviolet (UV) light, the DPNCs emitted a bright downshifting (DS) yellow light, which comes from the self-trapping excitons (STEs) recombination. While the DPNCs produced upconversion (UC) green fluorescence under the 980 nm laser excitation, which is attributed to the transitions of ²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2 of Er³⁺ ions. In view of its dual-mode and polychromatic fluorescence characteristics, a high-level anti-counterfeiting based on this fluorescent material is designed. Moreover, the brightness of the anti-counterfeiting pattern based on this material decreases very little after three months. These results indicated that the dual-mode and polychromatic DPNCs reported have potential application in information encryption and identity recognition.     

Multicolor upconversion emission and highly optical temperature sensing based on lanthanide-doped double perovskite Sr2LaNbO6 phosphors

Here we adopt trivalent lanthanide (Ln³⁺ = Er³⁺, Er³⁺/Ho³⁺, and Yb³⁺/Tm³⁺) doped Sr₂LaNbO₆ (SLNO) as novel upconversion luminescence (UCL) materials for achieving UCL and optical temperature sensing under 980 nm excitation. Specifically, Er³⁺ single doped Sr₂LaNbO₆ phosphors present bright high-purity green emission under the 980 nm excitation. While co-doping with the Ho³⁺ ions, the component of red emission from Er³⁺ ions increases significantly and sample show a remarkable enhancement of luminescent intensity relative to SLNO:Er³⁺ sample. The above-mentioned phosphors and Yb³⁺/Tm³⁺ co-doped phosphor (blue emission) successfully achieve high-purity trichromatic UCL and mixed white light output in the same host. Furthermore, the temperature sensing performance of the SLNO:Er³⁺/Ho³⁺ phosphor based on the fluorescence intensity ratio (FIR) is systematically studied for the first time. The temperature sensing based on the non-thermal coupling levels (NTCLs) exhibit higher sensitivity than that based on the thermal coupling levels (TCLs). The maximum absolute and relative sensitivity for ⁴F_9/2/⁴I_9/2 NTCLs reach 0.16803 K^?1 at 427 K and 0.01591 K^?1 at 641 K, respectively. Interestingly, NIR emission of ⁴I_9/2 → ⁴I_15/2 transition presents a thermal enhancement, while visible emissions show thermal quenching. These results indicate that the Ln³⁺ doped Sr₂LaNbO₆ UCL phosphors have potential applications in the fields of non-contact temperature sensors, full-color displays, and anti-counterfeiting.     

Microwave Sol–Gel Synthesis of CaGd2(MoO4)4:Er3+/Yb3+ Phosphors and Their Upconversion Photoluminescence Properties

CaGd₂(MoO₄)₄:Er³⁺/Yb³⁺ phosphors with the doping concentrations of Er³⁺ and Yb³⁺ (x = Er³⁺ + Yb³⁺, Er³⁺ = 0.05, 0.1, 0.2, and Yb³⁺ = 0.2, 0.45) have been successfully synthesized by the microwave sol–gel method, and the crystal structure refinement and upconversion photoluminescence properties have been investigated. The synthesized particles, being formed after heat‐treatment at 900°C for 16 h, showed a well‐crystallized morphology. Under the excitation at 980 nm, CaGd₂(MoO₄)₄:Er³⁺/Yb³⁺ particles exhibited strong 525 and 550‐nm emission bands in the green region and a weak 655‐nm emission band in the red region. The Raman spectrum of undoped CaGd₂(MoO₄)₄ revealed about 15 narrow lines. The strongest band observed at 903 cm^?1 was assigned to the ν₁ symmetric stretching vibration of MoO₄ tetrahedrons. The spectra of the samples doped with Er and Yb obtained under 514.5 nm excitation were dominated by Er³⁺ luminescence preventing the recording Raman spectra of these samples. Concentration quenching of the erbium luminescence at ²H_11/2→⁴I_15/2 and ⁴S_3/2→⁴I_15/2 transitions in the CaGd₂(MoO₄)₄:Er³⁺/Yb³⁺ crystal structure was established to be approximately at the 10 at.% doping level.     

Visible green upconversion luminescence of Er3+/Yb3+/Li+ co-doped CaWO4 particles

The upconversion (UC) luminescence of Li⁺/Er³⁺/Yb³⁺ co-doped CaWO₄ phosphors is investigated in detail. Single crystallized CaWO₄:Li⁺/Er³⁺/Yb³⁺ phosphor can be obtained, co-doped up to 25.0/5.0/20.0 mol% (Li⁺/Er³⁺/Yb³⁺) by solid-state reaction. Under 980 nm excitation, CaWO₄:Li⁺/Er³⁺/Yb³⁺ phosphor exhibited strong green UC emissions visible to the naked eye at 530 and 550 nm induced by the intra-4f transitions of Er³⁺ (²H_11/2,⁴S_3/2→⁴I_15/2). The optimum doping concentrations of Yb³⁺/Li⁺ for the highest UC luminescence were verified to be 10/15 mol%, and a possible UC mechanism that depends on the pumping power is discussed in detail.     

Color-tunable up-conversion emission from Yb3+/Er3+/Tm3+/Ho3+ codoped KY(MoO4)2 microcrystals based on energy transfer

Tunable up-conversion luminescent material KY(MoO₄)₂: Yb³⁺, Ln³⁺ (Ln=Er, Tm, Ho) has been synthesized by a typical hydrothermal process. Under 980 nm laser diode (LD) excitation, the emission intensity and the corresponding luminescence colors of KY(MoO₄)₂: Yb³⁺, Ln³⁺ (Ln=Er, Tm, Ho) have been investigated in detail. The energy transfer from the Yb³⁺ sensitizer to Ho³⁺, Er³⁺ and Tm³⁺ activators plays an important role in the development of color-tunable single- phased phosphors. The emission intensity keep balance through control of the Ho³⁺ co-doping concentrations, white light was experimentally shown at KY(MoO₄)₂: 20 mol% Yb³⁺, 0.8 mol% Er³⁺, 0.5 mol% Tm³⁺, 1.0 mol% Ho³⁺ phosphor with further calcination at 800 °C for 4 h under 980 nm laser excitation. The color tunability, high quality of white light and high intensity of the emitted signal make these up-conversion (UC) phosphors excellent candidates for applications in solid-state lighting.     

Bright Upconversion Emission,Increased Tc,Enhanced Ferroelectric and Piezoelectric Properties in Er‐Doped CaBi4Ti4O15 Multifunctional Ferroelectric Oxides

Er³⁺‐doped CaBi₄Ti₄O₁₅ (CBT) bismuth layer structured ferroelectric ceramics were synthesized by the solid state method. Photoluminescence (UC), dielectric, ferroelectric, and piezoelectric properties were systematically studied for the first time. The Er³⁺‐doped CBT sample showed a bright up‐conversion UC while simultaneously obtaining an increased Curie temperature (T_c), enhanced ferroelectric and piezoelectric properties. The UC properties of Er³⁺‐doped CBT were investigated as a function of Er³⁺ concentration and incident pump power. A bright green (556 nm) and a weak red (674 nm) emission bands were obtained under excitation (980 nm) at room temperature, which correspond to the transitions from ⁴S_3/2, and ⁴F_9/2 to ⁴I_15/2, respectively. The dependence of UC emission intensity on pumping power indicated that three‐photon and two‐photon processes are involved in the green and red UC emission, respectively. Studies on dielectric properties indicated that the introduction of Er increased the T_c with relatively smaller values of dielectric loss of CBT, thus making this ceramic suitable for sensor applications at higher temperatures. Ferroelectric and piezoelectric measurements showed that the Er³⁺‐doped ceramics showed an increase in remnant polarization and piezoelectric constant. As a multifunctional material, Er‐doped CBT ferroelectric oxide showed great potential in sensor, optical‐electro integration, and coupling device applications.     

Efficient near-infrared to visible and ultraviolet upconversion in polycrystalline BiOCl:Er3+/Yb3+ synthesized at low temperature

Er³⁺/Yb³⁺ co-doped BiOCl poly-crystals were synthesized by the conventional solid state method at 500 °C, which exhibited good crystalline and low phonon energy. Under 980 nm excitation, the samples showed intense red upconversion (UC) luminescence (Er³⁺: ⁴F_9/2→⁴I_15/2) as well as other four UC emission bands, including ultraviolet (UV) emission at 380 nm, violet emission at 411 nm, green UC emissions at 525 and 545 nm and near-infrared (NIR) emission between 800 and 850 nm, corresponding to the transitions of ⁴G_11/2, ²H_9/2, ²H_11/2, ⁴S_3/2 and ⁴I_9/2→⁴I_15/2 of Er³⁺, respectively. Interestingly, including the violet and green UC emissions, the red one originated a nearly three-photon process in this system, and a possible UC mechanism was proposed for the enhanced red emission.     

Splitting upconversion emission and phonon‐assisted population inversion of Ba2Y(BO3)2Cl:Yb3+, Er3+ phosphor

Upconversion (UC) peak of ⁴S_3/2→⁴I_15/2 transition of Er³⁺ is close to that of ²H_11/2→⁴I_15/2 transition. The UC emission splitting of Er³⁺ caused by coordination fields of host results in that it is difficult to confirm which transitions (⁴S_3/2→⁴I_15/2 or ²H_11/2→⁴I_15/2) are responsible for the splitting UC emission peaks. In this work, the UC luminescence peaks located at 524, 540, 551, 565, 662, 677, and 683 nm were observed in the Ba₂Y(BO₃)₂Cl:Yb³⁺, Er³⁺ phosphor upon the 980 nm excitation. The 524 and 540 nm UC emissions intensity were increased, while the 551 and 565 nm UC emissions intensity were decreased with the temperature increasing from 323 to 573 K, which is attributed to the phonon‐assisted population inversion from the ⁴S_3/2 to ²H_11/2 level. The temperature dependence of UC emission spectra demonstrated that the 524 and 540 nm UC emissions are from ²H_11/2→⁴I_15/2 transition, and 551 and 565 nm UC emissions are from the ⁴S_3/2→⁴I_15/2 transition. Temperature sensing property was characterized by the UC intensity ratio of the ²H_11/2→⁴I_15/2 transition to ⁴S_3/2→⁴I_15/2 transition. The Ba₂Y(BO₃)₂Cl:Yb³⁺,Er³⁺ phosphor has potential application as the non‐contact temperature sensor.     

Down-conversion from Er3+-Yb3+ codoped CaMoO4 phosphor: A spectral conversion to improve solar cell efficiency

The present paper focuses on near infrared (NIR) down-conversion photoluminescence (PL) properties by studying the energy transfer mechanism between Er³⁺ and Yb³⁺ in CaMoO₄:Er³⁺, Yb³⁺ phosphors. We have successfully synthesized a series of Er³⁺ doped and Yb³⁺ codoped CaMoO₄ phosphors by hydrothermal method. The down-conversion of Er³⁺-Yb³⁺ combination with CaMoO₄ phosphor is designed to overcome the energy losses due to spectral mismatch when a high energy photon is incident on the Si-solar cell. The XRD, FESEM, EDX, PL, UV–Vis, Lifetime measurements were carried out to characterize the prepared down-converting phosphors. The crystallinity and surface morphology were studied by X-ray diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM) techniques. The down-conversion PL spectra have been studied using 380 nm excitation wavelength. The Er³⁺ doped phosphors exhibit hypersensitive emission at 555 nm in the visible region due to ⁴S_3/2→⁴I_15/2 transition. The addition of Yb³⁺ into Er³⁺ doped CaMoO₄ attribute an emission at 980 nm due to ²F_5/2→²F_7/2 transition. The decrease in emission intensity in visible region and increase in NIR region reveals the energy transfer from Er³⁺ to Yb³⁺ through cross relaxation. The UV–Vis–NIR spectra shows the strong absorption peak around 1000 nm due to Yb³⁺ ion. The lifetime measurement also reveals the energy transfer from Er³⁺ to Yb³⁺ ions. The maximum value of energy transfer efficiency (ETE) and corresponding theoretical internal quantum efficiency are estimated as 74% and 174% respectively.     

Preparation,luminescence properties,and application of temperature sensing and anti-counterfeiting of La2MgTiO6:Yb3+/Ln3+/Mn4+

The doping of transition metal ions in the up-conversion (UC) luminescent material doped with Yb³⁺/Ln³⁺ is a facile way to increase their UC luminescence intensities and alter their colors. In this study, La₂MgTiO₆:Yb³⁺/Mn⁴⁺/Ln³⁺ (Ln³⁺ = Er³⁺, Ho³⁺, and Tm³⁺) phosphors showing excellent luminescence properties were prepared by a solid-state method. The sensitivity of the La₂MgTiO₆:Yb³⁺/Ln³⁺/Mn⁴⁺ phosphor was double that without Mn⁴⁺, because Mn⁴⁺ affects the UC emissions of Ln³⁺ via energy transfer between these ions. Moreover, Mn⁴⁺ also acts as a down-conversion activator, which can combine with UC ions to achieve multi-mode luminescence at different wavelengths. Under 980 nm excitation, these samples emit green light (from Er³⁺ and Ho³⁺) and blue light (from Tm³⁺). In contrast, under 365 nm excitation, they emit red light (from Mn⁴⁺). Further testing revealed that the La₂MgTiO₆:Yb³⁺/Mn⁴⁺/Ln³⁺ phosphors have potential applications in temperature sensing and anti-counterfeiting.     

Concentration effects on the upconversion luminescence in Ho3+/Yb3+ co-doped NaGdTiO4 phosphor

Ho³⁺/Yb³⁺ co-doped NaGdTiO₄ phosphors were synthesized by a solid-state reaction method. The upconversion (UC) luminescence characteristics excited by 980 nm laser diode were systematically investigated. Bright green UC emission centered at 551 nm accompanied with weak red and near infrared (NIR) UC emissions centered at 652 and 761 nm were observed. The dependence of UC emission intensity on excitation power density showed that all of green, red and NIR UC emissions are involved in two-photon process. The UC emission mechanisms were discussed in detail. Concentration dependence studies indicated that Ho³⁺ and Yb³⁺ concentrations had significant influences on UC luminescence intensity and the intensity ratio of the red UC emission to that of the green one. Rate equations were established based on the possible UC mechanisms and a theoretical formula was proposed to describe the concentration dependent UC emission. The UC luminescence properties of the presented material was evaluated by comparing with commercial NaYF₄:Er³⁺, Yb³⁺ phosphor, and our sample showed a high luminescence efficiency and good color performance, implying potential applications in a variety of fields.     

Upconversion emission,cathodoluminescence and temperature sensing behaviors of Yb3+ ions sensitized NaY(WO4)2:Er3+ phosphors

A series of Yb³⁺ ions sensitized NaY(WO₄)₂:Er³⁺ phosphors were synthesized through a solid-sate reaction method. The X-ray diffraction (XRD), upconversion (UC) emission and cathodoluminescence (CL) measurments were applied to characterize the as-prepared samples. Under the excitation of 980 nm light, bright green UC emissions corresponding to (²H_11/2,⁴S_3/2)→⁴I_15/2 transitions of Er³⁺ ions were observed and the UC emission intensities showed an upward trend with increasing the Yb³⁺ ion concentration, achieving its optimum value at 25 mol%. Furthermore, the temperature sensing behavior based on the thermally coupled levels (²H_11/2,⁴S_3/2) of Er³⁺ ions was analyzed by a fluorescence intensity ratio technique. It was found that the obtained samples can be operated in a wide temperature range of 133–773 K with a maximum sensitivity of approximately 0.0112 K⁻¹ at 515 K. Ultimately, strong CL properties were observed in NaY(WO₄)₂:0.01Er³⁺/0.25Yb³⁺ phosphors and the CL emission intensity increased gradually with the increment of accelerating voltage and filament current.     

Phase evolution,structure, and up-/down-conversion luminescence of Li6CaLa2Nb2O12:Yb3+/RE3+ phosphors (RE = Ho,Er, Tm)

Garnet-type Li₆Ca(La_0.97Yb_0.02RE_0.01)₂Nb₂O₁₂ (RE = Ho, Er, Tm) new phosphors were successfully synthesized via solid reaction at 900°C for 5 hours, whose course of phase evolution, macroscopic/local crystal structure and up-/down-conversion (UC/DC) photoluminescence were clarified. Mechanistic study and materials characterization were attained via XRD, Rietveld refinement, DTA/TG, electron microscopy (FE-SEM/TEM), and Raman/reflectance/fluorescence spectroscopies. The phosphors were shown to exhibit UC luminescence dominated by a ~ 553 nm green band (⁵F₄/⁵S₂ → ⁵I₈ transition) for Ho³⁺, a ~ 568 nm green band (⁴S_3/2 → ⁴I_15/2 transition) for Er³⁺ and a ~ 806 nm near-infrared band (³H₄ → ³H₆ transition) for Tm³⁺ under 978 nm laser excitation, with CIE chromaticity coordinates of around (0.31, 0.68), (0.38, 0.60) and (0.17, 0.24), respectively. Analysis of the pump-power dependence of UC intensity indicated that all the emissions involve a two-photon mechanism except for the ~ 486 nm blue emission of Tm³⁺ (¹G₄ → ³H₆), which requires a three-photon process. The DC luminescence of these phosphors is featured by dominant bands at ~ 553 nm for Ho³⁺ (green, ⁵F₄/⁵S₂ → ⁵I₈ transition), ~568 nm for Er³⁺ (green, ⁴S_3/2 → ⁴I_15/2 transition) and ~ 464 nm for Tm³⁺ (blue, ¹D₂ → ³F₄ transition). The UC and DC properties were also comparatively discussed.     

Enhancing upconversion luminescence and thermal sensing properties of Er/Yb co-doped oxysulfide core-shell nanocrystals

The development of noncontact thermal probe based on stable inorganic materials of trivalent lanthanide (Ln³⁺) doped phosphors with nontoxicity is of vital importance for their promising applications in bio-medical fields. Here we explore the upconversion luminescence and thermal sensing properties of Er³⁺, Yb³⁺ co-doped oxysulfide in a broad temperature range of 300-583 K. It was found that constructing an active shell with an optimum concentration of sensitizers is an efficient way to improve both the luminescent intensities and thermal sensitivity. Compared with the core-only sample, the luminescent intensity of the Y₂O₂S: Er³⁺, Yb³⁺@ Y₂O₂S: 5%Yb³⁺ sample is significantly enhanced by 12-fold at excitation of 980 nm. While further increasing the Yb³⁺ concentration in the shell activates new quenching pathways of Er³⁺ → Yb³⁺ → quencher from the core to the shell. Similar quenching mechanisms are also observed at excitation of 1550 nm. These energy transfer processes and luminescence mechanisms are verified in the fluorescence decay measurements. Furthermore, coating the core sample with an active shell doped by 10% Yb³⁺ enhances the thermal sensitivity by 30%, holding a high and stable sensitivity more than 50 × 10⁻⁴ K⁻¹ in a broad temperature range of 423-573 K at 980 nm excitation. In addition, at the much safer excitation wavelength of 1550 nm, this sample achieved the maximum sensitivity of 45 × 10⁻⁴ K⁻¹ at 503 K. Our work contributes a feasible and versatile way to promote the luminescence and thermal sensing properties of Ln³⁺-based materials, combining with the nontoxic oxysulfide host, indicating their potential applications as safe fluorescent and temperature nano-probes in bio-field.     

Dual-mode optical ratiometric thermometer based on rare earth ions doped perovskite oxides with tunable luminescence

Rare earth ions doped luminescent materials have drawn considerable attention as they can generate both upconversion and downshifting emissions. Here, the rare earth ions Pr³⁺/Er³⁺ codoped perovskite oxide Bi₄Ti₃O₁₂ is proposed as a dual-mode temperature sensor and anti-counterfeiting material based on its up/down-conversion luminescence. Under 481 nm excitation, the intensity ratio of green emission (～523 nm in Er³⁺) and red emission (～611 nm in Pr³⁺) brings about a very high absolute sensitivity (S_a) of 2% K^?1 at 568 K and a maximum relative sensitivity (S_r) of 1.03% K^?1 at 478 K in the temperature range of 298–568 K. In addition, the upconversion green emissions of Er³⁺ yield a relatively-high S_r of 1.1% K^?1 at 298 K with 980 nm excitation, which can provide self-calibration coupled with down-conversion luminescence temperature sensing mode. Besides, this phosphor also shows tunable luminous colors for the potential application in the anti-counterfeiting field under various excitation wavelengths.