Flexible poly(styrene-b-(ethylene-co-butylene)-b-styrene) nanocomposites for electromagnetic interference shielding

In this report, multiwalled carbon nanotubes (CNT) embedded poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) microspheres (CNT/SEBS) were prepared by solvent evaporation method. Reduced graphene oxide (rGO) nanosheets were used to cover the surface of CNT/SEBS microspheres. The CNT/SEBS/rGO nanocomposites with special segregated conductive network were fabricated by hot pressing these as-prepared complex microspheres. The morphology, electrical percolation threshold, electrical conductivity, and electromagnetic interference (EMI) shielding effectiveness (SE) of CNT/SEBS/rGO composites were characterized. The shielding mechanisms were discussed in detail. Analysis of electrical conductive performance shows that the electrical percolation threshold of rGO is 0.22 vol %. Results of EMI shielding test confirmed the synergistic effect between CNT and rGO. The EMI SE of the composite filled by 2.1 vol % CNT and 3.35 vol % rGO can achieve 26 dB in 8.2− 12.4 GHz (X band), which exceeds the basic requirement for commercial application (20 dB). Its reflectance coefficient (19–41%) indicates that the most part of incident electromagnetic (EM) wave energy is attenuated through absorption mechanism. This kind of absorptive EMI shielding material can be applied without serious secondary EM radiation pollution problems. The effects of filler content, molding temperature on EMI SE, and shielding mechanism were also investigated. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48542.     

Electromagnetic shielding properties of carbon‐rich chemical vapor infiltration‐prone silicon carbide matrix composites

This study focuses on the electromagnetic interference shielding effectiveness (EMI SE) of SiC nanowire/SiC ceramic composites (SiC_nw/SiC) manufactured by chemical vapor infiltration of SiC_nw aerogels with carbon‐rich SiC. The total EMI SE of a 1.0 mm thick ceramic composite specimen with density of only 2.68 g/cm³, was found to be 43‐44 dB, which indicates an excellent EM shielding capability of the ceramic composite corresponding to blocking of 99.99% of the incident EM signal. It was found that the carbon‐rich CVI‐SiC matrix possess excellent EM shielding properties, therefore, the CVI‐SiC CMCs themselves possess an excellent EM shielding property as a result of the carbon‐rich SiC matrix.     

Enhanced electromagnetic interference shielding performance of geopolymer nanocomposites by incorporating carbon nanotubes with controllable silica shell

The development of construction materials with exceptional electromagnetic interference (EMI) shielding performance is urgently needed to restrict the admittance of electromagnetic (EM) radiation. In this work, silica (SiO₂)-coated carbon nanotubes (S-CNT) with different shell thicknesses (～7, ～10, and ～15 nm) were prepared by a sol-gel method. The effect of SiO₂ shell thickness on the EMI shielding performance of the resulting geopolymer nanocomposites was studied. The coated SiO₂ shell effectively facilitated the dispersion of CNT in the geopolymer matrix due to the chemical reaction between SiO₂ and the geopolymer. The dispersability of modified CNT could be further improved by increasing the thickness of the SiO₂ shell. However, electron delocalization was hindered by the insulating SiO₂ shell. The conductive nature of CNT was restored during geopolymerization when the SiO₂ shell was thin. A high EMI shielding effectiveness (SE) of 24.2 dB was achieved for the geopolymer nanocomposite containing 5 vol% S-CNT with a thin SiO₂ shell. The value achieved was more competitive than reported composites for construction when the sample thickness and filler content were considered.     

Ti3C2Tx-coated diatom frustules-derived porous SiO2 composites with high EMI shielding and mechanical properties

Effective electromagnetic interference (EMI) shielding materials have garnered substantial interest for their efficacy in attenuating electromagnetic wave energy, ensuring data confidentiality, ensuring the operational stability of fragile electronic systems. To begin, artificially cultured diatom frustules (DF)-derived porous silica (DFPS) skeletons were constructed as templates in this study. Porous ceramics hot-pressed at 800 °C displayed a high compressive strength with a high specific surface area due to their three-dimensional (3D) multilayered and porous structures. Then, mechanically robust Ti₃C₂T_x/DFPS composites with exceptional EMI shielding performance were fabricated by immersing porous DF-based ceramics into Ti₃C₂T_x solutions and annealing in an argon environment to increase the materials’ shielding efficiency (SE). The EMI SE of composites hot-pressed at 800 °C achieved the maximum EMI SE of 43.2 dB in the X-band and a compressive strength of 67.5 MPa, establishing a hitherto unreported balance of mechanical characteristics and shielding performance. Prolonged transmission paths, multiple dissipation, scattering and reflection of electromagnetic energy were achieved using a well-maintained hierarchical porous silica framework decorated with MXene, with adsorption caused by surface MXene serving as the primary shielding mechanism for the composites. Due to their superior overall performance, MXene/DFPS EMI shielding composites have a bright future in the aircraft sector as delicate electronic device components.     

Promoting the electromagnetic interference shielding of Ti3C2Tx flakes by loading Fe3O4 nanoparticles: Insights into the performance of oligo-layers exposed to microwave interferences

This study aims to provide insights into the absorption and shielding performances of Fe₃O₄ modified oligo-layered Ti₃C₂T_x towards microwave electromagnetic interference. Oligo-layered Ti₃C₂T_x was modified by Fe₃O₄ nanoparticles (60 nm) via a facile electrostatic assembly approach at different loading rates. This composite was shown to have high dielectric constant and high permeability compared with oligo-layered Ti₃C₂T_x. The microwave electromagnetic absorbing and shielding performances were monitored through a vector network instrument with focuses on the EMI performance. The sample Ti₃C₂T_x/Fe₃O₄ with a 5:1 mass ratio of Ti₃C₂T_x to Fe₃O₄ displayed the optimized EMI shielding performance. The average SE value was 62.19 dB, and the maximum value was 68.72 dB at 18 GHz with a 2.6 mm thickness. The EMI shielding mechanism was understood based on the conductive loss, magnetic loss, dipole polarization, and multiple scattering. Results suggests that Ti₃C₂T_x/Fe₃O₄ composites are expected to be superior EMI shielding material.     

Dynamic mechanical analysis and broadband electromagnetic interference shielding characteristics of poly (vinyl alcohol)-poly (4-styrenesulfonic acid)-titanium dioxide nanoparticles based tertiary nanocomposites

ABSTRACT

Novel tertiary nanocomposite films comprising of poly (vinyl alcohol) (PVA), poly (4-styrenesulfonic acid) (PSSA) and titanium dioxide (TiO₂) nanoparticles (NP_S) were prepared using simple solvent casting method. The structural, thermal, morphological, thermo-mechanical and electromagnetic interference (EMI) shielding properties of PVA/PSSA/TiO₂ nanocomposite films were investigated. The EMI shielding effectiveness (SE) of PVA/PSSA/TiO₂ nanocomposite films in the X and Ku band was found to be 12 dB and 13 dB respectively at 25 wt% TiO₂ NPs loading. These results demonstrate the possible applications of PVA/PSSA/TiO₂ nanocomposite films as low cost, lightweight and flexible material for EMI shielding.     

Multilayer Ti3C2Tx: From microwave absorption to electromagnetic interference shielding

Ti₃C₂T_x MXene has attracted extensive attention in the field of electromagnetic (EM) protection over recent years. Multilayer Ti₃C₂T_x (M-Ti₃C₂T_x), as an intermediate product of MXene ultra-thin structure, has potential advantages in the field of EM protection. Herein, the M-Ti₃C₂T_x was obtained by HCl/LiF etching Ti₃AlC₂. The microwave absorption (MA) and electromagnetic interference (EMI) shielding performance of Ti₃AlC₂ and M-Ti₃C₂T_x were compared. The mechanism research of MA and EMI shielding indicates that the construction of local conductive network plays a leading role in the EM wave attenuation. The sample with 30% M-Ti₃C₂T_x display RL_min of ?50.26 dB, and corresponding bandwidth of 4.64 GHz at the thickness of 1.7 mm. Especially, the metastructure based on the EM parameters of M-Ti₃C₂T_x/wax exhibits ultra-wide bandwidth (15.54 GHz). Our research will provide a basis for the design of MXene-based EM protection performance.     

Highly conductive and flexible bilayered MXene/cellulose paper sheet for efficient electromagnetic interference shielding applications

In this work, a robust and flexible bilayered MXene/cellulose paper sheet with superhigh electrical conductivity was prepared via vacuum-assisted filtration and a subsequent hot-pressing process for electromagnetic interference (EMI) shielding applications. By tightly assembling few-layered MXene (f-Ti₃C₂T_x) on the cellulose substrate via hydrogen bonds, an effective and interconnected conductive network was constructed in the paper sheet, resulting in a high electrical conductivity of 774.6–5935.4 S m^?1 at various f-Ti₃C₂T_x loadings. The highly conductive MXene layer can promptly reflect a great amount of incident EM waves, a process which preceded the transmission of EM waves in the cellulose matrix. Owing to the highly efficient reflection-dominated EMI shielding mechanism, the resultant bilayered MXene/cellulose paper sheets exhibit excellent EMI shielding effectiveness of 34.9–60.1 dB and specific EMI shielding efficiency of 290.6–600.7 dB mm^?1. Moreover, the MXene/cellulose paper sheets demonstrated improved mechanical strength (up to 25.7 MPa) and flexibility due to the mechanical frame effect acted by the cellulose substrate. Consequently, the robust and flexible bilayered MXene/cellulose paper sheet is a promising candidate for application in next-generation electric devices.     

High performance EMI shielding applications of Co0.5Ni0.5CexSmyFe2-x-yO4 nanocomposite thin films

The fast development in the compact and wearable opto-electronics devices need a high-performance electromagnetic (EM) shielding materials that are shows a unique feature like lightweight and flexible in characteristics that increase the problems of electromagnetic pollution. At present technological aspects, the absorption predominant microwave shielding materials are gain the huge demand for preventing the major problems of electromagnetic interference over the modern electronic devices as well as environment. In the report we presents synthesis of multifunctional composite thin film material that adequately includes the exceptional EMI shielding, mechanical flexibility and magnetic properties of composite thin film for portable and wearable electronic devices which could be operated at GHz frequencies. The Co_0.5Ni_0.5Ce_xSm_yFe_2-x-yO₄ (denoted as CNCSF) its scanning electron microscopy (SEM) micrographs revel the fact that the samples highly agglomerated characteristics features of the prepared thin film samples, this agglomerated structure of the composite film will enhance the EMI shielding performances and strain sensing responses. Further, the prepared thin films were subjected to characterized XRD and Raman spectroscopic techniques to analyse the crystallinity and different functional groups present in the prepared thin films. By doping of samarium and cesium nanoparticles into the Co_0.5Ni_0.5Fe_2-x-yO₄ forms the superior conducting islands and enhances the dielectric and magnetic properties of the composite thin films. Owing to the improved dielectric and magnetic properties this x,y = 0.02 ferrites based thin film nanocomposite with the 0.4 mm thickness exhibit the absorption predominated outstanding electromagnetic shielding responses in the order of ?23 dB which is almost equal to 99.67% of shielding efficiency in broad band microwave frequencies. Furthermore, these material-based nanocomposite shields show exceptional stability in EMI shielding efficiency under the different mechanical stretching strains. In addition to superior excellent shielding material, this material-based nanocomposite thin film shows an exceptional strain sensing behaviour, which evident that multifunctional applications of this ferrites based thin material. Owing to the all-unique properties like light weight, flexibility, outstanding EMI-SE and excellent strain sensing behaviour, these ferrites-based material thin film could be employed in flexible and fortable electronic devices as crafty jacket on shield.     

Electromagnetic interference shielding effectiveness of hybrid multifunctional Fe3O4/carbon nanofiber composite

Electromagnetic interference shielding effectiveness (EMI SE) of multifunctional Fe₃O₄/carbon nanofiber composites in the X-band region (8.2–12.4 GHz) is studied. Here, we examine the contributing effects of various parameters such as Fe₃O₄ content, carbonization temperature and thickness on total shielding efficiency (SE_total) of different samples. The maximum EMI SE of 67.9 dB is obtained for composite of 5 wt.% Fe₃O₄ (0.7 mm thick) with the dominant shielding by absorption (SE_A) of electromagnetic radiation. The enhanced electromagnetic shielding performance of Fe₃O₄/carbon nanofiber composites is attributed to the increment of both magnetic and dielectric losses due to the incorporation of magnetite nanofiller (Fe₃O₄) in electrically conducting carbon nanofiber matrix as well as the specific nanofibrous structure of carbon nanofiber mats, which forms a higher aspect ratio structure with randomly aligned nanofibers. Furthermore, we prove that the addition of elastomeric polydimethylsiloxane (PDMS) as a coating for carbon nanofiber composite strengthens the composite structure without interfering with its electromagnetic shielding efficiency.     

Novel electromagnetic interference shielding effectiveness in the microwave band of magnetic nitrile butadiene rubber/magnetite nanocomposites

A novel nitrile butadiene rubber (NBR)/magnetite (Fe₃O₄) nanocomposite for electromagnetic interference (EMI) shielding at microwave frequency was successfully fabricated. The structural features of as-synthesized magnetite and NBR/Fe₃O₄ were examined by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The number of elastically effective chains, volume fraction of rubber, interparticle distance among conductive sites, polymer–filler interaction, and porosity of the nanocomposites were evaluated. The mechanical properties, including the tensile strength, elongation at break, and hardness, of the composites were measured. The static electrical properties, such as the electrical conductivity, carrier mobility, and number of charge carriers, as a function of magnetite content were evaluated. The interrelation between the electrical conductivity, shielding effectiveness (SE), dielectric constant, and skin depth of the composites are discussed. Finally, the EMI SE versus frequency was tested. The results reveal that an SE of 28–91 dB against EMI in the 1–12 GHz range depended on the loading of the conducting magnetite within the NBR matrix. Accordingly, these nanocomposites may used in the field of microwave absorption devices. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Roll-to-roll processable MXene-rGO-PVA composite films with enhanced mechanical properties and environmental stability for electromagnetic interference shielding

MXene films promise potential electromagnetic interference (EMI) shielding materials, but poor scalable processability, environmental instability, and weak mechanical properties severely restrict their applications. Herein, we engineer the large-area, high-performance, and compact nacre-like MXene-based composite films through cooperative co-assembly of Ti₃C₂T_X MXene and reduced graphene oxide (rGO) in the presence of polyvinyl alcohol (PVA). The resulting MXene-rGO-PVA composite films benefit from enhanced bonding strength and extra chain bridging effect of linear PVA molecules enriched with hydroxyl groups. Therefore, the composite film achieves high tensile strength (～238 MPa) and toughness (～1.72 MJ m^?3) while having high conductivity of ～32 S cm^?1. A significant EMI shielding effectiveness (41.35 dB) is also demonstrated, with an excellent absolute shielding effectiveness of ～20,200 dB cm² g^?1 at only 12-μm thickness. Moreover, due to the synergistic effect of multiple components, the composite films maintain a stable EMI shielding performance in harsh environments (sonication, hot/cold annealing, and acid solution) with mechanical properties that fluctuate only within 10% compared to the original film. More importantly, commercial polyethylene terephthalate release liner can be applied for the film coating, facilitating continuous roll-to-roll production of large-area films and future applications.     

Multiwalled carbon nanotubes–BaTiO3/silica composites with high complex permittivity and improved electromagnetic interference shielding at elevated temperature

Composites with silica matrix and mixed filler of multiwalled carbon nanotubes (MWCNTs) and BaTiO₃ powder were fabricated. Excellent uniform dispersion of MWCNTs can be obtained using a two-step mixing method. Both of the real and imaginary parts of complex permittivity increased with increasing MWCNT content and measured temperature. The electromagnetic interference (EMI) shielding results showed that the absorption mechanism is the main contribution to the total EMI shielding effectiveness (SE). Compared with the EMI SE resulting from reflection, the absorption showed more dependence on the MWCNT content, measured temperature and frequency. The total EMI SE is greater than 20 dB at 25 °C and 50 dB at 600 °C in the whole frequency range of 12.4–18 GHz with a 1.5 mm composite thickness, which suggests that the MWCNT–BaTiO₃/silica composites could be good candidates for the EMI shielding materials in the measured frequency and temperature region.     

Multiwalled carbon nanotube/cement composites with exceptional electromagnetic interference shielding properties

Multi-walled carbon nanotube (MWCNT)/portland cement(PC) composites have been fabricated to evaluate their electromagnetic interference (EMI) shielding effectiveness (SE). The results show that they can be used for the shielding of EMI in the microwave range. The incorporation of 15 wt.% MWCNTs in the PC matrix produces a SE more than 27 dB in X-band (8.2–12.4 GHz), and this SE is found to be dominated by absorption. Furthermore, the structural analysis, surface morphology and surface interaction of MWCNTs with PC matrix have been explored using XRD, SEM and X-ray photoelectron spectroscopy technique.     

Synergetic improvement in electromagnetic interference shielding characteristics of polyaniline-coated graphite oxide/γ-Fe2O3/BaTiO3 nanocomposites

Polymer nanocomposites were prepared by in situ polymerization of aniline with graphite oxide (GO), γ-Fe₂O₃, and BaTiO₃ as electromagnetic interference (EMI) shielding materials. GO, γ-Fe₂O₃, and BaTiO₃ nanoparticles were incorporated in the nanocomposites to improve the electromagnetic properties. The nanocomposites showed the significant improvement in both EMI shielding efficiency (SE) and thermal property due to the thermal conductivity of GO, the magnetic effect of γ-Fe₂O₃, and the electric effect of BaTiO₃. The EMI SE of nanocomposites was improved due to the synergetic effect of reflection and absorption of electromagnetic interference by GO, γ-Fe₂O₃, and BaTiO₃ additives.     

Highly-efficient electromagnetic interference shielding and microwave dielectric behavior of a (Bi2O3 + B2O3)-doped MWCNT/BaTiO3 ceramic nanocomposite

Microwave dielectric properties along with electromagnetic interference shielding effectiveness (EMI SE) of a multi-walled carbon nanotube (MWCNT)/barium titanate (BaTiO₃) nanocomposite are investigated in this paper. Appropriate amount of sintering additive (Bi₂O₃ +?B₂O₃) was doped into some nanocomposites to reduce the sintering temperatures. The dielectric properties of the nanocomposites with various MWCNT and sintering additive contents were evaluated at different microwave frequency ranges. It was found that the incorporation of optimized amount of (Bi₂O₃ +?B₂O₃) can give rise to significantly good dielectric properties. Results also indicated that incorporation of 6?wt% (Bi₂O₃ +?B₂O₃) into 1.5?mm-thick nanocomposite containing 8?wt% MWCNT led to an EMI SE greater than 28?dB, suggesting this novel nanocomposite as a promising candidate for microwave absorption and electromagnetic interference applications.     

CuxCo1-xFe2O4 (x = 0.33, 0.67, 1) Spinel Ferrite Nanoparticles Based Thermoplastic Polyurethane Nanocomposites with Reduced Graphene Oxide for Highly Efficient Electromagnetic Interference Shielding

Cu_xCo_1-xFe₂O₄ (x = 0.33, 0.67, 1)-reduced graphene oxide (rGO)-thermoplastic polyurethane (TPU) nanocomposites exhibiting highly efficient electromagnetic interference (EMI) shielding were prepared by a melt-mixing approach using a microcompounder. Spinel ferrite Cu_0.33Co_0.67Fe₂O₄ (CuCoF1), Cu_0.67Co_0.33Fe₂O₄ (CuCoF2) and CuFe₂O₄ (CuF3) nanoparticles were synthesized using the sonochemical method. The CuCoF1 and CuCoF2 exhibited typical ferromagnetic features, whereas CuF3 displayed superparamagnetic characteristics. The maximum value of EMI total shielding effectiveness (SE_T) was noticed to be 42.9 dB, 46.2 dB, and 58.8 dB for CuCoF1-rGO-TPU, CuCoF2-rGO-TPU, and CuF3-rGO-TPU nanocomposites, respectively, at a thickness of 1 mm. The highly efficient EMI shielding performance was attributed to the good impedance matching, conductive, dielectric, and magnetic loss. The demonstrated nanocomposites are promising candidates for a lightweight, flexible, and highly efficient EMI shielding material.     

Core@shell and sandwich-like Ti3C2Tx@Ni particles with enhanced electromagnetic interference shielding performance

Novel and highly effective electromagnetic interference (EMI) shielding materials are desirable to attenuate unwanted electromagnetic radiation or interference produced by electrical communication devices. Here, functional Ti₃C₂T_x@Ni particles with a core@shell and sandwich like structure were fabricated using the facile electroless plating technique. The core@shell structured Ti₃C₂T_x@Ni consists of a Ti₃C₂T_x core and a Ni shell. In the core, thin Ni layers are sandwiched in between Ti₃C₂T_x flakes. EMI shielding effectiveness (SE) values of Ti₃C₂T_x@Ni/wax composites increased with increasing Ti₃C₂T_x@Ni content. The average EMI SE value of 60 wt% Ti₃C₂T_x@Ni/wax composite was 43.12 dB, increased by 73% as compared with 24.93 dB for the same content of pristine Ti₃C₂T_x in wax in the frequency range 2–18 GHz. An average EMI SE of 74.14 dB was achieved in the 80 wt% Ti₃C₂T_x@Ni/wax. The enhanced EMI shielding performance should be ascribed to the synergic effect of the absorption loss of the Ti₃C₂T_x core and the magnetic loss of the Ni shell and the inner Ni layers.     

Enhanced Dielectric Constant for Efficient Electromagnetic Shielding Based on Carbon-Nanotube-Added Styrene Acrylic Emulsion Based Composite

An efficient electromagnetic shielding composite based on multiwalled carbon nanotubes (MWCNTs)-filled styrene acrylic emulsion-based polymer has been prepared in a water-based system. The MWCNTs were demonstrated to have an effect on the dielectric constants, which effectively enhance electromagnetic shielding efficiency (SE) of the composites. A low conductivity threshold of 0.23 wt% can be obtained. An EMI SE of ~28 dB was achieved for 20 wt% MWCNTs. The AC conductivity (σ _ac) of the composites, deduced from imaginary permittivity, was used to estimate the SE of the composites in X band (8.2–12.4 GHz), showing a good agreement with the measured results.     

Probing the engineered sandwich network of vertically aligned carbon nanotube–reduced graphene oxide composites for high performance electromagnetic interference shielding applications

Herein, we developed a strategy for fabrication of iron oxide infiltrated vertically aligned multiwalled carbon nanotubes (MWCNT forest) sandwiched with reduced graphene oxide (rGO) sheets network for high performance electromagnetic interference (EMI) shielding application which offers a new avenue in this area. Such engineered sandwiched network exhibits enhanced shielding effectiveness compared to conventional EMI shielding materials. This network of exotic carbons demonstrates the shielding effectiveness value more than 37 dB (>99.98% attenuation) in Ku-band (12.4–18 GHz), which is greater than the recommended limit (∼30 dB) for techno-commercial applications.