共查询到20条相似文献,搜索用时 375 毫秒
1.
分析我国岩溶地区灌注桩技术标准的相关内容及《岩溶地区灌注桩技术标准》的基本内容,重点探析本标准在岩溶地区灌注桩勘察、施工、检测方面的创新性内容。本标准为福建省岩溶地区灌注桩勘察、设计和施工提供了准则,同时进一步推动和提高了技术水平,有良好的经济价值和社会效益。 相似文献
2.
岩溶地区钻孔灌注桩施工技术 总被引:1,自引:0,他引:1
结合武汉倒口湖地区钻孔灌注桩工程实例,针对石灰岩地区岩溶发育,裂隙等复杂地质条件的特点,对施工方法、施工机械进行优化选择。介绍了岩溶地区钻孔灌注桩关健施工技术施工难点的处理,为岩溶地区钻孔灌注桩施工提供了有益的经验借鉴。 相似文献
3.
冲孔灌注桩在岩溶地区施工难度最大,在广西桂林岩溶地区某建筑工程中,根据不同的岩溶类型,采用了相应的岩溶处理方法,在基坑底部有岩石分布的情况下,孔口采取了石方爆破开挖方法。冲孔灌注桩遇溶洞时,针对不同溶洞状态采取了相应的处理措施,保证了冲孔灌注桩的质量和施工安全。 相似文献
4.
本文通过对岩溶地区冲孔灌注桩施工的一些具体工程实例进行总结,提出了冲孔灌注桩在岩溶地区施工时常见的质量问题及分析处理. 相似文献
5.
岩溶地区大直径嵌岩钻孔灌注桩的施工,关键是如何提高成孔速度和清孔质量,本文根据近年来在广西岩溶地区施工嵌岩钻孔灌注桩的工程实践,推荐一种既实用又经济的施工方法——冲击钻进成孔辅以双泵清孔法。实践表明,该方法在岩溶发育地区施工嵌岩钻孔灌注桩有许多优越性。 相似文献
6.
7.
8.
岩溶发育地区大直径嵌岩钻孔灌注桩的施工.关键是如何提高成孔速度和清孔质量.根据近年来在广西玉林岩溶地区施工嵌岩钻孔灌注桩的工程实践,推荐一种既实用又经济的施工方法——冲击钻进成孔辅以双泵清孔法。实践表明,该方法在岩溶发育地区施工嵌岩钻孔灌注桩有许多优越性。 相似文献
9.
岩溶地区因地下岩石孔隙发达,在该区域进行冲孔灌注桩施工复杂,难度大,本文就在岩溶地区进行冲孔灌注桩施工过程中可能会出现的一些质量问题进行分析,提出解决方案。 相似文献
10.
文章结合工程实例,根据岩溶地区冲孔灌注桩常见施工问题,从成孔、钢筋笼制安、清孔、混凝土灌注等工序详细阐述岩溶地区冲孔灌注桩常见施工问题产生的原因以及如何进行预防与处理,以使冲孔灌注桩质量达到预期的控制目标。 相似文献
11.
Conclusions 1. Bored-hole/cast-in-place piles 4–10 m long tend to retain a constant value of the unit bearing capacity, irrespective of soil moisture. Driven piles, and piles cast in punched holes, undergo a loss unit bearing capacity (up to 20%) as their length is increased.2. With the saturation of high-porosity collapsible soils, the unit bearing capacity of bored-hole/cast-in-situ piles up to 10 m long diminishes two to three times, on average. For cast-in-place piles installed in a punched hole, and for driven piles, this reduction ranges up to only 30%. This trend is characteristic of soil layers whose collapsibility properties diminish with depth, from 2–3% to 1–1.5%.3. The unit bearing capacity of cast-in-place piles installed in punched holes is equal to that of driven piles, both for saturated and dry soil conditions.4. Following soil compaction, the unit bearing capacity of concrete cast-in-place piles installed in punched holes is higher than for bored-hole/cast-in-place piles, in the ratio of up to 2 for slightly moistened soils and 3–3.5 for saturated soils.5. All other conditions being equal, the unit bearing capacity is greater for driven piles, and somewhat smaller (by 10–15%) for piles cast in punched holes. The smallest unit bearing capacity is observed in bored-hole/cast-in-place piles (1.5–2 times less than for driven piles).Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 4, pp. 14–15, July–August, 1979. 相似文献
12.
Equipment has been developed and tested for the installation of piles in punched holes with a diameter to 1 m in soils classed as Type II in terms of proneness to slump-type settlement. A field experiment was conducted to investigate single and grouped piles subject to prolonged wetting and slump-type settlements of the surrounding soils under their own weight. The effect of compaction of the soil around the pile on the reduction in negative-friction forces and settlement of piles in punched holes is noted. 相似文献
13.
针对在岩溶和裂隙发育的岩溶地区冲(钻)孔灌注桩施工过程中的常见事故,分析其原因,结合工程实例,介绍钢护筒护壁、压密注浆等处理措施的成功应用。 相似文献
14.
阐述了冲孔灌注桩在广州白云机场飞机滑行道桥桩基施工中的应用。详细介绍冲孔灌注桩在岩溶发育地区施工中所采用的主要技术措施;在大小不同的溶洞中采用的成孔方法、技术措施及其实施效果。 相似文献
15.
通过泉州海星安置房工程桩基施工实例,介绍填海地段有块石、弧石、流砂、卵石、夹层淤泥等复杂土层,采用大直径泥浆护壁冲孔灌注桩的成孔成桩的主要施工技术和试桩结果。 相似文献
16.
本文针对冲(钻)孔灌注桩在施工过程中产生的各种常见事故,分析其原因,并分别提出对各种事故应采取的预防和处理措施。 相似文献
17.
结合工程实例,介绍在裂隙和溶洞发育的岩溶地区,采用冲击反循环钻进、钢护筒护壁、压密注浆等工艺的冲(钻)孔灌注桩施工技术。 相似文献
18.
Behavioral characteristics of piles cast in punched holes, and also basic positions with regard to the design and installation
of these foundations are cited. 相似文献
19.
20.
结合工程实例,详细介绍了在地质情况复杂且地质勘探报告不能真实反映冲孔桩实际地质条件的情况下,对冲孔灌注桩的常见质量事故加以分析,找出质量事故发生的原因,阐述了相应的施工质量控制对策,尽可能防止质量事故的发生。 相似文献