共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
随着先进制造业不断发展,3D打印技术作为一种新兴的制造方式,可推动工业产品设计与应用。基于3D打印的手压充电筒的设计与开发,通过手绘设计出产品的外观及结构设计,基于3D打印技术、模型三维数据扫描、三维造型软件曲面重构与质量分析相结合,快速成型出产品,再将样品进行试装配,便于设计师达到客户需求,从而大大减少产品设计到成型的周期,节省产品研发成本的目的。 相似文献
3.
叶片作为航空发动机的关键部件之一,其形状的不规则性和复杂性,使得发动机叶片实体建模比一般实体复杂得多。逆向造型软件的出现为复杂形状的叶片数字化建模提供了有力的技术手段。通过三维激光扫描机对叶片的三维形状信息进行采集,然后利用逆向软件Surfacer和Geomagic Studio交互使用对所采集的数据进行处理,并在Geomagic Studio中进行曲面重构。然后通过逆向模型快速检测软件Geomagic Qualify中的叶片检测技术对重构的曲面和原始点云模型进行三维误差比较、叶片截面二维误差比较和截面二维扭曲分析,为发动机叶片的数字化设计检测提供了依据。 相似文献
4.
5.
曲面重构造型技术是整个RE技术的核心。传统的方法是通过对离散的点云进行拟合形成曲面,通过曲面裁减、延伸、拼接得到原始的CAD模型。对曲面的重构技术研究发现,对于具有过渡几何特征的点云,单纯的曲面拟合拼接并不能得到理想的CAD模型。该文针对反求工程中过渡曲面的建模方法,提出了按过渡几何特征分类,以光滑连续为曲面的过渡曲面方法。实践运用表明,运用过渡曲面造型技术得到的CAD模型光顺,更能体现造型设计意图。 相似文献
6.
7.
8.
用曲面重构实现流曲面建模是工程中的关键问题,现有的曲面重构方法只基于点云几何信息,重构曲面很难符合流体动力学定义,需要复杂的人工处理。在传统重构研究的基础上提出了结合流体速度和点云距离函数的优化模型,用曲面演化方法求解模型极值获得最终流曲面的方法。与现有方法相比,所提出的方法在保证重构几何精度的同时,可以使得重构曲面符合流线型造型的外形要求,尤其是点云中噪声、层叠和孔洞等缺陷的重构结果更为合理。应用实例和比较证明了该方法的有效性。 相似文献
9.
10.
扫描变换法和路径拉伸法通常用于螺旋弹簧的近似造型,通过分析比较,指出了两种方法的不足之处.运用解析几何方法,研究了圆截面螺旋曲面的建模方法,并建立了各种截面形状的螺旋曲面通用解析表达式.同时,进一步研究了变截面螺旋曲面的形成与建模方法,并在AutoCAD中给出了基于VisualLISP的各种截面形状螺旋面的CAD绘图技巧.结果表明,此建模方法能大大提高螺旋曲面造型的精确度. 相似文献
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
14.
15.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
16.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献
17.
V. P. Dragunov E. G. Kostsov 《Optoelectronics, Instrumentation and Data Processing》2009,45(3):234-242
Specific features of operation of one- and two-capacitor microelectromechanical converters (MEMC) of energy of mechanical microscopic vibrations into electric energy with a modulated electrode-gap magnitude and with allowance for the mutual influence of electrical and elastic forces are analyzed, and the characteristics of these two devices are compared. The main factors restricting the increase in MEMC power are demonstrated to be the effects of “collapsing” and the condition of conservation of positive rigidity of the system. Expressions for estimating the limiting MEMC parameters are derived. The possibility of electrical energy generation in the presence of “real“ sources of wide-spectrum microscopic vibrations is considered. 相似文献
18.
针对目前市场对工业设计人才的需求,本文论述了我校在工业设计教育方面的改革措施,着重介绍了我校工业设计教育在软件和硬件方面所进行的一系列的改革。 相似文献
19.
20.
本文以某些积算和双笔记录仪产品为例说明由于仪表功能设计的不合理或选型不当,影响了仪表的正常使用,制造厂和用户应关注这类问题。 相似文献