Efficient Organic Light‐Emitting Diodes based on Sublimable Charged Iridium Phosphorescent Emitters

The synthesis and characterization of two new phosphorescent cationic iridium(III) cyclometalated diimine complexes with formula [Ir( L )₂(N‐N)]⁺(PF₆^–) ( HL = (9,9‐diethyl‐7‐pyridinylfluoren‐2‐yl)diphenylamine); N‐N = 4,4′‐dimethyl‐2,2′‐bipyridine ( 1 ), 4,7‐dimethyl‐1,10‐phenanthroline ( 2 )) are reported. Both complexes are coordinated by cyclometalated ligands consisting of hole‐transporting diphenylamino (DPA)‐ and fluorene‐based 2‐phenylpyridine moieties. Structural information on these heteroleptic complexes has been obtained by using an X‐ray diffraction study of complex 2 . Complexes 1 and 2 are morphologically and thermally stable ionic solids and are good yellow phosphors at room temperature with relatively short lifetimes in both solution and solid phases. These robust iridium complexes can be thermally vacuum‐sublimed and used as phosphorescent dyes for the fabrication of high‐efficiency organic light‐emitting diodes (OLEDs). These devices doped with 5 wt % 1 can produce efficient electrophosphorescence with a maximum brightness of up to 15 610 cd m^–2 and a peak external quantum efficiency of ca. 7 % photons per electron that corresponds to a luminance efficiency of ca. 20 cd A^–1 and a power efficiency of ca. 19 lm W^–1. These results show that charged iridium(III) materials are useful alternative electrophosphors for use in evaporated devices in order to realize highly efficient doped OLEDs.     

Solution‐Processible Multi‐component Cyclometalated Iridium Phosphors for High‐Efficiency Orange‐Emitting OLEDs and Their Potential Use as White Light Sources

The synthesis and photophysical studies of several multifunctional phosphorescent iridium(III) cyclometalated complexes consisting of the hole‐transporting carbazole and fluorene‐based 2‐phenylpyridine moieties are reported. All of them are isolated as thermally and morphological stable amorphous solids. Extension of the π‐conjugation through incorporation of electron‐pushing carbazole units to the fluorene fragment leads to bathochromic shifts in the emission profile, increases the highest occupied molecular orbital levels and improves the charge balance in the resulting complexes because of the propensity of the carbazole unit to facilitate hole transport. These iridium‐based triplet emitters give a strong orange phosphorescence light at room temperature with relatively short lifetimes in the solution phase. The photo‐ and electroluminescence properties of these phosphorescent carbazolylfluorene‐functionalized metalated complexes have been studied in terms of the coordinating position of carbazole to the fluorene unit. Organic light‐emitting diodes (OLEDs) using these complexes as the solution‐processed emissive layers have been fabricated which show very high efficiencies even without the need for the typical hole‐transporting layer. These orange‐emitting devices can produce a maximum current efficiency of ～ 30 cd A^–1 corresponding to an external quantum efficiency of ～ 10 % ph/el (photons per electron) and a power efficiency of ～ 14 lm W^–1. The homoleptic iridium phosphors generally outperform the heteroleptic counterparts in device performance. The potential of exploiting these orange phosphor dyes in the realization of white OLEDs is also discussed.     

A Multifunctional Iridium‐Carbazolyl Orange Phosphor for High‐Performance Two‐Element WOLED Exploiting Exciton‐Managed Fluorescence/Phosphorescence

By attaching a bulky, inductively electron‐withdrawing trifluoromethyl (CF₃) group on the pyridyl ring of the rigid 2‐[3‐ (N‐phenylcarbazolyl)]pyridine cyclometalated ligand, we successfully synthesized a new heteroleptic orange‐emitting phosphorescent iridium(III) complex [Ir( L ₁ )₂(acac)] 1 ( HL ₁ = 5‐trifluoromethyl‐2‐[3‐(N‐phenylcarbazolyl)]pyridine, Hacac = acetylacetone) in good yield. The structural and electronic properties of 1 were examined by X‐ray crystallography and time‐dependent DFT calculations. The influence of CF₃ substituents on the optical, electrochemical and electroluminescence (EL) properties of 1 were studied. We note that incorporation of the carbazolyl unit facilitates the hole‐transporting ability of the complex, and more importantly, attachment of CF₃ group provides an access to a highly efficient electrophosphor for the fabrication of orange phosphorescent organic light‐emitting diodes (OLEDs) with outstanding device performance. These orange OLEDs can produce a maximum current efficiency of ～40 cd A^?1, corresponding to an external quantum efficiency of ～12% ph/el (photons per electron) and a power efficiency of ～24 lm W^?1. Remarkably, high‐performance simple two‐element white OLEDs (WOLEDs) with excellent color stability can be fabricated using an orange triplet‐harvesting emitter 1 in conjunction with a blue singlet‐harvesting emitter. By using such a new system where the host singlet is resonant with the blue fluorophore singlet state and the host triplet is resonant with the orange phosphor triplet level, this white light‐emitting structure can achieve peak EL efficiencies of 26.6 cd A^?1 and 13.5 lm W^?1 that are generally superior to other two‐element all‐fluorophore or all‐phosphor OLED counterparts in terms of both color stability and emission efficiency.     

Synthesis and Characterization of Red‐Emitting Iridium(III) Complexes for Solution‐Processable Phosphorescent Organic Light‐Emitting Diodes

A new series of highly efficient red‐emitting phosphorescent Ir(III) complexes, (Et‐CVz‐PhQ)₂Ir(pic‐N‐O), (Et‐CVz‐PhQ)₂Ir(pic), (Et‐CVz‐PhQ)₂Ir(acac), (EO‐CVz‐PhQ)₂Ir(pic‐N‐O), (EO‐CVz‐PhQ)₂Ir(pic), and (EO‐CVz‐PhQ)₂Ir(acac), based on carbazole (CVz)‐phenylquinoline (PhQ) main ligands and picolinic acid N‐oxide (pic‐N‐O), picolinic acid (pic), and acetylacetone (acac) ancillary ligands, are synthesized for phosphorescent organic light‐emitting diodes (PhOLEDs), and their photophysical, electrochemical, and electroluminescent (EL) properties are investigated. All of the Ir(III) complexes have high thermal stability and emit an intense red light with an excellent color purity at CIE coordinates of (0.65,0.34). Remarkably, high‐performance solution‐processable PhOLEDs were fabricated using Ir(III) complexes with a pic‐N‐O ancillary ligand with a maximum external quantum efficiency (5.53%) and luminance efficiency (8.89 cd A^?1). The novel use of pic‐N‐O ancillary ligand in the synthesis of phosphorescent materials is reported. The performance of PhOLEDs using these Ir(III) complexes correlates well with the results of density functional theory calculations.     

Harvesting Excitons Via Two Parallel Channels for Efficient White Organic LEDs with Nearly 100% Internal Quantum Efficiency: Fabrication and Emission‐Mechanism Analysis

By incorporating two phosphorescent dyes, namely, iridium(III)[bis(4,6‐difluorophenyl)‐pyridinato‐N,C²′]picolinate (FIrpic) for blue emission and bis(2‐(9,9‐diethyl‐9H‐fluoren‐2‐yl)‐1‐phenyl‐1H‐benzoimidazol‐N,C³)iridium(acetylacetonate) ((fbi)₂Ir(acac)) for orange emission, into a single‐energy well‐like emissive layer, an extremely high‐efficiency white organic light‐emitting diode (WOLED) with excellent color stability is demonstrated. This device can achieve a peak forward‐viewing power efficiency of 42.5 lm W^?1, corresponding to an external quantum efficiency (EQE) of 19.3% and a current efficiency of 52.8 cd A^?1. Systematic studies of the dopants, host and dopant‐doped host films in terms of photophysical properties (including absorption, photoluminescence, and excitation spectra), transient photoluminescence, current density–voltage characteristics, and temperature‐dependent electroluminescence spectra are subsequently performed, from which it is concluded that the emission natures of FIrpic and (fbi)₂Ir(acac) are, respectively, host–guest energy transfer and a direct exciton formation process. These two parallel pathways serve to channel the overall excitons to both dopants, greatly reducing unfavorable energy losses. It is noteworthy that the introduction of the multifunctional orange dopant (fbi)₂Ir(acac) (serving as either hole‐trapping site or electron‐transporting channel) is essential to this concept as it can make an improved charge balance and broaden the recombination zone. Based on this unique working model, detailed studies of the slight color‐shift in this WOLED are performed. It is quantitatively proven that the competition between hole trapping on orange‐dopant sites and undisturbed hole transport across the emissive layer is the actual reason. Furthermore, a calculation of the fraction of trapped holes on (fbi)₂Ir(acac) sites with voltage shows that the hole‐trapping effect of the orange dopant is decreased with increasing drive voltage, leading to a reduction of orange emission.     

Blue‐Emitting Cationic Iridium Complexes with 2‐(1H‐Pyrazol‐1‐yl)pyridine as the Ancillary Ligand for Efficient Light‐Emitting Electrochemical Cells

Two blue‐emitting cationic iridium complexes with 2‐(1H‐pyrazol‐1‐yl)pyridine (pzpy) as the ancillary ligands, namely, [Ir(ppy)₂(pzpy)]PF₆ and [Ir(dfppy)₂(pzpy)]PF₆ (ppy is 2‐phenylpyridine, dfppy is 2‐(2,4‐difluorophenyl) pyridine, and PF₆^? is hexafluorophosphate), have been prepared, and their photophysical and electrochemical properties have been investigated. In CH₃CN solutions, [Ir(ppy)₂(pzpy)]PF₆ emits blue‐green light (475 nm), which is blue‐shifted by more than 100 nm with respect to the typical cationic iridium complex [Ir(ppy)₂(dtb‐bpy)]PF₆ (dtb‐bpy is 4,4′‐di‐tert‐butyl‐2,2′‐bipyridine); [Ir(dfppy)₂(pzpy)]PF₆ with fluorine‐substituted cyclometalated ligands shows further blue‐shifted light emission (451 nm). Quantum chemical calculations reveal that the emissions are mainly from the ligand‐centered ³π–π* states of the cyclometalated ligands (ppy or dfppy). Light‐emitting electrochemical cells (LECs) based on [Ir(ppy)₂(pzpy)]PF₆ gave green‐blue electroluminescence (486 nm) and had a relatively high efficiency of 4.3 cd A^?1 when an ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate was added into the light‐emitting layer. LECs based on [Ir(dfppy)₂(pzpy)]PF₆ gave blue electroluminescence (460 nm) with CIE (Commission Internationale de L'Eclairage) coordinates of (0.20, 0.28), which is the bluest light emission for iTMCs‐based LECs reported so far. Our work suggests that using diimine ancillary ligands involving electron‐donating nitrogen atoms (like pzpy) is an efficient strategy to turn the light emission of cationic iridium complexes to the blue region.     

Electrophosphorescent Devices Based on Cationic Complexes: Control of Switch‐on Voltage and Efficiency Through Modification of Charge Injection and Charge Transport

This paper reports an analysis of the properties of polymer light‐emitting devices (PLEDs) doped with iridium complexes. Devices based on charged and neutral complexes doped into poly(vinylcarbazole) (PVK) are presented, and the role of the ions and the charge‐transport properties of the complexes are discussed. In devices with the charged complexes, the concentration of the complex is found to have a profound effect on both the switch‐on voltage and the efficiency. At higher doping concentrations the efficiency is increased and the switch‐on voltage decreased. The increase in efficiency and decrease in switch‐on voltage at higher dopant concentration are found to be due to an alternative charge transport path via the iridium dopant [Ir(bpy)]⁺ (bis(2‐phenylpyridine‐C²,N′)(2,2′‐bipyridine)iridium hexafluorophosphate). However, at lower concentrations the complex becomes an electron trap and the efficiency is reduced. The devices are found to be significantly less efficient than those with neutral complexes. This difference is attributed to the ionic content and the charge trapping properties of the charged complexes. The low efficiency of the charged‐complex‐based devices could be overcome by utilizing a hole‐blocking layer; devices with efficiencies as high as 23 cd A^–1 were obtained.     

White Organic Light‐Emitting Diodes with Evenly Separated Red,Green, and Blue Colors for Efficiency/Color‐Rendition Trade‐Off Optimization

A novel yellowish‐green triplet emitter, bis(5‐(trifluoromethyl)‐2‐p‐tolylpyridine) (acetylacetonate)iridium(III) (1), was conveniently synthesized and used in the fabrication of both monochromatic and white organic light‐emitting diodes (WOLEDs). At the optimal doping concentration, monochromatic devices based on 1 exhibit a high efficiency of 63 cd A^?1 (16.3% and 36.6 lm W^?1) at a luminance of 100 cd m^?2. By combining 1 with a phosphorescent sky‐blue emitter, bis(3,5‐difluoro‐2‐(2‐pyridyl)phenyl)‐(2‐carboxypyridyl)iridium(III) (FIrPic), and a red emitter, bis(2‐benzo[b]thiophen‐2‐yl‐pyridine)(acetylacetonate)iridium(III) (Ir(btp)₂(acac)), the resulting electrophosphorescent WOLEDs show three evenly separated main peaks and give a high efficiency of 34.2 cd A^?1 (13.2% and 18.5 lm W^?1) at a luminance of 100 cd m^?2. When 1 is mixed with a deep‐blue fluorescent emitter, 4,4′‐bis(9‐ethyl‐3‐carbazovinylene)‐1,1′‐biphenyl (BCzVBi), and Ir(btp)₂(acac), the resulting hybrid WOLEDs demonstrate a high color‐rendering index of 91.2 and CIE coordinates of (0.32, 0.34). The efficient and highly color‐pure WOLEDs based on 1 with evenly separated red, green, blue peaks and a high color‐rendering index outperform those of the state‐of‐the‐art emitter, fac‐tris(2‐phenylpyridine)iridium(III) (Ir(ppy)₃), and are ideal candidates for display and lighting applications.     

Red Phosphorescent Iridium Complex Containing Carbazole‐Functionalized β‐Diketonate for Highly Efficient Nondoped Organic Light‐Emitting Diodes

A novel red phosphorescent iridium complex containing a carbazole‐functionalized β‐diketonate, Ir(DBQ)₂(CBDK) (bis(dibenzo[f,h]quinoxalinato‐N,C²) iridium (1‐(carbazol‐9‐yl)‐5,5‐dimethylhexane‐2,4‐diketonate)) is designed, synthesized, and characterized. The electrophosphorescence properties of a nondoped device using the title complex as an emitter with a device configuration of indium tin oxide (ITO)/N,N′‐diphenyl‐N,N′‐bis(1‐naphthyl)‐1,1′‐diphenyl‐4,4′‐diamine (NPB; 20 nm)/iridium complex (20 nm)/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline (BCP; 5 nm)/tris(8‐hydroxyquinoline) (AlQ; 30 nm)/Mg_0.9Ag_0.1 (200 nm)/Ag (80 nm) are examined. The results show that the nondoped device achieves a maximum lumen efficiency as high as 3.49 lm W^–1. To understand this excellent result observed, two reference complexes Ir(DBQ)₂(acac), where acac is the acetyl acetonate anion, and Ir(DBQ)₂(FBDK), [bis(dibenzo[f,h]quinoxalinato‐N,C²) iridium (1‐(9‐methyl‐fluoren‐9‐yl)‐6,6‐dimethylheptane‐3,5‐diketonate)], have also been synthesized, and as emitters they were examined under the same device configuration. The maximum lumen efficiency of the former compound is found to be 0.26 lm W^–1 while that for the latter is 0.37 lm W^–1, suggesting that the excellent performance of Ir(DBQ)₂(CBDK) can be attributed mainly to an improved hole‐transporting property that benefits the exciton transport. In addition, a bulky diketonate group separates the emitter centers from each other, which is also important for organic light‐emitting diodes.     

Highly Efficient Red Phosphorescent OLEDs based on Non‐Conjugated Silicon‐Cored Spirobifluorene Derivative Doped with Ir‐Complexes

A novel host material containing silicon‐cored spirobifluorene derivative (SBP‐TS‐PSB), is designed, synthesized, and characterized for red phosphorescent organic light‐emitting diodes (OLEDs). The SBP‐TS‐PSB has excellent thermal and morphological stabilities and exhibits high electroluminescence (EL) efficiency as a host for the red phosphorescent OLEDs. The electrophosphorescence properties of the devices using SBP‐TS‐PSB as the host and red phosphorescent iridium (III) complexes as the emitter are investigated and these devices exhibit higher EL performances compared with the reference devices with 4,4′‐N,N′‐dicarbazole‐biphenyl (CBP) as a host material; for example, a (piq)₂Ir(acac)‐doped SBP‐TS‐PSB device shows maximum external quantum efficiency of η_ext = 14.6%, power efficiency of 10.3 lm W^?1 and Commission International de L'Eclairage color coordinates (0.68, 0.32) at J = 1.5 mA cm^?2, while the device with the CBP host shows maximum η_ext = 12.1%. These high performances can be mainly explained by efficient triplet energy transfer from the host to the guests and improved charge balance attributable to the bipolar characteristics of the spirobifluorene group.     

High efficiency yellowish green phosphorescent emitter derived from phenylbenzothienopyridine ligand

A yellowish green phosphorescent dopant derived from phenylbenzothienopyridine ligand, iridium (III) [bis(1-phenylbenzo[4,5]thieno[2,3-c]pyridinato-N,C²]picolinate. (Ir(DTNP)₂pic) was synthesized and the device performances of the Ir(DTNP)₂pic was studied. The Ir(DTNP)₂pic dopant exhibited yellowish green emission at 548 nm and showed a high quantum efficiency of 22.4% at 1000 cd/m² with a color coordinate of (0.43, 0.57) in yellowish green phosphorescent organic light-emitting diodes.     

Highly efficient phosphorescent organic light-emitting diodes using a homoleptic iridium(III) complex as a sky-blue dopant

Homoleptic triscyclometalated iridium(III) complex Ir(dbi)₃ was used as a dopant for sky blue phosphorescent organic light-emitting diodes (PHOLEDs). Its photophysical, thermal, electrochemical properties as well as the device performances were investigated. Ir(dbi)₃ exhibited high quantum yield of 0.52 in solution at room temperature. A maximum current efficiency and external quantum efficiency (EQE) of 61.5 cd A⁻¹ and 23.1% were obtained, which are the highest ever reported for blue homoleptic iridium complexes. High efficiencies of 53.5 cd A⁻¹ and 20.1% EQE were achieved even at the luminance of 1000 cd m⁻².     

Indenocarbazole based bipolar host materials for highly efficient yellow phosphorescent organic light emitting diodes

We report bipolar host materials with robust indenocarbazole and biphenyl moiety as hole-electron-transporting unit for phosphorescent yellow organic light-emitting diodes (OLEDs). New host materials demonstrated an excellent morphological stability with high glass transition temperature of 207 °C. Simultaneously, it also revealed appropriate triplet energy of about 2.6 eV for ideal triplet energy transfer to yellow phosphorescent dopant. A phosphorescent yellow OLED with new host ICBP1 (and ICBP2) and conventional yellow dopant iridium(III)bis(4-(4-t-butylphenyl)thieno[3,2-c]pyridinato-N,C2′)acetylacetonate (Ir(tptpy)₂acac) shows a low driving voltage of 3.4 (and 3.6 V) at 1000 cd/m², and maximum external quantum efficiency as high as 26.4%. Such efficient performance of phosphorescent yellow OLEDs is attributed to a good charge balance and high electron transport properties of host materials.     

Modification of Exciton Lifetime by the Metal Cathode in Phosphorescent OLEDs,and Implications on Device Efficiency and Efficiency Roll‐off Behavior

Time resolved photoluminescence and electroluminescence measurements are used to study changes in the emission characteristics of materials typically used in phosphorescent organic light emitting devices (PhOLEDs). Studies on archetypical PhOLEDs with phosphorescent material, fac‐tris(2‐phenylpyridine) iridium (Ir(ppy)₃), show that the lifetime of triplet exciton is modified when in close proximity to a metal layer. Interactions with a metal layer ～30–100 nm away, as is typically the case in PhOLEDs, result in an increase in the spontaneous emission decay rate of triplet excitons, and causes the exciton lifetime to become shorter as the distance between the phosphorescent material and the metal becomes smaller. The phenomenon, possibly the result of the confined radiation field by the metal, affects device efficiency and efficiency roll‐off behavior. The results shed the light on phenomena affecting the efficiency behavior of PhOLEDs, and provide new insights for device design that can help enhance efficiency performance.     

High Performance Polymer Electrophosphorescent Devices with tert‐Butyl Group Modified Iridium Complexes as Emitters

The synthesis and photophysical study of two novel tert‐butyl modified cyclometalated iridium(III) complexes, i.e., bis(4‐tert‐butyl‐2‐phenylbenzothiozolato‐N,C^2′) iridium(III)(acetylacetonate) [(tbt)₂Ir(acac)] and bis(4‐tert‐butyl‐1‐phenyl‐1H‐benzimidazolato‐N,C^2′) iridium(III)(acetylacetonate) [(tpbi)₂Ir(acac)], are reported, their molecular structures were characterized by ¹³C NMR, ¹H NMR, ESI‐MS, FT‐IR, and elementary analysis. Compared with their prototypes without tert‐butyl substituents [(bt)₂Ir(acac) and (pbi)₂Ir(acac)], (tbt)₂Ir(acac) and (tpbi)₂Ir(acac) both have shortened phosphorescent lifetimes[(tbt)₂Ir(acac) versus (bt)₂Ir(acac), 1.1 μs:1.8 μs; (pbi)₂Ir(acac) versus (tpbi)₂Ir(acac), 0.8 μs:1.82 μs]. Moreover, (tbt)₂Ir(acac) has much more improved phototoluminescence quantum efficiencies in CH₂Cl₂ solution, [(tbt)₂Ir(acac), 0.51; (bt)₂Ir(acac), 0.26]. Employing them as dopants, high performance double‐layer PLEDs were fabricated. The (tbt)₂Ir(acac)‐based and (tpbi)₂Ir(acac)‐based PLEDs have the maximum external quantum efficiencies of 8.71 % and 10.25 %, respectively, and high EL quantum efficiencies of 5.92 % and 7.21 % can be achieved under high driven current density of 100 mA cm^–2. PLEDs fabricated with both the two phosphors have much broadened EL spectra with FWHM of > 110 nm, which afford the feasibility to be used as dopants in white LEDs, and the best doping concentrations of the two complexes in fabrication of PLEDs were optimized.     

Manipulating Charge‐Transfer Character with Electron‐Withdrawing Main‐Group Moieties for the Color Tuning of Iridium Electrophosphors

A new and synthetically versatile strategy has been developed for the phosphorescence color tuning of cyclometalated iridium phosphors by simple tailoring of the phenyl ring of ppy (Hppy = 2‐phenylpyridine) with various main‐group moieties in [Ir(ppy‐X)₂(acac)] (X = B(Mes)₂, SiPh₃, GePh₃, NPh₂, POPh₂, OPh, SPh, SO₂Ph). This can be achieved by shifting the charge‐transfer character from the pyridyl groups in some traditional iridium ppy‐type complexes to the electron‐withdrawing main‐group moieties and these assignments were supported by theoretical calculations. This new color tuning strategy in Ir^III‐based triplet emitters using electron‐withdrawing main‐group moieties provides access to Ir^III phosphors with improved electron injection/electron transporting features essential for highly efficient, color‐switchable organic light‐emitting diodes (OLEDs). The present work furnished OLED colors spanning from bluish‐green to red (505–609 nm) with high electroluminescence efficiencies which have great potential for application in multicolor displays. The maximum external quantum efficiency of 9.4%, luminance efficiency of 10.3 cd A⁻¹ and power efficiency of 5.0 lm W⁻¹ for the red OLED (X = B(Mes)₂), 11.1%, 35.0 cd A⁻¹, and 26.8 lm W⁻¹ for the bluish‐green device (X = OPh), 10.3%, 36.9 cd A⁻¹, and 28.6 lm W⁻¹ for the bright green device (X = NPh₂) as well as 10.7%, 35.1 cd A⁻¹, and 23.1 lm W⁻¹ for the yellow‐emitting device (X = SO₂Ph) can be obtained.     

Multifunctional Crosslinkable Iridium Complexes as Hole Transporting/Electron Blocking and Emitting Materials for Solution‐Processed Multilayer Organic Light‐Emitting Diodes

Here, a new series of crosslinkable heteroleptic iridium (III) complexes for use in solution processed phosphorescent organic light emitting diodes (OLEDs) is reported. These iridium compounds have the general formula of (PPZ‐VB)₂Ir(CˆN), where PPZ‐VB is phenylpyrazole (PPZ) vinyl benzyl (VB) ether; and the CˆN ligands represent a family of four different cyclometallating ligands including 1‐phenylpyrazolyl (PPZ) (1), 2‐(4,6‐difluorophenyl)pyridyl (DFPPY) (2), 2‐(p‐tolyl)pyridyl (TPY) (3), and 2‐phenylquinolyl (PQ) (4). With the incorporation of two crosslinkable VB ether groups, these compounds can be fully crosslinked after heating at 180 °C for 30 min. The crosslinked films exhibit excellent solvent resistance and film smoothness which enables fabrication of high‐performance multilayer OLEDs by sequential solution processing of multiple layers. Furthermore, the photophysical properties of these compounds can be easily controlled by simply changing the cyclometallating CˆN ligand in order to tune the triplet energy within the range of 3.0–2.2 eV. This diversity makes these materials not only suitable for use in hole transporting and electron blocking but also as emissive layers of several colors. Therefore, these compounds are applied as effective materials for all‐solution processed OLEDs with (PPZ‐VB)₂IrPPZ (1) acting as hole transporting and electron blocking layer and host material, as well as three other compounds, (PPZ‐VB)₂IrDFPPY ( 2 ), (PPZ‐VB)₂IrTPY(3), and (PPZ‐VB)₂IrPQ( 4 ), used as crosslinkable phosphorescent emitters.     

Highly Efficient,Solution‐Processed,Single‐Layer,Electrophosphorescent Diodes and the Effect of Molecular Dipole Moment

A new family of highly soluble electrophosphorescent dopants based on a series of tris‐cyclometalated iridium(III) complexes (1–4) of 2‐(carbazol‐3‐yl)‐4/5‐R‐pyridine ligands with varying molecular dipole strengths have been synthesized. Highly efficient, solution‐processed, single‐layer, electrophosphorescent diodes utilizing these complexes have been prepared and characterized. The high triplet energy poly(9‐vinylcarbazole) PVK is used as a host polymer doped with 2‐(4‐biphenylyl)‐5‐(4‐tert‐butyl‐phenyl)‐1,3,4‐oxadiazole (PBD) for electron transport. Devices with a current efficiency of 40 cd A^?1 corresponding to an EQE of 12% can thus be achieved. The effect of the type and position of the substituent (electron‐withdrawing group (CF₃) and electron‐donating group (OMe)) on the molecular dipole moment of the complexes has been investigated. A correlation between the absorption strength of the singlet metal‐to‐ligand charge‐transfer (¹MLCT) transition and the luminance spectral red shift as a function of solvent polarity is observed. The strength of the transition dipole moments for complexes 1–4 has also been obtained from TD‐DFT computations, and is found to be consistent with the observed molecular dipole moments of these complexes. The relatively long lifetime of the excitons of the phosphorescence (microseconds) compared to the charge‐carrier scattering time (less than nanoseconds), allows the transition dipole moment to be considered as a “quasi permanent dipole”. Therefore, the carrier mobility is sufficiently affected by the long‐lived transition dipole moments of the phosphorescent molecules, which are randomly oriented in the medium. The dopant dipoles cause positional and energetic disorder because of the locally modified polarization energy. Furthermore, the electron‐withdrawing group CF₃ induces strong carrier dispersion that enhances the electron mobility. Therefore, the strong transition dipole moment in complexes 3 and 4 perturbs both electron and hole mobilities, yielding a reduction in exciton formation and an increase in the device dark current, thereby decreasing the device efficiency.     

Optimization of Orange‐Emitting Electrophosphorescent Copolymers for Organic Light‐Emitting Diodes

Orange‐emitting phosphorescent copolymers containing iridium complexes and bis(carbazolyl)fluorene groups in their side chains are employed as the emissive layer in multilayer organic light‐emitting diodes (OLEDs). The efficiency of the OLED devices is optimized by varying characteristics of the copolymers: the molecular weight, the iridium loading level, and the nature and length of the linker between the side chains and the polymer backbone. A maximum efficiency of 4.9 ± 0.4%, 8.8 ± 0.7 cd A⁻¹ at 100 cd m⁻² is achieved with an optimized copolymer.     

Versatile,Benzimidazole/Amine‐Based Ambipolar Compounds for Electroluminescent Applications: Single‐Layer,Blue, Fluorescent OLEDs,Hosts for Single‐Layer,Phosphorescent OLEDs

A series of compounds containing arylamine and 1,2‐diphenyl‐1H‐benz[d]imidazole moieties are developed as ambipolar, blue‐emitting materials with tunable blue‐emitting wavelengths, tunable ambipolar carrier‐transport properties and tunable triplet energy gaps. These compounds possess several novel properties: (1) they emit in the blue region with high quantum yields; (2) they have high morphological stability and thermal stability; (3) they are capable of ambipolar carrier transport; (4) they possess tunable triplet energy gaps, suitable as hosts for yellow‐orange to green phosphors. The electron and hole mobilities of these compounds lie in the range of 0.68–144 × 10^?6 and 0.34–147 × 10^?6 cm² V^?1 s^?1, respectively. High‐performance, single‐layer, blue‐emitting, fluorescent organic light‐emitting diodes (OLEDs) are achieved with these ambipolar materials. High‐performance, single‐layer, phosphorescent OLEDs with yellow‐orange to green emission are also been demonstrated using these ambipolar materials, which have different triplet energy gaps as the host for yellow‐orange‐emitting to green‐emitting iridium complexes. When these ambipolar, blue‐emitting materials are lightly doped with a yellow‐orange‐emitting iridium complex, white organic light‐emitting diodes (WOLEDs) can be achieved, as well by the use of the incomplete energy transfer between the host and the dopant.