Long‐term water uptake behavior of lignocellulosic‐high density polyethylene composites

Composites of different lignocellulosic materials and high‐density polyethylene were prepared and their long‐term water absorption behaviors were studied. Wood flour, rice hulls, newsprint fibers, and kenaf fibers were mixed with the polymer at 25 and 50 wt % fiber contents and 1 and 2% compatibilizer, respectively. Water absorption tests were carried out on injection‐molded specimens at room temperature for five weeks. Results indicated a significant difference among different natural fibers with kenaf fibers and newsprint fibers exhibiting the highest and wood flour and rice hulls the lowest water absorption values, respectively. Very little difference was observed between kenaf fiber and newsprint composites and between rice hulls and wood flour composites regarding their water uptake behavior. The difference between 25 and 50% fiber contents for all composite formulations increased at longer immersion times, especially for the composites with higher water absorption. Kenaf fiber composites containing 50% kenaf fibers exhibited the highest water diffusion coefficient. A strong correlation was found between the water absorption and holocellulose content of the composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3907–3911, 2006     

Effect of fiber content and type,compatibilizer, and heating rate on thermogravimetric properties of natural fiber high density polyethylene composites

Natural fiber polyethylene composites containing kenaf fibers, wood flour, newsprint, and rice hulls at 25 and 50% (by weight) fiber content were sampled and studied using thermogravimetric analysis (TGA). The effects of fiber type and content, compatibilizer and heating rate on the thermal stability and degradation of the composites were evaluated. Among different natural fibers, kenef fibers were found to be the least thermally stable ones whereas newsprint fibers proved to be the most stable fibers in composite formulations. Composites containing higher amounts of natural fiber degraded at a higher rate and exhibited higher weight loss. The presence of the compatibilizer resulted in composites with slower thermal degradation. Heating rate increased both temperature and rate of main degradation peaks. FTIR and DSC results are also presented to discuss phenomena leading to thermal degradation. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers.     

Effect of natural fibers on thermal and mechanical properties of natural fiber polypropylene composites studied by dynamic mechanical analysis

The present study deals with the effects of natural fibers on thermal and mechanical properties of natural fiber polypropylene composites using dynamic mechanical analysis. Composites of polypropylene and various natural fibers including kenaf fibers, wood flour, rice hulls, and newsprint fibers were prepared at 25 and 50% (by weight) fiber content levels. One and two percent maleic anhydride grafted polypropylene was also used as the compatibilizer for composites containing 25 and 50% fibers, respectively. Specimens for dynamic mechanical analysis tests were cut out of injection‐molded samples and were tested over a temperature range of ?60 to +120°C. Frequency of the oscillations was fixed at 1 Hz and the strain amplitude was 0.1%, which was well within the linear viscoelastic region. The heating rate was 2°C/min for all temperature scan tests. Storage modulus (E′), loss modulus (E″), and mechanical loss factor (tan δ) were collected during the test and were plotted versus temperature. An increase in storage and loss moduli and a decrease in the mechanical loss factor were observed for all composites indicating more elastic behavior of the composites as compared with the pure PP. Changes in phase transition temperatures were monitored and possible causes were discussed. Results indicated that glass transition was slightly shifted to lower temperatures in composites. α transition temperature was higher in the case of composites and its intensity was higher as well. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4341–4349, 2006     

Effect of chemical reagents on the mechanical properties of natural fiber polypropylene composites

Chemical resistance of natural fiber (wood flour, rice hulls, kenaf fiber, and newsprint) polypropylene composites was studied in terms of their weight loss and reduction of mechanical properties after 7 days immersion in chemical reagents. Composites containing 25 and 50% of various natural fibers and polypropylene were prepared and immersed in NaOH (10%), NaClO (bleach solution) (13%), HCl (10%), H₂O₂ (3%), soap solution (1%), and acetone. Results indicated that H₂O₂, soap solution, and acetone had very negligible effects on all composites. On the other hand, the effects of NaClO and HCl were found to be statistically significant. Different fibers exhibited different behaviors regarding their chemical resistance. Rice hulls composites were considerably affected by NaOH, whereas the same chemical reagent was ineffective on other fibers. The effects of bleach solution and HCl on the mechanical performance of the composites were found to be critical. Generally, it was concluded that bleach and acids had the highest effects on natural fiber polypropylene composites. POLYM. COMPOS. 27:563–569, 2006. © 2006 Society of Plastics Engineers     

Utilization of Recycled Polypropylene for Production of Eco-Composites

Renewable raw materials and recyclable thermoplastic polymers provide attractive eco-friendly quality as well as environmental sustainability to the resulting natural fiber reinforced composites. We studied the possibility of using the recycled polypropylene (PP) for production of composites based on kenaf fibers (KF) and rice hulls (RH) as reinforcements. Polypropylene/rice-hulls (PP/RH/CA) and polypropylene/kenaf (PP/K/CA) composites with 30% fiber (filler) content and appropriate compatibilizing agent (CA)—a maleic anhydride grafted PP (MAPP), have been prepared by two steps procedure: melt mixing and compression molding. Flexural strength and thermal stability of the composites with recycled PP were similar to those with neat PP. The composites reinforced with kenaf fibers have shown better properties than those based on rice hulls. The flexural strength of the composite sample with recycled PP is 51.3 MPa in comparison with 51.1 MPa for the composite with neat PP. Degradation temperatures of neat and composite with recycled PP at residual weight 90% are 344.4°C and 343.5°C, respectively. The results obtained report the possibility of utilization of recycled PP for the production of natural reinforcements based composites with good mechanical characteristics for using as construction building materials in housing systems.     

Effects of reprocessing on the hygroscopic behavior of natural fiber high‐density polyethylene composites

Detailed analysis of the effects of recycling process on long‐term water absorption, thickness swelling, and water desorption behavior of natural fiber high‐density polyethylene composites is reported. Composite materials containing polyethylene and wood flour, rice hulls, or bagasse fibers and 2% compatibilizer were produced at constant fiber loading and were exposed to a simulated recycling process consisting of up to five times grinding and reprocessing under controlled conditions. A wide range of analytical methods including water absorption/desorption tests, thickness swelling tests, density measurement, scanning electron microscopy, image analysis, contact angle, fiber length analysis, Fourier transform infrared spectroscopy, and tensile tests were employed to understand the hygroscopic behavior of the recycled composites. Water absorption and thickness swelling behaviors were modeled using existing predictive models and a mathematical model was developed for water desorption at constant temperature. Results indicated that generally the recycled composites had considerably lower water absorption and thickness swellings as compared with the original composites which were attributed to changes in physical and chemical properties of the composites induced by the recycling process. Water desorption was found to be faster after recycling. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of bark flour content on the hygroscopic characteristics of wood–polypropylene composites

The effects of the bark content on the water absorption and thickness swelling of wood–plastic composites prepared from polypropylene, wood flour, and bark flour were studied. Samples were made with a laboratory twin‐screw extruder. The results showed that among composites free of maleic anhydride polypropylene, those composites containing a higher bark flour content exhibited lower water absorption and lower thickness swelling. Maleic anhydride polypropylene reduced water absorption and thickness swelling in composites containing wood flour and a lower content of bark flour but had no influence on the hygroscopic properties of composites made with higher bark contents. Adding maleic anhydride polypropylene had no effect on the water diffusion coefficients and swelling rate parameters of composites made with a higher bark flour content. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Water uptake and mechanical characteristics of natural filler–polypropylene composites

Water uptake characteristics and some mechanical properties of polypropylene composites containing three types of natural fillers, purified α‐cellulose, wastepaper fibers, and wood flour were studied. The fiber contents were 15, 25, and 35% by weight. Two percent maleic anhydride polypropylene (MAPP) was also added to the mix, as the compatibilizer agent. Mixing process was performed in a Brabender Plasticorder until a constant torque was reached. Composites made out of these combinations were then pressed in a laboratory press and ASTM standard test specimens were cut out of the sheets. Water absorption and tensile tests were performed on these specimens. The results showed a significant difference between the various filler types regarding water uptake. Water uptake also increased by the increase in filler content. Tensile strength and elongation at break in composites declined when compared with pure polypropylene, but their modulus of elasticity increased. Among the three types of fillers, no significant discrepancies were observed in terms of improving mechanical properties in composites. Filler content increase had no drastic effect regarding strength improvement. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 941–946, 2003     

Recycling of polypropylene‐based eco‐composites

BACKGROUND: Renewable resources and recyclable thermoplastic polymers provide an attractive eco‐friendly quality as well as environmental sustainability to the resulting natural fibre‐reinforced composites. The properties of polypropylene (PP)‐based composites reinforced with rice hulls or kenaf fibres were investigated with respect to their recyclability. Rice hulls from rice processing plants and natural lignocellulosic kenaf fibres from the bast of the plant Hibiscus cannabinus represent renewable sources that could be utilized for composites. Maleic anhydride‐grafted PP was used as a coupling agent to improve the interfacial adhesion between fillers and matrix. Composites containing 30 wt% reinforcement were manufactured by melt mixing and their mechanical and thermal properties were determined. The composites were then pelletized and reprocessed by melt mixing. Finally, structure/properties relationships were investigated as a function of the number of reprocessing cycles. RESULTS: It is found that the recycling processes do not induce very significant changes in flexural strength and thermal stability of the composites. In particular PP‐based composites reinforced with kenaf fibres are less sensitive to reprocessing cycles with respect to PP‐based composites reinforced with rice hulls. CONCLUSION: The response of PP‐based composites reinforced with rice hulls or kenaf fibres is promising since their properties remain almost unchanged after recycling processes. Moreover, the recycled composites are suitable for applications as construction materials for indoor applications. In fact, the flexural strength and modulus of these materials are comparable to those of conventional formaldehyde wood medium‐density fibreboards. Copyright © 2008 Society of Chemical Industry     

Influence of the zeolite type on the mechanical–thermal properties and volatile organic compound emissions of natural‐flour‐filled polypropylene hybrid composites

The physicomechanical properties, thermal properties, odor, and volatile organic compound (VOC) emissions of natural‐flour‐filled polypropylene (PP) composites were investigated as a function of the zeolite type and content. The surface area and pore structure of the natural and synthetic zeolites were determined by surface area analysis and scanning electron microscopy, respectively. With increasing natural and synthetic zeolite content, the tensile and flexural strengths of the hybrid composites were not significantly changed, whereas the water absorption was slightly increased. The thermal stability and degradation temperature of the hybrid composites were slightly increased with increasing natural and synthetic zeolite content. At natural and synthetic zeolite contents of 3%, the various odors and VOC emissions of the polypropylene/rice husk flour and polypropylene/wood flour hybrid composites were significantly reduced because of the absorption of the odor and VOC materials in the pore structures of the natural and synthetic zeolites. These results suggest that the addition of natural and synthetic zeolites to natural‐flour‐filled thermoplastic polymer composites is an effective method of reducing their odor and VOC emissions without any degradation of their mechanical and thermal properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Physical,mechanical, and thermal properties of polypropylene composites filled with walnut shell flour

Injection molded specimens were prepared from the walnut shell flour and polypropylene with and without maleic anhydride-grafted polypropylene at 40, 50, and 60% (weight) contents of the walnut shell. The bending and tensile modulus of the composites significantly increased with increasing the filler content while the bending and tensile strengths significantly decreased. Water absorption and thickness swelling of the composites increased with increasing filler content. The MAPP improved the interfacial adhesion between walnut shell flour and polymer matrix. A 40/57/3 formulation of the walnut shell flour/polypropylene/MAPP can be used in outdoor applications requiring a high dimensional stability.     

Effect of different thermal treatments on the mechanical performance of poly(L‐lactic acid) based eco‐composites

PLLA‐based eco‐composites reinforced with kenaf fiber and rice straw and containing red or yellow pigments have been studied. The mechanical behavior of the composites was tested by DMTA at two different annealing temperatures (65°C and 85°C) and times (15 min and 120 min) as well as at two preparation conditions: vacuum drying and long time at room temperature. A decrease of microhardness was observed during the water absorption tests. Moreover, the rice straw‐based composites absorbed more water than the kenaf‐ones. Generally, the dyed NFs composites presented better water resistance than undyed ones. The pigments improved the adhesion and led to better mechanical performance. The natural fibers favored the cold crystallization process of PLLA and shifted the cold crystallization peak temperature to lower values, as it was confirmed by DSC measurements. The values of tensile storage modulus obtained after different preparation condition were strongly affected by the process of physical ageing. According to, tan δ parameter, the samples stored at room temperature for a long time showed the highest amorphous content. The PLLA eco‐composite reinforced with kenaf fibers, dyed with the red pigment, and annealed at 85°C for 2 h displays the best mechanical properties. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Properties of unidirectional kenaf fiber–polyolefin laminates

The objective of this research was to evaluate the effect of kenaf fiber orientation and furnish formulation on the properties of laminated natural fiber–polymer composites (LNPC). The uniaxial fiber orientation provided property enhancement of the LNPC. The randomly oriented kenaf fibers, regardless of fiber contents in the laminates, provided an equal performance compared to the composites made of 25% fiber glass reinforced polyvinyl ester resin in the same laboratory processing conditions. Thermal properties of the laminates obtained from thermal gravimetry with differential scanning calorimetry (TG‐DSC) showed that the melting point (T_m) of the polypropylene (PP) film laminates decreased, and the crystallization peak increased as the kenaf fiber content in the laminates increased. The surface morphology results of the kenaf fiber and fractures of the laminates showed that some fibers pulled out from the matrix. The mechanical properties increased as the kenaf fiber content increased. The tensile stress of the laminated composites fabricated with unidirectional fiber orientation was about 2–4 times higher than those with the randomly oriented samples. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Effects of repetitive processing,wood content,and coupling agent on the mechanical,thermal, and water absorption properties of wood/polypropylene green composites

In an effort to determine to what extent natural fiber/plastic composites were recyclable, this study conducted repetitive processing cycles on wood flour/polypropylene composites through extrusion up to three times followed by injection molding. Mechanical properties of the composites, containing 10–50?wt% wood flour and with/without addition of 3?wt% maleic anhydride polypropylene (MAPP) as coupling agent, were evaluated by conducting tensile test, thermal analysis, and water absorption test. Repetitive processing as well as wood content and coupling agent addition influenced physical properties of the composites. MAPP functioned well in improving fiber-matrix adhesion in terms of mechanical properties. Repetitive processing did not deteriorate the composite’s properties; rather opposite effect was shown. Thermal analysis indicated that the alteration in properties was contributed by the molecular condition of the polypropylene matrix. Water absorption increased with the wood flour content but reduced when MAPP was added and with more processing cycles.     

Effect of a silane coupling agent on the properties of white rice husk ash–polypropylene/natural rubber composites

White rice husk ash (WRHA)–polypropylene (PP)/natural rubber (NR) composites were prepared using a Brabender Plasticorder at 180 °C and a rotor speed of 50 rev min^?1. The mechanical and water‐absorption properties were studied. The incorporation of WRHA into the PP/NR matrix has resulted in the improvement of the tensile modulus; however, the tensile strength, elongation at break and stress at yield decreased with increasing WRHA loading. Poor filler matrix interactions are believed to be responsible for the decrease in the properties. Incorporation of a silane coupling agent, 3‐aminopropyl triethoxysilane (3‐APE), improved tensile modulus, tensile strength and stress at yield of the composites. Water‐absorption studies indicate that the use of the coupling agent reduced the amount of water absorbed by the composites. © 2001 Society of Chemical Industry     

Evaluation of mechanical,morphological, and biodegradable properties of hybrid natural fiber polymer nanocomposites

Hybrid natural fiber polymer nanocomposites were prepared using various natural fibers (kenaf, coir, and wood), polypropylene, and montmorillonite nanoclay through the hot compression method. The effects of fiber hybridization and nanoclay content on the physico‐mechanical and biodegradable properties of the synthesized composites were investigated. Fourier‐transform infrared and scanning electron microscopic analyses indicated that the structure and surface morphology of composites were transformed after fiber hybridization and the subsequent nanoclay incorporation. X‐ray diffraction pattern revealed that the percent crystallinity of hybrid nanocomposites significantly increased. Furthermore, the tensile strength and tensile modulus also significantly improved for the hybrid nanocomposites due to the addition of montmorillonite nanoclay. The biodegradability and water absorption tests were conducted. The results show that biodegradability of the nanocomposites decreased and water absorption increased due to the addition of montmorillonite nanoclay. POLYM. COMPOS., 38:583–587, 2017. © 2015 Society of Plastics Engineers     

Sunflower seed cake as reinforcing filler in thermoplastic composites

Dimensional stability, mechanical properties, and melting and crystallization behavior of polypropylene composites filled with sunflower seed cake (SSC) were investigated. Injection molded composites were prepared from the SSC flour and polypropylene with and without maleic anhydride‐grafted polypropylene (MAPP) at 30, 40, 50, and 60 wt % contents of the SSC flour. Twenty‐eight days thickness swelling and water absorption values of the specimens increased by 43 and 56% as the filler content increased from 30 to 60 wt %, respectively. The flexural modulus of the polypropylene composites increased from 3157 to 4363 MPa as the SSC flour increased from 30 to 60 wt %. The maximum flexural strength 38.4 MPa was observed for 40 wt % SSC flour filled specimens. However, further increment in the SCC flour decreased the flexural strength to 31.4 MPa. The tensile strength of the specimens decreased from 22.5 to 14 MPa while the tensile modulus increased from 3023 to 3677 MPa as the SSC flour increased from 30 to 60 wt %. The dimensional stability and mechanical properties of the composites were significantly improved by the incorporation of the coupling agent (MAPP). The effect of the MAPP addition was more pronounced for the strength than for the modulus. The melting temperature and degree of crystallinity of the neat polypropylene decreased with increasing content of the SSC flour. The degree of crystallinity of filled composites considerably increased with the incorporation of the MAPP. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effects of material parameters on the diffusion and sorption properties of wood‐flour/polypropylene composites

Composites of wood in a thermoplastic matrix (wood–plastic composites) are considered a low maintenance solution to using wood in outdoor applications. Knowledge of moisture uptake and transport properties would be useful in estimating moisture‐related effects such as fungal attack and loss of mechanical strength. Our objectives were to determine how material parameters and their interactions affect the moisture uptake and transport properties of injection‐molded composites of wood‐flour and polypropylene and to compare two different methods of measuring moisture uptake and transport. A two‐level, full‐factorial design was used to investigate the effects and interactions of wood‐flour content, wood‐flour particle size, coupling agent, and surface removal on moisture uptake and transport of the composites. Sorption and diffusion experiments were performed at 20°C and 65 or 85% relative humidity as well as in water, and diffusion coefficients were determined. The wood‐flour content had the largest influence of all parameters on moisture uptake and transport properties. Many significant interactions between the variables were also found. The interaction between wood‐flour content and surface treatment was often the largest. The diffusion coefficients derived from the diffusion experiments were different from those derived from the sorption experiments, suggesting that different mechanisms occur. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 752–763, 2007     

Water absorption and dimensional stability of short kenaf fiber‐filled polypropylene composites treated with maleated polypropylene

The purpose of this research was to investigate the water absorption behavior and associated dimensional stability of kenaf‐polypropylene‐filled (PP/KF) composites. Composites with different fiber loadings, ranging from 0 to 40 wt %, were prepared with a twin‐screw extruder followed by hot press molding. The influence of the compatibilizer was also studied for PP/KF composite with 5 wt % maleated PP (MAPP). Water absorption testing was carried out at room temperature for 7 weeks. Tensile, flexural, and impact tests were also performed on control, wet, and re‐dried specimens. Increasing the fiber content resulted in higher water absorption and thickness swelling. The inferior mechanical properties of the wet composites were attributed to the effect of water, which deteriorates the interfacial properties of composites. On re‐drying, all properties were almost recovered because of the recovery of interfacial area as evident in scanning electron micrographs. Incorporation of the MAPP significantly improved the compatibility between the fiber and matrix and the mechanical properties of the composites compared with those without MAPP. It also diminished the water absorption as well as the related thickness swelling in the composites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of compatibilizers on water absorption kinetics of polypropylene/wood flour foamed composites

Polypropylene (PP)/wood flour foamed composites were prepared by taking PP:wood flour in the ratios of 100 : 0, 90 : 10, 80 : 20, 70 : 30, and 60 : 40 (w/w), with and without compatibilizers like maleic anhydride‐treated wood flour and maleic anhydride‐grafted PP (PPgMA). The foamed composite samples were employed for water swelling at 27°C, 70°C, and in steam. The absorption of water increased with increase in filler contents for all three‐temperature conditions. The maleic anhydride‐treated wood flour and PPgMA showed reduction in water swelling, and the best one was in case of the PPgMA‐foamed composites for respective conditions. Diffusion, sorption, and permeation coefficients were determined to study the absorption kinetics. FTIR spectra were also recorded for 30 wt % of filler loading for all the composites, which showed the effect of compatibilizers on reduction in water absorption in foamed PP/wood flour composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2530–2537, 2006