Novel Heteroleptic CuI Complexes with Tunable Emission Color for Efficient Phosphorescent Light‐Emitting Diodes

A series of orange‐red to red phosphorescent heteroleptic Cu^I complexes (the first ligand: 2,2′‐biquinoline (bq), 4,4′‐diphenyl‐2,2′‐biquinoline (dpbq) or 3,3′‐methylen‐4,4′‐diphenyl‐2,2′‐biquinoline (mdpbq); the second ligand: triphenylphosphine or bis[2‐(diphenylphosphino)phenyl]ether (DPEphos)) have been synthesized and fully characterized. With highly rigid bulky biquinoline‐type ligands, complexes [Cu(mdpbq)(PPh₃)₂](BF₄) and [Cu(mdpbq)(DPEphos)](BF₄) emit efficiently in 20 wt % PMMA films with photoluminescence quantum yield of 0.56 and 0.43 and emission maximum of 606 nm and 617 nm, respectively. By doping these complexes in poly(vinyl carbazole) (PVK) or N‐(4‐(carbazol‐9‐yl)phenyl)‐3,6‐bis(carbazol‐9‐yl) carbazole (TCCz), phosphorescent organic light‐emitting diodes (OLEDs) were fabricated with various device structures. The complex [Cu(mdpbq)(DPEphos)](BF₄) exhibits the best device performance. With the device structure of ITO/PEDOT/TCCz:[Cu(mdpbq)(DPEphos)](BF₄) (15 wt %)/TPBI/LiF/Al (III), a current efficiency up to 6.4 cd A^–1 with the Commission Internationale de L'Eclairage (CIE) coordinates of (0.61, 0.39) has been realized. To our best knowledge, this is the first report of efficient mononuclear Cu^I complexes with red emission.     

Toward Highly Efficient Solid‐State White Light‐Emitting Electrochemical Cells: Blue‐Green to Red Emitting Cationic Iridium Complexes with Imidazole‐Type Ancillary Ligands

Using imidazole‐type ancillary ligands, a new class of cationic iridium complexes ( 1 – 6 ) is prepared, and photophysical and electrochemical studies and theoretical calculations are performed. Compared with the widely used bpy (2,2′‐bipyridine)‐type ancillary ligands, imidazole‐type ancillary ligands can be prepared and modified with ease, and are capable of blueshifting the emission spectra of cationic iridium complexes. By tuning the conjugation length of the ancillary ligands, blue‐green to red emitting cationic iridium complexes are obtained. Single‐layer light‐emitting electrochemical cells (LECs) based on cationic iridium complexes show blue‐green to red electroluminescence. High efficiencies of 8.4, 18.6, and 13.2 cd A^?1 are achieved for the blue‐green‐emitting, yellow‐emitting, and orange‐emitting devices, respectively. By doping the red‐emitting complex into the blue‐green LEC, white LECs are realized, which give warm‐white light with Commission Internationale de L'Eclairage (CIE) coordinates of (0.42, 0.44) and color‐rendering indexes (CRI) of up to 81. The peak external quantum efficiency, current efficiency, and power efficiency of the white LECs reach 5.2%, 11.2 cd A^?1, and 10 lm W^?1, respectively, which are the highest for white LECs reported so far, and indicate the great potential for the use of these cationic iridium complexes in white LECs.     

White‐Light‐Emitting Diodes Based on Iridium Complexes via Efficient Energy Transfer from a Conjugated Polymer

Efficient white‐light‐emitting diodes (WLEDs) have been developed using a polyfluorene‐type blue‐emitting conjugated polymer doped with green and red phosphorescent dyes. The emission spectrum of the conjugated polymer, which has a very high luminescent efficiency, shows a large spectral overlap with the absorbance of green and red iridium complexes. Also, efficient energy transfer from the conjugated polymer to the iridium complexes is observed. Poly(N‐vinyl carbazole) is used to improve the miscibility between conjugated polymer and iridium complexes because of their poor chemical compatibility and phase separation. A white emission spectrum is easily obtained by varying the contents of the three materials and controlling the phase morphology. Moreover, these WLEDs show a voltage‐independent electroluminescence owing to the threshold and driving voltage of the three materials being similar as a result of energy transfer.     

Starburst DCM‐Type Red‐Light‐Emitting Materials for Electroluminescence Applications

Three new starburst DCM (4‐(dicyanomethylene)‐2‐methyl‐6‐[4‐(dimethylaminostyryl)‐4H‐pyran]) derivatives, 4,4′,4′′‐tris[2‐(4‐dicyanomethylene‐6‐t‐butyl‐4H‐pyran‐2‐yl)‐ethylene]triphenylamine (TDCM), 4,4′,′′‐tris[2‐(4‐(1′,3′‐indandione)‐6‐t‐butyl‐4H‐pyran‐2‐yl)‐ethylene]triphenylamine (TIN), and 4‐methoxy‐4′,4′′‐bis[2‐(4‐(1′,3′‐indandione)‐6‐t‐butyl‐4H‐pyran‐2‐yl)‐ethylene]triphenylamine (MBIN), have been designed and synthesized for application as red‐light emitters in organic light‐emitting diodes (OLEDs). Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) reveal their extremely high glass‐transition temperatures and decomposition temperatures, as well as their low tendency to crystallize. Photoluminescence and electroluminescence measurements show that they exhibit a greatly restricted concentration‐quenching effect compared to DCM1 (4‐(dicyanomethylene)‐2‐methyl‐6‐[p‐(N,N‐dimethylamino)‐styryl]‐4H‐pyran), a simple but typical DCM‐type dye, as a result of their non‐planar, three‐dimensional structures that result from their unique propeller‐like triphenylamine electron‐donating cores. The peripheral electron‐withdrawing moieties also play a key role in the restriction of concentration quenching. That is, TIN and MBIN, bearing 1,3‐indandione acceptors, emit more efficiently than TDCM and DCM1, which have dicyanomethylene as acceptors at a high doping concentration of 10 wt.‐% in poly(9‐vinylcarbazole) (PVK) film, irrespective of whether they are photoexcited or electroexcited, though their fluorescence quantum yields in dilute solutions are much lower than that of DCM1. By way of the co‐doping approach, the electroluminescence device with the configuration indium tin oxide (ITO)/PVK:MBIN(10 wt.‐%):tris(4‐(2‐phenylethynyl)‐phenyl)amine (TPA; 30 wt.‐%) (70 nm)/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline (BCP; 20 nm)/tris(8‐quinolinolato) aluminum (Alq₃;15 nm)/LiF (0.3 nm)/Al (150 nm) exhibits a turn‐on voltage of 5.1 V, a maximum luminance of 6971 cd m^–2, a maximum efficiency of 6.14 cd A^–1 (405 cd m^–2), and chromaticity coordinates of (0.66,0.33). The encouraging electroluminescence performance suggests potential applications of the starburst DCM red‐light emitters in OLEDs.     

Highly Efficient Non‐Doped Blue Organic Light‐Emitting Diodes Based on Fluorene Derivatives with High Thermal Stability

A new series of blue‐light‐emitting fluorene derivatives have been synthesized and characterized. The fluorene derivatives have high fluorescence yields, good thermal stability, and high glass‐transition temperatures in the range 145–193 °C. Organic light‐emitting diodes (OLEDs) fabricated using the fluorene derivatives as the host emitter show high efficiency (up to 5.3 cd A^–1 and 3.0 lm W^–1) and bright blue‐light emission (Commission Internationale de L'Eclairage (CIE) coordinates of x = 0.16, y = 0.22). The performance of the non‐doped fluorene‐based devices is among the best fluorescent blue‐light‐emitting OLEDs. The good performance of the present blue OLEDs is considered to derive from: 1) appropriate energy levels of the fluorene derivatives for good carrier injection; 2) good carrier‐transporting properties; and 3) high fluorescence efficiency of the fluorene derivatives. These merits are discussed in terms of the molecular structures.     

Highly Efficient Pure‐White‐Light‐Emitting Diodes from a Single Polymer: Polyfluorene with Naphthalimide Moieties

Light‐emitting diodes exhibiting efficient pure‐white‐light electroluminescence have been successfully developed by using a single polymer: polyfluorene derivatives with 1,8‐naphthalimide chromophores chemically doped onto the polyfluorene backbones. By adjusting the emission wavelength of the 1,8‐naphthalimide components and optimizing the relative content of 1,8‐naphthalimide derivatives in the resulting polymers, white‐light electroluminescence from a single polymer, as opposed to a polymer blend, has been obtained in a device with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene)(50 nm)/polymer(80 nm)/Ca(10 nm)/Al(100 nm). The device exhibits Commission Internationale de l'Eclairage coordinates of (0.32,0.36), a maximum brightness of 11 900 cd m^–2, a current efficiency of 3.8 cd A^–1, a power efficiency of 2.0 lm W^–1, an external quantum efficiency of 1.50 %, and quite stable color coordinates at different driving voltages, even at high luminances of over 5000 cd m^–2.     

Highly Efficient Green‐Emitting Phosphorescent Iridium Dendrimers Based on Carbazole Dendrons

Green‐emitting iridium dendrimers with rigid hole‐transporting carbazole dendrons are designed, synthesized, and investigated. With second‐generation dendrons, the photoluminescence quantum yield of the dendrimers is up to 87 % in solution and 45 % in a film. High‐quality films of the dendrimers are fabricated by spin‐coating, producing highly efficient, non‐doped electrophosphorescent organic light‐emitting diodes (OLEDs). With a device structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid)/neat dendrimer/1,3,5‐tris(2‐N‐phenylbenzimidazolyl)benzene/LiF/Al, a maximum external quantum efficiency (EQE) of 10.3 % and a maximum luminous efficiency of 34.7 cd A^–1 are realized. By doping the dendrimers into a carbazole‐based host, the maximum EQE can be further increased to 16.6 %. The integration of rigid hole‐transporting dendrons and phosphorescent complexes provides a new route to design highly efficient solution‐processable dendrimers for OLED applications.     

Small Molecules in Light‐Emitting Electrochemical Cells: Promising Light‐Emitting Materials

Light‐emitting electrochemical cells (LECs) are solid‐state lighting devices that convert electric current to light within electroluminescent organic semiconductors, and these devices have recently attracted significant attention. Introduced in 1995, LECs are considered a great breakthrough in the field of light‐emitting devices for their applications in scalable and adaptable fabrication processes aimed at producing cost‐efficient devices. Since then, LECs have evolved through the discovery of new suitable emitters, understanding the working mechanism of devices, and the development of various fabrication methods. LECs are best known for their simple architecture and easy, low‐cost fabrication techniques. The key feature of their fabrication is the use of air stable electrodes and a single active layer consisting of mobile ions that enable efficient charge injection and transport processes within LEC devices. More importantly, LEC devices can be operated at low voltages with high efficiencies, contributing to their widespread interest. This review provides a general overview of the development of LECs and discusses how small molecules can be utilized in LEC applications by overcoming the use of traditional lighting materials like polymers and ionic transition metal complexes. The achievements of each study concerning small molecule LECs are discussed.     

Highly Efficient Orange and Green Solid‐State Light‐Emitting Electrochemical Cells Based on Cationic IrIII Complexes with Enhanced Steric Hindrance

Highly efficient orange and green emission from single‐layered solid‐state light‐emitting electrochemical cells based on cationic transition‐metal complexes [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂sb]PF₆ (where ppy is 2‐phenylpyridine, dFppy is 2‐(2,4‐difluorophenyl)pyridine, and sb is 4,5‐diaza‐9,9′‐spirobifluorene) is reported. Photoluminescence measurements show highly retained quantum yields for [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂ sb]PF₆ in neat films (compared with quantum yields of these complexes dispersed in m‐bis(N‐carbazolyl)benzene films). The spiroconfigured sb ligands effectively enhance the steric hindrance of the complexes and reduce the self‐quenching effect. The devices that use single‐layered neat films of [Ir(ppy)₂sb]PF₆ and [Ir(dFppy)₂sb]PF₆ achieve high peak external quantum efficiencies and power efficiencies of 7.1 % and 22.6 lm W^–1) at 2.5 V, and 7.1 % and 26.2 lm W^–1 at 2.8 V, respectively. These efficiencies are among the highest reported for solid‐state light‐emitting electrochemical cells, and indicate that cationic transition‐metal complexes containing ligands with good steric hindrance are excellent candidates for highly efficient solid‐state electrochemical cells.     

Highly Efficient Non‐Doped Blue‐Light‐Emitting Diodes Based on an Anthrancene Derivative End‐Capped with Tetraphenylethylene Groups

A novel blue‐emitting material, 2‐tert‐butyl‐9,10‐bis[4‐(1,2,2‐triphenylvinyl)phenyl]anthracene ( TPVAn ), which contains an anthracene core and two tetraphenylethylene end‐capped groups, has been synthesized and characterized. Owing to the presence of its sterically congested terminal groups, TPVAn possesses a high glass transition temperature (155 °C) and is morphologically stable. Organic light‐emitting diodes (OLEDs) utilizing TPVAn as the emitter exhibit bright saturated‐blue emissions (Commission Internationale de L'Eclairage (CIE) chromaticity coordinates of x = 0.14 and y = 0.12) with efficiencies as high as 5.3 % (5.3 cd A^–1)—the best performance of non‐doped deep blue‐emitting OLEDs reported to date. In addition, TPVAn doped with an orange fluorophore served as an authentic host for the construction of a white‐light‐emitting device that displayed promising electroluminescent characteristics: the maximum external quantum efficiency reached 4.9 % (13.1 cd A^–1) with CIE coordinates located at (0.33, 0.39).     

Efficient Light‐Emitting Devices Based on Phosphorescent Polyhedral Oligomeric Silsesquioxane Materials

Synthesis, photophysical, and electrochemical characterizations of iridium‐complex anchored polyhedral oligomeric silsesquioxane (POSS) macromolecules are reported. Monochromatic organic light‐emitting devices based on these phosphorescent POSS materials show peak external quantum efficiencies in the range of 5–9%, which can be driven at a voltage less than 10 V for a luminance of 1000 cd m^?2. The white‐emitting devices with POSS emitters show an external quantum efficiency of 8%, a power efficiency of 8.1 lm W^?1, and Commission International de'lÉclairage coordinates of (0.36, 0.39) at 1000 cd m^?2. Encouraging efficiency is achieved in the devices based on hole‐transporting and Ir‐complex moieties dual‐functionalized POSS materials without using host materials, demonstrating that triplet‐dye and carrier‐transporting moieties functionalized POSS material is a viable approach for the development of solution‐processable electrophosphorescent devices.     

Efficient and Long Lived Green Light‐Emitting Electrochemical Cells

The combination of high efficiencies and long lifetime in a single light‐emitting electrochemical cell (LEC) device remain a major problem in LEC technology, preventing its application in commercial lighting devices. Three green light‐emitting cationic iridium‐based complexes of the general composition [Ir(C^{^}N)₂(N^{^}N)][PF₆] with 4‐Fppy (2‐(4‐fluorophenyl)pyridinato) as the cyclometalating C^{^}N ligand and 1,10‐phenanthroline ( 1 ), 4,7‐diphenyl‐1,10‐phenanthroline (bathophenanthroline, bphen, 2 ), and 2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline (bathocuprione, dmbphen, 3 ) as ancillary N^{^}N ligands are synthesized and characterized. Computational studies are carried out in order to compare the electronic structure of the three ionic transition metal complexes (iTMCs) and provide insights into their potential as LEC emitter materials. LECs are then fabricated with complexes 1 – 3 . Driven under a pulsed current, they display a high luminance and current and power efficiencies. As the LEC based on complex 2 displays the overall best device performance, including the longest lifetime of 474 h, it is selected for subsequent driving conditions optimization. An extraordinary power efficiency of 25 lm W^?1 and current efficiency of 30 cd A^?1 are achieved under optimized operation conditions with reduced current density, resulting in a long device lifetime of 720 h. Altogether, ligand design in iTMCs and optimization of the device driving conditions leads to a significant improvement in LEC performance.     

New Approach Toward Fast Response Light‐Emitting Electrochemical Cells Based on Neutral Iridium Complexes via Cation Transport

Here, a new method is presented to increase the turn‐on time and stability of light‐emitting electrochemical cells (LECs). To this end, a neutral iridium complex ( 5 ) containing a pendant Na⁺ ion that is generally known to have a faster mobility in the solid film than bulky anions is introduced, instead of the classic ionic transition metal complex (iTMC) with counter anion ( 7 ). Synthesis, photophysical and electrochemical studies of these complexes are reported. In the device configuration of ITO/ 5 or 7 +PEO (polyethylene oxide) (100–110 nm)/Au, as the voltage increases, complex 5 emits red light at ?3.6 V while complex 7 appears at –5.6 V, although their electrochemical and photophysical gap are similar. Furthermore, at constant voltage, –3 V, the turn‐on time of complex 5 was less than 0.5 min, which is a 60‐fold faster turn‐on time compared to the iTMC ( 7 ) with PF₆^?. These results are presumably due to the faster delivery of the Na⁺ ions to the electrode compared to PF₆^? ions. Also, the device lifetime of complex 5 exhibits a six‐fold increase in stability and a three‐fold shorter time to reach maximum brightness at constant bias compared to the device made with complex 7 .     

Rationalizing Fabrication and Design Toward Highly Efficient and Stable Blue Light‐Emitting Electrochemical Cells Based on NHC Copper(I) Complexes

Recently, the use of a new family of electroluminescent copper(I) complexes—i.e., the archetypal [Cu(IPr)(3‐Medpa)][PF₆] complex; IPr: 1,3‐bis‐(2,6‐di‐iso‐propylphenyl)imidazole‐2‐ylidene; 3‐Medpa: 2,2′‐bis‐(3‐methylpyridyl)amine—has led to blue light‐emitting electrochemical cells (LECs) featuring luminances of 20 cd m^?2, stabilities of 4 mJ, and efficiencies of 0.17 cd A^?1. Herein, this study rationalizes how to enhance these figures‐of‐merit optimizing both device fabrication and design. On one hand, a comprehensive spectroscopic and electrochemical study reveals the degradation of this novel emitter in common solvents used for LEC fabrication, as well as the impact on the photoluminescence features of thin‐films. On the other hand, spectro‐electrochemical and electrochemical impedance spectroscopy assays suggest that the device performance is strongly limited by the irreversible formation of oxidized species that mainly act as carrier trappers and luminance quenchers. Based on all of the aforementioned, device optimization was realized using ionic additives and a hole transporter either as a host–guest or as a multilayered architecture approach to decouple hole/electron injection. The latter significantly enhances the LEC performance, reaching luminances of 160 cd m^?2, stabilities of 32.7 mJ, and efficiencies of 1.2 cd A^?1. Overall, this work highlights the need of optimizing both device fabrication and design toward highly efficient and stable LECs based on cationic copper(I) complexes.     

Efficient Light‐Emitting Electrochemical Cells (LECs) Based on Ionic Iridium(III) Complexes with 1,3,4‐Oxadiazole Ligands

Eight new iridium(III) complexes 1‐8 , with 1,3,4‐oxadiazole (OXD) derivatives as the cyclometalated C^N ligand and/or the ancillary N^N ligands are synthesized and their electrochemical, photophysical, and solid‐state light‐emitting electrochemical cell (LEC) properties are investigated. Complexes 1 , 2 , 7 and 8 are additionally characterized by single crystal X‐ray diffraction. LECs based on complexes 1‐8 are fabricated with a structure indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/cationic iridium complex:ionic liquid/Al. LECs of complexes 1 – 6 with OXD derivatives as the cyclometalated ligands and as the ancillary ligand show yellow luminescence (λ_max = 552–564 nm). LECs of complexes 7 and 8 with cyclometalated C^N phenylpyridine ligands and an ancillary N^N OXD ligand show red emission (λ_max 616–624 nm). Using complex 7 external quantum efficiency (EQE) values of >10% are obtained for devices (210 nm emission layer) at 3.5 V. For thinner devices (70 nm) high brightness is achieved: red emission for 7 (8528 cd m^?2 at 10 V) and yellow emission for 1 (3125 cd m^?2 at 14 V).     

Molecularly Engineered Near‐Infrared Light‐Emitting Electrochemical Cells

The development of near‐infrared (NIR) luminescent materials has emerged as a promising research field with important applications in solid‐state lighting (SSL), night‐vision‐readable displays, and the telecommunication industry. Over the past two decades, remarkable advances in the development of light‐emitting electrochemical cells (LECs) have stunned the SSL community, which has in turn driven the quest for new classes of stable, more efficient NIR emissive molecules. In this review, an overview of the state of the art in the field of near‐infrared light‐emitting electrochemical cells (NIR‐LEC) is provided based on three families of emissive compounds developed over the past 25 years: i) transition metal complexes, ii) ionic polymers, and iii) host–guest materials. In this context, ionic and conductive emitters are particularly attractive since their emission can be tuned via molecular design, which involves varying the chemical nature and substitution pattern of their ancillary ligands. Herein, the challenges and current limitations of the latter approach are highlighted, particularly with respect to developing NIR‐LECs with high external quantum efficiencies. Finally, useful guidelines for the discovery of new, efficient emitters for tailored NIR‐LEC applications are presented, together with an outlook towards the design of new NIR‐SSL materials.     

Anthracene‐Containing Binaphthol Chromophores for Light‐Emitting Diode (LED) Fabrication

Non‐crystalline anthracene‐containing binaphthol chromophores were synthesized, characterized, and used in the fabrication of organic light‐emitting diodes (OLEDs). Specifically, the target molecules were 2,2′‐dihexyloxy‐1,1′‐binaphthol‐6,6′‐bisanthracene ( BA1 ) and 2,2′‐dimethoxyy‐1,1′‐binaphthol‐6,6′‐bisanthracene ( BA2 ). Molecules BA1 and BA2 provide amorphous solids, as determined by their glass‐transition temperature (T_g) measured by differential scanning calorimetry (DSC). Efficient multilayer OLEDs containing BA1 and BA2 were fabricated by evaporation techniques. Differences in the electroluminescence frequencies of these devices suggests that the degree of alkoxide substitution controls the mobility within the binaphthol material, and therefore the recombination region in the device. Compound BA2 can also be used to dope CBP ((4,4′‐bis(carbazol‐9‐yl)biphenyl)) in the fabrication of highly efficient OLEDs.     

Blue‐Emitting Iridium(III) Complexes for Light‐Emitting Electrochemical Cells: Advances,Challenges, and Future Prospects

Light‐emitting electrochemical cells (LECs) are one of the most promising technologies for solid‐sate lighting. Among them, LECs based on phosphorescent iridium(III) complexes have attracted significant research interest in the past 15 years, because of their high efficiency and tunable emission color across the entire visible spectrum. To fabricate white LECs for lighting, high‐performance blue LECs are the first prerequisite. Huge efforts have been devoted to improving the performances of blue LECs based on iridium(III) complexes either by developing new blue‐emitting complexes or by engineering the devices. Nevertheless, blue LECs have still shown much lower performances (brightness, efficiency, stability, etc.) compared to the red, orange‐red, yellow, and green counterpart devices. In particular, a single blue LEC with satisfactory blue‐color purity, high efficiency, and high stability is still missing. Here, the advances in blue‐emitting iridium(III) complexes for LECs and the device engineering on LECs using the complexes are reported. The challenges ahead are discussed, and future prospects are outlined.     

Scrutinizing Design Principles toward Efficient,Long‐Term Stable Green Light‐Emitting Electrochemical Cells

Enhancing the efficiency and lifetime of light emitting electrochemical cells (LEC) is the most important challenge on the way to energy efficient lighting devices of the future. To avail this, emissive Ir(III) complexes with fluoro‐substituted cyclometallated ligands and electron donating groups (methyl and tert ‐butyl)‐substituted diimine ancillary (N^{^}N) ligands and their associated LEC devices are studied. Four different complexes of general composition [Ir(4ppy)₂(N^{^}N)][PF₆] (4Fppy = 2‐(4‐fluorophenyl)pyridine) with the N^{^}N ligand being either 2,2′‐bipyridine ( 1 ), 4.4′‐dimethyl‐2,2′‐bipyridine ( 2 ), 5.5′‐dimethyl‐2,2′‐bipyridine ( 3 ), or 4.4′‐di‐tert ‐butyl‐2,2′‐bipyridine ( 4 ) are synthesized and characterized. All complexes emit in the green region of light with emission maxima of 529–547 nm and photoluminescence quantum yields in the range of 50.6%–59.9%. LECs for electroluminescence studies are fabricated based on these complexes. The LEC based on ( 1 ) driven under pulsed current mode demonstrated the best performance, reaching a maximum luminance of 1605 cd m^?2 resulting in 16 cd A^?1 and 8.6 lm W^?1 for current and power efficiency, respectively, and device lifetime of 668 h. Compared to this, LECs based on ( 3 ) and ( 4 ) perform lower, with luminance and lifetime of 1314 cd m^?2, 45.7 h and 1193 cd m^?2, 54.9 h, respectively. Interestingly, in contrast to common belief, the fluorine content of the Ir‐iTMCs does not adversely affect the LEC performance, but rather electron donating substituents on the N^{^}N ligands are found to dramatically reduce both performance and stability of the green LECs. In light of this, design concepts for green light emitting electrochemical devices have to be reconsidered.