Supercritical‐Fluid‐Assisted One‐Pot Synthesis of Biocompatible Core(γ‐Fe2O3)/Shell(SiO2) Nanoparticles as High Relaxivity T2‐Contrast Agents for Magnetic Resonance Imaging

Monodisperse iron oxide/microporous silica core/shell composite nanoparticles, core(γ‐Fe₂O₃)/shell(SiO₂), with a diameter of approximately 100 nm and a high magnetization are synthesized by combining sol–gel chemistry and supercritical fluid technology. This one‐step processing method, which is easily scalable, allows quick fabrication of materials with controlled properties and in high yield. The particles have a specific magnetic moment (per kg of iron) comparable to that of the bulk maghemite and show superparamagnetic behavior at room temperature. The nanocomposites are proven to be useful as T₂ MRI imaging agent. They also have potential to be used in NMR proximity sensing, theranostic drug delivery, and bioseparation.     

The Active‐Core/Active‐Shell Approach: A Strategy to Enhance the Upconversion Luminescence in Lanthanide‐Doped Nanoparticles

Nanoparticles of NaGdF₄ doped with trivalent erbium (Er³⁺) and ytterbium (Yb³⁺) are prepared by a modified thermal decomposition synthesis from trifluoroacetate precursors in 1‐octadecene and oleic acid. The nanoparticles emit visible upconverted luminescence on excitation with near‐infrared light. To minimize quenching of this luminescence by surface defects and surface‐associated ligands, the nanoparticles are coated with a shell of NaGdF₄. The intensity of the upconversion luminescence is compared for nanoparticles that were coated with an undoped shell (inert shell) and similar particles coated with a Yb³⁺‐doped shell (active shell). Luminescence is also measured for nanoparticles lacking the shell (core only), and doped with Yb³⁺ at levels corresponding to the doped and undoped core/shell materials respectively. Upconversion luminescence was more intense for the core/shell materials than for the uncoated nanoparticles, and is greatest for the materials having the “active” doped shell. Increasing the Yb³⁺ concentration in the “core‐only” nanoparticles decreases the upconversion luminescence intensity. The processes responsible for the upconversion are presented and the potential advantages of “active‐core”/“active‐shell” nanoparticles are discussed.     

One‐Step Fabrication of Multifunctional Core‐Shell Fibres by Co‐Electrospinning

In the present study, multifunctional core‐shell fibre mats were designed by co‐electrospinning. These core‐shell fibre mats have three different functionalities: 1) they are magnetic, 2) they change their optical properties with the pH of the media, and 3) they are sensitive to O₂. The shell is formed by a fluorescent pH‐sensitive co‐polymer which was previously synthesised and characterized by our research group. The core is a suspension formed by magnetic nanoparticles in a solution made up by a lipophilic indicator dye (oxygen indicator; PtOEP) and, poly‐methyl methacrylate, in THF. The magnetic nanoparticles were prepared by encapsulation of magnetite within a cross‐linked polymeric matrix (MMA‐co‐EDMA). To our knowledge, this is the first time that three functionalities (magnetic properties, sensitivity to pH, and response to O₂ concentration) were successful conjugated on the same micro‐ or nano‐material via a facile one‐step process with high yield and cost effectiveness. The morphology of the well‐organized core‐shell fibres were characterized by high resolution scanning electron microcopy (HRSEM), transmission electron microcopy (TEM), and confocal laser microscopy. The luminescent properties of core‐shell fibre mats were analysed and successfully used for simultaneously monitoring pH (from 6 to 8) and O₂, showing complete reversibility, high sensitivity (i.e., K_sv = 7.07 bar^?1 for determining O₂ in aqueous media), high magnetic susceptibility, and short response times.     

One‐Step Solvent‐Free Synthesis and Characterization of Zn1−xMnxSe@C Nanorods and Nanowires

The carbon‐encapsulated, Mn‐doped ZnSe (Zn_1−xMn_xSe@C) nanowires, nanorods, and nanoparticles are synthesized by the solvent‐free, one‐step RAPET (reactions under autogenic pressure at elevated temperature) approach. The aspect ratio of the nanowires/nanorods is altered according to the Mn/Zn atomic ratio, with the maximum being observed for Mn/Zn = 1:20. A 10–20 nm amorphous carbon shell is evidenced from electron microscopy analysis. The replacement of Zn by Mn in the Zn_1−xMn_xSe lattice is confirmed by the hyperfine splitting values in the electron paramagnetic resonance (EPR) experiments. Raman experiments reveal that the Zn_1−xMn_xSe core is highly crystalline, while the shell consists of disordered graphitic carbon. Variable‐temperature cathodoluminescence measurements are performed for all samples and show distinct ZnSe near‐band‐edge and Mn‐related emissions. An intense and broad Mn‐related emission at the largest Mn alloy composition of 19.9% is further consistent with an efficient incorporation of Mn within the host ZnSe lattice. The formation of the core/shell nanowires and nanorods in the absence of any template or structure‐directing agent is controlled kinetically by the Zn_1−xMn_xSe nucleus formation and subsequent carbon encapsulation. Mn replaces Zn mainly in the (111) plane and catalyzes the nanowire growth in the [111] direction.     

High‐Efficient Deep‐Blue Light‐Emitting Diodes by Using High Quality ZnxCd1‐xS/ZnS Core/Shell Quantum Dots

High‐quality violet‐blue emitting Zn_xCd_1‐xS/ZnS core/shell quantum dots (QDs) are synthesized by a new method, called “nucleation at low temperature/shell growth at high temperature”. The resulting nearly monodisperse Zn_xCd_1‐xS/ZnS core/shell QDs have high PL quantum yield (near to 100%), high color purity (FWHM) <25 nm), good color tunability in the violet‐blue optical window from 400 to 470 nm, and good chemical/photochemical stability. More importantly, the new well‐established protocols are easy to apply to large‐scale synthesis; around 37 g Zn_xCd_1‐xS/ZnS core/shell QDs can be easily synthesized in one batch reaction. Highly efficient deep‐blue quantum dot‐based light‐emitting diodes (QD‐LEDs) are demonstrated by employing the Zn_xCd_1‐xS/ZnS core/shell QDs as emitters. The bright and efficient QD‐LEDs show a maximum luminance up to 4100 cd m^?2, and peak external quantum efficiency (EQE) of 3.8%, corresponding to 1.13 cd A^?1 in luminous efficiency. Such high value of the peak EQE can be comparable with OLED technology. These results signify a remarkable progress, not only in the synthesis of high‐quality QDs but also in QD‐LEDs that offer a practicle platform for the realization of QD‐based violet‐blue display and lighting.     

Hydrophilic Sparse Ionic Monolayer‐Protected Metal Nanoparticles: Highly Concentrated Nano‐Au and Nano‐Ag “Inks” that can be Sintered to Near‐Bulk Conductivity at 150 °C

Here, monolayer‐protected gold and silver nanoparticles with extremely high solvent dispersibility (over 200 mg mL^?1 in water and glycols) and low coalescence temperature (approximately 150 °C, measured by the percolation transition temperature T_p) are developed, to reach conductivities better than 1 × 10⁵ S cm^?1. These materials are suitable for inkjet and other forms of printing on substrates that may be solvent‐ and/or temperature‐sensitive, such as for plastic electronics, and as bus lines for solar and lighting panels. This is achieved using a new concept of the sparse ionic protection monolayer. The metal nanoparticles are initially protected by a two‐component mixed ligand shell comprising an ω‐functionalized ionic ligand and a labile ligand. These are selectively desorbed to give a sparse shell of the ω‐ionic ligands of ca. 25% coverage. Through a systematic study of different monolayer‐protected Au nanoparticles using FTIR spectroscopy, supported by XPS and DSC, it is shown that T_p is not determined by thermodynamic size melting or by surface area effects, as previously thought, but by the temperature when ca. 80% of the dense monolayer is eliminated. Therefore, T_p depends on the thermal stability and packing density of the shell, rather than the size of the metal core, while the solubility characteristics depend strongly on the exposed terminal group.     

Responsive Macroscopic Materials From Self‐Assembled Cross‐Linked SiO2‐PNIPAAm Core/Shell Structures

A way to obtain macroscopic responsive materials from silicon‐oxide polymer core/shell microstructures is presented. The microparticles are composed of a 60 nm SiO₂‐core with a random copolymer corona of the temperature responsive poly‐N‐isopropylacrylamide (PNIPAAm) and the UV‐cross‐linkable 2‐(dimethyl maleinimido)‐N‐ethyl‐acrylamide. The particles shrink upon heating and form a stable gel in both water and tetrahydrofuran (THF) at 3–5 wt% particle content. Cross‐linking the aqueous gel results in shrinkage when the temperature is increased above the lower critical solution temperature and it regains its original size upon cooling. By freeze drying with subsequent UV irradiation, thin stable layers are prepared. Stable fibers are produced by extruding a THF gel into water and subsequent UV irradiation, harnessing the cononsolvency effect of PNIPAAm in water/THF mixtures. The temperature responsiveness translates to the macroscopic materials as both films and fibers show the same collapsing behavior as the microcore/shell particle. The collapse and re‐swelling of the materials is related to the expelling and re‐uptake of water, which is used to incorporate gold nanoparticles into the materials by a simple heating/cooling cycle. This allows for future applications, as various functional particles (antibacterial, fluorescence, catalysis, etc.) can easily be incorporated in these systems.     

Poly(Acrylic Acid) Modification of Nd3+‐Sensitized Upconversion Nanophosphors for Highly Efficient UCL Imaging and pH‐Responsive Drug Delivery

In this work, a simple method is demonstrated for the synthesis of multifunctional core–shell nanoparticles NaYF₄:Yb,Er@NaYF₄:Yb@NaNdF₄:Yb@NaYF₄:Yb@PAA (labeled as Er@Y@Nd@Y@PAA or UCNP@PAA), which contain a highly effective 808‐nm‐to‐visible UCNP core and a thin shell of poly(acrylic acid) (PAA) to achieve upconversion bioimaging and pH‐sensitive anticancer chemotherapy simultaneously. The core–shell Nd³⁺‐sensitized UCNPs are optimized by varying the shell number, core size, and host lattices. The final optimized Er@Y@Nd@Y nanoparticle composition shows a significantly improved upconversion luminescence intensity, that is, 12.8 times higher than Er@Y@Nd nanoparticles. After coating the nanocomposites with a thin layer of PAA, the resulting UCNP@PAA nanocomposite perform well as a pH‐responsive nanocarrier and show clear advantages over UCNP@mSiO₂, which are evidenced by in vitro/in vivo experiments. Histological analysis also reveals that no pathological changes or inflammatory responses occur in the heart, lungs, kidneys, liver, and spleen. In summary, this study presents a major step forward towards a new therapeutic and diagnostic treatment of tumors by using 808‐nm excited UCNPs to replace the traditional 980‐nm excitation.     

Highly Stable Colloidal “Giant” Quantum Dots Sensitized Solar Cells

Colloidal quantum dots (QDs) are widely studied due to their promising optoelectronic properties. This study explores the application of specially designed and synthesized “giant” core/shell CdSe/(CdS)_x QDs with variable CdS shell thickness, while keeping the core size at 1.65 nm, as a highly efficient and stable light harvester for QD sensitized solar cells (QDSCs). The comparative study demonstrates that the photovoltaic performance of QDSCs can be significantly enhanced by optimizing the CdS shell thickness. The highest photoconversion efficiency (PCE) of 3.01% is obtained at optimum CdS shell thickness ≈1.96 nm. To further improve the PCE and fully highlight the effect of core/shell QDs interface engineering, a CdSe_x S_1?x interfacial alloyed layer is introduced between CdSe core and CdS shell. The resulting alloyed CdSe/(CdSe_x S_1?x )₅/(CdS)₁ core/shell QD‐based QDSCs yield a maximum PCE of 6.86%, thanks to favorable stepwise electronic band alignment and improved electron transfer rate with the incorporation of CdSe_x S_1?x interfacial layer with respect to CdSe/(CdS)₆ core/shell. In addition, QDSCs based on “giant” core/CdS‐shell or alloyed core/shell QDs exhibit excellent long‐term stability with respect to bare CdSe‐based QDSCs. The giant core/shell QDs interface engineering methodology offers a new path to improve PCE and the long‐term stability of liquid junction QDSCs.     

Si‐core/SiGe‐shell channel nanowire FET for sub‐10‐nm logic technology in the THz regime

The p‐type nanowire field‐effect transistor (FET) with a SiGe shell channel on a Si core is optimally designed and characterized using in‐depth technology computer‐aided design (TCAD) with quantum models for sub‐10‐nm advanced logic technology. SiGe is adopted as the material for the ultrathin shell channel owing to its two primary merits of high hole mobility and strong Si compatibility. The SiGe shell can effectively confine the hole because of the large valence‐band offset (VBO) between the Si core and the SiGe channel arranged in the radial direction. The proposed device is optimized in terms of the Ge shell channel thickness, Ge fraction in the SiGe channel, and the channel length (L_g) by examining a set of primary DC and AC parameters. The cutoff frequency (f_T) and maximum oscillation frequency (f_max) of the proposed device were determined to be 440.0 and 753.9 GHz when L_g is 5 nm, respectively, with an intrinsic delay time (τ) of 3.14 ps. The proposed SiGe‐shell channel p‐type nanowire FET has demonstrated a strong potential for low‐power and high‐speed applications in 10‐nm‐and‐beyond complementary metal‐oxide‐semiconductor (CMOS) technology.     

Multifunctional Core/Shell Nanoparticles Self‐Assembled from pH‐Induced Thermosensitive Polymers for Targeted Intracellular Anticancer Drug Delivery

Core/shell nanoparticles that display a pH‐sensitive thermal response, self‐assembled from the amphiphilic tercopolymer, poly(N‐isopropylacrylamide‐co‐N,N‐dimethylacrylamide‐co‐10‐undecenoic acid) (P(NIPAAm‐co‐DMAAm‐co‐UA)), have recently been reported. In this study, folic acid is conjugated to the hydrophilic segment of the polymer through the free amine group (for targeting cancer cells that overexpress folate receptors) and cholesterol is grafted to the hydrophobic segment of the polymer. This polymer also self‐assembles into core/shell nanoparticles that exhibit pH‐induced temperature sensitivity, but they possess a more stable hydrophobic core than the original polymer P(NIPAAm‐co‐DMAAm‐co‐UA) and a shell containing folate molecules. An anticancer drug, doxorubicin (DOX), is encapsulated into the nanoparticles. DOX release is also pH‐dependent. DOX molecules delivered by P(NIPAAm‐co‐DMAAm‐co‐UA) and folate‐conjugated P(NIPAAm‐co‐DMAAm‐co‐UA)‐g‐cholesterol nanoparticles enter the nucleus more rapidly than those transported by P(NIPAAm‐co‐DMAAm)‐b‐poly(lactide‐co‐glycolide) nanoparticles, which are not pH sensitive. More importantly, these nanoparticles can recognize folate‐receptor‐expressing cancer cells. Compared to the nanoparticles without folate, the DOX‐loaded nanoparticles with folate yield a greater cellular uptake because of the folate‐receptor‐mediated endocytosis process, and, thus, higher cytotoxicity results. These multifunctional polymer core/shell nanoparticles may make a promising carrier to target drugs to cancer cells and release the drug molecules to the cytoplasm inside the cells.     

Microwave Arcing Induced Formation and Growth Mechanisms of Core/Shell Metal/Carbon Nanoparticles in Organic Solutions

Well‐graphitized core/shell iron/carbon nanoparticles (Fe@CNPs) were formed in toluene solutions containing Fe(CO)₅‐C_60/70 via an novel microwave arcing process. High temperature γ‐Fe phase was found to be stable at room temperature when encapsulated inside graphene shells. In the absence of C_60/70, the structures of graphene shells are poor. Pre‐synthesized Co nanoparticles were used as templates for the growth of graphene shells in toluene‐C_60/70 solutions. Via acid etching and removal of the central core Co nanoparticles, hollow carbon nanoparticles could be obtained. Further thermal annealing by focused microwave irradiation leads to merging of small core/shell metal/carbon nanoparticles into large ones, as well as conversion of body centered cubic (bcc) α‐Fe to face centered cubic (fcc) γ‐Fe. The possible growth mechanisms of core/shell metal/carbon nanoparticles were discussed.     

Grain Boundary and Interface Passivation with Core–Shell Au@CdS Nanospheres for High‐Efficiency Perovskite Solar Cells

The plasmonic characteristic of core–shell nanomaterials can effectively improve exciton‐generation/dissociation and carrier‐transfer/collection. In this work, a new strategy based on core–shell Au@CdS nanospheres is introduced to passivate perovskite grain boundaries (GBs) and the perovskite/hole transport layer interface via an antisolvent process. These core–shell Au@CdS nanoparticles can trigger heterogeneous nucleation of the perovskite precursor for high‐quality perovskite films through the formation of the intermediate Au@CdS–PbI₂ adduct, which can lower the valence band maximum of the 2,2,7,7‐tetrakis(N,N‐di‐p‐methoxyphenyl‐amine)9,9‐spirobifluorene (Spiro‐OMeTAD) for a more favorable energy alignment with the perovskite material. With the help of the localized surface plasmon resonance effect of Au@CdS, holes can easily overcome the barrier at the perovskite/Spiro‐OMeTAD interface (or GBs) through the bridge of the intermediate Au@CdS–PbI₂, avoiding the carrier accumulation, and suppress the carrier trap recombination at the Spiro‐OMeTAD/perovskite interface. Consequently, the Au@CdS‐based perovskite solar cell device achieves a high efficiency of over 21%, with excellent stability of ≈90% retention of initial power conversion efficiencies after 45 days storage in dry air.     

Exploring Exchange Bias Coupling in Fe3−δO4@CoO Core–Shell Nanoparticle 2D Assemblies

Core‐shell ferro(i)magnetic@antiferromagnetic (F(i)M@AFM) nanoparticles exhibiting exchange bias coupling are very promising to push back the superparamagnetic limits. However, their intrinsic magnetic properties can be strongly affected by interparticle interactions. This work reports on the collective properties of Fe_3–dO₄@CoO core‐shell nanoparticles as function of the structure of their assembly. The structure of nanoparticle assembly is controlled by a copper (I) catalyzed alkyne–azide cycloaddition (CuAAC) “click” reaction between complementary functional groups located at the surface of both substrates and nanoparticles. 2D arrays of nanoparticles with tunable sizes ranging from clusters of few nanoparticles to a dense and homogenous monolayer were prepared. The spatial arrangement of nanoparticles strongly influences the exchange bias coupling which is significantly enhanced for large 2D nanoparticle assemblies and, even more in 3D assemblies such as powder, which favour weak and random dipolar interactions.     

Novel Au–SiO2–WO3 Core–Shell Composite Nanoparticles for Surface‐Enhanced Raman Spectroscopy with Potential Application in Cancer Cell Imaging

With the rapid development of nanotechnology during the last decades, the ability to detect and control individual objects at the nanoscale has enabled us to deal with complex biomedical challenges. In cancer imaging, novel nanoparticles (NPs) offer promising potential to identify single cancer cells and precisely label larger areas of cancer tissues. Herein, a new class of size tunable core–shell composite (Au–SiO₂–WO₃) nanoparticles is reported. These nanoparticles display an easily improvable ≈10³ surface‐enhanced Raman scattering (SERS) enhancement factor with a double Au shell for dried samples over Si wafers and several orders of magnitude for liquid samples. WO₃ core nanoparticles measuring 20–50 nm in diameter are sheathed by an intermediate 10–60 nm silica layer, produced by following the Stöber‐based process and Turkevich method, followed by a 5–20 nm thick Au outer shell. By attaching 4‐mercaptobenzoic acid (4‐MBA) molecules as Raman reporters to the Au, high‐resolution Raman maps that pinpoint the nanoparticles' location are obtained. The preliminary results confirm their advantageous SERS properties for single‐molecule detection, significant cell viability after 24 h and in vitro cell imaging using coherent anti‐stokes Raman scattering. The long‐term objective is to measure SERS nanoparticles in vivo using near‐infrared light.     

PbSe/PbS and PbSe/PbSexS1–x Core/Shell Nanocrystals

The synthesis of PbSe/PbS and PbSe/PbSe_xS_1–x core/shell nanocrystals (NCs) with luminescence quantum efficiencies of 45–55 % is reported. PbSe/PbS NCs are prepared via a two‐stage process, while the PbSe/PbSe_xS_1–x NCs are formed in a single‐stage procedure. The core/shell NCs exhibit an energy tuning of the exciton transitions, with respect to that of the core NC, that is dependent on the core diameter, shell thickness, and composition.     

A Micellar Route to Ordered Arrays of Magnetic Nanoparticles: From Size‐Selected Pure Cobalt Dots to Cobalt–Cobalt Oxide Core–Shell Systems

Starting with Co‐salt‐loaded inverse micelles, which form if the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) is dissolved in a selective solvent like toluene and CoCl₂ is added to the solution, monomicellar arrays of such micelles exhibiting a significant hexagonal order can be prepared on top of various substrates with tailored intermicellar distances and structure heights. In order to remove the polymer matrix and to finally obtain arrays of pure Co nanoparticles, the micelles are first exposed to an oxygen plasma, followed by a treatment in a hydrogen plasma. Applying in‐situ X‐ray photoelectron spectroscopy, it is demonstrated that: 1) The oxygen plasma completely removes the polymer, though conserving the original order of the micellar array. Furthermore, the resulting nanoparticles are entirely oxidized with a chemical shift of the Co 2p_3/2 line pointing to the formation of Co₃O₄. 2) By the subsequent hydrogen plasma treatment the nanoparticles are fully reduced to metallic Co. 3) By exposing the pure Co nanoparticles for 100 s to various oxygen partial pressures pequation/tex2gif-inf-5.gif, a stepwise oxidation is observed with a still metallic Co core surrounded by an oxide shell. The data allow the extraction of the thickness of the oxide shell as a function of the total exposure to oxygen (pequation/tex2gif-inf-7.gif × time), thus giving the opportunity to control the ferromagnetic–antiferromagnetic composition of an exchange‐biased magnetic system.     

One‐Step Preparation of Coaxial CdS–ZnS and Cd1–xZnxS–ZnS Nanowires

Preparation of coaxial (core–shell) CdS–ZnS and Cd_1–xZn_xS–ZnS nanowires has been achieved via a one‐step metal–organic chemical vapor deposition (MOCVD) process with co‐fed single‐source precursors of CdS and ZnS. Single‐source precursors of CdS and ZnS of sufficient reactivity difference were prepared and paired up to form coaxial nanostructures in a one‐step process. The sequential growth of ZnS on CdS nanowires was also conducted to demonstrate the necessity and advantages of the precursor co‐feeding practice for the formation of well‐defined coaxial nanostructures. The coaxial nanostructure was characterized and confirmed by high‐resolution transmission electron microscopy and corresponding energy dispersive X‐ray spectrometry analyses. The photoluminescence efficiencies of the resulting coaxial CdS–ZnS and Cd_1–xZn_xS–ZnS nanowires were significantly enhanced compared to those of the plain CdS and plain Cd_1–xZn_xS nanowires, respectively, owing to the effective passivation of the surface electronic states of the core materials by the ZnS shell.     

Facile Synthesis of Manganese‐Oxide‐Containing Mesoporous Nitrogen‐Doped Carbon for Efficient Oxygen Reduction

Developing low‐cost non‐precious metal catalysts for high‐performance oxygen reduction reaction (ORR) is highly desirable. Here a facile, in situ template synthesis of a MnO‐containing mesoporous nitrogen‐doped carbon (m‐N‐C) nanocomposite and its high electrocatalytic activity for a four‐electron ORR in alkaline solution are reported. The synthesis of the MnO‐m‐N‐C nanocomposite involves one‐pot hydrothermal synthesis of Mn₃O₄@polyaniline core/shell nanoparticles from a mixture containing aniline, Mn(NO₃)₂, and KMnO₄, followed by heat treatment to produce N‐doped ultrathin graphitic carbon coated MnO hybrids and partial acid leaching of MnO. The as‐prepared MnO‐m‐N‐C composite catalyst exhibits high electrocatalytic activity and dominant four‐electron oxygen reduction pathway in 0.1 M KOH aqueous solution due to the synergetic effect between MnO and m‐N‐C. The pristine MnO shows little electrocatalytic activity and m‐N‐C alone exhibits a dominant two‐electron process for ORR. The MnO‐m‐N‐C composite catalyst also exhibits superior stability and methanol tolerance to a commercial Pt/C catalyst, making the composite a promising cathode catalyst for alkaline methanol fuel cell applications. The synergetic effect between MnO and N‐doped carbon described provides a new route to design advanced catalysts for energy conversion.     

Twin Engineering in Solution‐Synthesized Nonstoichiometric Cu5FeS4 Icosahedral Nanoparticles for Enhanced Thermoelectric Performance

A facile colloidal solution method has been developed for the fast, scalable synthesis of orthorhombic@cubic core–shell nonstoichiometric Cu₅FeS₄ icosahedral nanoparticles. Such nanoparticles contain high‐density twin boundaries in the form of fivefold twins. Spark plasma sintering consolidates the nanoparticles into nanostructured pellets, which retain high‐density twin boundaries and a tuned fraction of the secondary phase Fe‐deficient cubic Cu₅FeS₄. As a result, the thermal and electrical transport properties are synergistically optimized, leading to an enhanced zT of ≈0.62 at 710 K, which is about 51% higher than that of single‐phase Cu₅FeS₄. This study provides an energy‐efficient approach to realize twin engineering in nonstoichiometric Cu₅FeS₄ nanomaterials for high‐performance thermoelectrics.