Microbiological quality of fresh lettuce from organic and conventional production

Previously there was no available information on the levels of indicator bacteria and the prevalence of pathogens in fresh lettuce grown in organic and conventional farms in Spain. A total of 72 lettuce samples (18 farms for 4 repetitions each) for each type of the agriculture were examined in order to assess the bacteriological quality of the lettuces, in particular the prevalence of selected pathogens. The lettuce samples were analyzed for the presence of aerobic mesophilic, psychrotrophic microorganisms, yeasts and moulds, Enterobacteriaceae, mesophilic lactic acid bacteria, Pseudomonas spp. and presumptive Escherichia coli, Salmonella spp. and Listeria monocytogenes. The mean aerobic mesophilic counts (AM) were 6.35 ± 0.69 log₁₀ cfu g⁻¹ and 5.67 ± 0.80 log₁₀ cfu g⁻¹ from organic and conventional lettuce, respectively. The mean counts of psychrotrophic microorganisms were 5.82 ± 1.01 log₁₀ cfu g⁻¹ and 5.41 ± 0.92 log₁₀ cfu g⁻¹ from organic and conventional lettuce, respectively. Yeasts and moulds (YM) mean counts were 4.74 ± 0.83 log₁₀ cfu g⁻¹ and 4.21 ± 0.96 log₁₀ cfu g⁻¹ from organic and conventional lettuce, respectively. Lactic acid bacteria (LAB) were present in low numbers and the mean counts were 2.41 ± 1.10 log₁₀ cfu g⁻¹ and 1.99 ± 0.91 log₁₀ cfu g⁻¹ from organic and conventional lettuce, respectively. Pseudomonas spp. mean counts were 5.49 ± 1.37 log₁₀ cfu g⁻¹ and 4.98 ± 1.26 log₁₀ cfu g⁻¹ in organic and conventional lettuce, respectively. The mean counts for Enterobacteriaceae were 5.16 ± 1.01 log₁₀ cfu g⁻¹ and 3.80 ± 1.53 log₁₀ cfu g⁻¹ in organic and conventional lettuce, respectively. E. coli was detected in 22.2% (16 samples) of organic lettuce and in 12.5% (9 samples) of conventional lettuce. None of the lettuce samples was positive for E. coli O157:H7, L. monocytogenes and Salmonella spp. From the samples analyzed by principal component analysis (PCA) a pattern with two different groups (conventional and organic) can be observed, being the highest difference between both kinds of samples the Enterobacteriaceae count.     

Development of a real-time RT-PCR method for enumeration of viable Bifidobacterium longum cells in different morphologies

Viability of probiotic bacteria is traditionally assessed by plate counting which has several limitations, including underestimation of cells in aggregates or chains morphology. We describe a quantitative PCR (qPCR)-based method for an accurate enumeration of viable cells of Bifidobacterium longum NCC2705 exhibiting different morphologies by measuring the mRNA levels of cysB and purB, two constitutively expressed housekeeping genes. Three primer-sets targeting short fragments of 57-bp of cysS and purB and one 400-bp fragment of purB were used. Cell quantification of serially diluted samples showed a good correlation coefficient of R² 0.984 ± 0.003 between plate counts and qRT-PCR for all tested primer sets. Loss of viable cells exposed to a lethal heat stress (56 °C, 10, 20 and 30 min) was estimated by qRT-PCR and plate counts. No significant difference was observed using qRT-PCR targeting the 400-bp fragment of purB compared to plate counts indicating that this fragment is a suitable marker of cell viability. In contrast, the use of the 57-bp fragments led to a significant overestimation of viable cell counts (18 ± 3 and 7 ± 2 fold for cysB and purB, respectively). Decay of the mRNA fragments was studied by treatment of growing cells with rifampicin prior qRT-PCR. The 400-bp fragment of purB was faster degraded than the 57-bp fragments of cysB and purB. The 400-bp fragment of purB was further used to enumerate viable cells in aggregate state. Cell counts were more than 2 log₁₀ higher using the qRT-PCR method compared to plate counts.     

Effects of different sanitizing treatments on biofilms and attachment of Escherichia coli and Listeria monocytogenes on green leaf lettuce

The effects of ozone (2 mg/L), chlorine (100 mg/L) and organic acid (0.25 g/100 g citric acid plus 0.50 g/100 g ascorbic acid) treatments at 10 °C for 2 min on the removal of Escherichia coli and Listeria monocytogenes cells embedded inside biofilms on the surface of lettuce leaves were studied. None of the sanitizing treatments were found effective in removing the bacterial biofilms. Initiation of biofilms was observed after 24 h of incubation. Bacterial cells appeared as individual cells, rather than clusters after 6 h incubation, thus 99.9% reductions in both E. coli and L. monocytogenes counts were achieved with all the three treatments. However, after 48 h incubation, none of the treatments resulted in higher than 90% reduction in microbial counts. Biofilm formation was demonstrated for the 48 h incubated samples with SEM images.     

Effect of mash maceration and ripening stage of apples on phenolic compounds and antioxidant power of cloudy juices: A study using chemometrics

The effects of different enzymatic preparations on total phenolic content, phenolic profile (HPLC), and ferric reducing antioxidant power (FRAP) of cloudy juices from Lis Gala and Fuji Suprema apples varieties, at three ripening stages (unripe, ripe and senescent) were investigated using Principal Component Analysis and Hierarchical Cluster Analysis. The commercial preparations enzymatic (Ultrazym^® AFPL; Pectinex^® Ultra Clear; Pectinex^® SMASH XXL; Panzym^® YieldMASH) increased the total phenolic compounds and ferric reducing capacity of the cloudy juice from unripe and ripe Lis Gala (respectively by 67 and 49% for unripe apples, and 28 and 33% for ripe apples) and unripe Fuji Suprema apples (23 and 55%), while for the ripe Fuji Suprema apples only Pectinex^® Ultra Clear and Panzym^® YieldMASH had this effect. No significant (p > 0.05) was observed on senescent stage, whatever the enzymatic preparation. Enzymatic preparations could increase phenolic compounds concentration and antioxidant capacity of cloudy apple juice, but this effect depended on the maturity of the apples.     

Antagonistic effect of Pseudomonas graminis CPA-7 against foodborne pathogens in fresh-cut apples under simulated commercial conditions

Recently, we reported that the application of the strain CPA-7 of Pseudomonas graminis, previously isolated from apple, could reduce the population of foodborne pathogens on minimally processed (MP) apples and peaches under laboratory conditions. Therefore, the objective of the present work was to find an antioxidant treatment and a packaging atmosphere condition to improve CPA-7 efficacy in reducing a cocktail of four Salmonella and five Listeria monocytogenes strains on MP apples under simulated commercial processing. The effect of CPA-7 application on apple quality and its survival to simulated gastric stress were also evaluated. Ascorbic acid (2%, w/v) and N-acetyl-l-cysteine (1%, w/v) as antioxidant treatments reduced Salmonella, L. monocytogenes and CPA-7 recovery, meanwhile no reduction was observed with NatureSeal^® AS1 (NS, 6%, w/v). The antagonistic strain was effective on NS-treated apple wedges stored at 10 °C with or without modified atmosphere packaging (MAP). Then, in a semi-commercial assay, efficacy of CPA-7 inoculated at 10⁵ and 10⁷ cfu mL⁻¹ against Salmonella and L. monocytogenes strains on MP apples with NS and MAP and stored at 5 and 10 °C was evaluated. Although high CPA-7 concentrations/populations avoided Salmonella growth at 10 °C and lowered L. monocytogenes population increases were observed at both temperatures, the effect was not instantaneous. No effect on apple quality was detected and CPA-7 did not survived to simulated gastric stress throughout storage. Therefore, CPA-7 could avoid pathogens growth on MP apples during storage when use as part of a hurdle technology in combination with disinfection techniques, low storage temperature and MAP.     

Biofilm formation on stainless steel as a function of time and temperature and control through sanitizers

Enterococcus spp. contamination was screened from a Minas Frescal cheese processing line. Biofilm formation of Enterococcus faecium and Enterococcus faecalis isolates was evaluated and the effect of sanitization procedures in the control of these biofilms was investigated. Enterococcus spp. were detected in raw milk, milk machine, door handle, floor, drain, thermometer, and Minas Frescal cheese. Biofilm formation on stainless steel was modelled as a function of time (0, 1.2, 4, 6.8, and 8 days) and temperature (7, 13, 27, 41, and 47 °C) using response surface methodology. The model showed that E. faecium biofilms were formed from 1 to 8 days at 12–47 °C, while E. faecalis biofilms were formed from 1 to 8 days at 10–43 °C. None of the sanitizers (sodium hypochlorite 100 mg L⁻¹, peracetic acid 300 mg L⁻¹, and chlorhexidine digluconate 400 mg L⁻¹) was able to completely eliminate the biofilms.     

The efficacy and persistence of diatomaceous earths admixed with commodity against four tropical stored product beetle pests

The efficacy and persistence of two commercially available enhanced diatomaceous earth (DE) products (Dryacide^® and Protect-It^®) against four common tropical storage pests (Prostephanus truncatus, Sitophilus zeamais, Callosobruchus maculatus and Acanthoscelides obtectus) were studied when admixed with typical host commodities at different application rates and relative humidities. Persistence of the enhanced DE treatments was considered after 3 and 6 months storage by assessment of both adult mortality and F1 progeny emergence. Both DEs usually increased parental mortality and reduced progeny emergence of all four insect species in comparison with the untreated control at both 50% and 60% r.h., and at all storage periods. However, efficacy was inversely related to duration of storage and over time the host commodity also became less suitable for insect development. Each insect species differed in its susceptibility to the DE treatments, highlighting the need for field application rates to be based upon the entire spectrum of pest species likely to be present during storage.     

Evaluation of ISO 10272:2006 standard versus alternative enrichment and plating combinations for enumeration and detection of Campylobacter in chicken meat

In the present study, we evaluate the recommended ISO 10272:2006 versus alternative procedures for Campylobacter enumeration and enrichment in naturally contaminated chicken meat samples (n = 49). Three enrichment media were evaluated; Bolton broth, Preston broth and CampyFood broth^® (bioMérieux SA, Marcy l’Etoile, France). In addition, three selective plating agars were compared; modified charcoal cefoperazone deoxycholate agar (mCCDA), CampyFood agar^® (CFA; bioMérieux SA) and Brilliance CampyCount agar^® (BCC; Oxoid, Basingstoke, England). Direct plating on CFA provided the highest number of Campylobacter positive samples (17/49); however this was not statistically different (P > 0.05) from numbers of positive samples recovered by direct plating on mCCDA (15/49) or BCC agars (14/49). Also, there was no significant difference between Campylobacter counts on the three compared media (P > 0.05). The coloured colonies of Campylobacter on CFA and BCC were easier to record and count than those on mCCDA. Enrichment of chicken meat samples in Bolton broth for 48 h and subsequent plating on CFA provided significantly higher (P < 0.05) Campylobacter detection compared to the other broth-agar combinations. Enrichment in Preston broth for 24 h followed by plating on mCCDA gave a higher number of positive samples (20/49) than 48 h enrichment in Bolton broth and plating on mCCDA (15/49). Enrichment in Bolton broth for 48 h followed by plating on CFA recovered 35% of samples below the limit for quantifications (<10 CFU/g, n = 34), as identified by direct plating on mCCDA. Compared to the current ISO method, some alternative combinations of enrichment and agar media could provide significantly better detection and enumeration of Campylobacter in chicken meat.     

Influence of cell surface hydrophobicity on attachment of Campylobacter to abiotic surfaces

This work aimed to investigate the influence of physicochemical properties and prior mode of growth (planktonic or sessile culture) on attachment of 13 Campylobacter jejuni strains and 5 Campylobacter coli strains isolated from chicken samples to three abiotic surfaces: stainless steel, glass and polyurethane. Water contact angle and zeta potential measurements indicated that the strains varied with respect to surface hydrophobicity (17.6 ± 1.5 to 53.0 ± 2.3°) and surface charge (−3.3 ± 0.4 to −15.1 ± 0.5 mV). Individual strains had different attachment abilities to stainless steel and glass (3.79 ± 0.16 to 5.45 ± 0.08 log cell cm⁻²) but did not attach to polyurethane, with one exception. Attachment of Campylobacter to abiotic surfaces significantly correlated with cell surface hydrophobicity (P ≤ 0.007), but not with surface charge (P ≥ 0.507). Cells grown as planktonic and sessile culture generally differed significantly from each other with respect to hydrophobicity and attachment (P < 0.05), but not with respect to surface charge (P > 0.05). Principal component analysis (PCA) clustered strains into three groups (planktonic culture) and two groups (sessile culture) representing those with similar hydrophobicity and attachment. Of the four highly hydrophobic and adherent strains, three were C. coli suggesting that isolates with greater hydrophobicity and adherence may occur more frequently among C. coli than C. jejuni strains although this requires further investigation using a larger number of strains. Assignment of pulsed-field gel electrophoresis profiles to PCA groups using Jackknife analysis revealed no overall relationship between bacterial genotypes and bacterial attachment. No relationship between serotype distribution and bacterial attachment was apparent in this study.     

Exposure to 222 nm far UV-C effectively inactivates planktonic foodborne pathogens and inhibits biofilm formation

This study investigated the performance of a 222 nm far-UV-C krypton-chloride excilamp for inactivation of major foodborne pathogenic and spoilage bacteria in thin liquid films (TLF, 1.2 mm thickness), on solid stainless steel surfaces (SS), and against biofilm formation on SS. Both gram-positives (Listeria monocytogenes, Staphylococcus aureus) and gram-negatives (Escherichia coli O157:H7, Pseudomonas aeruginosa) (10⁹ CFU/mL starting concentration) were exposed to 222 nm light at cumulative doses of up to 354 mJ/cm². Significant (P < 0.05) reductions (1.4–5.1 log CFU) were found for all bacteria, and inactivation kinetics was described well by the Weibull model (0.77 ≤ R² ≤ 0.95). Substrate type (i.e., TLF vs. SS) substantially impacted treatment efficacy. No detectable resistance of L. monocytogenes was developed after repeated exposure to 222 nm in TLF. The 222 nm treatment also effectively minimized biofilm formation and growth by S. aureus and P. aeruginosa and increased the surviving cells' susceptibility to sodium hypochlorite by at least 2 fold.Industrial relevanceThis work demonstrates that 222 nm krypton-chloride excilamps can be used to effectively inactivate planktonic bacteria and inhibit biofilm formation and growth. This recommends them for use as novel nonthermal light-based systems for mitigation of pathogens and biofilms in a range of applications, including food processing, food service, and clinical environments.     

Bactericidal Effect of Calcium Oxide (Scallop‐Shell Powder) Against Pseudomonas aeruginosa Biofilm on Quail Egg Shell,Stainless Steel,Plastic, and Rubber

The aim of this study was to evaluate the bactericidal effect of calcium oxide (CaO) against Pseudomonas aeruginosa biofilms on quail eggshells and major egg contacting surfaces (stainless steel, plastic, and rubber). The samples were subjected to CaO treatments (0%, 0.01%, 0.05%, 0.10%, 0.15%, 0.20%, 0.25%, and 0.30%) for 1 min. All the CaO treatments significantly reduced P. aeruginosa biofilms on all tested surfaces as compared to controls. In comparison of biofilm stability, the strongest and most resistant biofilm was formed on eggshell against the CaO treatment, followed by rubber, stainless steel, and plastic. In evaluation of bactericidal effect, the largest reduction (3.16 log CFU) was observed in plastic even at the lowest concentration of CaO (0.01%), whereas the least reduction was found in eggshells, regardless of CaO concentration. In addition, stainless steel showed a significant reduction in biofilm formation at all concentrations except 0.10% to 0.15% CaO. At 0.30% CaO, the reduction of P. aeruginosa in biofilms on stainless steel, plastic, rubber, and eggshell were 5.48, 6.37, 4.87, and 3.14 log CFU/cm² (CFU/egg), respectively. Biofilm reduction after CaO treatment was also observed by field emission scanning electron microscopy (FE‐SEM). Based on the FE‐SEM images, we observed that P. aeruginosa biofilms formed compact aggregations on eggshell surfaces with CaO treatments up to 0.30%. More specifically, a 0.20% CaO treatment resulted in the reductions of 3 to 6 log CFU in all materials.     

Comparative residual toxicities of carbaryl, deltamethrin and permethrin as structural treatments against three liposcelidid psocid species (Psocoptera: Liposcelididae) infesting stored commodities

Residual toxicities of carbaryl, deltamethrin and permethrin were evaluated as surface treatments on concrete (porous surface) and galvanized steel (non-porous surface) panels (0.3×0.3 m²) against adults of Liposcelis bostrychophila Badonnel, Liposcelis entomophila (Enderlein), and Liposcelis paeta Pearman. Residual toxicities of these chemicals were assessed at 30±1°C, 70±2% r.h., and a photoperiod of 12 : 12 h (L:D), one day after treatment (0 wk) and thereafter at wk 1, 2, 4, 6, 8, and then every 4 wk up to wk 40. Mortality was recorded after exposure periods of 6 h, and then every 24 h until end-point was achieved. Liposcelis bostrychophila was the most susceptible species to the three chemicals tested, followed by L. paeta, and L. entomophila. Deltamethrin on concrete and permethrin on steel were the most successful chemicals, whereas permethrin on concrete and carbaryl on steel were the least successful against all three species. We conclude that for long-term protection, none of the chemicals studied is suitable against any of the three psocid species on concrete storage surfaces. On steel surfaces, only permethrin would deliver long-term protection up to 40 wk against L. bostrychophila and L. paeta infestations. This chemical however, will fail to provide long-term control against infestations where L. entomophila is present.     

Persistent Listeria monocytogenes subtypes isolated from a smoked fish processing facility included both phage susceptible and resistant isolates

Contamination of Ready-To-Eat foods with Listeria monocytogenes can typically be traced back to post-processing contamination from environmental sources; contamination is often linked to subtypes that persist in food associated environments. Although phage-based biocontrol strategies have been proposed for controlling this pathogen, information on the efficacy of phage treatment against diverse L. monocytogenes subtypes from food associated environments is still limited. We identified subtypes that were repeatedly found (“persistent”) in a smoked fish processing facility by using EcoRI ribotyping data for isolates obtained in 1998–2009. PFGE analysis of 141 isolates (9 ribotypes) supported persistence for up to 11 years. Characterization of selected isolates, representing persistent subtypes, against a panel of 28 listeriaphages showed a wide range of likelihood of phage susceptibility, ranging from 4.6% (for 7 ribotype DUP-1043A isolates) to 95.4% (for 7 ribotype DUP-1044A isolates). In challenge studies with 10⁵ and 10⁶ CFU/ml L. monocytogenes, using phage cocktails and a commercial phage product at different phage-host ratios, one isolate (ribotype DUP-1043A) was not affected by any treatment. A reduction in L. monocytogenes counts of up to 4 log units was observed, after 8 h of treatment, in isolates of two ribotypes, but subsequent re-growth occurred. Survivor isolates obtained after 24 h of treatment showed decreased susceptibility to individual phages included in the phage cocktail, suggesting rapid emergence of resistant subtypes.     

Biodiversity of psychrotrophic bacteria of the Bacillus cereus group collected on farm and in egg product industry

The aim of the present study was (i) to type, by genotypic and phenotypic methods, a collection of psychrotrophic bacteria belonging to the Bacillus cereus group collected in a farm and in 6 egg breaking companies during a period covering a warm and a cold season, and (ii) to characterize the growth potential in liquid whole egg, and the sanitary risk potential (cytotoxic activity on Caco-2 cells and adhesion on stainless steel) of each isolate of the collection. The investigation of specific psychrotrophic and mesophilic signatures together with the study of ability to grow at 6 °C and/or at 43 °C on optimal agar medium allowed highlighting twelve profiles, the major one corresponding to the species Bacillus weihenstephanensis (46.2% of the collection). The diversity of the profiles depended on the season and on the origin of the isolates. All the isolates were able to grow at the same level in liquid whole egg and in optimal medium, even at low temperature. Under the same conditions, the cytotoxic activity depended on the isolate, the medium and the temperature. At 10 °C, no isolate was cytotoxic in liquid whole egg and only one, belonging to the Bacillus weihenstephansensis species, in the optimal medium. All the isolates were able to adhere on stainless steel at various levels, from 2.6 ± 0.2 log cfu/cm² to 4.9 ± 0.1 log cfu/cm². A large majority (80.8%) was strongly adhering and could lead to the formation of biofilms in industrial equipments.     

Comparison of inactivation of Listeria monocytogenes within a biofilm matrix using chlorine dioxide gas,aqueous chlorine dioxide and sodium hypochlorite treatments

The present research compared the effect of chlorine dioxide (CD) gas, aqueous CD and aqueous sodium hypochlorite (SHC) treatments on the inactivation of a five strain mixture of Listeria monocytogenes – containing biofilms. Four day old biofilms were developed on a stainless steel (SS 304) coupon by using a mixture of five cultures of L. monocytogenes (Scott A, N1-227, 103M, 82 and 311) using a 100% relative humidity (RH) dessicator for incubation at room temperature (22 ± 2 °C). After biofilm development, coupons were rinsed and dried for 2 h and treated with 0.3 mg/l CD gas at 75% RH, 7 mg/l of aqueous CD and 50 mg/l SHC. Initial log₁₀ population of biofilm cells before CD gas, aqueous CD and SHC treatment was 4.80, 5.09 and 4.95 log₁₀ CFU/cm². The Weibull model was used to fit non-linear survivor curves. Treatments and time points of 0.3 mg/l CD gas and 7 mg/l aq. CD solution were significantly different (p < 0.05). A 10 min treatment of 0.3 mg/l CD gas, 7 mg/l of aq. CD, and 50 mg/l SHC resulted in reductions of 3.21, 3.74 and 3.09 log₁₀ CFU/cm², respectively. At 10 min, all treatments were not statistically different (p > 0.05). Low levels of CD (0.3 mg/l CD gas and 7 mg/l aq. CD solution) for 10 min resulted in similar log reductions compared to 50 mg/l SHC.     

Prevalence and counts of Salmonella spp. in minimally processed vegetables in São Paulo, Brazil

Minimally processed vegetables (MPV) may be important vehicles of Salmonella spp. and cause disease. This study aimed at detecting and enumerating Salmonella spp. in MPV marketed in the city of São Paulo, Brazil. A total of 512 samples of MPV packages collected in retail stores were tested for Salmonella spp. and total coliforms and Escherichia coli as indication of the hygienic status. Salmonella spp. was detected in four samples, two using the detection method and two using the counting method, where the results were 8.8 × 10² CFU/g and 2.4 × 10² CFU/g. The serovars were Salmonella Typhimurium (three samples) and Salmonella enterica subsp. enterica O:47:z4,z23:- (one sample). Fourteen samples (2.7%) presented counts of E. coli above the maximum limit established by the Brazilian regulation for MPV (10² CFU/g). Therefore, tightened surveillance and effective intervention strategies are necessary in order to address consumers and governments concerns on safety of MPV.     

Reduction of Escherichia coli O157:H7 in Biofilms Using Bacteriophage BPECO 19

Biofilm formation is a growing concern in the food industry. Escherichia coli O157:H7 is one of the most important foodborne pathogens that can persists in food and food‐related environments and subsequently produce biofilms. The efficacy of bacteriophage BPECO 19 was evaluated against three E. coli O157:H7 strains in biofilms. Biofilms of the three E. coli O157:H7 strains were grown on abiotic (stainless steel, rubber, and minimum biofilm eradication concentration [MBEC^TM] device) and biotic (lettuce) surfaces at different temperatures. The effectiveness of bacteriophage BPECO 19 in reducing preformed biofilms on these surfaces was further evaluated by treating the surfaces with a phage suspension (10⁸ PFU/mL) for 2 h. The results indicated that the phage treatment significantly reduced (P  < 0.05) the number of adhered cells in all the surfaces. Following phage treatment, the viability of adhered cells was reduced by ≥3 log CFU/cm², 2.4 log CFU/cm², and 3.1 log CFU/peg in biofilms grown on stainless steel, rubber, and the MBEC^TM device, respectively. Likewise, the phage treatment reduced cell viability by ≥2 log CFU/cm² in biofilms grown on lettuce. Overall, these results suggested that bacteriophages such as BPECO 19 could be effective in reducing the viability of biofilm‐adhered cells.     

Resistance to benzalkonium chloride, peracetic acid and nisin during formation of mature biofilms by Listeria monocytogenes

Increase of resistance to the application of benzalkonium chloride (BAC), peracetic acid (PA) and nisin during biofilm formation at 25 °C by three strains of Listeria monocytogenes (CECT 911, CECT 4032, CECT 5873 and BAC-adapted CECT 5873) in different scenarios was compared. For this purpose, resistance after 4 and 11-days of biofilm formation was quantified in terms of lethal dose 90% values (LD₉₀), determined according with a dose-response logistic mathematical model. Microscopic analyses after 4 and 11-days of L. monocytogenes biofilm formation were also carried out. Results demonstrated a relation between the microscopic structure and the resistance to the assayed biocides in matured biofilms. The worst cases being biofilms formed by the strain 4032 (in both stainless steel and polypropylene), which showed a complex “cloud-type” structure that correlates with the highest resistance of this strain against the three biocides during biofilm maturation. However, that increase in resistance and complexity appeared not to be dependent on initial bacterial adherence, thus indicating mature biofilms rather than planctonic cells or early-stage biofilms must be considered when disinfection protocols have to be optimized. PA seemed to be the most effective of the three disinfectants used for biofilms. We hypothesized both its high oxidizing capacity and low molecular size could suppose an advantage for its penetration inside the biofilm. We also demonstrated that organic material counteract with the biocides, thus indicating the importance of improving cleaning protocols. Finally, by comparing strains 5873 and 5873 adapted to BAC, several adaptative cross-responses between BAC and nisin or peracetic acid were identified.     

The potential of atmospheric air cold plasma for control of bacterial contaminants relevant to cereal grain production

The aim of this work was to investigate the efficacy of dielectric barrier discharge atmospheric cold plasma (DBD ACP) against bacteria associated with grains quality and safety. ACP inactivation efficacy was tested against biofilms formed by different strains of E. coli, Bacillus and Lactobacillus in grain model media and against B. atrophaeus endospores either in grain media or attached on abiotic surfaces. Effects were dependent on bacterial strain, media composition and mode of ACP exposure. ACP treatment for 5 min reduced E. coli spp., B. subtilis and Lactobacillus spp. biofilms by > 3 log₁₀, whereas insignificant reductions were achieved for B. atrophaeus. ACP treatment of 5–20 min reduced B. atrophaeus spores in liquids by > 5 log₁₀. Treatment for 30 min reduced spores on hydrophobic surface by > 6 log₁₀, whereas maximum of 4.4 log reductions were achieved with spores attached to hydrophilic surface. Microscopy demonstrated that ACP caused significant damage to spores. In package ACP treatment has potential to inactivate grain contaminants in the form of biofilms, as well as spores and vegetative cells.Industrial relevanceThis study demonstrates that ACP technology is a promising tool for effective bio-decontamination which offers a wide range of possible applications including inactivation of microorganisms on cereal grains. However, due to the nature of the microbial contamination of grains and complex grain structures it may be necessary to optimise the potential for surface inactivation at several stages of grain processing and storage to enhance ACP efficacy against bacterial endospores.     

Effect of carvacrol and thymol on Salmonella spp. biofilms on polypropylene

The present study evaluated the effects of carvacrol and thymol against Salmonella spp. biofilm on polypropylene. The efficacy of the compounds was assessed by quantifying Salmonella spp. cells during and after biofilm formation on polypropylene and performing scanning electron microscopy. During biofilm formation, carvacrol and thymol, at subinhibitory concentrations, reduced bacterial counts about 1–2 log, while established Salmonella spp. biofilms were reduced about 1–5 log by carvacrol and thymol, at MIC or 2× MIC. The greatest reduction in carvacrol‐treated biofilms, about 5 log, was observed with 156 and 312 μg mL^?1 (MIC and 2× MIC) in established Salmonella Typhimurium ATCC 14028 biofilms. Thymol showed the greatest reduction, about 4 log, at 624 μg mL^?1 (2× MIC) against mature Salmonella Enteritidis biofilm. Carvacrol and thymol reduced the number of Salmonella spp. cells on polypropylene, suggesting their potential for the control of Salmonella spp. biofilms.