Characteristics of gelatin from the skin of unicorn leatherjacket (Aluterus monoceros) as influenced by acid pretreatment and extraction time

Gelatins from the skin of unicorn leatherjacket (Aluterus monoceros) pretreated with different acids (0.2 M acetic acid or 0.2 M phosphoric acid) and extracted with distilled water at 45 °C for various times (4 and 8 h) were characterized. Yields of 5.23–9.18 or 6.12–11.54% (wet weight basis) were obtained for gelatins extracted from the skin pretreated with 0.2 M acetic acid or 0.2 M phosphoric acid, respectively. Extracted gelatins contained α₁ and α₂ chains as the predominant components and some degradation peptides. The absorption bands of gelatins in FTIR spectra were mainly situated in the amide band region (amide I, amide II and amide ???) and showed the significant loss of molecular order of triple helix. Gelatin samples had a relative solubility greater than 90% in the wide pH ranges (1–10). The gel strength of gelatin from skin pretreated with phosphoric acid (GPA) was higher than that of gelatin from skin pretreated with acetic acid (GAA). Both GPA and GAA had the lower gel strength than that of commercial bovine gelatin (P < 0.05). Net charge of GAA and GPA became zero at pHs of 6.64–7.15 and 6.78–7.26, respectively, as determined by zeta potential titration. Emulsifying and foaming properties of GAA and GPA increased with increasing concentrations (1–3%, w/v). Those properties were governed by pretreatments and extraction time. Thus gelatin can be successfully extracted from unicorn leatherjacket skin using the appropriate acid pretreatment and extraction time.     

Effect of EDTA, HCl, and Citric Acid on Ca Salt Removal from Asian (Silver) Carp Scales Prior to Gelatin Extraction

ABSTRACT:  Pretreatments with different chemicals at different concentrations to remove Ca compounds were studied to determine their effects on gelatin extraction from silver carp ( Hypophthalmichthys molitrix ) scales. During Ca removal with HCl, citric acid, and EDTA, all 3 chemicals were able to decalcify (>90%) scales; however, protein losses with EDTA were lower than with HCl and citric acid ( P  < 0.05), and protein losses with citric acid were lower than with HCl ( P  < 0.05). Ca removal with HCl yielded a solution where 4% to 5% of the protein was Hyp, with estimated gelatin losses from 0.9% to 2.5%. After 0.20 mol/L HCl was used for Ca removal, the extracted gelatin solution was 15.4% of the initial scales weight and gave a gel strength of 128 g. After using 1.2 g/L citric acid for Ca removal, the extracted gelatin solution was only 9% of the scales and the gel strength was 97 g. Using 0.20 mol/L EDTA for Ca removal gave a yield of 22% and a gel strength of 152 g. These data suggest that EDTA at 0.20 mol/L provides the best Ca removal with minimal collagen/gelatin removal (estimated gelatin loss was less than 0.013%) during the Ca removal step, and subsequently gave a high gelatin yield and gel strength. Fish gelatin has generally been extracted from fish skins and occasionally fish bones. This article focuses on removing the Ca compounds in fish scales and then producing fish gelatin with a good gel strength and yield. With further studies, this study may help the fish industry to have a new source of fish gelatin for food and pharmaceutical applications.     

Structural Characteristics of Tilapia (Oreochromis mossambicus) Bone Gelatin: Effects of Different Liming Methods

Fish bone is a good source of gelatin. In this study, gelatins were prepared from tilapia bone after the bone was pretreated with alkali protease, desalted immediately by 0.6 mol L^?1 HCl, and hydrolyzed by papain or limed by Ca(OH)₂. Gelatins extracted from papain-treated tilapia bone exhibited space structures similar to those of alkali-treated tilapia bone. Despite this similarity, many differences were observed between these gelatin samples. Compared with alkali-treated gelatin, papain-treated gelatins showed higher values for imino residue content, molecular weight proportion, bloom strength, and viscosity. The bloom strengths of the second and third papain-treated gelatins were 163 and 94 bloom, respectively, which were lower than the bloom strength of the first papain-treated gelatin (189 bloom). The viscosities of the three papain-treated gelatin samples were 4.18, 2.81, and 0.51 mPa.s^?1. The first papain-treated gelatin achieved the highest gelling (16 °C) and melting points (23.9 °C). The yields of the first (5.40%) and second (6.71%) papain-treated gelatins were higher than those of the alkali-treated gelatins (3.33 and 5.76%, respectively). However, the yield of the third papain-treated gelatin (2.27%) was lower than that of the third alkali-treated gelatin (5.42%). More importantly, papain hydrolysis can prevent destruction by Ca(OH)₂ in the bone structure and effectively reduce the denaturation temperature of tilapia bone collagen. Moreover, papain hydrolysis can dramatically reduce the time required for liming (0.8% of traditional liming process spent). Papain hydrolysis is a clean production method that can replace traditional liming.     

Characteristics of the gelatin extracted from Channel Catfish (Ictalurus Punctatus) head bones

Three gelatins were prepared from channel catfish head bones by hot water after the head was pretreated with alkali protease, quickly desalted by 0.4 mol/L HCl and soaked in 9 g/L Ca(OH)₂. The extraction conditions of gelatins were 5 °C, pH 4.0, 4 h, 82 °C, pH 2.5, 2 h and 90 °C, pH 3.0, 3 h, respectively. The studies showed there were many differences between these gelatins. The first head bone gelatin contained high content of imino residues and more high molecular weight proportions of β and γ components. Gel strengths of the second and third gelatins were 209 ± 7 g and 117 ± 5 g, lower than that of the first head bone gelatin (282 ± 11 g). Furthermore, the first head bone gelatin achieved the highest gelling and melting points. The first head bone gelatin showed strong ability of clarification when it was used to clarify apple juice. At the same time, the nutritional components of apple juice changed a little except Vitamin C.     

Characterization of tilapia (Oreochromis niloticus) skin gelatin extracted with alkaline and different acid pretreatments

Tilapia production is growing worldwide and to better utilize wastes from the processing industry, one important application is production of high quality fish gelatin to meet the needs of markets that are not amenable to beef or porcine gelatin. The extraction process from tilapia skin gelatin was optimized through the use of a combination of alkali (0.3 M NaOH) with different types and concentrations of acids before thermal hydrolysis. The effects of acid pretreatments on the protein yields and the physicochemical properties of tilapia gelatin were investigated. Acid concentrations (0.01–0.20 M) influenced gelatin protein recovery: 10.52%–22.40% for citric acid, 1.92%–21.55% for acetic acid, and 4.47%–24.35% for HCl. It was possible to increase gelatin yield for each of the tested acids by adjusting the acid concentration. Gelatin viscosity and the molecular weight distribution of gelatin proteins were related to the acid concentration used. Gelatin prepared using too low a concentration (e.g. 0.01 M acetic acid or HCl) or too high a concentration (e.g. >0.05 M HCl or citric acid) yielded an extract with a smaller ratio of large molecule components, such as β-chains, and exhibited lower viscosity. The film forming properties of gelatins extracted from three acid-optimized pretreatments showed no significant difference in transparency, tensile strength and elongation at break; though the gelatin film made from 0.03 M citric acid pretreated gelatin had somewhat better water barrier property than those made with HCl or acetic acid.     

Physical, mechanical, and barrier properties of carp and mammalian skin gelatin films

Films of 0.11 to 0.13 mm thickness were prepared using gelatins from the skins of cultured freshwater carp species and mammalian gelatins viz., porcine and bovine skin gelatin. A comparative study was made on the physical, mechanical, and barrier properties of these films. The amino acid composition, gel strength, clarity, and gel setting point of the gelatins were also determined. Carp skin gelatins had a lower imino acid content (19.16% to 20.86%) than mammalian skin gelatins (22.91% to 23.7%). Grass carp gelatin had gel strength of 230.2 B that is comparable to the reported value for bovine skin gelatin (227.2 B). The bloom values of rohu and common carp skin gelatins were 188.6 B and 181.3 B, respectively, which were significantly lower than mammalian gelatins. Mammalian gels have significantly higher (P < 0.05) setting temperatures (23.7 to 24.2 °C) than carp skin gelatins. Tensile strength (TS) was lowest for films from common carp and rohu skin gelatin (490 and 497 kg/cm(2), respectively) and highest for porcine skin gelatin film. The degree of transparency (L*) was significantly higher for films from grass carp, bovine hide, and pork skin gelatin films. Carp skin gelatin films had significantly lower water vapor permeability (WVP) and oxygen permeability (OP) than mammalian skin gelatin films, which indicated that carp skin gelatin based films have superior barrier properties than mammalian skin gelatin films.     

酸/碱预处理对美洲鳗鲡（Anguilla rostrata）鱼骨明胶理化性质与凝胶特性的影响

以美洲鳗鲡（Anguilla rostrata）鱼骨为原料,采用酸或碱预处理结合热水浸提制备鱼骨明胶,并通过得率、凝胶强度测定、SDS-PAGE、紫外全波长扫描、红外光谱扫描、动态流变学测定以及扫描电镜等研究鱼骨明胶的理化性质和凝胶特性。结果表明:酸法预处理明胶（AG60）与碱法预处理明胶（BG60）得率分别为13.6%和6.88%,凝胶强度分别为101.95 g和78.74 g。AG60和BG60的羟脯氨酸含量为3.2 g/100 g和2.7 g/100 g。两种明胶均含有β和α₁、α₂链,其中AG60的α₁+α₂含量显著高于BG60。AG60与BG60均具有明胶的特征吸收峰,且无杂蛋白吸收峰。与BG60相比,AG60具有更高的凝胶温度与熔融温度,以及更短的胶凝时间。扫描电镜分析显示,AG60具有更致密、均一的凝胶网络结构。本研究表明,与碱法预处理相比,酸法预处理制备得到的鳗鱼骨明胶具有更高的得率与更好的凝胶特性。     

Characteristics and functional properties of gelatin from splendid squid (Loligo formosana) skin as affected by extraction temperatures

Gelatin was extracted from the skin of splendid squid (Loligo formosana) at different temperatures (50, 60, 70 and 80 °C) with extraction yield of 8.8%, 21.8%, 28.2%, and 45.3% (dry weight basis) for G50, G60, G70 and G80, respectively. Gelatin from the skin of splendid squid had a high protein content (∼90%) with low moisture (8.63–11.09%), fat (0.22–0.31%) and ash contents (0.17–0.68%). Gelatin extracted at higher temperature (G80) had a relatively higher free amino group content than gelatin extracted at lower temperatures (G50, G60 and G70) (P < 0.05). All gelatins contained α- and β-chains as the predominant components. Amino acid analysis of gelatin revealed the high proline and hydroxyproline contents for G50 and G60. FTIR spectra of obtained gelatins revealed the significant loss of molecular order of the triple-helix. The gel strength of gelatin extracted at lower temperature (G50) was higher than that of gelatins extracted at higher temperatures including G60, G70 and G80, respectively. The net charge of G50, G60, G70 and G80 became zero at pHs of 6.84, 5.94, 5.49, and 4.86, respectively, as determined by zeta potential titration. Gelatin extracted at higher temperature (G80) had the lower L* value but higher a* and b* values, compared with those extracted at lower temperatures (P < 0.05). Emulsion activity index decreased, whilst emulsion stability index, foam expansion and stability increased as the concentration (1–3%) increased (P < 0.05). Those properties were governed by extraction temperatures of gelatin. Thus gelatin can be successfully extracted from splendid squid skin using the appropriate extraction temperature.     

Rheological properties of channel catfish (Ictalurus punctaus) gelatine from fish skins preserved by different methods

Gelatins were extracted from channel catfish skins preserved by different methods using 50 mmol/l acetic acid. Molecular weight distribution, gel strength and viscoelastic properties of gelatin samples were studied. Compared to gelatins from fresh and frozen skins, gelatin from dried channel catfish skin exhibited higher gel strength. This can be explained by the large α-chains content of gelatin from the dried skins. The gelling point and melting point of dried channel catfish skin gelatin solution were similar to those of fresh skin gelatin solution, but distinctly different from those of frozen skin gelatin. After maturation at low temperature, melting points of gelatins increased. But the melting point of frozen skin gelatin was still the highest among the three gelatin samples studied.     

Changes in functional properties of shark (Isurus oxyrinchus) cartilage gelatin produced by different drying methods

Fish gelatins extracted from shark ( Isurus oxyrinchus ) cartilage were dried by three different methods: freeze drying, hot-air drying and spray drying; and their functional properties were investigated. Freeze-dried gelatin was found to have the strongest gel strength, while gelatins made at high temperatures formed weaker gels. The 135-kPa gel strength of freeze-dried gelatin was relatively high. While foam formation ability of the freeze-dried gelatin was the highest, its foam stability was the lowest. In addition, spray-dried gelatin had the best emulsion capacities. Dynamic viscoelastic properties of shark cartilage gelatins prepared by these drying methods were closely correlated with their gel strength. Elasticity modulus ( G '; Pa) and loss modulus ( G "; Pa) of the freeze-dried gelatin had higher values than those prepared by hot-air drying and spray drying; viscoelastic properties of the freeze-dried gelatin were maintained longer than those of other drying methods.     

Extraction and Physicochemical Characterization of Greater Lizardfish (Saurida tumbil) Skin and Bone Gelatin

ABSTRACT:  Type A gelatins were extracted from skins and bones of lizardfish and analyzed to determine their functional and chemical properties. Lizardfish skin gelatin had ash content of 2.2 ± 0.3% while bone gelatin had ash content of 12.2 ± 0.2%. Gel strength was 159.1 ± 14 and 135 ± 7.9 g, respectively, for skin and bone gelatins compared to 224.3 ± 7.7 g for porcine gelatin. Gelatin from skin exhibited higher viscosity and lower setting time than bone. Skin gelatin had higher imino acid content than bone gelatin. The total imino acid content was 21.71% and 19.83% for skin and bone, respectively. Both skin and bone gelatins contained more α chains than β and γ components. Both bone and skin gelatins also contained low molecular weight (< α) peptides. The differences in functional properties between the skin and bone gelatins appeared to be related to differences in amino acid composition and molecular weight distribution of the gelatins.     

Physicochemical Properties of Mammalian Gelatin in Relation to Membrane Process Requirement

In any of the membrane process application, understanding of the characteristics of the feed solution is essential in order to achieve desired level of separation performance. In this study, in an effort to substitute evaporation with membrane processes partially, experiments were carried out to investigate the physicochemical properties of gelatins, namely, molecular weight distribution, pH, viscosity, isoelectric point, and gel strength, which are, of foremost, important parameters in the characterization of gelatin. Two different mammalian gelatins, i.e. from bovine (type B) and porcine (type A) sources, were used in this study. The pH was significantly varied for all gelatins in the vicinity of 4.75–5.51 (±0.01). Experimental result revealed that both sources of mammalian gelatin contained components of different molecular weights with wide distribution ranging from 10 to 400 kDa. Analysis of the molecular weight distribution result also showed strong correlation between average molecular weight and gel strength of gelatin. The isoelectric points of gelatins from bovine were 4.60 ± 0.08 to 5.25 ± 0.43 and porcine gelatins were in the range of 7–9.3, which agreed well with the results obtained from other researchers. The high bloom strength mammalian gelatins were also significantly more viscous and thus, had a higher melting point.     

Properties of Alaska Pollock Skin Gelatin: A Comparison with Tilapia and Pork Skin Gelatins

ABSTRACT:  The objective of this work was to compare the physiochemical and rheological properties of Alaska pollock skin gelatin (AG) to those obtained for tilapia and pork skin gelatins. Results were also obtained for some mixed gels containing AG and pork skin gelatin, or AG and tilapia gelatin. AG contained about 7% hydroxyproline (Hyp), which was lower than that of tilapia (∼11%) or pork skin gelatin (∼13%). Most of the protein fractions in AG were α chain, β chain, and other oligomers. The gel strength of AG was 98 gram-force at 10 °C, and increased at a greater rate than other gelatins with decreasing temperature. The gel melting point of AG was the lowest with the oil-drop method, while the viscosity of AG was the highest of the samples studied. The rheological properties of gelatins were determined using small amplitude oscillatory shear testing. G' was nearly independent of frequency for most of the gelatin gels, but AG gels showed a slight dependence on G' and a minimum in G". G' was found to be a power law function of concentration for all gelatins used: G'= k × Cⁿ. In rheological measurements, AG also showed the lowest gel melting temperature and sharpest melting region. Increasing gelatin concentration resulted in a higher melting temperature and a broader melting region for all gelatin gels. For both the AG-pork and AG-tilapia mixed gels, the gel melting temperatures decreased and melting regions narrowed as the AG fraction was increased.     

The characteristics of gelatin extracted from sturgeon (Acipenser baeri) skin using various pretreatments

The physicochemical characteristics of gelatin obtained by different pretreatments of sturgeon (Acipenser baeri) skin with alkaline and/or acidic solutions have been studied. Visual appearance, pH, gel strength, viscosity and amino acid profile of the gelatins were evaluated. Pretreatment with alkaline solutions of Ca(OH)₂ and/or acetic acid (HAC) provided gelatin with a favourable colour. Pretreatment with alkali removed noncollagenous proteins effectively, whilst acid induced some loss of collagenous proteins. Gel strength and viscosity of gelatin pretreated with HAC or alkali followed by HAC were as high as gelatin extracted in the presence of protease inhibitors. Amino acid composition had no significant effect on the gelatin characteristics. The total acid concentration for the highest gel strength was inversely proportional to ionisation strength, and the preferred pH for extracting gelatin with the optimum gel strength was approximately 5.0. The results showed that any available protons, regardless of the type or concentration of the acid, inhibit protease activity, which significantly affects the gelatin characteristics.     

Characteristics and chemical composition of skins gelatin from cobia (Rachycentron canadum)

Gelatin was obtained from cobia (Rachycentron canadum) skins, which is an important commercial species for marine fish aquaculture, and it was compared with gelatin from croaker (Micropogonias furnieri) skins, using the same extraction methodology (alkaline/acid pre-treatments). Cobia skins gelatin showed values of protein yield, gelatin yield, gel strength, melting point, gelling point and viscosity higher than the values found from croaker skins gelatin. The values of turbidity and Hue angle for cobia and croaker gelatins were 403 and 74 NTU, and 84.8° and 87.3°, respectively. Spectra in the infrared region had the major absorption band in the amide region for both gelatins, but it showed some differences in the spectra. The proline and hydroxyproline contents from cobia skins gelatin (205 residues/1000 residues) was higher than from croaker skins gelatin (188 residues/1000 residues). SDS-PAGE of both gelatins showed a similar molecular weight distribution to that of standard collagen type I. Therefore, cobia skins could be used as a potential marine source of gelatin obtainment for application in diversified industrial fields.     

Characteristics and functional properties of gelatin from seabass skin as influenced by defatting

Gelatins from nondefatted and defatted seabass skins were characterised and evaluated for their functional properties in comparison with commercial fish skin gelatin. All gelatins contained α₁‐ and α₂‐chains as the predominant components and showed a high imino acid content (199–201 residues/1000 residues). All gelatins had a relative solubility greater than 90% in the wide pH ranges (1–10). Foaming properties of all gelatins increased with increasing concentrations (1–3%, w/v). Gelatin from defatted skin had higher foam expansion and stability than that extracted from nondefatted skin. Emulsion containing gelatin from defatted skin had smaller oil droplet size (d₃₂, d₄₃), compared with that having gelatin from nondefatted skin (P < 0.05). After 10 days of storage at room temperature (28–30 °C), emulsion stabilised by gelatin from defatted skin showed the higher stability as indicated by the lower increases in d₃₂ and d₄₃, and lower flocculation factor and coalescence index. Coincidentally, emulsion stabilised by gelatin from defatted skin had higher zeta potential than that containing gelatin from nondefatted skin. Thus, defatting of seabass skin directly affected characteristics and functional properties of resulting gelatin.     

Effects of alkaline and acid pretreatment on the physical properties and nanostructures of the gelatin from channel catfish skins

The objective of this study was to illustrate the correlation between the physical properties and nanostructure of gelatins made of channel catfish (Ictalurus punctatus) skins. The gelatin samples were first pretreated with sodium hydroxide, acetic acid, or water, and then extracted with hot water before the measurement. Physical properties including the yield of protein, viscosity and textural properties were determined on gelatins obtained with different pretreatment conditions. The acid pretreatment group showed the highest gel strength and protein yield, and a reasonable viscosity. The water pretreatment group showed the lowest values for all of the physical properties. Four samples including water, 0.1 M acid and 0.25 and 1.0 M alkaline-pretreated groups’ nanostructures were then studied using atomic force microscopy (AFM). The AFM images showed that the acid-pretreated gelatin was composed of sponge-like aggregates, while the others showed separated individual aggregates. Annular pores were only found in the alkaline pretreatment group. There was no significant correlation between the diameters of the spherical aggregates and the physical properties; however, the different AFM patterns may relate to the gelatin's physical properties.     

Water Vapor Permeability of Mammalian and Fish Gelatin Films

ABSTRACT:  Water vapor permeability of cold- and warm-water fish skin gelatins films was evaluated and compared with different types of mammalian gelatins. Alaskan pollock and salmon gelatins were extracted from frozen skins, others were obtained from commercial sources. Water vapor permeability of gelatin films was determined considering differences on percent relative humidity (%RH) at the film underside. Molecular weight distribution, amino acid composition, gel strength, viscoelastic properties, pH, and clarity were also determined for each gelatin. Water vapor permeability of cold-water fish gelatin films (0.93 gmm/m²hkPa) was significantly lower than warm-water fish and mammalian gelatin films (1.31 and 1.88 gmm/m²hkPa, respectively) at 25 °C, 0/80 %RH through 0.05-mm thickness films. This was related to increased hydrophobicity due to reduced amounts of proline and hydroxyproline in cold-water fish gelatins. As expected, gel strength and gel setting temperatures were lower for cold-water fish gelatin than either warm-water fish gelatins or mammalian gelatins. This study demonstrated significant differences in physical, chemical, and rheological properties between mammalian and fish gelatins. Lower water vapor permeability of fish gelatin films can be useful particularly for applications related to reducing water loss from encapsulated drugs and refrigerated or frozen food systems.     

Skin gelatin from bigeye snapper and brownstripe red snapper: Chemical compositions and effect of microbial transglutaminase on gel properties

Fish skin gelatin was extracted from the skin of bigeye snapper (Priacanthus macracanthus) and brownstripe red snapper (Lutjanus vitta) with yields of 6.5% and 9.4% on the basis of wet weight, respectively. Both skin gelatins having high protein but low fat content contained high hydroxyproline content (75.0 and 71.5 mg/g gelatin powder). The bloom strength of gelatin gel from brownstripe red snapper skin gelatin (218.6 g) was greater than that of bigeye snapper skin gelatin (105.7 g) (P<0.05). The addition of microbial transglutaminase (MTGase) at concentrations up to 0.005% and 0.01% (w/v) increased the bloom strength of gelatin gel from bigeye snapper and brownstripe red snapper, respectively (P<0.05). However, the bloom strength of skin gelatin gel from both fish species decreased with further increase in MTGase concentration. SDS-PAGE of gelatin gel added with MTGase showed the decrease in band intensity of protein components, especially, β- and γ- components, suggesting the cross-linking of these components induced by MTGase. Microstructure studies revealed that denser and finer structure was observed with the addition of MTGase.     

Effects of Pretreatment on Properties of Gelatin from Perch (Lates Niloticus) Skin

Fish gelatins obtained from perch fish skin pretreated with various solutions containing acetic acid, sodium hydroxide (NaOH) and sodium chloride (NaCl) were successfully characterized for their nanostructure pattern using field emission scanning electron microscopy. Each pretreatment transformed collagen to gelatin with fibril, zigzag cracks, straight rods, and cross-linked rods nanostructure patterns. Pretreatment solutions also affect the gel yield, gel strength, amino acid profile, and functional groups in perch gelatin as analyzed by Fourier transform infrared spectroscopy. Samples pretreated with NaCl, NaOH, and acetic acid solution showed the highest gel yield (22.84%) and gel strength (179.84 g). Fourier transform infrared spectra for perch gelatins also revealed weak C–N amide II and III bond stretches as well as weak C=O bond stretch.