Short poly(phenylene vinylene) chains grafted poly(organophosphazene)

Brominated poly(bis(4-methylphenoxyphosphazene) was allowed to react with 1,4-bischloromethylbenzene or 1,4-bischloromethyl-2,5-dimethoxybenzene in solution using phase transfer catalyst or potassium t-butoxide. Poly(p-phenylene vinylene) or poly(2,5-methoxy-1,4-phenylene vinylene) grafted organophosphazene copolymers were obtained. The UV-Vis absorption, photoluminescent, and thermal properties of the copolymers were measured. The copolymers are complete soluble in common organic solvents and fluoresce in the blue color range. The copolymers were used to build a series of organic light emitting diode (OLED). Only weak to nominated intensities with emission color from blue to red were obtained. The photoluminescent and electroluminescent (EL) spectra indicated there is a distribution in the PPV conjugated length. The compositions of the copolymers before and after the graft reaction were analyzed using NMR.     

Novel porphyrin‐grafted poly(phenylene vinylene) derivatives: Synthesis and photovoltaic properties

A series of novel porphyrin‐grafted poly (phenylene vinylene) derivatives, Porp‐RO‐PPV, were synthesized by a simple two‐step method. These copolymers contain conjugated poly(phenylene vinylene) derivatives as polymer backbone and covalently linked porphyrin units as side chain, which were confirmed by FTIR and ¹H NMR, and used for photovoltaic devices. The thermal, optical properties and sensitizing effect, and photovoltaic properties have been investigated. The emission spectra of Porp‐RO‐PPV copolymers revealed the existence of strong energy transfer from PPV backbone to porphyrin units. The energy conversion efficiency (η_e) of photovoltaic devices based on Porp‐RO‐PPV+PCBM reached 0.33% (78.2 mW/cm², AM1.5) and porphyrin units in the copolymers showed good sensitizing effect at low concentration. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Photooxidative stability of substituted poly(phenylene vinylene) (PPV) and poly(phenylene acetylene) (PPA)

The addition of side groups to improve the photooxidative stability of polymers used in polymer-based light-emitting diodes (LEDs) is explored. Infrared spectroscopy and computational chemistry techniques are used to study the effects of chemical substitution of the reactive vinylene moiety in poly(phenylene vinylene) (PPV). The bond order of the vinylene group in small oligomers is calculated using semiempirical techniques to assess the improvement in stability toward oxidants such as singlet oxygen. We find that PPV dimers allow relative comparisons across a range of possible substitutions. Experimental results correlate well with these calculations. The addition of electron-withdrawing substituents, such as nitrile groups, to the vinylene moiety is found to be particularly effective in reducing the reactivity of alkoxy-substituted PPV toward singlet oxygen. The photooxidative stability of a poly(phenylene acetylene) (PPA) derivative is also studied. It appears that this family of polymers is more stable toward photooxidation than are its PPV analogs. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 2451–2458, 1998     

Synthesis and characterizations of poly(4‐alkylthiazole vinylene)

Two poly(thiazole vinylene) derivatives, poly(4‐hexylthiazole vinylene) (P4HTzV) and poly(4‐nonylthiazole vinylene) (P4NTzV), were synthesized by Pd‐catalyzed Stille coupling method. The polymers are soluble in common organic solvents such as o‐dichlorobenzene and chloroform, and possess good thermal stability. P4HTzV and P4NTzV films exhibit broad absorption bands at 400–720 nm with an optical bandgap of 1.77 eV and 1.74 eV, respectively. The HOMO (the highest occupied molecular orbital) energy levels of P4HTzV and P4NTzV are ?5.11 and ?5.12 eV, respectively, measured by cyclic voltammetry. Preliminary results of the polymer solar cells based on P4HTzV : PC₆₁BM ([6,6]‐phenyl‐C‐61‐butyric acid methyl ester) (1 : 1, w/w) show a power conversion efficiency of 0.21% with an open‐circuit voltage of 0.55 V and a short circuit current density of 1.11 mA cm^?2, under the illumination of AM1.5G, 100 mW cm^?2. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of polyrotaxanes comprising α‐cyclodextrins and poly(ε‐caprolactone) end‐capped with poly(butyl methacrylate)s

Biodegradable polyrotaxane‐based triblock copolymers were synthesized via the bulk atom transfer radical polymerization (ATRP) of n‐butyl methacrylate (BMA) initiated with polypseudo‐rotaxanes (PPRs) built from a distal 2‐bromoisobutyryl end‐capped poly(ε‐caprolactone) (Br‐PCL‐Br) with α‐cyclodextrins (α‐CDs) in the presence of Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine at 45 ºC. The structure was characterized in detail by means of ¹H NMR, gel permeation chromatography, wide‐angle X‐ray diffraction, DSC and TGA. When the feed molar ratio of BMA to Br‐PCL‐Br was changed from 128 to 300, the degree of polymerization of PBMA blocks attached to two ends of the PPRs was in the range 382 ? 803. Although about a tenth of the added α‐CDs were still threaded onto the PCL chain after the ATRP process, the movable α‐CDs made a marked contribution to the mechanical strength enhancement, blood anticoagulation activity and protein adsorption repellency of the resulting copolymers. Meanwhile, they could also protect the copolymers from the attack of H₂O and Lipase AK Amano molecules, exhibiting a lower mass loss as evidenced in hydrolytic and enzymatic degradation experiments. © 2013 Society of Chemical Industry     

Thin films of insoluble copolymer derived from poly(phenylene‐vinylene) obtained by thermal evaporation under vacuum

A new copolymer, referred to as poly(phenylene‐vinylene) (PPV)‐ether, built as PPV a polymer with some (? CH?CH? ) links changed into (? CH₂? O? CH₂? ) ethylic‐ether links, is insoluble in common solvents. PPV‐ether films are deposited by the thermal evaporation technique. X‐ray photoelectron spectroscopy for chemical analysis measurements indicate that the surface contamination decrease in the case of vacuum‐evaporated PPV‐ether. The scanning electron micrographs indicate that the surface of these vacuum‐deposited PPV‐ether are uniform. By comparison to the reference powder, the modification of the properties of the evaporated PPV‐ether are related to the decrease of the chain length and surface contamination. The results of the photoluminescence measurements reveal a shifting of the luminescence to blue in the vacuum‐evaporated PPV‐ether. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3091–3099, 2003     

Synthesis,characterization, and photophysical properties of novel poly(p‐phenylene vinylene) derivatives with conjugated thiophene as side chains

Two novel poly(p‐phenylene vinylene) (PPV) derivatives with conjugated thiophene side chains, P1 and P2, were synthesized by Wittig‐Horner reaction. The resulting polymers were characterized by ¹H‐NMR, FTIR, GPC, DSC, TGA, UV–Vis absorption spectroscopy and cyclic voltammetry (CV). The polymers exhibited good thermal stability and film‐forming ability. The absorption spectra of P1 and P2 showed broader absorption band from 300 to 580 nm compared with poly[(p‐phenylene vinylene)‐alt‐(2‐methoxy‐5‐octyloxy‐p‐phenylene vinylene)] (P3) without conjugated thiophene side chains. Cyclic voltammograms displayed that the bandgap was reduced effectively by attaching conjugated thiophene side chains. This kind of polymer appears to be interesting candidates for solar‐cell applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Competitive binding of divalent cations to poly(α-hydroxyacrylic acid)

The competitive binding of divalent cations (Mg²⁺, Ca²⁺, Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺) on poly(α-hydroxyacrylic acid) (PHA) and poly(acrylic acid) (PAA) was investigated by equilibrium dialysis. In the Mg/Ca mixed system, binding selectivity for Ca²⁺ over Mg²⁺ was significantly higher in PHA than in PAA; this was attributed to coordination of α-OH groups on PHA to Ca²⁺. The binding ability and selectivity for the transition metal cations were almost the same for PHA and PAA at neutral pH, while PHA maintained appreciably higher degrees of binding than PAA in acidic solutions (pH about 3). This cation binding ability of PHA was ascribed to the lower pK_a value in the relevant pH region. © 1998 SCI.     

Mechanism analysis of the PEG-participated Gilch synthesis for soluble poly(p-phenylene vinylene) derivatives

By introducing poly(ethylene glycol) (PEG) into the Gilch reaction system for the synthesis of soluble poly(p-phenylene vinylene)s (PPVs), significant changes were observed. First, with the involvement of PEG, the polymerization degree increases significantly and the molecular weight distribution becomes wider. The multimodial characteristic of the GPC curves at low conversions is quite evident. Second, at low PEG content, gelation dramatically disappears; with an increase of PEG, gelation reappears. From the above experimental results, the existence of various types of polymerization-active species and the anionic polymerization mechanism are confirmed, which are due to the dissociation of the carbanion–cation pairs by the complexing effect of PEG. At the same time, the enhanced dissociation of the base (t-BuO⁻K⁺) ion pairs by PEG may be responsible for the dramatic disappearance of gelation. Free t-BuO⁻ anions have strengthened the basicity and accelerated the conjugation-formation process which competes with the interchain by-reactions. Gelation is therefore avoided. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 263–268, 2001     

Synthesis and characterization of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) triblock copolymers with dibutylmagnesium as catalyst

Two series of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) triblock copolymers were prepared by the ring opening polymerization of ε‐caprolactone in the presence of poly(ethylene glycol) and dibutylmagnesium in 1,4‐dioxane solution at 70°C. The triblock structure and molecular weight of the copolymers were analyzed and confirmed by ¹H NMR, ¹³C NMR, FTIR, and gel permeation chromatography. The crystallization and thermal properties of the copolymers were investigated by wide‐angle X‐ray diffraction (WAXD) and differential scanning calorimetry (DSC). The results illustrated that the crystallization and melting behaviors of the copolymers were depended on the copolymer composition and the relative length of each block in copolymers. Crystallization exothermal peaks (T_c) and melting endothermic peaks (T_m) of PEG block were significantly influenced by the relative length of PCL blocks, due to the hindrance of the lateral PCL blocks. With increasing of the length of PCL blocks, the diffraction and the melting peak of PEG block disappeared gradually in the WAXD patterns and DSC curves, respectively. In contrast, the crystallization of PCL blocks was not suppressed by the middle PEG block. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

High field conduction in poly(p-phenylene vinylene)

We have shown that in polyacetylene, for electric fields above 10⁶ V/cm polarons are dissociated because the electron or hole can move much faster than the lattice distortion. Similar results should hold for poly(p-phenylene vinylene), PPV. To determine whether the free carriers thus created can be heated by the field sufficiently to allow impact ionization, we investigated free-carrier scattering in PPV. The important scatterers are longitudinal acoustic modes, molecular vibrations, and librational torsional modes. The coupling constants and important frequencies are known approximately for the first two of these processes in PPV. Using these values, some reasonable values for librons, and the calculated band structure of PPV, we conclude that at least some of the carriers could be heated to 2 eV at a field of ∼10⁶ V/cm, and that they could acquire energy required for impact ionization at not much higher fields.     

Micropatterning of poly(p‐phenylene vinylene) by femtosecond laser induced forward transfer

Conjugated polymers are important materials for optical applications, among which poly(p‐phenylene vinylene) (PPV) has a major role due to its applicability in sensors, organic light‐emitting diodes and large area displays. Despite advances on the synthesis of PPV‐based polymers and the improvements of their properties, its printing process, in particular involving the solid phase, remains unsuitable for the development of electro‐optical microcircuits. This paper demonstrates the printing of PPV from the solid phase in 2D micropatterns. Such an achievement was performed using laser induced forward transfer with femtosecond pulses, which allows area‐selective deposition within reduced scales as thin as ca 100 nm and 5 µm wide. Raman, fluorescence and electrochemical impedance spectroscopies confirm that the printed PPV micropatterns have the same structure, emission spectrum and conductivity as the target material, revealing the conservation of their original properties even after laser irradiation. The printing process was carried out using PPV films, overcoming the insolubility issue of this material. The optical and electrical characterization of the transferred PPV demonstrates the potential of this method for the patterning of electro‐optical microdevices, since luminescence and electrical conductivity were preserved. © 2018 Society of Chemical Industry     

Hydrolytic degradation of poly(oxyethylene)–poly-(ε-caprolactone) multiblock copolymers

The degradation of poly(oxyethylene)–poly(ε-caprolactone) (POE–PCL) multiblock copolymers was investigated at 37°C in a 0.13M, pH 7.4 phosphate buffer selected to mimic in vivo conditions. The copolymers were obtained by coupling polycaprolactone diols and poly(ethylene glycol) diacids using dicyclohexylcarbodiimide as coupling agent. Various techniques, such as weighing, size exclusion chromatography, infrared, ¹H nuclear magnetic resonance, differential scanning calorimetry, and X-ray diffractometry, were used to monitor changes in total mass, water absorption, molar mass, thermal properties, degree of crystallinity, and composition. The results showed that introduction of POE sequences considerably increased the hydrophilicity of the copolymers as compared with PCL homopolymers. Nevertheless, the degradability of PCL sequences was not enhanced due to the phase separation between the two components. Significant morphological changes were also observed during the degradation. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 989–998, 1998     

Synthesis and electroluminescence properties of a novel poly(paraphenylene vinylene)‐based copolymer with tri(ethylene oxide) segments on the backbone

A novel light‐emitting copolymer [tri(ethylene oxide)–poly(paraphenylene vinylene) (TEO–PPV)] containing alternating rigid, conjugated distyrylbenzene [poly(paraphenylene vinylene) model oligomer] as light‐emitting units and flexible tri(ethylene oxide) as ionic conductive units was synthesized. The polymer was characterized with Fourier transform infrared, ¹H‐NMR, ultraviolet–visible spectroscopy, differential scanning calorimetry, and gel permeation chromatography. TEO–PPV has excellent solubility in conventional organic solvents such as tetrahydrofuran, chloroform, benzene, and toluene. The estimated lowest unoccupied molecular orbital, highest occupied molecular orbital, and band gap are 2.35, 5.29, and 2.94 eV, respectively. Single‐layer and double‐layer light‐emitting diodes with indium tin oxide anodes and calcium cathodes were fabricated, and the photoluminescence (PL) and electroluminescence (EL) properties were investigated. The maximum EL emissive peak (475 nm) of the devices is essentially the same as that of PL. Anomalous current–voltage characteristics were observed in both devices. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2195–2200, 2002     

Cationic copolymers of α,β‐poly‐(N‐2‐hydroxyethyl)‐DL‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy): synthesis and characterization

In the present study the derivatization of two water‐soluble synthetic polymers, α,β‐poly(N‐2‐hydroxyethyl)‐DL ‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy), with glycidyltrimethylammonium chloride (GTA) is described. This reaction permits the introduction of positive charges in the macromolecular chains of PHEA and PAHy in order to make easier the electrostatic interaction with DNA. Different parameters affect the reaction of derivatization, such as GTA concentration and reaction time. PHEA reacts partially and slowly with GTA; on the contrary the reaction of PAHy with GTA is more rapid and extensive. The derivatization of PHEA and PAHy with GTA is a convenient method to introduce positive groups in their chains and it permits the preparation of interpolyelectrolyte complexes with DNA. © 2000 Society of Chemical Industry     

Polyimide–polysiloxane block copolymers synthesized from α, ω-(3-aminophenoxy) terminated poly[oxy(dimethylsilyl)-1,4-phenylene(dimethylsilylene)]s

A method has been worked out for the synthesis of α,ω-(3-aminophenoxy) terminated poly[oxy(dimethylsilyl)-1,4-phenylene(dimethylsilylene)]oligomers with controlled molecular weight. From these oligomers were synthesized polyimide-polysiloxane block copolymers via a transimidization route, with polyimide moieties based on 2-aminopyridine terminated 5,5′-oxybis-1,3-isobenzofuranedione-4,4′-[1,4-phenylenebis(1-methylethylidene)]bisaniline oligomers. The copolymers obtained show higher thermooxidative stability in comparison with copolymers having siloxane moiety based on α,ω-aminopropyl or α,ω-arylamine terminated poly(dimethylsiloxane) oligomers.     

Electroluminescence and photovoltaic properties of poly(p‐phenylene vinylene) derivatives with dendritic pendants

A copolymer of dendronized poly(p‐phenylene vinylene) (PPV), poly{2‐[3′,5′‐bis (2′‐ethylhexyloxy) bnenzyloxy]‐1,4‐phenylene vinylene}‐co‐poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylene vinylene] (BE‐co‐MEH–PPV), was synthesized with the Gilch route to improve the electroluminescence and photovoltaic properties of the dendronized PPV homopolymer. The polymer was characterized by ultraviolet–visible absorption spectroscopy, photoluminescence spectroscopy, and electrochemical cyclic voltammetry and compared with the homopolymers poly{2‐[3′, 5′‐bis(2‐ethylhexyloxy) benzyloxy‐1,4‐phenylene vinylene} (BE–PPV) and poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylenevinylene] (MEH–PPV). Polymer light‐emitting diodes based on the polymers with the configuration of indium tin oxide (ITO)/poly(3,4‐ethylene dioxythiophene) : poly(styrene sulfonate) (PEDOT : PSS)/polymer/Ca/Al were fabricated. The electroluminescence efficiency of BE‐co‐MEH–PPV reached 1.64 cd/A, which was much higher than that of BE–PPV (0.68 cd/A) and a little higher than that of MEH–PPV (1.59 cd/A). Photovoltaic properties of the polymer were studied with the device configuration of ITO/PEDOT : PSS/polymer : [6,6J‐phenyl‐C₆₁‐butyric acid methyl ester] (PCBM)/Mg/Al. The power conversion efficiency of the device based on the blend of BE‐co‐MEH–PPV and PCBM with a weight ratio of 1 : 3 reached 1.41% under the illumination of air mass 1.5 (AM1.5) (80 mW/cm²), and this was an improvement in comparison with 0.24% for BE–PPV and 1.32% for MEH–PPV under the same experimental conditions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Hybrid transdermal drug delivery patch made from poly(p‐phenylene vinylene)/natural rubber latex and controlled by an electric field

A flexible, natural rubber (NR) patch was developed for electrically controllable transdermal drug delivery. NR latex was crosslinked at various crosslinking ratios under the UV curing method. Ibuprofen (Ibu) was the model drug and was used as the dopant for poly(p‐phenylene vinylene) (PPV) acting as the drug encapsulating host. For the pristine Ibu‐loaded NR patch, the amount of Ibu permeation increased with decreasing crosslink density and increasing electrical potential. For the Ibu‐doped PPV/NR patch, the amount of Ibu release?permeation also increased with increasing electrical potential and was higher than that of the pristine NR matrices. Without an applied electric field, the drug remained attached to the PPV during an initial period of 6 h. Under an applied electric field, the oxidation state of the conductive polymer was altered, the iontophoretic effect, pore formation in the NR matrix, expansion of the pore size in hair follicles and PPV chain expansion combined to increase the Ibu release?permeation amount. Thus, the flexible PPV/NR transdermal drug delivery patch was demonstrated to be effective in drug release?permeation based on the strength of the electrical potential, the crosslinking density and the presence of PPV as the encapsulation host. © 2018 Society of Chemical Industry     

Thermal decomposition behavior of γ‐irradiated poly(vinyl acetate)/poly(methyl methacrylate) miscible blends

Miscible polymer blends based on various ratios of poly(vinyl acetate) (PVAc) and poly(methyl methacrylate) (PMMA) were prepared in film form by the solution casting technique using benzene as a common solvent. The thermal decomposition behavior of these blends and their individual homopolymers before and after γ‐irradiation at various doses (50–250 kGy) was investigated. The thermogravimetric analysis technique was utilized to determine the temperatures at which the maximum value of the rate of reaction (T_max) occurs and the kinetic parameters of the thermal decomposition. The rate of reaction curves of the individual homopolymers or their blends before or after γ‐ irradiation displayed similar trends in which the T_max corresponding to all polymers was found to exist in the same position but with different values. These findings and the visual observations of the blend solutions and the transparency of the films gave support to the complete miscibility of these blends. Three transitions were observed along the reaction rate versus temperature curves; the first was around 100–200°C with no defined T_max, which may arise from the evaporation of the solvent. The second T_max was in the 340–380°C range, which depended on the polymer blend and the γ‐irradiation condition. A third transition was seen in the rate of reaction curves only for pure PVAc and its blends with PMMA with ratios up to 50%, regardless of γ‐ irradiation. We concluded that γ‐irradiation improved the thermal stability of PVAc/PMMA blends, even though the PMMA polymer was degradable by γ irradiation. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1773–1780, 2006     

New light‐emitting poly{(9,9‐di‐n‐octylfluorenediyl vinylene)‐alt‐[1,5‐(2,6‐dioctyloxy)naphthalene vinylene]}

A new conjugated light‐emitting AB copolymer containing alternating fluorene and naphthalene units, poly{(9,9‐di‐n‐octylfluorenediyl vinylene)‐alt‐[1,5‐(2,6‐dioctyloxy)naphthalene vinylene]} (PFV‐alt‐PNV), was synthesized via Horner‐Emmons polymerization. The polymer is completely soluble in common organic solvents and exhibits good thermal stability up to 400 °C. UV‐visible, fluorescence and photoluminescence measurements of the copolymer show peak maxima at 427, 500 and 526 nm, respectively. A light‐emitting device containing the new polymer was fabricated using a simple indium tin oxide configuration: (ITO)/PEDOT:PSS/PFV‐alt‐PNV/Al. Measurements of current versus electric field were carried out, with an onset of light emission occurring at 2.5 V. The electroluminescence brightness was observed to reach a maximum of 5000 cd m^?2. Copyright © 2011 Society of Chemical Industry