In vitro behavior of marine lipid-based liposomes. Influence of pH, temperature, bile salts, and phospholipase A2

To deliver polyunsaturated fatty acids (PUFA) by the oral route, liposomes based on a natural mixture of marine lipids were prepared by filtration and characterized in media that mimic gastrointestinal fluids. First the influence of large pH variations from 1.5–2.5 (stomach) to 7.4 (intestine) at the physiological temperature (37°C) was investigated. Acidification of liposome suspensions induced instantaneous vesicle aggregation, which was partially reversible when the external medium was further neutralized. Simultaneously, complex morphological bilayer rearrangements occurred, leading to the formation of small aggregates. These pH- and temperature-dependent structural changes were interpreted in terms of osmotic shock and lipid chemical alterations, i.e., oxidation and hydrolysis, especially in the first hours of storage. Besides, oxidative stability was closely related to the state of liposome aggregation and the supramolecular organization (vesicles or mixed micelles). The effects of bile salts and phospholipase A₂ (PLA₂) on the liposome structures were also studied. Membrane solubilization by bile salts was favored by preliminary liposome incubation in acid conditions. PLA₂ showed a better activity on liposome structures than on the corresponding mixed lipid-bile salt micelles. As a whole, in spite of slight morphological modifications, vesicle structures were preserved after an acid stress and no lipid oxidation products were detected during the first 5 h of incubation. Thus, marine lipids constituted an attractive material for the development of liposomes as potential oral PUFA supplements.     

Marine lipid-based liposomes increase <Emphasis Type="Italic">in vivo</Emphasis> FA bioavailability

Liposomes made from an extract of natural marine lipids and containing a high n-3 PUFA lipid ratio were envisaged as oral route vectors for FA supplements in order to increase PUFA bioavailability. The absorption of FA in thoracic lymph duct-cannulated rats, after intragastric feeding of dietary fats in the form of liposomes or fish oil, was compared. Lipid and FA analyses were also performed on feces. Five mole percent α-tocopherol was added to fish oil and incorporated into the liposome membrane. The influence of α-tocopherol on FA lymph recovery was also investigated. In vivo, FA absorption in rats was favored by liposomes (98±1%) compared to fish oil (73±6%). In the same way, the DHA proportion in lymph was higher after liposome ingestion (78%) than after fish oil ingestion (47%). However, phospholipid (PL) concentration in lymph was not affected by the kind of dietary fat ingested, suggesting a PL regulation due to de novo TAG synthesis. The influence of the intramolecular distribution of n-3 PUFA in dietary lipids (TAG and PL) on the intramolecular FA distribution in TAG of chylomicrons was also investigated. The results obtained showed that the distribution of n-3 PUFA esterified on the sn-2 of chylomicron TAG depended on the lipid source administered. All these results correlated, at least partly, with in vitro liposome behavior under conditions that mimic those of the gastrointestinal tract. As a whole, this study pointed out that marine PL may constitute an attractive material for the development of liposomes as oral PUFA supplements.     

Interactions of KLA Amphipathic Model Peptides with Lipid Monolayers

Interactions of the cationic amphipathic peptide KLALKLALKALKAALKLA‐NH₂ (KLAL) and its double D ‐amino acid replacement analogues l¹¹k¹²‐KLAL and k⁹a¹⁰‐KLAL with lipid monolayers of anionic POPG, zwitterionic POPC and mixtures thereof at the air/water interface were investigated by infrared reflection– absorption spectroscopy (IRRAS). At high surface pressure (>30 mN m^?1) all peptides incorporated into lipid monolayers containing at least 25 % anionic POPG, and adopted an α‐helical conformation. Creation of free surface by expansion of the monolayers resulted in an additional adsorption of peptides from the subphase, but now in a β‐sheet conformation; this led to the coexistence of peptides in two distinctly different conformations within the lipid monolayer. The β‐sheets bound to the free surface could be squeezed out of the film by compressing the film to low surface areas, whereas the α‐helices remained bound to the lipids until the film collapsed. When bound to the lipid monolayer, the helical axis of the peptides is oriented almost parallel to the surface of the monolayer.     

Inhibition of lipid peroxidation and nonlipid oxidative damage by carnosine

The antioxidant effects of carnosine on lipids and nonlipids, including liposomes, carbohydrates, and proteins, were investigated. Carnosine exhibited a remarkable antioxidant effect in liposome and deoxyribose model systems. Carnosine at high amounts (50 mg/mL) was effective in protecting protein against oxidation. The correlation coefficients between reducing ability and the inhibition of liposome, albumin, and deoxyribose oxidation were r=0.92, 0.83, and 0.41, respectively. Carnosine exhibited metal-binding ability and scavenging ability for hydroxyl radicals generated by photolysis of H₂O₂ with UV light. The correlation coefficients between hydroxyl radical scavenging and the inhibitory effect on deoxyribose, liposome, and albumin oxidative damage were r=0.97, 0.60, and 0.29, respectively. These properties may explain how carnosine protects lipids and non-lipids against oxidative damage.     

Insights into the Action Mechanism of the Antimicrobial Peptide Lasioglossin III

Lasioglossin III (LL-III) is a cationic antimicrobial peptide derived from the venom of the eusocial bee Lasioglossum laticeps. LL-III is extremely toxic to both Gram-positive and Gram-negative bacteria, and it exhibits antifungal as well as antitumor activity. Moreover, it shows low hemolytic activity, and it has almost no toxic effects on eukaryotic cells. However, the molecular basis of the LL-III mechanism of action is still unclear. In this study, we characterized by means of calorimetric (DSC) and spectroscopic (CD, fluorescence) techniques its interaction with liposomes composed of a mixture of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-rac-phosphoglycerol (POPG) lipids as a model of the negatively charged membrane of pathogens. For comparison, the interaction of LL-III with the uncharged POPC liposomes was also studied. Our data showed that LL-III preferentially interacted with anionic lipids in the POPC/POPG liposomes and induces the formation of lipid domains. Furthermore, the leakage experiments showed that the peptide could permeabilize the membrane. Interestingly, our DSC results showed that the peptide-membrane interaction occurs in a non-disruptive manner, indicating an intracellular targeting mode of action for this peptide. Consistent with this hypothesis, our gel-retardation assay experiments showed that LL-III could interact with plasmid DNA, suggesting a possible intracellular target.     

Novel Cholesterol-Based Cationic Lipids as Transfecting Agents of DNA for Efficient Gene Delivery

The design, synthesis and biological evaluation of the cationic lipid gene delivery vectors based on cholesterol and natural amino acids lysine or histidine are described. Cationic liposomes composed of the newly synthesized cationic lipids 1a or 1b and neutral lipid DOPE (1,2-dioleoyl-l-α-glycero-3-phosphatidyl-ethanolamine) exhibited good transfection efficiency. pEGFP-N₁ plasmid DNA was transferred into 293T cells by cationic liposomes formed from cationic lipids 1a and 1b, and the transfection activity of the cationic lipids was superior (1a) or parallel (1b) to that of the commercially available 3β-[N-(N'',N''-dimethylaminoethyl)-carbamoyl] cholesterol (DC-Chol) derived from the same cholesterol backbone with different head groups. Combined with the results of agarose gel electrophoresis, transfection experiments with various molar ratios of the cationic lipids and DOPE and N/P (+/−) molar charge ratios, a more effective formulation was formed, which could lead to relatively high transfection efficiency. Cationic lipid 1a represents a potential agent for the liposome used in gene delivery due to low cytotoxicity and impressive gene transfection activity.     

Phospholipid liposomes: Preparation,characterization, and uses

Rhodopsin and cyclic guanosine monophosphat (cGMP)-dependent channel proteins are isolated from the rod outer segment disk membranes of dark-adopted bovine retinae and incorporated in liposomes, prepared by the method of detergent removal dialysis. The ion channel does not lose its transport function (release of Ca²⁺ ions by injection of cGMP) when incorporated in a liposome. Its activity depends on the degree of protein solubilization and the kind of detergent used. The highest activity is obtained by use of the detergent CHAPS. Shape, size, and size distribution of the liposomes are deduced from elastic and quasi-elastic light scattering, the liposome number density by viscometry, and the photopigment or Ca²⁺ content by optical absorbance. The liposomes are heterogeneous with respect to size and shape. Small unilamellar liposomes (R_h = 80 nm) and a narrow size distribution (U_D = 0.16) are obtained by using the detergent CHAPS. With increasing rhodopsin content per liposome, the hydrodynamic radius R_h increases and at the same time the shape of a liposome converts from a sphere to a prolate ellipsoid. The amount of entrapped Ca²⁺ per liposome reaches its maximum value when the Rhodopsin nearest-neighbor distance approaches its minimum value. This suggests an intermembrane protein-lipid-protein lattice, which serves as barriere for Ca²⁺. The influence of temperature or total used Ca²⁺ content is less profound. Increasing temperature yields slightly smaller liposomes.     

Continuous monitoring of lipid peroxidation by measuring conjugated diene formation in an aqueous liposome suspension

A method is described for the direct and continuous monitoring of lipid peroxidation in an aqueous suspension of sonicated liposomes. By means of ultraviolet difference spectroscopy using tandem cuvettes, the formation of conjugated dienes during liposome peroxidation can be followed. Using this technique, the effect of the fatty acid composition of liposomes on lipid peroxidation can be studied. The results show that both the extent and the time scale of lipid peroxidation are influenced by the fatty acid composition of the phospholipid liposomes. This was confirmed also by other methods, such as measurement of the formation of lipid hydroperoxides and measurement of the decrease in polyunsaturated fatty acids. The advantage of the method described is the direct and continuous monitoring of phospholipid peroxidation in an aqueous environment, without subsampling and extraction of peroxidation products into organic solvents. Using this experimental approach based on difference spectra the contributions from changes in liposome, CuSO₄ and H₂O₂ concentrations are canceled, thus improving sensitivity. The method can be employed for measuring the susceptibility to peroxidation of membrane phospholipids from fatty acid modified endothelial cells.     

New Insights into the Anti‐Inflammatory and Antioxidant Properties of Nitrated Phospholipids

Nitro‐fatty acids (NO₂‐FA) have been widely studied with regard to their identification, structural characterization, and biological actions. NO₂‐FA could also be present endogenously esterified to phospholipids (PL), and NO₂‐PL were already detected in cardiac mitochondria from diabetic rats and cardiomyoblasts subjected to starvation. However, the biological actions of NO₂‐PL have been overlooked. In this study, we evaluate the antioxidant and anti‐inflammatory potential of the nitrated 1‐palmitoyl‐2‐oleoyl‐sn‐glycero‐3‐phosphocholine (POPC) formed in vitro by incubation with NO₂BF₄, in a well‐recognized mimetic model of nitroxidative stress. Nitrated POPC showed anti‐radical ability to reduce both 2,2‐diphenyl‐1‐picrylhydrazyl radical (DPPH^?) (IC₂₀ = 225 ± 4 μg/mL; Trolox equivalent (TE) = 86 ± 6 μmol Trolox/g lipid) and 2,2′‐azino‐bis‐3‐ethylbenzothiazoline‐6‐sulfonic acid radical cation (ABTS^?+) (IC₅₀ = 124 ± 2 μg/mL; TE = 152 ± 9 μmol Trolox/g lipid). Also, higher lag times were achieved in oxygen radical absorbance capacity (ORAC) assay for nitrated POPC, indicating a faster reaction with oxygen‐derived radicals (TE = 1.03 ± 0.22 and TE = 1.30 ± 0.16 mmol Trolox/g lipid for nonmodified and nitrated POPC, respectively). Nitrated POPC showed the ability to inhibit lipid oxidation induced by the hydroxyl radical generated under Fenton reaction conditions, monitored by electrospray ionization (ESI) mass spectrometry (MS) using phosphatidylcholine (PtdCho) liposomes as a model of cell membrane. Nitrated POPC showed anti‐inflammatory potential, as assessed by the inhibition of inducible nitric oxide synthase (iNOS) expression in RAW 264.7 macrophages activated by the Toll‐like receptor 4 (TLR4) agonist lipopolysaccharide (LPS) in a well‐described in vitro model of inflammation. Altogether, this study provides new clues regarding the antioxidant and anti‐inflammatory potential of nitrated POPC, which should be explored in depth.     

Role of lipid structure in the activation of phospholipase A2 by peroxidized phospholipids

The time course of hydrolysis of a mixed phospholipid substrate containing bovine liver 1,2-diacyl-sn-glycero-3-phosphocholine (PC) and 1,2-diacyl-sn-glycero-3-phosphoethanolamine (PE) catalyzed byCrotalus adamanteus phospholipase A₂ was measured before and after peroxidation of the lipid substrate. The rate of hydrolysis was increased after peroxidation by an iron/adenosine diphosphate (ADP) system; the presence of iron/ADP in the assay had a minimal inhibitory effect. The rate of lipid hydrolysis was also increased after the substrate was peroxidized by heat and O₂. Similarly, peroxidation increased the rate of hydrolysis of soy PC liposomes that did not contain PE. In order to minimize interfacial factors that may result in an increase in rate, the lipids were solubilized in Triton X-100. In mixtures of Triton with soy PC in the absence of PE, peroxidation dramatically increased the rate of lipid hydrolysis. In addition, the rate of hydrolysis of the unoxidizable lipid 1-palmitoyl-2-[1-¹⁴C]oleoyl PC incorporated into PC/PE liposomes was unaffected by peroxidation of the host lipid. These data are consistent with the notions that the increase in rate of hydrolysis of peroxidized PC substrates catalyzed by phospholipase A₂ is due largely to a preference for peroxidized phospholipid molecules as substrates and that peroxidation of host lipid does not significantly increase the rate of hydrolysis of nonoxidized lipids.     

Cysteine-Encapsulated Liposome for Investigating Biomolecular Interactions at Lipid Membranes

The development of a strategy to investigate interfacial phenomena at lipid membranes is practically useful because most essential biomolecular interactions occur at cell membranes. In this study, a colorimetric method based on cysteine-encapsulated liposomes was examined using gold nanoparticles as a probe to provide a platform to report an enzymatic activity at lipid membranes. The cysteine-encapsulated liposomes were prepared with varying ratios of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and cholesterol through the hydration of lipid films and extrusions in the presence of cysteine. The size, composition, and stability of resulting liposomes were analyzed by scanning electron microscopy (SEM), dynamic light scattering (DLS), nuclear magnetic resonance (NMR) spectroscopy, and UV-vis spectrophotometry. The results showed that the increased cholesterol content improved the stability of liposomes, and the liposomes were formulated with 60 mol % cholesterol for the subsequent experiments. Triton X-100 was tested to disrupt the lipid membranes to release the encapsulated cysteine from the liposomes. Cysteine can induce the aggregation of gold nanoparticles accompanying a color change, and the colorimetric response of gold nanoparticles to the released cysteine was investigated in various media. Except in buffer solutions at around pH 5, the cysteine-encapsulated liposomes showed the color change of gold nanoparticles only after being incubated with Triton X-100. Finally, the cysteine-encapsulated liposomal platform was tested to report the enzymatic activity of phospholipase A₂ that hydrolyzes phospholipids in the membrane. The hydrolysis of phospholipids triggered the release of cysteine from the liposomes, and the released cysteine was successfully detected by monitoring the distinct red-to-blue color change of gold nanoparticles. The presence of phospholipase A₂ was also confirmed by the appearance of a peak around 690 nm in the UV-vis spectra, which is caused by the cysteine-induced aggregation of gold nanoparticles. The results demonstrated that the cysteine-encapsulated liposome has the potential to be used to investigate biological interactions occurring at lipid membranes.     

Enhanced Heat Stability of α‐Chymotrypsin through Single‐Enzyme Confinement in Attoliter Liposomes

The entrapment of α‐chymotrypsin (α‐CT) within 70–140 nm liposomes formed from POPC (1‐palmitoyl‐2‐oleoyl‐sn‐glycero‐3‐phosphocholine) leads to an unexpected and remarkable increase in the thermal stability of the enzyme. This finding is based on the observation that heating aqueous suspensions of α‐CT‐containing POPC liposomes to 80 °C for 30 minutes resulted in partial enzyme inactivation, whereas the same treatment of aqueous solutions of free α‐CT inactivated the enzyme completely. The stabilizing effect of enzyme confinement in the attoliter volumes of the liposomes was found to increase with decreasing numbers of α‐CT molecules per liposome. Single‐enzyme confinement was particularly effective, as intermolecular interactions between heat‐denatured α‐CT molecules (causing irreversible inactivation) are not possible.     

Quantitative Analysis of Phospholipids Using Nanostructured Laser Desorption Ionization Targets

Since its introduction as an ionization technique in mass spectrometry, matrix-assisted laser desorption ionization (MALDI) has been applied to a wide range of applications. Quantitative small molecule analysis by MALDI, however, is limited due to the presence of intense signals from the matrix coupled with non-homogeneous surfaces. The surface used in nano-structured laser desorption ionization (NALDI) eliminates the need for a matrix and the resulting interferences, and allows for quantitative analysis of small molecules. This study was designed to analyze and quantitate phospholipid components of liposomes. Here we have developed an assay to quantitate the DPPC and DC_8,9PC in liposomes by NALDI following various treatments. To test our method we chose to analyze a liposome system composed of DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) and DC_8,9PC (1,2-bis(tricosa-10,12-diynoyl)-sn-glycero-3-phosphocholine), as DC_8,9PC is known to undergo cross-linking upon treatment with UV (254 nm) and this reaction converts the monomer into a polymer. First, calibration curves for pure lipids (DPPC and DC_8,9PC) were created using DMPC (1,2-dimyristoyl-sn-glycero-3-phosphocholine) as an internal standard. The calibration curve for both DPPC and DC_8,9PC showed an R² of 0.992, obtained using the intensity ratio of analyte and internal standard. Next, DPPC:DC_8,9PC liposomes were treated with UV radiation (254 nm). Following this treatment, lipids were extracted from the liposomes and analyzed. The analysis of the lipids before and after UV exposure confirmed a decrease in the signal of DC_8,9PC of about 90%. In contrast, there was no reduction in DPPC signal.     

Direct Coagulation Casting of Alumina Suspension via Controlled Release of High Valence Counterions from Thermo‐sensitive Liposomes

Thermo‐sensitive liposomes were prepared using reverse phase evaporation method using natural lipid egg phosphatidylcholine (EPC) and cholesterol (CH). Inorganic salts containing high valence counterions (HVCI) are encapsulated by the liposomes. The phase transition temperature of the liposome is at 38°C with 50 wt% addition of cholesterol. The encapsulation rate of liposomes reaches 85% for high valence anion (SO₄^2?) and 55% for high valence cation (Ca²⁺). The liposomes are introduced into ceramic colloidal forming and dispersed in the suspension for identical charge with alumina particles at room temperature. The release of HCVI from the liposomes can coagulate the alumina suspension after heating at 38°C for 3 h, but the de‐moldable time is ~ 6–7 h. Dense ceramic products with relative density of above 98% and uniform microstructure can be prepared by this method without burnout process.     

Solubilization of model stratum corneum liposomes by quaternary ammonium surfactants

The solubilizing interactions of a series of quaternary ammonium surfactants [alkyl chain lengths C-12 (DoTAB), C-14 (TeTAB), and C-16 (HeTAB)] with liposomes formed by a mixture of lipids modeling the stratum corneum (SC) lipid composition (40% ceramides, 25% cholesterol, 25% palmitic acid, and 10% of cholesteryl sulfate) were investigated. Surfactant/lipid molar ratios (Re) and bilayer/aqueous phase partition coefficients (K) were determined by monitoring changes in static light scattering of the system during solubilization. Free surfactant concentration was always similar to the critical micelle concentration (CMC). A general assumption for phosphatidylcholine (PC) liposomes suggests that the free surfactant concentration must reach CMC for solubilization to occur. This assumption can be applied to SC liposomes in this study, and indicates that liposome solubilization was mainly driven by mixed micelle formation. The Re and K parameters fell as the surfactant alkyl chain length decreased or CMC increased. Thus, a higher CMC corrsponds to an increased ability of these surfactants to saturate or solubilize SC liposomes and to a lower degree of partitioning into liposomes or affinity with these bilayer structures. The overall balance of these opposing tendencies shows that TeTAB had the highest effectiveness with respect to the saturation and solubilization of SC structures in terms of total surfactant needed to produce these effects. Different trends in surfactant interaction with SC liposomes were observed when comparing Re and K parameters with those for PC liposomes. Because SC liposomes were more resistant to the surfactant action, the affinity of surfactants with these bilayer structures was higher in all cases.     

Elaboration of Lutein-Loaded Nanoliposomes Using Supercritical CO2

A batch process for producing lutein-loaded liposomes using supercritical CO₂ is studied. The effects of the variation of pressure (10 and 15 MPa), temperature (308, 313, and 318 K), and lutein to lipid ratio (0.5 and 1 wt%) on the liposome average size and size distribution are investigated, as well as on the encapsulation efficiency (EE) of lutein. This process is worked in a repeatable manner and is allowed the production of nanoliposomes with mean diameters (MDs) ranging from 65 ± 33 to 77 ± 40 nm, obtaining lutein EEs ranging from 82.1 ± 3.7% to 91.9 ± 2.9%. Temperature, pressure, and lutein to lipid ratio seem to have no impact on size, size distribution, and EE on formed liposomes. The use of low temperatures and low pressures allows the obtainment of liposomes with diameters less than 100 nm and limits the process energy cost. Moreover, the supercritical CO₂-assisted batch process effectively encapsulates lutein into liposome, an antioxidant molecule used for the prevention of retinal damage. Liposomes formed by this supercritical process have the desired characteristics for human target delivery. Practical applications: This work on the optimization of a process for developing liposomes in a supercritical environment has applications in medicine. Indeed, the liposomes formed with this process are nanoliposomes with a size of less than 80 nm. In addition, excellent lutein EEs (hydrophobic molecules) show that the liposomes formed constitute excellent coating matrices for the protection of active ingredients. These reasons make these liposome matrices applicable in nanomedicine (injection of sensitive drugs requiring protection before injection). The elaboration process also makes it possible to form liposomes with desired properties by changing pressure, temperature, or lecithin concentration. Therefore, this work focuses on the properties of liposomes as a function of the operating conditions.     

Solubilization of phospholipid bilayer caused by surfactants

The interaction of surfactants with liposomes eventually leads to the rupture of such structures and the solubilization of the phospholipid components. In this paper, solubilization is regarded as a decrease in light scattering of liposome suspensions. To this end, in accordance with the nomenclature, adopted by Lichtenberg, three parameters were considered as corresponding to the effective surfactant/lipid molar ratios (Re) at which light scattering starts to decrease, Re_sat; reaches 50% of the original value, Re₅₀; and shows no further decrease, Re_sol. These parameters corresponded to the Re at which the surfactant (i) saturated the liposomes, (ii) resulted in a 50% solubilization of vesicles and (iii) led to a total solubilization of liposomes. The surfactants tested were the nonionic surfactant octylphenol ethoxylated with 10 units of ethylene oxide or Triton X-100 (OP-10EO), two anionic surfactants, sodium dodecyl sulfate and sodium dodecyl ether sulfate, and an amphoteric surfactant dodecyl betaine (D-Bet). Unilamellar liposomes formed by egg phosphatidylcholine containing increasing amounts of phosphatidic acid were used. The Re parameters were the lowest for D-Bet, followed by OP-10EO, whereas the anionic surfactants always showed the highest values regardless of the electrical charge of the lipid bilayers. These parameters seem also to be inversely related to the critical micelle concentration (CMC) of the surfactant, except for OP-10EO. Moreover, the CMC values of the surfactant/lipid systems at 0.5 mM lipid concentration corresponded in all cases to the surfactant concentration at which liposomes were saturated by surfactants. As a consequence, this ratio can be regarded as an interesting parameter associated with the mixed micelle formation in liposome solubilization.     

Ionic Liquid‐Coated Nickel Phosphide Catalysts for Selective Hydrodesulfurization

Ni₂P/SiO₂ catalysts were coated with the ionic liquid (IL) 1‐butyl‐3‐methylimidazolium bis[(trifluoromethyl)sulfonyl]amide with different coating thicknesses and their selective hydrodesulfurization performances were investigated using a model fluid catalytic cracking gasoline. The selective factor on the IL‐coated catalysts (IL‐Ni₂P/SiO₂) first increased and then decreased as the initial mass ratio of IL to Ni₂P/SiO₂ catalyst ranged from 0.02 to 0.18. A maximum selectivity factor of 16.7 was found at a mass ratio of 0.10 which corresponds to full monolayer coverage on the original Ni₂P/SiO₂ catalyst by the IL. In comparison, the selectivity factor was 6.7 for the Ni₂P/SiO₂ catalyst, indicating a significant selectivity improvement by the IL coating method.     

Effect of Aminated Chitosan-Coated Fe3O4 Nanoparticles with Applicational Potential in Nanomedicine on DPPG,DSPC, and POPC Langmuir Monolayers as Cell Membrane Models

An adsorption process of magnetite nanoparticles functionalized with aminated chitosan (Fe₃O₄-AChit) showing application potential in nanomedicine into cell membrane models was studied. The cell membrane models were formed using a Langmuir technique from three selected phospholipids with different polar head-groups as well as length and carbon saturation of alkyl chains. The research presented in this work reveals the existence of membrane model composition-dependent regulation of phospholipid-nanoparticle interactions. The influence of the positively charged Fe₃O₄-AChit nanoparticles on a Langmuir film stability, phase state, and textures is much greater in the case of these formed by negatively charged 1,2-dipalmitoyl-sn-glycero-3-phospho-rac-(1-glycerol) (DPPG) than those created by zwitterionic 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and 2-oleoyl-1-palmitoyl-sn-glycero-3-phosphocholine (POPC). The adsorption kinetics recorded during penetration experiments show that this effect is caused by the strongest adsorption of the investigated nanoparticles into the DPPG monolayer driven very likely by the electrostatic attraction. The differences in the adsorption strength of the Fe₃O₄-AChit nanoparticles into the Langmuir films formed by the phosphatidylcholines were also observed. The nanoparticles adsorbed more easily into more loosely packed POPC monolayer.     

Effect of multilayer structure on high-frequency properties of FeCo/(FeCo)0.63(SiO2)0.37 nanogranular films on flexible substrates

The high-frequency properties of the FeCo-SiO₂ monolayer nanogranular films and FeCo/(FeCo)_0.63(SiO₂)_0.37 multilayer nanogranular films which were elaborated on flexible substrates by magnetron sputtering system were studied. Compared to the monolayer films with the same FeCo content, the multilayer structures comprised of FeCo/(FeCo)_0.63(SiO₂)_0.37 exhibit more excellent properties that the real and imaginary parts of permeability, more than the double value of the monolayer, increase to 250 and 350, respectively. The variation was considered owing to the reduction of the anisotropy field.