Synthesis and optical properties of novel double perovskite Ca_2MgTeO_6:Dy~(3+),Na~+ phosphors for white LEDs

Novel yellow-emitting phosphors of Dy~(3+)-doped double perovskite Ca_2 MgTeO_6 were synthesized by using a conventional high-temperature solid-state reaction.The phase purity,particle morphology,size distribution,elemental composition,luminescence properties,and luminescence decay curves of the resulting products were then analyzed in detail.The Ca2 MgTeO_6:Dy~(3+),Na~+ phosphors show three emission peaks after near-ultraviolet excitation at 350 nm,which correspond to ~4 F_(9/2)→~6 H_(11/2),~4 F_(9/2)→~6 H_(13/2),and ~4 F_(9/2)→~6 H_(13/2) transitions,respectively.Among them,the strongest peak is observed at 573 nm.The best doping content of Dy~(3+)in Ca_2 MgTeO_6:xDy~(3+),xNa~+ phosphors is x=5 mol%.The calculated critical distance of energy transfer between Dy~(3+) ions is 1.6 nm.Luminescence quenching is confirmed to be due to dipole-dipole interactions among Dy~(3+) ions.The phosphors show excellent thermal stability with high activation energy(0.27 eV).The Commission Internationale de l'Eclairage(CIE) chromaticity coordinates of the Ca_2 MgTeO_6 Dy~(3+),Na~+ phosphors are located in the yellow region.White light-emitting diodes(w-LEDs) were fabricated with a high color rendering index(R_a) of 88 and a good correlated color temperature(CCT) of 5440 K.All observed properties indicate that Ca_2 MgTeO_6:Dy~(3+),Na~+ phosphors have potential applications in display and photonic devices.     

Influence of dysprosium concentration on sensitivity of luminescent thermometers of phosphors Ca_9Tb(PO_4)_5(SiO_4)F_2

Tb~(3+),Dy~(3+)-co-doped Ca_9 Tb_xDy_(1-x)(PO_4)_5(SiO_4)F_2 phosphors were prepared via high-temperature solidphase reaction method and the potential application in optical temperature measurements due to their color-tunable property was investigated in detail.The photoluminescence emission(PL) and photoluminescence excitation(PLE) spectra results show that the as-prepared phosphors exhibit both Tb~(3+) and Dy~(3+) emissions at 546 nm(~5 D_4-~7 F_5 transition of Tb~(3+)) and 587 nm(~4 F_(9/2)-~6 H_(13/2) transition of Dy~(3+)) upon376 nm excitation,respectively.In addition,the fluorescence decay analysis shows that the lifetime of the Tb3+emission rapidly decreases,which confirms the energy transfer existence between Dy~(3+) and Tb~(3+).Under 376 nm excitation,the temperature dependence of the fluorescence intensity ratios for the dualmission bands peaked at 546 and 587 nm was studied in the temperature range from 303 to 573 K.The results show that with the increase of Dy~(3+) concentration,the relative sensitivity first increases and then decreases,what's more,the maximum relative sensitivity is 3.142×10~(-3)%/K for Ca_9 Tb_xDy_(1-x)(PO_4)_5(SiO_4)-F_2(x=0.4).As a consequence,this preliminary study provides a novel method for exploring the novel thermo meters.     

Luminescence properties of red phosphors Ca_（10）Li（PO_4）_7：Eu~（3＋）

A series of red phosphors Ca10Li (PO4)7:Eu3+ were synthesized by high temperature solid-state reaction method. Their luminescence properties were characterized by means of photoluminescence excitation and emission spectra,CIE chromaticity and quantum efficiency. Results indicated that the phosphors could be effectively excited by the near ultraviolet (NUV) light (393 nm). The main emission peaks of the phosphor were ascribed to the transition 5D0-7F2 (613 and 617 nm) of Eu3+ ion when samples were excited by...     

Multi-site occupancies and luminescence properties of cyan-emitting Ca9-xNaGd2/3(PO4)7:Eu2+phosphors for white light-emitting diodes

Cyan-emitting Ca₉NaGd_2/3(PO₄)₇:Eu²⁺phosphors were synthesized via high temperature solid-state route.X-ray powder diffraction(XRD)and scanning electron microscopy(SEM)were used to verify the phase and morphology of the Ca₉NaGd_2/3(PO₄)₇:Eu²⁺(CNGP:Eu²⁺)phosphors.The as-obtained phosphor exhibits a broad excitation band of 250-420 nm,which is near the ultraviolet region.An intense asymmetric cyan emission at 496 nm corresponds to the 5 d-4 f transition of Eu²⁺.The multiplesite luminescent properties of Eu²⁺ions in CNGP benefit from versatile structure ofβ-Ca3(PO4)2 compounds.The effective energy transfer distance is 5.46 nm(through the spectral overlap calculation),validating that the resonant energy migration type is via dipole-dipole interaction mechanism.Compared to the initial one at room temperature,the luminescent intensity of CNGP:Eu²⁺phosphor can maintain 77%as it is heated up to 420 K.A white light-emitting diode(WLED)with excellent luminesce nt properties was successfully fabricated.Moreover,the CIE chromaticity coordinates of fabricated WLED driven by changing current just change slightly.     

Synthesis and optical properties of novel apatite-type NaCa3Bi(PO4)3F:Dy3+ yellow-emitting fluorophosphate phosphors for white LEDs

In this study, novel yellow-emitting fluorophosphate NaCa₃Bi(PO₄)₃F phosphors doped with different concentrations of Dy³⁺ ions were first obtained via high-temperature solid-state reaction. The crystal structure, phase purity, particle morphology, photoluminescence (PL) properties, thermal stability, and luminescence decay curves of the resulting phosphors were then characterized in detail. Under the excitation of 349 nm, the three dominant peaks of the NaCa₃Bi(PO₄)₃F:Dy³⁺ are centered at 480 nm (⁴F_9/2-⁶H_15/2), 577 nm (⁴F_9/2-⁶H_13/2), and 662 nm (⁴F_9/2-⁶H_11/2). The optimal doping concentration of Dy³⁺ ions in the NaCa₃Bi(PO₄)₃F:xDy³⁺ phosphors is x = 5 mol%. The phosphors show excellent thermal stability with high activation energy (E_a = 0.32 eV). Eventually, the synthesized white light-emitting diode (w-LED) demonstrates the Commission International de L'Eclairage (CIE) chromaticity coordinates of (0.341, 0.334), a good correlated color temperature (CCT) of 5083 K, and a high color rendering index (R_a) of 92. Revealing its potential as yellow-emitting phosphors, the feasibility of the fabricated apatite-type NaCa₃Bi(PO₄)₃F:Dy³⁺ fluorophosphate phosphors was confirmed for w-LEDs.     

Luminescence properties of phosphate phosphors Ba3Gd1−x(PO4)3:xSm3+

A series of reddish orange phosphors Ba_3Gd_(1-x)(PO_4)_3:xSm~(3+)(x = 0.02.0.04,...,0.12) were prepared by the high-temperature solid-state reaction. X-ray powder diffraction(XRD) and diffuse reflectance and photoluminescence spectra were utilized to characterize the structure and spectral properties of the phosphors. The phosphors have strong absorption in the near-UV region. CIE chromaticity coordinates of the phosphors are located in the reddish orange region since the strongest emission band is around 598 nm and related to the ~4 G_(5/2)→~6 H_(7/2) transition of Sm~(3+). Optimal concentration of Sm~(3+) in the phosphors is about 6.0 at%. The quantum yield of the Ba_3Gd_(0.94)(PO_4)_3:0,06 Sm~(3+) under excitation at 403 nm is about 52.07%. Temperature dependent photoluminescence spectra of the Ba_3Gd_(0.94)(PO_4)_3:0.06 Sm~(3+) were measured and the phosphor exhibits high thermal stability of emission. All the results show that the Ba_3Gd(PO_4)_3:Sm~(3+) phosphor may be a potential red phosphor for near-UV based white LEDs.     

Structural and optical properties of Dy~(3+):YAlO_3 phosphors for yellow light-emitting diode applications

The spectroscopic properties of a series of Dy~(3+) single-doped and Dy~(3+)/Nd~(3+),Dy~(3+)/Tb~(3+),and Dy~(3+)/Tm~(3+)co-doped YAlO_3(yttrium aluminum perovskite,YAP) phosphors were investigated and compared through the measurements of optical absorption,emission spectra,and fluorescence decay curves.For the Dy~(3+) ion single-doped samples,the intensity of each absorption band increases with an increment in Dy~(3+) ion doping concentration,and the identified strong absorption peak at 447 nm indicates that Dy~(3+):YAP phosphors are suitable to be pumped by a blue laser diode(LD).For all co-doped samples,absorption peaks of Dy~(3+) ion along with some of the absorption bands of Nd~(3+),Tb~(3+),and Tm~(3+) ions are observed.Under 351 and 447 nm excitation,a prominent emission peak at 572 nm was obtained in all the samples,corresponding to Dy~(3+):~4 F_(9/2)→~6 H_(13/2) transition.Here,2 at% Dy~(3+):YAP phosphor exhibits the highest yellow emission intensity under 447 nm pumping.Among the three kinds of Dy~(3+) co-doped phosphors,Dy~(3+)/Tb~(3+):YAP phosphor possesses the dominant yellow emission.The fluorescence decay curves show exponential behaviour and are fitted well.The Commission International de L'Eclairage(CIE)chromaticity coordinates were calculated following the respective emission spectra,and it is found that all the coordinates locate in the yellow region.The energy transfer(ET) processes were investigated and the concentration quenching mechanism was discussed.The obtained results suggest that Dy~(3+)-activated YAP phosphors are good candidates for yellow LED applications.     

Energy transfer,superior thermal stability and multi-color emitting properties of langbeinite-type solid-solution phosphor K_2Dy_(1.5-x)Eu_xTa_(0.5)(PO_4)_3

Langbeinite type compounds are a large kind of oxometallate with good flexibility structure.Herein,we synthesized a new langbeinite type compound K_2 Dy_(1.5)Ta_(0.5)(PO_4)_3,in which the Dy~(3+) and Ta~(5+) were blended to occupy the same crystallographic sites.Simultaneously,solid solutions of K_2 Dy_(1.5)_(-x)Eu_xTa_(0.5)(PO_4)_3(x=0-1.5) were prepared and their photoluminescence properties were investigated.Due to energy transfer from Dy~(3+) to Eu~(3+),both Dy~(3+) and Eu~(3+) characteristic emissions are observed under 393 nm light excitation.The emitting color of K_2 Dy_(1.5-x)Eu_xTa_(0.5)(PO_4)_3 turns from green through yellow to red by simply adjusting the Eu~(3+) concentration from 0 to 0.4.Moreover,K_2 Dy_(1.48)Eu_(0.02)Ta_(0.5)(PO_4)_3 phosphor possesses excellent fluorescence thermal stability and exhibits zero thermal quenching at 150 ℃.These results manifest that K_2 Dy_(1.5-x)Eu_xTa_(0.5)(PO_4)_3 solutions are promising multi-color emitting phosphors candidate for near-UV LED.     

Single-phase white-emitting and tunable color phosphor Na3Sc2(PO4)3:Eu2+,Dy3+: Synthesis,luminescence and energy transfer

A series of Eu²⁺/Dy³⁺ single doped and co-doped Na₃Sc₂(PO₄)₃ phosphors were synthesized by the high-temperature solid-state method, and their phase, morphology, and luminescence properties were characterized. Under the excitation of 370 nm, the Na₃Sc₂(PO₄)₃:Eu²⁺,Dy³⁺ phosphor can emit white light whose spectrum is composed of a broad emission band centered at 460 nm and the other three peaks at 483, 577, and 672 nm, respectively. There is energy transfer from Eu²⁺ to Dy³⁺ ion in Na₃Sc₂(PO₄)₃:Eu²⁺,Dy³⁺ phosphor due to the good overlap between the emission spectrum of Na₃Sc₂(PO₄)₃:Eu²⁺ and the excitation spectrum of Na₃Sc₂(PO₄)₃:Dy³⁺, which is further confirmed by the fluorescence lifetime decrease of Eu²⁺ ion with the increase of Dy³⁺ concentration. The process of energy transfer is via dipole–quadruple interaction which is confirmed by applying Dexter's theory. By increasing the Dy³⁺ concentration, the color coordinates of the Na₃Sc₂(PO₄)₃:0.01Eu²⁺,xDy³⁺ phosphors can be adjusted from blue to white, and then to yellow. The optimized concentration of Dy³⁺ ions is 4.0 mol%, beyond which the concentration quenching will take place. The Na₃Sc₂(PO₄)₃:Eu²⁺,Dy³⁺ phosphor shows fairly good resistance to thermal quenching behavior, of which the emission intensity at 423 K can maintain 90.3% of the initial value (298 K). These results suggest that the Na₃Sc₂(PO₄)₃:0.01Eu²⁺,xDy³⁺ phosphors have potential applications as the color-tunable or a single-phase white emitting phosphor in white LEDs.     

Synthesis and luminescent properties of polycrystalline Gd2(MoO4)3:Dy3+ for white light-emitting diodes

Polycrystalline Gd₂(MoO₄)₃:Dy³⁺ phosphors have been synthesized by high temperature solid-state reaction method. The phosphors were characterized with X-ray diffractometer, thermogravimetric analysis and different scanning calorimeter, scanning electron microscopy, and photoluminescence spectrofluorimeter. Several peaks at 351, 389, 425, 452, and 472 nm appeared in photoluminescence excitation spectrum, which matched well with the emission of the ultraviolet (UV) and blue-light emitting diode (LED) chips. Upon excitation at 389 nm UV light, intense emissions centered at 484, 575 and 668 nm were attributed to the transitions of ⁴F_9/2→⁶H_15/2, ⁴F_9/2→⁶H_13/2 and ⁴F_9/2→⁶H_11/2 of Dy³⁺, respectively. The chromaticity coordinates and correlative color temperatures have been calculated and presented in the Commission International de I'Eclairage (CIE) diagrams. The results indicated that Gd_1.9(MoO₄)₃:Dy_0.1³⁺ with CIE coordinates of (x=0.38, y=0.41) and the correlative color temperature of 4134 K is a potential candidate for white LEDs.     

Hydrothermal synthesis,structure study and luminescent properties of YbPO4:Tb3+ nanoparticles

YbPO₄:Tb³⁺ were synthesized by mild hydrothermal method. The luminescent properties, morphologies and structure of the obtained powders were characterized by photoluminescence (PL) spectra, FESEM, X-ray diffractometer (XRD) and FTIR. The results showed that the prepared YbPO₄:Tb³⁺ nanoparticles were pure tetragonal phase and the average grain size varied with increasing of Tb³⁺ concentration. Hydrothermal temperature was revealed to be the key factor to enhance the emission intensity of YbPO₄:Tb³⁺ phosphors. The spherical nanoparticles could be effectively excited by near UV (369 nm) light and exhibited green performance at 543 nm (⁵D₄→⁷F₅), 489 nm (⁵D₄→⁷F₆) and 586 nm (⁵D₄→⁷F₄). The CIE chromaticity was calculated to be x=0.298, y=0.560. The YbPO₄:Tb³⁺ nanoparticles exhibited potential to act as UV absorber for solar cells to enhance the conversion efficiency.     

Tunable emission properties of tri-doped Ca_9LiY_(2/3)(PO_4)_7:Ce~(3+),Tb~(3+),Mn~(2+) phosphors with warm white emitting based on energy transfer

Tri-doped Ca_9 LiY_(2/3)(PO_4)_7:Ce~(3+),Tb~(3+),Mn~(2+)phosphors were prepared by a high-temperature solid state method.Under UV light excitation,Ca_9 LiY_(2/3)(PO_4)_7:Ce~(3+)samples exhibit a broad band ranging from 320 to 500 nm.At 77 K,the emission spectra of Ca_9 LiY_(2/3)(PO_4)7:Ce~(3+)samples present two obvious emission peaks,indicating that Ce~(3+)ions occupy two different kinds of lattice sites(Ca(1/2) and Ca(3)),As a good sensitizer for Tb~(3+),Ce~(3+)ions in Ca_9 LiY_(2/3)(PO_4)_7 lattice can effectively transfer part of energy to Tb~(3+),and the energy trans fer mechanism is determined to be dipole-dipole interaction.Consequently,the emitting color for Ce~(3+) and Tb~(3+) co-doped Ca_9 LiY_(2/3)(PO_4)_7 samples can be tuned from bluish violet to green.In order to further enlarge the emission gamut,Mn~(2+)ions as red emission components were added,forming tri-doped single-phase Ca_9 LiY_(2/3)(PO_4)_7:Ce~(3+),Tb~(3+),Mn~(2+)phosphors.The Ca_9 LiY_(2/3)(PO_4)_7:Ce~(3+),Tb~(3+),Mn~(2+)phosphors exhibit tunable emission properties through controlling the relative doping concentration of Ce~(3+),Tb~(3+)and Mn~(2+).Especially,Ca_9 LiY_(2/3)(PO_4)_7:0.09 Ce~(3+),0.12 Tb~(3+),0.30 Mn~(2+)can emit warm white light.The sample shows good thermal stability.At 150℃,the emission intensity for Ce~(3+)(360 nm),Tb~(3+)(545 nm) and Mn~(2+)(655 nm) decreases to 63%,69%,and 72% of its initial intensity,respectively.Moreover,the sample obtains good stability after 10 cycles between room temperature and150℃.     

Synthesis and luminescence properties of a novel red Sr3Bi（PO4）3：Sm^3＋ phosphor

A series of Sr3Bi1-x(PO4)3: xSm3+phosphors were prepared by solid state method at 1250 °C for 4 h. X-ray diffraction (XRD) indi-cated that the sample was of a pure phase of Sr3Bi(PO4)3. The main excitation peaks were located at 343 (6H5/2→4H9/2), 360 (6H5/2→4D3/2), 373 (6H5/2→6P7/2), 400 (6H5/2→4F7/2), 414 (6H5/2→6P5/2) and 467 nm (6H5/2→4I13/2). The main emission were located at 563 (4G5/2→6H5/2), 599 (4G5/2→6H7/2), 646 (4G5/2→6H9/2) and 708 nm (4G5/2→6H11/2). The intensest emission was excited by 400 nm. We studied the effect of differ-ent doping concentrations of Sm3+ activator on the luminescence properties and found that the luminescent intensity first increased with Sm3+ concentration increasing, and then decreased. The luminescent intensity had the best value when x=0.04. The chromaticity coordinates of the sample Sr3Bi0.96(PO4)3:0.04Sm3+ were (x=0.57, y=0.36), and the lifetime was 2.12 ms.     

A potential red-emitting phosphor Ca_2YTaO_6:Eu~(3+):Luminescence properties,thermal stability and applications for white LEDs

A novel red-emitting phosphor tantalate Ca_2 YTaO_6:Eu~(3+)was synthesized by a solid-state reaction.The purity and surface morphology of the phosphors were characterized.The Ca_2 YTaO_6:Eu~(3+)phosphors show a sharp emission peak at 612 nm under near-ultraviolet(n-UV) at 395 nm because of the ~5 D_0→~7 F_2 transition of Eu3+.The optimal Eu3+doping concentration in Ca2 YTaO_6 is 40 mol% and the critical energy-transfer distance of Eu3+ions was calculated to be 0.9 nm.The emission spectra of Ca_2 YTaO_6:Eu3+from 300 to 480 K were investigated.The thermal-quenching temperature(T_(0.5)) of Ca_2 YTaO_6:Eu~(3+)is above 480 K.The color purity of Ca_2 YTaO_6:40 mol%Eu3+is as high as 99.8%.The luminescence lifetime of Ca_2 YTaO_6:40 mol%Eu~(3+)was also discussed.The high color purity and high thermal stability of Eu~(3+)-doped Ca2 YTaO6 phosphors contribute to its application value in white lightemitting diodes(w-LEDs).     

Er~(3+)-Yb~(3+)-Na~+:ZnWO_4 phosphors for enhanced visible upconversion and temperature sensing applications

The crystal structure and surface morphology of the Er³⁺/Yb³⁺/Na+:ZnWO₄ phosphors synthesized by solid state reaction method were analyzed by X-ray diffraction(XRD) and field emission scanning electron microscopy(FESEM) analysis.The frequency upconversion(UC) emission study in the developed phosphors was investigated by using 980 nm laser diode excitation.The effect of codoping in the Er³⁺:ZnWO₄ phosphors on the UC emission intensity was studied.The UC emission bands that are exhibited in the blue(490 nm),green(530,552 nm),red(668 nm) and NIR(800 nm) region correspond to the ⁴F_7/2→⁴I_15/2.²H_11/2,⁴S_3/2→⁴I_15/2,⁴F_9/2→⁴I_15/2 and ⁴I9/2→⁴I_15/2 transitions,respectively.The temperature sensing performance of the Er³⁺-Yb³⁺-Na+:ZnWO₄ phosphors was investigated based on the 2 H_11/2→⁴I_15/2 and ⁴S_3/2→⁴I_15/2 thermally coupled transitions of the Er³⁺ions.The photometric study was also carried out for the developed phosphors.     

Excitation and luminescence of Dy^3＋ ions in PbO-P2O5-Ga2O3 glass system

Lead phosphate glasses singly doped with Dy3+ ions were studied. The samples were prepared in a glove box in order to eliminate hydroxyl groups. Local structures were examined using FT-IR. Excitation and luminescence spectra for Dy3+ ions in investigated lead phosphate glasses were registered. Luminescence intensity ratio Y/B related to 4F9/2→6HJ/2(where J=15, 13) transitions was determined and luminescence lifetime(τm) for the 4F9/2 state of Dy3+ ions were also measured.     

Blue-emitting Sr_(1-x)Ca_xLu_2O_4:Ce~(3+) phosphors for high CRI white LEDs

A broadband blue-emitting Sr_(1-x)Ca_xLu_2 O_4:Ce~(3+)(x=0-0.2) phospho rs were synthesized,which can be used for near-UV pumped white light-emitting diodes(w-LEDs).The crystal structures,photoluminescence pro perties,external quantum efficiency,the rmal stability and application perfo rmance of Sr_(1-x)Ca_xLu_2 O_4:Ce~(3+),by partially substituting Sr~(2+) with Ca~(2+)(x=0-0.2),were studied by various analytical techniques.When the Ca/Sr ratio of Sr_(1-x)Ca_xLu_2 O_4:Ce~(3+) gradually increases,the emission peak of Sr_(1-x)Ca_xLu_2 O_4:Ce~(3+) red-shiftes from 459 to 465 nm,corrected external quantum efficiency increases from 31.8% to 42.9%,and the thermal stability is also improved.The mechanism of the changes of the photoluminescence emission and excitation spectra,external quantum efficiency and thermal stability properties was also investigated in detail.In addition,a w-LED was fabricated by using SrLu_2 O_4:Ce~(3+)(blue),β-sialon:Eu~(2+)(green) and(Sr,Ca)AlSiN_3:Eu~(2+)(red) phosphors combined with a 405 nm near-UV LED chip,and its color rendering index(CRI) reaches 96.0.When Sr_(0.8)Ca_(0.2)Lu_2 O_4:Ce~(3+)is applied as blue phosphor to substitute SrLu_2 O_4:Ce~(3+),the obtained w-LED devices have high luminous efficiency,and CRI greater than 95.0.These re sults show that the Sr_(1-x)Ca_xLu_2 O_4:Ce~(3+) can be potential blue phosphors for n-UV pumped high CRI w-LEDs application.     

A tunable yellow emission from three-band emission of singly doped single-phased phosphor BaY_2S_4：Ho~（3＋）

The establishment of an approach to design tunable yellow emission through singly doped single-phased phosphors to obtain white LED-based InGaN chip was reported. BaY2-xS4:xHo3+ phosphors were prepared by the high temperature solid state reaction and characterized by X-ray diffraction and photoluminescence spectra. Under the excitation of 465 nm,the emission spectra of these phosphors exhibited three sharp emission lines peaked at about 492,543 and 661 nm of Ho3+ corresponding to 5F3,5F4 (5S2) and 5F5→5I8 t...     

Effective regulation of electronic structures and luminescence properties of LiGd9(SiO4)6-x(GeO4)xO2:Dy3+ phosphors by tetrahedral substitution

A series of Dy³⁺-activated phosphors with the general formula LiGd₉(SiO₄)_6-x(GeO₄)_xO₂:Dy₃₊(0 ≤ x≤ 3)characterized by an apatite-type structure were successfully synthesized via a simple solid-state technique involving a partial substitution of [SiO₄]^4-with [GeO₄]^4- species.The effects of homovalent[GeO₄]^4--[SiO₄]^4- substit...     

Spectral change and far-red emission of Mn2+ions co-doped NaSrB5O9:Dy3+luminescence material for plant growth LEDs

Due to the characteristic emission of phosphors,phosphor-converted LEDs have been employed to provide the requisite light sources for indoor plant growth in the optical agricultural industry.Herein,we prepared a series of Mn²⁺co-doped NaSrB5 O9:Dy³⁺phosphors via a solid-state reaction method.These phosphors have significant three-band emissions at 467 nm(blue region),606 nm(orange region),and765 nm(far-red region),ascribed to the⁴F_9/2-⁶H_15/2and 4 F9/2-6 H13/2 transitions of the Dy³⁺ions and the⁴T_1g(G)-⁶A_1g(S)spin-forbidden transition of the Mn²⁺ions,respectively,when excited by light of 376 nm(near-UV region).The co-dopant in the host material facilitates tunable photoluminescence(PL)due to energy transfer from the Dy³⁺ions to the Mn²⁺ions.The three emission peaks from the prepared phosphors well match with the absorption spectra of the photosynthesis pigments of plants,chlorophyll and phytochrome,which can absorb blue(400-500 nm),orange-red(550-700 nm),and infrared(IR)radiation,indicating that these phosphors have potential applications in the fabrication of plant-growth LEDs.Prior to the PL studies,the structure of the phosphors was determined by X-ray diffraction,refined by Rietveld method and chemically quantified by X-ray photoelectron spectroscopy.