Preparation and adsorption mechanism of polyvinyl alcohol/graphene oxide-sodium alginate nanocomposite hydrogel with high Pb(II) adsorption capacity

A series of polyvinyl alcohol (PVA)/graphene oxide (GO)-sodium alginate (SA) nanocomposite hydrogel beads were prepared through in situ crosslinking for Pb²⁺ removal. It was found that PVA and SA molecules were intercalated into GO layers through hydrogen bonding interactions, leading to the destruction of orderly structure of GO, while GO uniformly distributed in PVA matrix. With increasing PVA solution concentration, the hydrogel beads became more regular, a large number of polygonal pores with thin walls and open pores formed, the average pore size decreased, and the dense network structure formed. Meanwhile, the permeability of the composite hydrogel decreased, leading to the decline of Pb²⁺ adsorption capacity of the composite hydrogel. With increasing GO content, the ballability of the hydrogel beads was weakened, the pore size increased, and relatively loose network structure formed, resulting in an increase in permeability and Pb²⁺ adsorption capacity of the hydrogel, reaching up to 279.43 mg g⁻¹. Moreover, the composite hydrogel presented relatively good reusability for Pb²⁺ removal. The adsorption mechanism was explored and showed that the adsorption system of the composite hydrogel belonged to the second-order kinetic model and fitted Langmuir adsorption isotherm model for Pb²⁺ removal, which might be mono-layer chemical adsorption. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47318.     

Functionalized graphene oxide/carboxymethyl chitosan composite aerogels with strong compressive strength for water purification

A new type of polydopamine functionalized graphene oxide/carboxymethyl chitosan (DGO/CMC) composite aerogels was synthesized via sol–gel once-forming self-assembly and lyophilization. Polydopamine (PDA) on the surface of GO nanosheets replaced those traditional crosslinking agents to connect CMC chains via hydrogen bonding for the establishment of 3D porous aerogels. With the increasing proportion of CMC, the microstructure of aerogels changed from small pores to large plate-bridge-like pores. In addition, their maximum compressive strengths were 6.767, 11.94, and 16.98 MPa under 90% compressions, respectively, which increased in accordance with CMC content. Furthermore, the adsorption system of the aerogels was simulated well by the pseudo second-order kinetic model and the Langmuir isotherm model, with maximum mass adsorption capacities of 170.3, 186.8, and 312.8 mg/g for Cu²⁺, Ni²⁺, and Pb²⁺ ions, respectively. These composite materials have potential applications for water purification because of their simple and efficient synthesis and excellent recyclability and reusability.     

Competitive Adsorption of Ag+, Pb2+, Ni2+, and Cd2+ Ions on Vermiculite

Competitive adsorption of Ag⁺, Pb²⁺, Ni²⁺, and Cd² ions on vermiuculite in a binary, ternary, and quaternary mixture was investigated in batch experiments. The effects of the presence of Ag⁺, Ni²⁺, and Cd²⁺ ions on the adsorption of Pb²⁺ ions were investigated in terms of the equilibrium isotherm. Experimental results indicated that Pb²⁺ ions always favorably adsorbed on vermiculite over Ag⁺, Ni²⁺, and Cd²⁺ ions. The adsorption equilibrium data of Pb²⁺ ions better fitted the Langmuir model than the Freundlich model. The results showed that the pseudo-second-order kinetics model was in good agreement with the experimental results for all metal ions, and the adsorption rate among the metal ions followed Ag⁺ > Pb²⁺ > Ni²⁺ > Cd²⁺. The desorption and regenration study indicated that vermiculite can be used repeatedly and be suitable for the design of a continuous process.     

In situ crosslinking of poly(vinyl alcohol)/graphene oxide Nano-composite hydrogel: intercalation structure and adsorption mechanism for advanced Pb(II) removal

Based on the industrialized graphene oxide (GO) product, poly(vinyl alcohol) (PVA)/GO nano-composite hydrogels were prepared through in situ crosslinking by incorporation of N-[(trimethoxysilyl)propyl] ethylenediamine-triacetic acid sodium (CSA) as a compatibilizer. Introduction of CSA led to more efficient grafting of PVA molecules onto GO surface with increasing average layer thickness through covalent and hydrogen bonding interaction, while GO was exfoliated and uniformly distributed in PVA matrix. Addition of appropriate content of GO can improve the storage modulus and the effective crosslinking density (υ_e) of the composite hydrogel, and the network structure with GO as crosslinking point formed, resulting in the remarkable increase of the hydraulic impact resistance, mechanical strength and toughness of the hydrogel. Pb²⁺ adsorption capacity of the hydrogel increased with GO content, while the adsorption belonged to the second-order kinetic model and fitted Langmuir adsorption isotherm model, indicating the homogeneous nature of monolayer chemical adsorption of Pb²⁺. A relatively good reusability of the composite hydrogel beads for Pb²⁺ removal can be achieved.     

Effects of poly (vinyl alcohol) (PVA) content on preparation of novel thiol-functionalized mesoporous PVA/SiO2 composite nanofiber membranes and their application for adsorption of heavy metal ions from aqueous solution

Thiol-functionalized mesoporous poly (vinyl alcohol)/SiO₂ composite nanofiber membranes and pure PVA nanofiber membranes were synthesized by electrospinning. The results of Fourier transform infrared (FTIR) indicated that the PVA/SiO₂ composite nanofibers were functionalized by mercapto groups via the hydrolysis polycondensation. The surface areas of the PVA/SiO₂ composite nanofiber membranes were >290 m²/g. The surface areas, pore diameters and pore volumes of PVA/SiO₂ composite nanofibers decreased as the PVA content increased. The adsorption capacities of the thiol-functionalized mesoporous PVA/SiO₂ composite nanofiber membranes were greater than the pure PVA nanofiber membranes. The largest adsorption capacity was 489.12 mg/g at 303 K. The mesoporous PVA/SiO₂ composite nanofiber membranes exhibited higher Cu²⁺ ion adsorption capacity than other reported nanofiber membranes. Furthermore, the adsorption capacity of the PVA/SiO₂ composite nanofiber membranes was maintained through six recycling processes. Consequently, these membranes can be promising materials for removing, and recovering, heavy metal ions in water.     

Adsorption of metal cations on wool carbonising waste. Part 1. Adsorption isotherms

The adsorption of various metal ions (Hg²⁺, Ag⁺, Ni²⁺, Cr³⁺, Al³⁺, Zn²⁺ and Pb²⁺) on wool carbonising waste has been investigated to assess its possible use as an adsorbent in water pollution control. Isotherms show that few metal ions (Hg²⁺, Ag⁺ and Ni²⁺) are adsorbed satisfactorily by this material. Moreover, the adsorption capacity of the plant material within the carbonising waste is higher than that of the keratin fraction. Equations fitting the experimental data can be used for the design of processing units.     

Adsorption for metal ions of chitosan coated cotton fiber

A kind of adsorbent for metal ions, cotton fiber coated by high loading of chitosan (SCCH) was prepared. Its structure was characterized by elemental analysis, scanning electronic microscopy (SEM), Fourier transform infrared spectrum (FTIR), and wide‐angle X‐ray diffraction (WAXD). The adsorption properties of SCCH for Cu²⁺, Ni²⁺, Pb²⁺, Cd²⁺, such as saturated adsorption capacities, static kinetics, and isotherm were investigated. The adsorption for Ni²⁺, Pb²⁺, and Cd²⁺ was controlled by liquid film diffusion, but by particle diffusion for Cu²⁺. The adsorption process for Cu²⁺, Ni²⁺, Cd²⁺ could be described with Langmuir or Freundlich equation, but only with Freundlich equation for Pb²⁺. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation of thiourea functionalized polyvinyl alcohol‐coated magnetic nanoparticles and their application in Pb2+ ions adsorption

We have prepared a novel kind of magnetic nanoparticle with high adsorption capacity and good selectivity for Pb²⁺ ions by modifying the magnetic nanoparticles with polyvinyl alcohol (PVA) and thiourea. The resultant magnetic nanoparticles were used to adsorb Pb²⁺ ions from aqueous solution. The influence of the solution pH, the adsorption time, the adsorption temperature, coexisting ions, and the initial concentration of Pb²⁺ ions on the adsorption of Pb²⁺ ions were investigated. The results indicated that Pb²⁺ ions adsorption was an endothermic reaction, and adsorption equilibrium was achieved within 30 min. The optimal pH for the adsorption of Pb²⁺ ions was pH 5.5, and the maximum adsorption capacity of Pb²⁺ ions was found to be 220 mg/g. Moreover, the coexisting cations such as Ca²⁺, Co²⁺, and Ni²⁺ had little effect on adsorption of Pb²⁺ ions. The regeneration studies showed that thiourea functionalized PVA‐coated magnetic nanoparticles could be reused for the adsorption of Pb²⁺ ions from aqueous solutions over five cycles without remarkable change in the adsorption capacity. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40777.     

Radiation Preparation of Conducting Nanocomposite Membrane Based on (Copper/Polyacrylic Acid/Poly Vinyl Alcohol) for Rapid Colorimetric Sensor of Mercury and Silver Ions

In this study, poly acrylic acid/poly vinyl alcohol capped copper as nanocomposite membrane Cu–(PAAc/PVA) has been prepared using gamma radiation. Aqueous solution of 0.2 mol Cu²⁺ ions chemically reduction using ascorbic acid and PAAc/PVA as stabilizer. Cu²⁺ ions could be deposited uniformly on the matrix network of PAAc/PVA membrane. The resulting Cu–(PAAc/PVA) nanocomposites membrane exhibited rapid colorimetric detection of mercury and silver ions associated with notable color changes of the membrane from yellow to pale gray and dark green, respectively. A novel label colorimetric sensor membrane Cu–(PAAc/PVA) has been developed for sensitive detection of Hg²⁺, Ag⁺ ions basis of the UV spectrophotometer data. A detection limit as low as 10^?5 and 10^?6 M of Hg²⁺ and Ag⁺ ions was achieved. This article proved that the Cu–(PAAc/PVA) nanocomposites membrane is exhibited excellent selectivity toward Hg²⁺, Ag⁺ ions. The advantages to the determination of Hg²⁺, Ag⁺ ions using Cu(PAAc/PVA) nanocomposite membrane is simple, low cost, rapid and easy observation by naked eye, the developed Cu–(PAAc/PVA) colorimetric membrane candidate for the detection of toxic Hg²⁺, Ag⁺ ions in environmental and biological samples. The particles size of synthesized Cu was performed using Transmission electron microscopy (TEM) indicates that Cu nanoparticles of size 8 nm are formed by green method. Absorption spectra of Cu nanoparticles deposited in PAAc/PVA at 591 nm confirm the capped of Cu nanoparticles inside PAAc/PVA matrices. The synthesized Cu nanocomposite has been found to be more AC conducting at low frequency than Hg and Ag nanoparticles. The increasing increase in conductivity of membrane can be correlated due to the formation of localized electronic states in polymer matrix due to insertion of Cu nanoparticles.     

Effective Cd2+ chelating fiber based on polyacrylonitrile

A reusable chelating fiber containing polyamino–polycarboxylic acid ligands was prepared via the stepwise modification of polyacrylonitrile fiber with diethylenetriamine and chloroacetic acid. The amination and carboxylmethylation conditions were optimized, and the modified fiber was characterized by elemental analysis, XRD, SEM and FTIR. For Cd²⁺ in water, this chelating fiber has prominent adsorption abilities such as low adsorption limitation (0.001 mg/L), high adsorption capacity (1.34 mmol/g) and fast response speed (half-saturation adsorption time less than 0.5 min based on 1 mg/mL Cd²⁺). The effectiveness of this chelating fiber has been proved by using it to treat actual sewage water, where the concentration of Cd²⁺ was reduced from 0.540 to below 0.001 mg/L. This level easily meets drinking water standards (0.003 mg/L) issued by the World Health Organization. Moreover, this chelating fiber is also very effective at treating other metal ions such as Cu²⁺, Ca²⁺, Zn²⁺, Mg²⁺, Pb²⁺, Ni²⁺, Ag⁺ and Hg²⁺.     

Binding of heavy metal ions by formaldehyde-polymerized peanut skins

Peanut skin, when treated with formaldehyde to polymerize tannins, is a highly efficient substrate for removal of many heavy metal ions from aqueous waste solutions. The ions Ag¹⁺, Cd²⁺, Cr⁶⁺, Cu²⁺, Hg²⁺, Ni²⁺, Pb²⁺, Zn²⁺, as well as Ca²⁺ and Mg²⁺, were contacted with formaldehyde-treated peanut skin. Quantitative removal could be achieved with Ag¹⁺, Cd²⁺, Cu²⁺, Hg²⁺, Pb²⁺, and Zn²⁺. Capacity of the substrate for ions was promising for Pb²⁺ (2.1 meq/g substrate), Cu²⁺ (3.0 meq/g), and Cd²⁺ (1.3 meq/g). Sorption from a solution containing Cd²⁺, Cu²⁺, Hg²⁺, Ni²⁺, Pb²⁺, Zn²⁺, on a packed column of formaldehyde-treated peanut skin indicated that Hg²⁺, Pb²⁺, and Cu²⁺ were rapidly and completely bound to the packing, while Cd²⁺, Ni²⁺, and Zn²⁺ were poorly bound until the preferred ions had been removed from solution.     

Adsorption of metal cations on wool carbonising waste. Part 2. Adsorption mechanisms

In order to elucidate the mechanisms of adsorption of Hg²⁺, Ag²⁺, Ni²⁺, Cr³⁺, Al³⁺, Zn²⁺ and Pb²⁺ on wool carbonising waste, the possible role of the various ionisable groups (-SH, -SO₃H, -OSO₃H, -COOH and -NH₂) of the substrate has been considered together with the corresponding solubility products and dissociation constants of the metal salts thus formed.     

Synthesis and adsorption properties of macroporous cross‐linked polystyrene that contains an immobilizing 2,5‐dimercapto‐1,3,4‐thiodiazole with tetraethylene glycol spacers

A novel chelating resin macroporous cross‐linked polystyrene immobilizing 2,5‐dimercapto‐1,3,4‐thiodiazole via a hydrophilic tetraethylene glycol spacer (PS‐TEG‐BMT) is synthesized and the structure is characterized by means of Fourier transform infrared spectroscopy (FTIR), energy dispersive X‐ray microanalysis (EDX), and elementary analysis. Its adsorption capacity for several metal ions such as Hg²⁺, Ag⁺, Ni²⁺, Pb²⁺, Cd²⁺, Fe³⁺, Bi³⁺, Zn²⁺, and Cu²⁺ are investigated. The initial experimental result shows that this resin has higher adsorption selectivity for Hg²⁺ and Ni²⁺ than for the other metal ions and the introduction of hydrophilic TEG spacer is beneficial to increase adsorption capacities. The result also shows that the Langmuir model is better than the Freundlich model to describe the isothermal process of PS‐TEG‐BME resin for Hg²⁺. Five adsorption‐desorption cycles demonstrate that this resin are suitable for reuse without considerable change in adsorption capacity. POLYM. ENG. SCI., 45:1515–1521, 2005. © 2005 Society of Plastics Engineers     

Hydrophilic PVA-co-PE nanofiber membrane functionalized with iminodiacetic acid by solid-phase synthesis for heavy metal ions removal

A novel hydrophilic poly(vinyl alcohol-co-ethylene) (PVA-co-PE) nanofiber membrane for heavy metal ions removal was fabricated by the solid phase synthesis of iminodiacetic acid (IDA) on nanofiber membrane surfaces. The hydrophilic PVA-co-PE nanofiber membranes were activated with cyanuric chloride. The IDA was then covalently linked to the activated PVA-co-PE nanofiber membranes. The chemical structures of activated and functionalized PVA-co-PE nanofiber membranes were confirmed with FTIR–ATR. The morphology of PVA-co-PE nanofiber membranes were characterized with SEM. The increase in the amount of IDA on functionalized PVA-co-PE nanofiber membranes significantly improved the adsorption amount of Cu²⁺. The IDA functionalized PVA-co-PE nanofiber membranes demonstrated excellent adsorption capability of Cu²⁺, Co²⁺, Zn²⁺ and Ni²⁺. The adsorption of above heavy metal ions could be repeatedly regenerated by desorbing the ions adsorbed on nanofiber membranes. The novel IDA functionalized PVA-co-PE nanofiber membranes have great potential in the application of industry and drinking water treatment.     

Synthesis of ion‐imprinting chitosan/PVA crosslinked membrane for selective removal of Ag(I)

A novel ion‐imprinted membranes were synthesized for selective removal and preconentration for Ag(I) ions from aqueous solutions. The membranes were obtained via crosslinking of chitosan (CS), PVA, and blend chitosan/PVA using glutaraldehyde (GA) as crosslinker. The FTIR spectra were used to confirm the membrane formation. Comparing with the nonimprinted membranes, Ag(I)‐imprinted CS and CS/PVA has higher removal capacity and selectivity for Ag⁺ ions. An enhancement in the Ag⁺ removal capacity by ～ 20% (from 77.8 to 94.4 mg g^–1) and ～ 50% (from 83.9 to 125 mg g^–1) was found in the Ag(I)‐imprinted CS and Ag(I)‐imprinted CS/PVA membranes, respectively, when compared with the nonimprinted membranes. Removal equilibra was achieved in about 40 min for the non‐ and ion‐imprinted CS/PVA. The pH and temperature significantly affected the removal capacity of ion‐imprinted membrane. The relative selectivity coefficient values of Ag⁺/Cu²⁺ and Ag⁺/Ni²⁺ are 9 and 10.7 for ion‐imprinted CS membrane and 11.1 and 15 for ion‐imprinted CS/PVA membrane when compared with nonimprinted membranes. The imprinted membranes can be easily regenerated by 0.01M EDTA and therefore can be reused at least five times with only 15% loss of removal capacity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Reusability and selective adsorption of Pb<Superscript>2+</Superscript> on chitosan/P(2-acrylamido-2-methyl-1-propanesulfonic acid-<Emphasis Type="Italic">co</Emphasis>-acrylic acid) hydrogel

Reusability and selective adsorption toward Pb²⁺ with the coexistence of Cd²⁺, Co²⁺, Cu²⁺ and Ni²⁺ ions on chitosan/P(2-acrylamido-2-methyl-1-propanesulfonic acid-co-acrylic acid) [CS/P(AMPS-co-AA)] hydrogel, a multi-functionalized adsorbent containing –NH₂, –OH, –COOH and –SO₃H groups was studied. The CS/P(AMPS-co-AA) was prepared in aqueous solution by a simple one-step procedure using glow discharge electrolysis plasma technique. The reusability of adsorbent in HNO₃, EDTA-2Na and EDTA-4Na was investigated in detail. The competitive adsorption of the metal ions at the initial stage was compared between their equal mass concentration and equal molar concentration. In addition, the adsorption mechanism of the adsorbent for adsorption of Pb²⁺ was also analyzed by XPS. The results showed that the optimum pH of adsorption was 4.8, and time of adsorption equilibrium was about 180 min. Adsorption kinetics fitted well in the pseudo second-order model. The equilibrium adsorption capacities of Pb²⁺, Cd²⁺, Co²⁺, Cu²⁺, and Ni²⁺ at pH 4.8 were obtained as 673.3, 358.3, 176.7, 235.0 and 171.7 mg g^?1, in their given order. The adsorbent displayed an excellent reusability using 0.015 mol L^?1 EDTA-4Na solution as the eluent, and the desorption ratio could not correctly reflect the true characteristics of adsorption/desorption process. Moreover, the adsorbent showed good adsorption selectivity for Pb²⁺. The molar adsorption capacity at the initial stage with equal molar concentration was more reliable than the mass adsorption capacity during the study of selective adsorption. According to the XPS results, the adsorption of Pb²⁺ ions by the CS/P(AMPS-co-AA) absorbent could be attributed to the coordination between N atom and Pb²⁺ and ion-exchange between Na⁺ and Pb²⁺.     

A selective uphill transport of copper through bulk liquid membrane using Janus Green as an anion carrier

A bulk liquid membrane consisted of 1.8×10⁻⁴ M Janus Green in chloroform that placed between an aqueous source phase containing 0.5 M sodium thiocyanate at pH 7 and an aqueous receiving phase with 0.1 5 M histidine at pH 7 results in an uphill transport of copper from the source phase to the receiving phase. The amount of copper transport through the liquid membrane after 180 min was 97.0±1.7%. The presence of other metals such as Cd²⁺, Zn²⁺, Hg²⁺, Mg²⁺, Ag¹⁺, Ni²⁺, Pb²⁺, Fe³⁺, K¹⁺, Co²⁺ doesn't change the efficiency of copper transport.     

Synthesis and adsorption properties for metal ions of crosslinked chitosan acetate crown ethers

Two novel chitosan derivatives—crosslinked chitosan dibenzo‐16‐c‐5 acetate crown ether (CCTS‐1) and crosslinked chitosan 3,5‐di‐tert‐butyl dibenzo‐14‐c‐4 diacetate crown ether (CCTS‐2)—were synthesized by the reaction of crosslinked chitosan with dibenzo‐16‐c‐5 chloracetate crown ether and 3,5‐di‐tert‐butyl dibenzo‐14‐c‐4 dichloracetate crown ether with the intent of forming polymers that could be used in hazardous waste remediation as toxic metal‐binding agents in aqueous environments. Their structures were confirmed with elemental analysis, infrared spectral analysis, and X‐ray diffraction analysis. In the infrared spectra of CCTS‐1 and CCTS‐2, the characteristic peaks of aromatic backbone vibration appeared at 1595 cm⁻¹ and 1500 cm⁻¹; the intensity of the N H and O H stretching vibration in the region of 3150–3200 cm⁻¹ decreased greatly. The X‐ray diffraction analysis showed that the peak at 2θ = 20° decreased greatly in CCTS‐1 and CCTS‐2. The adsorption and selectivity properties of CCTS‐1 and CCTS‐2 for Pb²⁺, Cu²⁺, Cr³⁺, and Ni²⁺ were studied. Experimental results showed that the two crosslinked chitosan derivatives had not only good adsorption capacities for Pb²⁺, Cu²⁺, but also high selectivity for Pb²⁺, Cu²⁺ in the coexistence of Ni²⁺. For aqueous systems containing Pb²⁺, Ni²⁺, or Cu²⁺, Ni²⁺, CCTS‐1 only adsorbed Pb²⁺ or Cu²⁺. For aqueous systems containing Pb²⁺, Cr²⁺ and Ni²⁺, CCTS‐2 had high adsorption and selectivity properties for Pb²⁺. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 2069–2074, 1999     

Removal of metal ions using lignite in aqueous solution—Low cost biosorbents

Turkish lignite can be used as a new adsorption material for removing some toxic metals from aqueous solution. The adsorption of lignite (brown young coals) to remove copper (Cu²⁺), lead (Pb²⁺), and nickel (Ni²⁺) from aqueous solutions was studied as a function of pH, contact time, metal concentration and temperature. Adsorption equilibrium was achieved between 40 and 70 min for all studied cations except Pb²⁺, which is between 10 and 30 min. The adsorption capacities are 17.8 mg/g for Cu²⁺, 56.7 mg/g for Pb²⁺, 13.0 mg/g for Ni²⁺ for BC₁ (Ilg?n lignite) and 18.9 mg/g for Cu²⁺, 68.5 mg/g for Pb²⁺, 12.0 mg/g for Ni²⁺ for BC₂ (Beysehir lignite) and 7.2 mg/g for Cu²⁺, 62.3 mg/g for Pb²⁺, 5.4 mg/g for Ni²⁺ for AC (activated carbon). More than 67% of studied cations were removed by BC₁ and 60% BC₂, respectively from aqueous solution in single step. Whereas about 30% of studied cations except Pb²⁺, which is 90%, were removed by activated carbon. Effective removal of metal ions was demonstrated at pH values of 3.8–5.5. The adsorption isotherms were measured at 20 °C, using adsorptive solutions at the optimum pH value to determine the adsorption capacity. The Langmuir adsorption isotherm was used to describe observed sorption phenomena. The rise in temperature caused a slight decrease in the value of the equilibrium constant (K_c) for the sorption of metal ions. The mechanism for cations removal by the lignite includes ion exchange, complexation and sorption. The process is very efficient especially in the case of low concentrations of pollutants in aqueous solution, where common methods are either economically unfavorable or technically complicated.     

Effect of Receiving Phase Anion on Macrocycle-Mediated Cation Transport Rates and Selectivities in Water—Toluene—Water Emulsion Membranes

Abstract

Relative transport rates of metal nitrates (Na⁺, K⁺, Rb⁺, Cs⁺, Ag⁺, T1⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Zn²⁺, and Pb²⁺) were measured alone and in combination with either Pb²⁺, Ag⁺, or T1⁺ in a water-toluene-water emulsion membrane system. The toluene phase contained the surfactant Span 80 and the crown ether dicyclohexano-18-crown-6 (DC18C6). The aqueous receiving phase contained the lithium salt of one of the following anions: pyrophosphate, thiosulfate, hydroxide, chloride, formate, nitrate. In the case of the metal combinations, chloride and formate ions were not studied. Unless significant complexation occurred both between the transported cation and the anion in the receiving phase and between the cation and DC18C6 in the membrane phase, there was little or no transport of the cation from the source phase to the receiving phase. Selective removal of Pb²⁺ and of Ag⁺ from binary mixtures of these cations with each of the cations listed was demonstrated using the emulsion membrane.