Al2O3-based binders for corrosion resistance optimization of Al2O3–MgAl2O4 and Al2O3–MgO refractory castables

This work addresses the main aspects related to the use of alternative binders [hydratable (HA) or colloidal alumina (ColAlu)] in castables containing different spinel sources (pre-formed or in situ generated), in order to point out: (i) the features that control the corrosion behavior of these materials, and (ii) the key factors to better select a refractory composition. Thermodynamic calculations, corrosion cup-test and SEM analyses were carried out in order to evaluate the slag attack of the designed refractory compositions. According to the attained results, the alumina-based binders (HA or ColAlu) induced a more effective sintering process due to their high specific surface area, improving the physical properties and the binding level of the generated microstructure. The spinel grain size also played an important role in the corrosion behavior of these refractories, as the finer the particles, the greater their dissolution was into the molten liquid, leading to further precipitation of spinel in the solid–liquid interface as a continuous and thick layer. Among the evaluated compositions and considering the presence of silica fume, the most suitable formulation with optimized corrosion resistance was the one with in situ spinel generation and HA as a binder.     

Effect of carbon black on corrosion resistance of Al2O3–SiC–C castables to SiO2–MgO slag

Metallurgical solid waste recycling is the shape of things to come in green development of Chinese iron and steel industry. Utilization of ironworks slag for producing mineral wool at high temperature is an important approach. However, refractory lining is seriously corroded by the SiO₂–MgO based slag at 1600 °C during the production process. Different production steps need different atmospheres, the changeable service atmospheres (air and reducing atmosphere) put forward high requirements for slag resistance. The Al₂O₃–SiC–C castables containing carbon black are usually used in iron runner, which faces high-temperature service condition of 1450 °C–1500 °C. Nevertheless, the function of carbon black in the Al₂O₃–SiC–C castables at 1600 °C is till essentially unknown. In the current study, the carbon black was introduced to tabular alumina based Al₂O₃–SiC–C castables to improve corrosion resistance to SiO₂–MgO based slag at 1600 °C. The result showed that 0.4 wt% carbon black was suitable for the castables, which the slag resistance of castables was significantly improved. The carbon black had contributed to block slag by wettability resistance. By comparison with the castables without carbon black, the corrosion index and penetration index had been reduced by 20.2% and 28.0%, respectively, under air atmosphere. And there were little corrosion or penetration under reducing atmosphere for castables with 0.4 wt% carbon black. For the mechanical properties, the Al₂O₃–SiC–C castables with 0.4 wt% carbon black could serve production process although the carbon black impaired the physical properties.     

Fundamentals and applications on in situ spinel formation mechanisms in Al2O3–MgO refractory castables

Although the physical expansion associated with the in situ formation of magnesium–aluminate spinel (MgAl₂O₄) is well-reported, some questions related to this behavior, such as the different volume change values experimentally attained when compared to theoretical one and the pore generation after the reaction, remain open. Thus, the main objective of this work is to shed some light on these questions by evaluating a cement-bonded alumina–magnesia castables, designed using dead-burnt magnesia of different particle size ranges. Microstructural observations suggested that the faster Mg²⁺ migration during the spinel formation led to vacancy accumulation and, consequently, to pore generation, as a direct result of the Kirkendall effect. Additionally, the overall expansion of alumina–magnesia castables seemed to be ruled by two main factors: its sintering efficiency and the different possibilities of the Al₂O₃ and MgO interactions in the mixture. Those consequences, however, do not usually affect the castable corrosion behavior in industrial applications, due to the benefits imposed by the structural constraint.     

MgO−Al2O3−Cr2O3 refractories of increased corrosion resistance for nonferrous metallurgical furnaces

The paper sums up a study that had as its objective to develop MgO−Al₂O₃−Cr₂O₃ refractories of increased corrosion resistance for harsh service conditions. The refractories thus developed, designated PShKhM-1 and PShKhM-2, have better high-temperature strength and abrasion resistance than PKhS refractories manufactured commercially. The experimental refractories will enhance the durability of furnace and converter linings, extend their campaigns, step up their productivity, and reduce consumption of refractories and repair costs. Translated from Ogneupory i Tekhnicheskaya Keramika, No. 1, pp. 33–37, January, 1998.     

Thermodynamic calculation and microstructure characterization of spinel formation in MgO–Al2O3–C refractories

In this paper, by simulating the gas phase conditions inside the MgO–Al₂O₃–C refractories during continuous casting process and combining with thermodynamic analysis, as well as SEM analysis, the gas-gas and gas-solid formation of MA spinel were clarified in carbon containing refractories. Thermodynamic calculations showed that gas partial pressure of CO, O₂ and Mg could meet the formation and stable existence conditions of MA spinel in MgO–Al₂O₃–C refractories under service environment, and nitrogen could not affect the formation of MA spinel at 1550 °C in the thermodynamic condition. The formation processes of MA spinel were analyzed experimentally under embedding carbon atmosphere. The carbon-coated alumina powders in MgO–Al₂O₃–C refractories prevented the direct contact between magnesia and alumina. Mg gas was formed by carbon thermal reaction, then reacted with alumina (gas-solid) and gas containing aluminum (gas-gas) to generate MA spinel. Through gas-gas or gas-solid reaction, the formation of MA spinel was effectively controlled. By means of SEM analysis, a two-layer structure with dense outer spinel layer and loose inner layer was formed in MgO–Al₂O₃–C refractories.     

Thermal evolution of Al2O3–CaO–Cr2O3 castables in different atmospheres

Al₂O₃–CaO–Cr₂O₃ castables are required for various furnaces linings due to their excellent corrosion resistance. However, toxic and water-soluble Cr(VI) could be generated in these linings during service. In this study Al₂O₃–CaO–Cr₂O₃ castables were prepared and heated at 300–1500 °C in air and coke bed to simulate actual service conditions. The formations of various phases were investigated by XRD and SEM-EDS. The Cr(VI) compounds CaCrO₄ and Ca₄Al₆CrO₁₆ formed in air at 300–900 °C and 900–1300 °C respectively, while C₁₂A₇ and CA₂ were generated rather than forming Cr(VI) compounds in coke bed at 700–1300 °C. However, at 1500 °C, nearly all the chromium existed in the form of (Al_1-xCr_x)₂O₃ solid solution in both atmosphere. As a result, the specimens treated in air contained 185.0–1697.8 mg/kg of Cr(VI) at 500–1300 °C but only 17.2 mg/kg of Cr(VI) at 1500 °C, whereas specimens treated in coke bed exhibited extremely low Cr(VI) concentration in the whole temperature range studied. Moreover, in coke bed, the mutual diffusion between Cr₂O₃ and Al₂O₃ was suppressed and a trace of Cr₂O₃ would even be reduced to form chromium-containing carbides on its surface, which would hindered the sintering process and hence lower the density as well as strength of the castables.     

Effect of surface properties of MgO on its dissolution and spinel growth in CaO–SiO2–Al2O3 slag

The dissolution behavior of MgO in CaO–SiO₂–Al₂O₃ ternary slag at the interface of single-crystal, dense poly-crystal, and porous poly-crystal MgO was investigated to evaluate the effect of the surface properties of the MgO. The experimental results revealed that a detached spinel layer formed at the MgO interface due to the change in thermodynamic condition of the slag, which was independent of the surface properties. On the other hand, it was also confirmed that the growth rate and morphology of the detached spinel layer strongly depended on the surface properties, such as porosity and curvature of MgO. During the formation of the spinel layer at the interface during MgO dissolution, a kinetic approach adopting parabolic relation theory was employed to determine the correlation between the surface properties and the spinel growth mechanism.     

Effect of partial substitution of alumina–chromium slag for Al2O3 on microstructures and properties of Al2O3–SiC–C trough castables

Alumina–chromium slag (ACS), a cheap and abundant refractory raw material comprising aluminum–chromium oxides and β-Al₂O₃, is a byproduct of ferrochrome smelting. For this reason, we investigated the relationships between composition and mechanical properties, abrasion resistance, oxidation resistance, and resistance to iron slag erosion for Al₂O₃–SiC–C trough castables in which ACS was substituted for alumina. Due to the presence of β-Al₂O₃ in ACS, the aluminum-chromium slag reacted with SiO₂ to form a low-melting phase of albite and promoted the formation of mullite, which filled the pores at high temperatures and reduced the porosity, thereby promoting densification and strengthening of the sample. The cold mechanical properties of the sample and the normal temperature wear resistance were enhanced, but the high-temperature mechanical properties and the resistance to iron slag corrosion of the sample were impaired. According to the results of the anti-oxidation experiment, the presence of β-Al₂O₃ in the ACS reduced the porosity and made the sample more dense, which remarkably improved oxidation resistance of the sample. For industrial production requirements, ACS substitution should not exceed 48?wt% due to of thermomechanical properties and anti-slag corrosion performance in Al₂O₃–SiC–C trough castables.     

Preparation and characterization of HA bonded Al2O3–MgO based castables with superior slag resistance for the working lining of Si-killed stainless steel ladles

The study prepared Al₂O₃–MgO based castables bonded by hydratable alumina (HA) instead of calcium aluminate cement (CAC) for the working lining of Si-killed stainless steel ladles. The microstructure, phase composition, mechanical properties, and slag resistance of castables were investigated by SEM, XRD, and thermodynamic software FactSage®. The results indicated that the HA bonded castables showed superior hot flexural strength, thermal shock resistance and slag resistance than the CAC bonded castables, due to the optimized pore characteristics, less liquid content, and higher liquid viscosity of the castable matrix and the formation of a continuous insulating layer.     

Thermal Stability and Crystallization Kinetics of MgO–Al2O3–B2O3–SiO2 Glasses

To support commercialization of the MgO–Al₂O₃–B₂O–SiO₂-based low-dielectric glass fibers, crystallization characteristics of the relevant glasses was investigated under various heat-treatment conditions. The study focused on the effects of iron on the related thermal properties and crystallization kinetics. Both air-cooled and nucleation-treated samples were characterized by using the differential thermal analysis/differential scanning calorimeter method between room temperature and 1200°C. A collected set of properties covers glass transition temperature (T_g), maximum crystallization temperature (T_p), specific heat (ΔC_p), enthalpy of crystallization (ΔH_cryst), and thermal stability (ΔT=T_p—T_g). Using the Kinssiger method, the activation energy of crystallization was determined. Crystalline phases in the samples having various thermal histories were determined using powder X-ray diffraction (XRD) and/or in situ high-temperature XRD method. Selective scanning electron microscope/energy-dispersive spectroscopy analysis provided evidence that crystal density in the glass is affected by the iron concentration. Glass network structures, for air-cooled and heat-treated samples, were examined using a midinfrared spectroscopic method. Combining all of the results from our study, iron in glass is believed to function as a nucleation agent enhancing crystal population density in the melt without altering a primary phase field. By comparing the XRD data of the glasses in two forms (bulk versus powder), the following conclusions can be reached. The low-dielectric glass melt in commercial operation should be resistant to crystallization above 1100°C. Microscopic amorphous phase separation, possibly a borate-enriched phase separating from the silicate-enriched continuous phase can occur only if the melt is held at temperatures below 1100°C, that is, below the glass immiscibility temperature. The study concludes that neither crystallization nor amorphous phase separation will be expected for drawing fibers between 1200°C and 1300°C in a commercial operation.     

Effects of andalusite aggregate pre-fired at different temperatures on volume stability and oxidation resistance of Al2O3–SiC–C castables

In the present work, the effects of the pre-firing temperature of andalusite aggregates (5–3 mm) on the conversion of andalusite as well as the volume stability and oxidation resistance of the Al₂O₃–SiC–C castables were investigated. The phases of the andalusite aggregates were tested via X-ray diffraction, and their microstructures as well as those of the castables were characterized via scanning electron microscopy. The linear expansion of the castables decreased with increase in the pre-firing temperature of andalusite, as less residual andalusite in the pre-fired aggregates lowered its transformation in the castables during firing at high temperatures. Moreover, the higher amounts of SiO₂-rich glass produced by andalusite pre-fired at high temperatures and secondary mullite generated between andalusite and the matrixes were both favorable to the production of castables with denser structure. This prevented the diffusion of O₂ into the castables and improved their oxidation resistance.     

The influence of Al2O3 nanoparticles addition on the microstructure and properties of bauxite self–flowing low-cement castables

In this research, the impact of Al₂O₃ nanoparticles addition on microstructure, mechanical, and physical properties of bauxite self–flowing low-cement castables were investigated. Also, the optimum amount of Al₂O₃ nanoparticles is determined. For this propose, up to 3 wt% Al₂O₃ nanoparticles were added to the bauxite castable compositions. The physical and mechanical properties of castable compositions such as bulk density (BD), apparent porosity (AP), self-flow values (SFV), and cold crushing strength (CCS) were examined. Also, the X-ray diffraction (XRD) and scanning electron microscopy (SEM/EDX) techniques were used for detection the ceramic phase's formation and microstructural analysis of the castables compositions, respectively. Results show that addition of Al₂O₃ nanoparticles up to 1 wt% improved the properties of bauxite self–flowing low-cement castables. As well as, the use of Al₂O₃ nanoparticles led to the formation of the platy and needle crystalline phases such as hibonite (CaO·6Al₂O₃), calcium dialuminate (CaO·2Al₂O₃), and mullite (3Al₂O₃·2SiO₂), between the grain boundaries of the bauxite particles. Also, Al₂O₃ nanoparticles addition led to aforementioned phase formation occur at the lower temperatures.     

Preparation of CaCO3 coated corundum aggregates by dip-coating and heat treatment and its effects on the properties and microstructures of Al2O3–MgO castables

The CaCO₃ coated corundum aggregates were prepared by impregnating tabular corundum aggregates with sizes of 1–5 mm in calcium hydrogen citrate solution and heat treatment at 430 °C, which were also used in Al₂O₃–MgO castables. The effects of Ca²⁺/Cit^3? mole ratio in precursor solution on coating characteristics of CaCO₃ coated corundum aggregates as well as the effects of CaCO₃ coatings on properties and microstructure of castables were investigated. It is found that the thickness and continuity of CaCO₃ coating is increased and the size of CaCO₃ particles in coatings decreases first and then increases as Ca²⁺/Cit^3? mole ratio is decreased. High-temperature properties of castables are improved by in-situ formation of calcium hexaaluminate (CA₆) layer at aggregate/matrix interface after sintering at 1600 °C. The Al₂O₃–MgO castables exhibit the best thermal shock resistance when Ca²⁺/Cit^3? mole ratio is 1/3. It is contributed by deflections of cracks and consumptions of fracture energy in a continuous platelet CA₆ layer with thickness of 10 μm, which is in-situ formed through reaction between Al₂O₃ and CaO derived from CaCO₃ coatings. The present investigation provides a novel approach to enhance thermal shock resistance of the Al₂O₃–MgO castables.     

Effect of varying Al2O3 contents of CaO–Al2O3–SiO2 slags on lumped MgO dissolution

This study utilized the single hot thermocouple technique to examine the dissolution behavior of lumped magnesium oxide (MgO) in CaO–Al₂O₃–SiO₂ ternary slags. The aluminum oxide (Al₂O₃) content in the slag (C/S = 1) varied from 10% to 30%; the MgO sphere with a diameter of 1 mm was placed in molten slags at 1,550 °C. Results showed that the dissolution rate decreased as the Al₂O₃ content increased up to 20%. Over 20% Al₂O₃, MgAl₂O₄ was formed at the interface of MgO and it did not fully melt at 30% Al₂O₃. The dissolution behavior and the formation of MgAl₂O₄ were analyzed by a phase diagram provided by Factsage 7.0 software. In the case of less than 20% Al₂O₃ content, apparent sphere radii were measured; the shrinking core model was then applied to understand the dissolution mechanism. The dissolution rate of both slags was controlled by boundary layer diffusion. The dissolution rate at 20% Al₂O₃ slag appeared to fit the behavior to the boundary layer diffusion, although it deviated during the middle stage of the dissolution because of MgAl₂O₄ formation. The 10% Al₂O₃ slag fitted well to the boundary layer diffusion curve; the obtained diffusion coefficient was 0.94 × 10⁻⁹ m²/s.     

Characterization and sintering of gels in the system MgO–Al2O3–SiO2

Cordierite aerogels, made by supercritical drying, and xerogels, formed by ambient pressure drying, have been prepared by combining two different recipes. The chemical composition of the gels varied from stoichiometric cordierite 2MgO·Al₂O₃·5SiO₂ to 0·5MgO·1·4Al₂O₃·5SiO₂ due to different procedures for washing of the gels. The crystallization of nearly stoichiometric cordierite gels was shown to be relatively complex involving the formation of several metastable phases such as μ-cordierite (Mg₂Al₄Si₅O₁₈), spinel (Al₆Si₂O₁₃) and sapphirine (Mg₄Al₈Si₂O₂₀) before the equilibrium phase composition was obtained at around 1350°C. On the other hand, during crystallization of gels with stoichiometry close to 0·5MgO·1·4Al₂O₃·5SiO₂ the equilibrium phases mullite, cristobalite and α-cordierite were the major phases formed during heat treatment. A lower densification rate was observed for aerogels compared to xerogels due to a larger pore size. A lower crystallization temperature in aerogels probably due to heterogeneous nucleation reduced the densification. For gels with a composition near 0·5MgO·1·4Al₂O₃·5SiO₂ nucleation and densification occur simultaneously and large differences in the densification behavior was observed. ©     

Effect of MgO/Al2O3 ratio on the crystallization behaviour of Li2O–MgO–Al2O3–SiO2 glass-ceramic and its wettability on Si3N4 ceramic

The composition governs the crystallization ability, the type and content of crystal phases of glass-ceramics. Glass-ceramic joining materials have generated more research interest in recent years. Here, we prepared a novel Li₂O–MgO–Al₂O₃–SiO₂ glass-ceramic for the application of joining Si₃N₄ ceramics. We investigated the influence of the MgO/Al₂O₃ composition ratio on microstructure and crystallization behaviour. The crystallization kinetics demonstrated that the glasses had excellent crystallization ability and high crystallinity. β-LiAlSi₂O₆ and Mg₂SiO₄ were precipitated from the glass-ceramics, and the increase of MgO concentration was conducive to the precipitation of Mg₂SiO₄. Among the glass-ceramic samples, the thermal expansion coefficient of LMAS2 glass-ceramic was 3.1 × 10^?6/°C, which was very close to that of Si₃N₄ ceramics. The wetting test showed that the final contact angle of the glass droplet on the Si₃N₄ ceramic surface was 32° and the interface was well bonded.     

Radical reaction-induced Turing pattern corrosion of alumina refractory ceramics with CaO–Al2O3–SiO2–MgO slags

Quasi-volcanic corrosion occurs at the triple-phase interface of alumina refractory ceramics and MgO-containing CaO–Al₂O₃–SiO₂ slags in the air, causing severe damage to ceramics. To address this limitation, in this study, a slag corrosion experiment is performed on alumina refractory ceramics using CaO–Al₂O₃–SiO₂–MgO slags. Various spectroscopic techniques, including electron paramagnetic resonance spectroscopy, are used to investigate the influence of slag structures with varied MgO contents on the corrosion peaks and mechanism. The results show large quantities of reactive radicals, including superoxide radicals, in the slags. Free-radical reactions between refractory ceramics and slags lead to Turing pattern corrosion. An increase in the amount of non-bridged oxygen in the slag structure decreases the amount of original superoxide radicals. Consequently, the intensity of the free-radical reactions of alumina dissolution increases, thereby increasing the height of the corrosion peaks.     

Enhancement of thermal shock and slag corrosion resistance of MgO–ZrO2 ceramics by doping CeO2

The purpose of this paper was to develop ceramics materials with high thermal shock resistance and corrosion resistance for preparing gas blowing components. In this paper, MgO-rich MgO–ZrO₂ ceramics were obtained by using MgO powder and ZrO₂ powder as starting materials and CeO₂ as an additive. Changes in the properties in terms of thermal shock resistance, mechanical properties, and slag corrosion-resistance with chemical compositions were examined correlated to microstructure and phase changes. Especially, the effect of doping CeO₂ on phase transition of zirconia in MgO-rich system was discussed. The results showed that doping amount of CeO₂ significantly improved properties of MgO–ZrO₂ ceramics. Especially when doping amount of CeO₂ was 2 wt%, residual strength ratio was enhanced over 100% after thermal shock testing. In samples doped with CeO₂, ZrO₂ was stable in cubic or tetragonal form due to complete solution of CeO₂, which was important reason for the improvement of various properties of MgO–ZrO₂ ceramics.