Effect of annealing and heat moisture conditioning on the physicochemical characteristics of Bambarra groundnut (Voandzeia subterranea) starch

Isolated starch of Bambarra groundnut (Voandzeia subterranean) was subjected to hydrothermal modifications through annealing and heat moisture conditioning. Both annealing and heat moisture conditioning reduced the swelling power and solubility of the starch. Water binding capacity reduced after annealing heat moisture conditioning at 18% moisture level (HMB18) and heat moisture conditioning at 21% moisture level (HMB21). Both heat moisture conditioning at 24% moisture level (HMB24) and heat moisture conditioning at 27% moisture level (HMB27) increased the water binding capacity. Hydrothermal modifications reduced the oil absorption capacity of the raw starch. Annealing and heat moisture conditioning reduced the peak viscosity (Pv), viscosity at 95 degrees C (Hv) and viscosity at 95 degrees C after 30 min holding (Hv30). However, viscosity increased on cooling down to 50 degrees C after annealing. Annealing and heat moisture treatments as revealed by scanning electron micrograph and light micrograph did not alter the shape and size of the raw starch. The results indicate a rearrangement within the starch granule following hydrothermal treatments.     

Modification and properties of African yam bean (Sphenostylis stenocarpa Hochst. Ex A. Rich.) Harms starch I: Heat moisture treatments and annealing

African yam bean (Sphenostylis stenocarpa) starch was subjected to heat moisture treatments at 18% (HMT-18), 21% (HMT-21), 24% (HMT-24), 27% (HMT-27) and excess (Annealing) moisture levels. Proximate chemical composition of the starch samples revealed that the moisture content of the starches ranged between 6.7% and 12.5%. Following modification of the native starch, there was a reduction in the moisture level of the heat moisture treated starches from HMT-18 to HMT-27. However, the annealed starch (HMT-ANN) retained higher moisture content compared to native starch (AYB-Native). The carbohydrate, protein, ash, amylose and fat content reduced with all the forms of heat treatments. At the temperature range studied (60–90 °C), increasing level of heat moisture treatments reduced the solubility and swelling capacity. pH also exert a profound effect both on the solubility and the swelling of the starch. Increasing degree of alkalinity increased both solubility and swelling capacity. In the native and modified starch samples, replacement of the wheat flour by the starch resulted in increased alkaline water retention of the blends. Water absorption capacity of the starch increased with the severity of moisture treatments, while the oil absorption capacity decreased. Apart from HMT-18, there was improved gel forming capacity of all the other heat-modified starches.Pasting temperature increased after hydrothermal modifications, whereas peak viscosity (P_v), Hot Paste Viscosity (H_v), setback and breakdown values all reduced after heat moisture treatments. All the starches were of type-B viscosity.Differential scanning calorimetry studies revealed that heat moisture treatment shifted the onset temperature (T_o), peak temperature(T_p) and conclusion temperature (T_c) to higher values. The gelatinisation temperature of the annealed starch was comparable to native starch. In addition, gelatinisation band of the native starch increased progressively from HMT-18 to HMT-27. Heat moisture treatment reduced the gelatinsation enthalpy (ΔH), while the enthalpy of retrogradation(ΔH_r) increased with the storage time of the gelatinised starch. Retrogradation enthalpy of the heat moisture conditioned starches were lower than the value obtained for the native starch.X-ray diffraction studies of the starch indicated that all the starch samples showed the type-C diffraction pattern. Differences were however observed in their degree of crystallinity. Native starch exhibited the lowest crystallinity (20%) while annealed starch had the highest crystallinity (27%)Microscopy studies revealed surface indentation, formation of groves in the central region, folding of starch granules and formation of doughnut-like appearance in some of the starch samples.     

热处理改性淀粉的理化性质、结构和消化特性的研究进展（网络首发、推荐阅读）

热处理改性淀粉具有操作简单、污染少、产品安全性高的优点,是最常用的淀粉物理改性方法。主要总结了干热处理、湿热处理和韧化处理对淀粉理化性质、结构性质和消化性质的影响,也总结了添加亲水胶体辅助热处理和多种热处理方法联合处理对淀粉理化性质及消化性质的影响。研究发现热处理改性能够提高淀粉热稳定性和抗消化能力。热处理改性对淀粉性质的影响与热处理改性方式、淀粉种类和来源有关,其中湿热处理和韧化处理过程水分含量较高,能使淀粉的溶胀力和溶解度发生显著改变。三种热处理方法均能够改变淀粉相对结晶度,湿热处理还能改变淀粉的结晶晶型。除韧化处理外,干热处理和湿热处理均能改变淀粉颗粒结构。添加亲水胶体辅助热处理或热处理方法联合处理能增强热处理改性对淀粉理化性质和消化性质的影响。这为热处理改性淀粉的进一步研究及应用提供参考。     

天然的,物理和化学改性的面包果淀粉的功能特性

淀粉从面包果中分离出来,它通过氧化、乙酰化、热湿处理和退火作用而深度改性。研究了天然和改性淀粉的功能特性,近似分析表明,通过退火、氧化和乙酰化作用改性的淀粉比天然淀粉有较高的湿度,而通过热湿作用改性的淀粉有较低的湿度。除了天然淀粉和退火淀粉有相同的天然纤维含量(042％)之外,其它改性淀粉的天然纤维含量均降低。通过改性之后,蛋白质和脂肪含量也降低了。乙酰化、氧化和热处理作用提高了天然淀粉的膨胀力。     

Hydrothermal Modifications of Tropical Tuber Starches. 1. Effect of Heat‐Moisture Treatment on the Physicochemical,Rheological and Gelatinization Characteristics

Cassava, sweet potato and arrowroot starches have been subjected to heat‐moisture treatment (HMT) under different conditions using a response surface design of the variables. A comparative study was performed on the pasting properties, swelling behaviour and the gelatinization properties of the modified starches and also on the rheological and textural properties of their pastes. X‐ray diffraction studies have shown that cassava starch exhibited a slight decrease in crystallinity, whereas sweet potato and arrowroot starches showed an increase in crystallinity after HMT at 120ºC for 14 h with 20% moisture. The swelling volume was reduced and the solubility was enhanced for all three starches after HMT, but both effects were more pronounced in the case of arrowroot starch. The decrease in paste clarity of the starch after HMT was higher in the case of cassava and sweet potato starches. Viscosity studies showed that the peak viscosity of all three starches decreased after HMT, but the paste stability increased as seen from the reduced breakdown ratio and setback viscosity. Studies on rheological properties have shown that storage and loss moduli were higher for the starches heat‐moisture treated at higher moisture and lower temperature levels than the corresponding native starches. Storage of the gel at ‐20ºC resulted in a significant increase in storage modulus for all the three starches. All the textural parameters of the gels were altered after the treatment which depended on the nature of the starch and also the treatment condition.     

Functional Properties of Modified Black Gram (Phaseolus mungo L.) Starch

Black gram (Phaseolus mungo L.) starch was modified by heat and moisture treatments, acetylation, oxidation, cross-linking, and adding free fatty acids (palmitic, stearic, and linoleic). Heat and low moisture treatment, acetylation, oxidation, and cross-linking lowered the starch gelatinization temperature by 1–6°C, while adding fatty acids and the high moisture-heat treatment raised it by 1–4°C. All modifications caused an increase in least gelation concentration of starch. High moisture-heat treatment increased both water and oil absorption of starch. At 95°C, heat-moisture treated, acetylated, and oxidized starches were more soluble, while fatty acid treated and cross-linked starches were less soluble compared to raw starch. The modified starches had greater swelling capacity and solubility at pH 2.0 and 10.0. Heat-moisture treated and chemically modified starches had lower swelling capacity (at 95°C) than that of isolated starch, whereas addition of fatty acids increased it.     

Physicochemical,crystallinity, pasting and thermal properties of heat‐moisture‐treated pinhão starch

The effect of heat‐moisture treatment (HMT) on the properties of pinhão starches under different moisture and heat conditions was investigated. The starches were adjusted to 15, 20 and 25% moisture levels and heated to 100, 110 and 120°C for 1 h. The X‐ray diffractograms, swelling power, solubility, gel hardness, pasting properties and thermal properties of the native and HMT pinhão starches were evaluated. Compared to native starch, there was an increase in the X‐ray intensity and gel hardness of HMT starches, with the exception of the 25% moisture‐treated and 120°C heat‐treated starch. HMT reduced the swelling power and solubility of the pinhão starches when compared to native starch. There was an increase in the pasting temperature, final viscosity and setback and a decrease in the peak viscosity and breakdown of HMT pinhão starches compared to native starch. HMT increases the gelatinisation temperature of native pinhão starch and reduces gelatinisation enthalpy.     

Functional Properties and Retrogradation of Heat‐Moisture Treated Wheat and Potato Starches in the Presence of Hydroxypropyl β‐cyclodextrin

Some functional and retrogradation properties of native and heat‐moisture treated potato and wheat starches were examined in the presence of hydroxypropyl β‐cyclodextrin (HPβ‐CD). HPβ‐CD increased swelling factor, amylose leaching, and solubility of both native and heat‐moisture treated wheat starches but it had less impact on corresponding potato starches. Gelatinization enthalpy of native wheat starch was decreased in the presence of HPβ‐CD but was increased in potato starch with increasing concentration. Reduction of amylose‐lipid complex endotherm in both native and heat‐moisture treated wheat starch was observed in the presence of HPβ‐CD. Heat‐moisture treatment did not change the transition parameters of amylose‐lipid complex showing its resistance to hydrothermal treatment. HPβ‐CD greatly decreased the pasting temperature of wheat starch. Cold paste viscosity of both native and heat‐moisture treated wheat starch was increased by HPβ‐CD to a greater extent than corresponding potato starch. Amylopectin retrogradation of all the starches was unaffected in the presence of HPβ‐CD but heat‐moisture treatment slightly decreased retrogradation of potato starch. These results suggest that HPβ‐CD can disrupt the amylose‐lipid complex within the starch granule in both native and heat‐moisture treated wheat starch but has no influence on amylopectin retrogradation. However, greatly increased wheat starch setback with HPβ‐CD indicates its greater effect on wheat starch amylose retrogradation.     

Effect of lysine incorporation,annealing and heat moisture treatment alone and in combination on the physico-chemical,retrogradation, rheological properties and in vitro digestibility of kithul (Caryota urens L.) starch

Physico-chemical, retrogradation, rheological properties and in vitro digestibility of lysine incorporated kithul starch modified by annealing, heat moisture treatment and its combinations were studied. LS-AHMT (annealed-heat moisture treated lysine incorporated kithul starch) exhibited lowest amylose leaching. LS-AHMT showed significantly (P ≤ 0.05) higher relative crystallinity. LS-ANS (annealed lysine incorporated kithul starch), LS-HMT (heat moisture treated lysine incorporated kithul starch) and LS-AHMT formed more weak gel by the effect of annealing, heat moisture treatment and its combination. LS-AHMT showed lowest pasting viscosities, G′ and G″ values among the modified kithul starch, which indicates its lower retrogradation properties. In vitro digestibility of kithul starch decreased after modifications and LS-ANS, LS-HMT and LS-AHMT showed significantly higher resistant starch content. The current study showed that annealing, heat moisture treatment and its combination on NS-LS (lysine incorporated kithul starch) effectively modified kithul starch properties.     

Effect of Heat‐Moisture Treatment on Structural and Thermal Properties of Rice Starches Differing in Amylose Content

Starches from glutinous rice (1.4% amylose), Jasmine rice (15.0% amylose) and Chiang rice (20.2% amylose) were exposed to heat‐moisture treatment (HMT) at 100 °C for 16 h and at different moisture levels (18, 21, 24 and 27%). The effect of heat‐moisture treatment on structural and thermal properties of these three rice starches was investigated. The HMT did not change the size, shape and surface characteristics of rice starch granules. The A‐type crystalline pattern of rice starches remained unchanged after HMT. The relative crystallinity (RC) and the ratio of short‐range molecular order to amorphous (RSA) of heat‐moisture treated glutinous and Jasmine rice starches decreased with increasing moisture level of the treatments. In contrast, the RC of the treated Chiang rice starch remained practically unchanged. A peak of crystalline V‐amylose‐lipid complexes was clearly presented in all treated Chiang rice starches. The peak became progressively stronger with increasing moisture level of the treatment. Differential scanning calorimetry (DSC) of all treated rice starches showed a shift of the gelatinization temperature to higher values. Increasing moisture level of the treatments increased the onset gelatinization temperature (T_o) but decreased the gelatinization enthalpy (ΔH) of rice starches. A broad gelatinization temperature range (T_c‐T_o) with a biphasic endotherm was found for all treated Chiang rice starches and Jasmine rice starch after HMT₂₇ (HMT at 27% moisture level). Additionally the (T_c‐T_o) of treated Chiang rice starches increased linearly with increasing moisture level of the treatments.     

THE FLOW PROPERTIES OF NATIVE, HEAT-MOISTURE TREATED, AND ANNEALED STARCHES FROM WHEAT, OAT, POTATO AND LENTIL

The effect of heat-moisture treatment (30% moisture, 100C, 16 h) and annealing (75 % moisture, 50C, 72 h) on the flow behavior of gelatinized starch pastes from wheat, oat, lentil and potato starches were studied at a concentration of 6% starch with a cone and plate viscometer (Wells Brookfield RVTDV II CP 200). The power law rheological model (σ=Kγⁿ) was used to describe the flow behavior of the above starch pastes. All native starches exhibited a non-Newtonian shear thinning behavior. A thixotropic loop was evident only in oat starches and native potato starch. Among native starches, the magnitude of the shear thinning index (n) followed the order: oat > wheat > lentil > potato, while the corresponding order for the consistency index (K) was: potato > lentil > wheat > oat. Heat-moisture treatment decreased the K value of all starches. On annealing, K decreased in wheat and lentil starches, but increased in potato and oat starches. Heat-moisture treatment and annealing increased the n value of wheat, lentil and potato starches, but decreased that of oat starch. In all starches, the modification to the flow behavior was more marked on heat-moisture treatment than on annealing.     

Hydroxypropylation of pigeon pea (Cajanus cajan) starch: Preparation, functional characterizations and enzymatic digestibility

Hydroxypropyl starch derivatives were prepared from pigeon pea starch (NPPS) which is an unconventional starch source. Functional parameters and characterization of both native and modified starches were carried out. The starch granules appeared oval or elliptical in shape with sizes ranging from 7 to 40 μm in width and 10 − 30 μm in length. Hydroxypropylation did not alter the shape of the starch granules in a pronounced way. Generally, the x-ray diffractograms of native pigeon pea starch showed the “A” pattern. However, slight reductions in the diffraction intensity of starches after modification were observed. At all temperatures studied (30-90 °C), swelling and solubility of hydroxypropylated starches were higher than the NPPS. Progressive increases in swelling capacity and solubility were observed as the molar substitution (MS) increased among the hydroxypropylated starches. Hydroxypropylation reduced starch paste turbidity on storage. Also, studies showed that syneresis reduced after hydroxypropylation. In addition, syneresis reduced as the MS of the hydroxypropyl starches increased. The results indicate that pasting temperature and peak temperature reduced after modification but peak viscosity increased in hydroxypropylated starch derivatives compared with the native starch. Setback reduced in hydroxypropylated starches compared with the native starch. Enthalpy of gelatinization and percentage retrogradation reduced after hydroxypropylation and progressive reductions were observed as the MS increased among the starch derivatives. Hydroxypropylation increased enzymatic digestibility.     

Effects of microwave heat-moisture treatment on properties of waxy and non-waxy rice starches

Waxy and non-waxy rice starches adjusted to 20% moisture (wet basis, w.b.) were heat-moisture treated in a microwave oven to determine the effects of the microwave heating characteristics on digestibility, pasting, and morphological properties of the heated starches. Microwave heating produced only minimal changes in digestibility as well as the physical characteristics of heated starches. Significant changes in viscosity properties after microwave heat treatment were observed for both waxy and non-waxy starches heat-treated in a microwave oven, relative to non-treated samples. Non-waxy starch heated in microwave oven showed an increase in breakdown viscosity from 29.8 RVU (non-treated starch) to 35.8 RVU after heating for 60 min. However, for waxy starch, breakdown viscosity decreased from 112.7 to 35.9 RVU after 60 min of microwave heat treatment, reflecting an increased stability of microwave heat-treated starch under cooking. The data obtained in this study indicate that there was much higher re-aggregation of starch granules in waxy starch after microwave heat treatment than occurred in non-waxy starch, suggesting a re-association of amylopectin branch chains in the heat-treated waxy starch.     

Effect of single and dual hydrothermal treatments on the crystalline structure,thermal properties,and nutritional fractions of pea,lentil, and navy bean starches

Pea, lentil and navy bean starches were annealed at 50 °C (70% moisture) for 24 h and heat-moisture treated at 120 °C (30% moisture) for 24 h. These starches were also modified by a combination of annealing (ANN) and heat-moisture treatment (HMT). The impact of single and dual modifications (ANN–HMT and HMT–ANN) on the crystalline structure, thermal properties, and the amounts of rapidly digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS) were investigated. Birefringence remained unchanged on ANN but decreased on HMT. Granular swelling and amylose leaching decreased on ANN and HMT. Relative crystallinity, gelatinization enthalpy, and short-range order on the granule surface increased on ANN but decreased on HMT. Gelatinization transition temperatures increased on ANN and HMT. Gelatinization temperature range decreased and increased on ANN and HMT, respectively. ANN and HMT increased SDS and decreased RS levels in all starches. However, RDS levels increased on ANN and HMT in pea and lentil starches but decreased in navy bean starch. In gelatinized starches, ANN and HMT decreased RDS level and increased SDS and RS levels. Changes to crystalline structure, thermal properties and amounts of RDS, SDS, and RS were modified further on ANN–HMT and HMT–ANN.     

Heat‐Moisture Treatment and Enzymatic Digestibility of Peruvian Carrot,Sweet Potato and Ginger Starches

The aim of this work was to study the effects of heat‐moisture treatment (27% moisture, 100°C, 16 h) and of enzymatic digestion (alpha‐amylase and glucoamylase) on the properties of sweet potato (SP), Peruvian carrot (PC) and ginger (G) starches. The structural modification with heat‐moisture treatment (HMT) affected crystallinity, enzyme susceptibility and viscosity profile. The changes in PC starch were the most pronounced, with a strong decrease of relative crystallinity (from 0.31 to 0.21) and a shift of X‐ray pattern from B‐ to A‐type. HMT of SP and G starch did not change the X‐ray pattern (A‐type). The relative crystallinity of these starches changed only slightly, from 0.32 to 0.29 (SP) and from 0.33 to 0.32 (G). The extent of these structural changes (PC > SP > G) altered the susceptibility of the starches to enzymatic attack, but not in same order (PC > G > SP). HMT increased the starches digestion, probably due to rearrangement of disrupted crystallites, increasing accessible areas to attack of enzymes. The viscosity profiles and values changed significantly with HMT, resulting in higher pasting temperatures, decrease of viscosity values and no breakdown, i.e., stability at high temperatures and shear rates. Changes in pasting properties appeared to be more significant for PC and SP starch, whereas the changes for G starch were small. Setback was minimized following HMT in SP and G starches.     

Resistant starch and thermal,morphological and textural properties of heat‐moisture treated rice starches with high‐, medium‐ and low‐amylose content

This study investigated the effects of heat‐moisture treatment (HMT) on the resistant starch content and thermal, morphological, and textural properties of rice starches with high‐, medium‐ and low‐amylose content. The starches were adjusted to 15, 20 and 25% moisture levels and heated at 110°C for 1 h. The HMT increased the resistant starch content in all of the rice starches. HMT increased the onset temperature and the gelatinisation temperature range (T_finish–T_onset) and decreased the enthalpy of gelatinisation of rice starches with different amylose contents. This reduction increased with the increase in the moisture content of HMT. The morphology of rice starch granules was altered with the HMT; the granules presented more agglomerated surface. The HMT affected the textural parameters of rice starches; the high‐ and low‐amylose rice starches subjected to 15 and 20% HMT possessed higher gel hardness.     

Influence of moisture content on the degradation of waxy and normal corn starches acid-treated in methanol

Waxy and normal corn starches with different moisture contents, 5.1-16.9% and 4.8-15.9%, respectively, were prepared and treated in methanol containing 0.36% HCl at 45 °C for 1 h. Recovery of all the treated starches was found to be above 90%. Peak viscosity, gelatinization temperature and enthalpy change of gelatinization of waxy and normal corn starches decreased after treatment and this decrement was found to be more in treated starches having lower initial moisture content. The weight-average degree of polymerization and chain length (CL) of waxy and normal corn starches decreased upon acid-methanol treatment. The decrement ratio of molecular weight of modified starches was found to be negatively correlated with the initial moisture content of the starches. The decrement ratio of normal corn starch was higher than waxy corn starch with similar moisture content of starch. The content and CL of long chain fraction of amylopectin for waxy corn starch slightly decreased after treatment, while no obvious trend was found among starches with different moisture contents. CL of amylose for acid-methanol-treated normal corn starch decreased and this change was found to be higher in starches with lower initial moisture contents. Results demonstrated that the initial moisture content of starch granules strongly influenced the functional properties and degradation of starch treated by acid in methanol.     

Paste viscosity of rice starches of different amylose content and carboxymethylcellulose formed by dry heating and the physical properties of their films

Starch modified by combination with sodium carboxymethylcellulose (CMC) has been reported to have improved film properties. In this study, rice starches with different amylose content were heat-treated in a dry state after being impregnated with low or medium-viscosity CMC. Noticeable change was found in pasting properties of the starches after dry heat treatment with CMC. It indicated that crosslinkage occurred between the starch and CMC. The waxy starch showed significant change in viscosity throughout pasting after dry heating with CMC, suggesting that the ester bonds were mostly formed between the hydroxyl groups in amylopectin branches of rice starch and carboxylate acid groups of CMC. Particle size also increased after heat treatment with CMC. The modified starch-based films showed improvement in the tensile strength. Both water vapor and oxygen permeability reduced for the modified starch-based films. Dynamic mechanical analysis (DMA) study showed that the values of G′ of modified starch-based film were higher than those of native starch-based film over the temperature range −40 to 60 °C. The heating process with CMC could be used as a modification method for starch and provide desirable properties of starch-based films.     

韧化处理对不同玉米淀粉理化特性的影响

以不同直/支链比例的普通玉米淀粉和蜡质玉米淀粉为材料,在40、50、60℃进行韧化处理,研究韧化处理对玉米淀粉理化特性的影响。结果表明：韧化处理的两种玉米淀粉颗粒形貌有较小变化。韧化处理后,两种淀粉的溶解度和膨胀度随着处理温度的升高而降低;所有韧化处理过的玉米淀粉黏度低于原淀粉,起糊温度高于原淀粉;韧化处理后淀粉的糊化温度升高,热焓变化不大。     

韧化处理对板栗淀粉特性的影响

以燕山板栗淀粉为材料,在30、40和50℃分别进行韧化处理。采用扫描电子显微镜(SEM)、X-射线衍射分析(XRD)、差示扫描量热分析(DSC)及体外消化法等方法,研究了韧化处理对板栗淀粉颗粒结构、理化特性和体外消化性的影响。研究表明:与原淀粉相比,韧化处理后2种板栗淀粉的直链淀粉含量降低,淀粉颗粒破损率增大,但淀粉仍为C型晶体。随着韧化温度的升高,淀粉颗粒表面出现凹坑和损伤越显著,膨胀度随着处理温度的升高而降低。DSC分析表明,韧化处理使淀粉的糊化温度升高,热焓变化不大。不同的韧化处理温度对板栗淀粉体外消化性有不同的影响,韧化处理使淀粉的快消化淀粉(RDS)含量减少,慢消化淀粉(SDS)含量增大。