Applications of poly(ethylene oxide) in controlled release tablet systems: a review

To improve therapeutic effects and compatibility of patients, controlled release tablet systems based on polymers are of great interest for pharmaceutical technologies. Poly(ethylene oxide) (PEO) is a non-ionic linear hydrophilic and uncrosslinked polymer available in a number of molecular weights. It is synthesized by ethylene oxide and has many desirable properties for drug delivery applications. This review article aims to summary the recent developments on physicochemical properties of PEO and focus on the recent efforts and developments on PEO as oral controlled release matrix tablets, bioadhesive hydrophilic matrices and osmotic pump tablets. Commercial products employed PEO were also discussed.     

Oral sustained delivery of theophylline and cimetidine from in situ gelling pectin formulations in rabbits

The aim of this study was to evaluate the potential of an in situ gelling pectin formulation as a vehicle for the oral sustained delivery of theophylline and cimetidine. In vitro studies demonstrated diffusion-controlled release of theophylline from 1, 1.5, and 2% w/v pectin gels. Release of this drug from 1.5% w/v pectin gels formed in situ in rabbit stomach was sustained over a period of 12 hours giving a theophylline bioavailability some seven fold higher than when administered from a commercial syrup. In contrast, interactions between cimetidine and pectin led to weak gelation of the pectin sols that prevented any meaningful determination of in vitro release characteristics. Similarly, in vivo release profiles from pectin formulations containing cimetidine were similar to that from a solution of this drug in buffer, indicative of weak gelation. Examination of the content of the rabbit stomach 5 hours after administration of 1.5% w/v pectin sols containing drug confirmed gel formation, but gels containing cimetidine were noticeably softer than those containing theophylline.     

In Situ Gelling Pectin Formulations for Oral Sustained Delivery of Paracetamol

The purpose of this study was to evaluate the potential of a pectin formulation with in situ gelling properties for the oral sustained delivery of paracetamol (acetaminophen). The formulations consisted of dilute aqueous solutions (1% to 2% w/v) of low methoxy pectin containing calcium ions in complexed form, which on release in the acidic environment of the stomach caused gelation of the pectin. In vitro studies demonstrated diffusion‐controlled release of paracetamol from the gels over a period of 6 h. A bioavailability of approximately 96% of that of a paracetamol solution could be achieved from gels containing an identical dose of drug formed in situ in the stomachs of rats, with appreciably lower peak plasma levels and a sustained release of drug over a period of at least 6 h.     

In situ gelling pectin formulations for oral sustained delivery of paracetamol

The purpose of this study was to evaluate the potential of a pectin formulation with in situ gelling properties for the oral sustained delivery of paracetamol (acetaminophen). The formulations consisted of dilute aqueous solutions (1% to 2% w/v) of low methoxy pectin containing calcium ions in complexed form, which on release in the acidic environment of the stomach caused gelation of the pectin. In vitro studies demonstrated diffusion-controlled release of paracetamol from the gels over a period of 6 h. A bioavailability of approximately 96% of that of a paracetamol solution could be achieved from gels containing an identical dose of drug formed in situ in the stomachs of rats, with appreciably lower peak plasma levels and a sustained release of drug over a period of at least 6 h.     

Oral Sustained Delivery of Theophylline and Cimetidine from In Situ Gelling Pectin Formulations in Rabbits

ABSTRACT

The aim of this study was to evaluate the potential of an in situ gelling pectin formulation as a vehicle for the oral sustained delivery of theophylline and cimetidine. In vitro studies demonstrated diffusion-controlled release of theophylline from 1, 1.5, and 2% w/v pectin gels. Release of this drug from 1.5% w/v pectin gels formed in situ in rabbit stomach was sustained over a period of 12 hours giving a theophylline bioavailability some seven fold higher than when administered from a commercial syrup. In contrast, interactions between cimetidine and pectin led to weak gelation of the pectin sols that prevented any meaningful determination of in vitro release characteristics. Similarly, in vivo release profiles from pectin formulations containing cimetidine were similar to that from a solution of this drug in buffer, indicative of weak gelation. Examination of the content of the rabbit stomach 5 hours after administration of 1.5% w/v pectin sols containing drug confirmed gel formation, but gels containing cimetidine were noticeably softer than those containing theophylline.     

Kinetic Release of Theophylline from Hydrophilic Swellable Matrices

The objective of this research was to evaluate the effect of hydroxypropylmethylcellulose (HPMC; Methocel K4M Premium) level and type of excipient on theophylline release and to attempt to predict the drug release from hydrophilic swellable matrices. Formulations containing theophylline anhydrous (10% w/w), Methocel K4M Premium (10%, 30%, and 40% w/w), different diluents (Lactose Fast Flo, Avicel PH-101, and Emcompress), and magnesium stearate (0.75% w/w) were prepared by direct compression at a target weight of 450 mg ± 5% and target hardness of 7 kp to 10 kp. It was found that, as the percentage of polymer in all formulations increased from 10% to 30% or 40%, the drug release decreased. However, there was no significant difference in drug release between formulations containing 30% polymer and formulations containing 40% polymer. At low levels of polymer, the drug release is controlled by the type of diluent used. Avicel PH-101 formulation gave the highest release, while its corresponding Emcompress formulation gave the lowest release. Formulations containing 30% or 40% polymer gave the same release profiles irrespective of the type of diluent used. In all cases, replacement of a portion of Methocel K4M Premium with any diluent resulted in increase of theophylline release. In addition, this investigation demonstrated that the drug release from hydrophilic swellable matrices can be predicted using only a minimum number of experiments.     

Evaluation of monolithic osmotic tablet system for nifedipine delivery in vitro and in vivo

The aim of this study was to evaluate the monolithic osmotic tablet system (MOTS) containing a solid dispersion with the practically water-insoluble drug nifedipine in vitro and in vivo. In the drug release study in vitro, the release profiles of this system had almost zero-order kinetics. The influences of tablet formulation variables, sizes of the delivery orifice, membrane variables, and values of pH in the dissolution medium on nifedipine release from MOTS have been investigated. The results provided evidence that the tablet core played an important role in MOTS. While orifice sizes and membrane variables affected the nifedipine release rate, MOTS was independent of the dissolution medium. The appropriate orifice size was found to be in the range of 0.5-1.0 mm. The coating membrane incorporating hydrophilic polyethylene glycol (PEG) formed a porous structure. The human pharmacokinetics and relative bioavailability of MOTS containing nifedipine were compared with a commercial Adalat® osmotic tablet system containing an equivalent dose of nifedipine following an oral single dose of 30 mg given to each of 11 healthy volunteers in an open, randomized crossover study in vivo. The relative bioavailability for MOTS was 112%. There was no statistically significant difference in the pharmacokinetic parameters between two dosage forms. It is concluded that the monolithic osmotic tablet controlled release system is feasible for a long-acting preparation as a once-daily treatment.     

Kinetic Release of Theophylline from Hydrophilic Swellable Matrices

The objective of this research was to evaluate the effect of hydroxypropylmethylcellulose (HPMC; Methocel K4M Premium) level and type of excipient on theophylline release and to attempt to predict the drug release from hydrophilic swellable matrices. Formulations containing theophylline anhydrous (10% w/w), Methocel K4M Premium (10%, 30%, and 40% w/w), different diluents (Lactose Fast Flo, Avicel PH-101, and Emcompress), and magnesium stearate (0.75% w/w) were prepared by direct compression at a target weight of 450 mg ± 5% and target hardness of 7 kp to 10 kp. It was found that, as the percentage of polymer in all formulations increased from 10% to 30% or 40%, the drug release decreased. However, there was no significant difference in drug release between formulations containing 30% polymer and formulations containing 40% polymer. At low levels of polymer, the drug release is controlled by the type of diluent used. Avicel PH-101 formulation gave the highest release, while its corresponding Emcompress formulation gave the lowest release. Formulations containing 30% or 40% polymer gave the same release profiles irrespective of the type of diluent used. In all cases, replacement of a portion of Methocel K4M Premium with any diluent resulted in increase of theophylline release. In addition, this investigation demonstrated that the drug release from hydrophilic swellable matrices can be predicted using only a minimum number of experiments.     

Evaluation of Monolithic Osmotic Tablet System for Nifedipine Delivery In Vitro and In Vivo

Abstract

The aim of this study was to evaluate the monolithic osmotic tablet system (MOTS) containing a solid dispersion with the practically water-insoluble drug nifedipine in vitro and in vivo. In the drug release study in vitro, the release profiles of this system had almost zero-order kinetics. The influences of tablet formulation variables, sizes of the delivery orifice, membrane variables, and values of pH in the dissolution medium on nifedipine release from MOTS have been investigated. The results provided evidence that the tablet core played an important role in MOTS. While orifice sizes and membrane variables affected the nifedipine release rate, MOTS was independent of the dissolution medium. The appropriate orifice size was found to be in the range of 0.5–1.0 mm. The coating membrane incorporating hydrophilic polyethylene glycol (PEG) formed a porous structure. The human pharmacokinetics and relative bioavailability of MOTS containing nifedipine were compared with a commercial Adalat® osmotic tablet system containing an equivalent dose of nifedipine following an oral single dose of 30 mg given to each of 11 healthy volunteers in an open, randomized crossover study in vivo. The relative bioavailability for MOTS was 112%. There was no statistically significant difference in the pharmacokinetic parameters between two dosage forms. It is concluded that the monolithic osmotic tablet controlled release system is feasible for a long-acting preparation as a once-daily treatment.     

Enhanced Oral Bioavailability of a Poorly Water Soluble Drug PNU‐91325 by Supersaturatable Formulations

Supersaturatable cosolvent (S‐cosolvent) and supersaturatable self‐emulsifying drug delivery systems (S‐SEDDS) are designed to incorporate water soluble cellulosic polymers such as hydroxypropyl methylcellulose (HPMC), which may inhibit or retard drug precipitation in vivo. A poorly soluble drug, PNU‐91325, was used as a model drug in this study to illustrate this formulation approach. The comparative in vitro studies indicated that the presence of a small amount HPMC in the formulation was critical to achieve a stabilized supersaturated state of PNU‐91325 upon mixing with water. An in vivo study was conducted in dogs for assessment of the oral bioavailability of four formulations of PNU‐91325. A five‐fold higher bioavailability (～ 60%) was observed from a S‐cosolvent formulation containing propylene glycol (PG) + 20 mg/g HPMC as compared to that (～ 12%) of a neat polyethylene glycol (PEG) 400 formulation. The low bioavailability of the PEG 400 formulation is attributed to the uncontrolled precipitation of PNU‐91325 upon dosing, a commonly observed phenomenon with the cosolvent approach. A S‐SEDDS formulation composed of 30% w/w Cremophor (surfactant), 9% PEG 400, 5% DMA, 18% Pluronic L44, 20% HPMC, and other minor components showed an oral bioavailability of ～ 76%, comparable to that of a neat tween formulation (bioavailability: ～ 68%). The significant improvement of the oral bioavailability of the supersaturatable S‐cosolvent and S‐SEDDS formulations is attributed to a high free drug concentration in vivo as a result of the generation and stabilization of the supersaturated state due to the incorporation of polymeric precipitation inhibitor.     

Enhanced oral bioavailability of a poorly water soluble drug PNU-91325 by supersaturatable formulations

Supersaturatable cosolvent (S-cosolvent) and supersaturatable self-emulsifying drug delivery systems (S-SEDDS) are designed to incorporate water soluble cellulosic polymers such as hydroxypropyl methylcellulose (HPMC), which may inhibit or retard drug precipitation in vivo. A poorly soluble drug, PNU-91325, was used as a model drug in this study to illustrate this formulation approach. The comparative in vitro studies indicated that the presence of a small amount HPMC in the formulation was critical to achieve a stabilized supersaturated state of PNU-91325 upon mixing with water. An in vivo study was conducted in dogs for assessment of the oral bioavailability of four formulations of PNU-91325. A five-fold higher bioavailability (∼ 60%) was observed from a S-cosolvent formulation containing propylene glycol (PG) + 20 mg/g HPMC as compared to that (∼ 12%) of a neat polyethylene glycol (PEG) 400 formulation. The low bioavailability of the PEG 400 formulation is attributed to the uncontrolled precipitation of PNU-91325 upon dosing, a commonly observed phenomenon with the cosolvent approach. A S-SEDDS formulation composed of 30% w/w Cremophor (surfactant), 9% PEG 400, 5% DMA, 18% Pluronic L44, 20% HPMC, and other minor components showed an oral bioavailability of ∼ 76%, comparable to that of a neat tween formulation (bioavailability: ∼ 68%). The significant improvement of the oral bioavailability of the supersaturatable S-cosolvent and S-SEDDS formulations is attributed to a high free drug concentration in vivo as a result of the generation and stabilization of the supersaturated state due to the incorporation of polymeric precipitation inhibitor.     

Release of diltiazem hydrochloride from hydrophilic matrices of polyethylene oxide and carbopol

The mucoadhesion, swelling, and drug release behavior of polyethylene oxide (PEO) and carbopol (CP) matrices were studied using a water soluble model drug diltiazem hydrochloride. The mucoadhesive strength of the matrices increased with increase in polymer content. The results showed that PEO was more mucoadhesive than CP. Mucoadhesion of the tablets was dependent upon the swelling. Swelling was ascertained by measuring the axial and radial expansion of matrix tablets following exposure to media of physiological ionic strength. There was a marked increase in the swelling index of matrices containing high polymer content of PEO as compared to CP. Drug release kinetics were found to be closely related to dissolution and swelling properties of the matrices. The release was found to be non-fickian with n (release exponent) values ranging from 0.45-0.58. At a constant polymer content (15.84% w/w), the main contributing factor for the mucoadhesion, swelling, and release was the amount of PEO.     

Preparation and bioavailability of sustained-release doxofylline pellets in beagle dogs

The objective of this study was to develop doxofylline-loaded sustained-release pellets coated with Eudragit NE30D alone (F1) or blend of Eudragit RL30D/RS30D (F2) and further evaluate their in vitro release and in vivo absorption in beagle dogs. Doxofylline-loaded cores with a drug loading of 70% (w/w) were prepared by layering drug-MCC powder onto seed cores in a centrifugal granulator and then coating them with different kinds of polymethacrylates in a bottom-spray fluidized bed coater. Dissolution behaviour of these formulations was studied in vitro under various pH conditions (from pH 1.2 to pH 7.4) to evaluate the effect of pH on drug release profiles. It was found that F2 produced a better release profile than F1 did and two different release mechanisms were assumed for F1 and F2, respectively. The relative bioavailability of the sustained-release pellets was studied in six beagle dogs after oral administration in a fast state using a commercially available immediate release tablet as a reference. Coated with Eudragit NE30D and a blend of Eudragit RL30D/RS30D (1:12), at 5% and 8% coating level, respectively, the pellets acquired perfect sustained-release properties and good relative bioavailability, with small fluctuation of drug concentration in plasma. But combined use of mixed Eudragit RL30D/RS30D polymers with proper features as coating materials produced a longer T(max), a lower C(max) and a little higher bioavailability compared to F1 (coated with Eudragit NE30D alone). The C(max), T(max) and relative bioavailability of F1 and F2 coated pellets were 15.16 microg/ml, 4.17 h, 97.69% and 11.41 microg/ml, 5 h, 101.59%, respectively. Also a good linear correlation between in vivo absorption and in vitro release was established for F1 and F2, so from the dissolution test, formulations in vivo absorption can be properly predicted.     

Preparation and Bioavailability of Sustained-Release Doxofylline Pellets in Beagle Dogs

The objective of this study was to develop doxofylline-loaded sustained-release pellets coated with Eudragit® NE30D alone (F1) or blend of Eudragit® RL30D/RS30D (F2) and further evaluate their in vitro release and in vivo absorption in beagle dogs. Doxofylline-loaded cores with a drug loading of 70% (w/w) were prepared by layering drug-MCC powder onto seed cores in a centrifugal granulator and then coating them with different kinds of polymethacrylates in a bottom-spray fluidized bed coater. Dissolution behaviour of these formulations was studied in vitro under various pH conditions (from pH 1.2 to pH 7.4) to evaluate the effect of pH on drug release profiles. It was found that F2 produced a better release profile than F1 did and two different release mechanisms were assumed for F1 and F2, respectively. The relative bioavailability of the sustained-release pellets was studied in six beagle dogs after oral administration in a fast state using a commercially available immediate release tablet as a reference. Coated with Eudragit® NE30D and a blend of Eudragit® RL30D/RS30D (1:12), at 5% and 8% coating level, respectively, the pellets acquired perfect sustained-release properties and good relative bioavailability, with small fluctuation of drug concentration in plasma. But combined use of mixed Eudragit® RL30D/RS30D polymers with proper features as coating materials produced a longer T_max, a lower C_max and a little higher bioavailability compared to F1 (coated with Eudragit® NE30D alone). The C_max, T_max and relative bioavailability of F1 and F2 coated pellets were 15.16 μg/ml, 4.17 h, 97.69% and 11.41 μg/ml, 5 h, 101.59%, respectively. Also a good linear correlation between in vivo absorption and in vitro release was established for F1 and F2, so from the dissolution test, formulations in vivo absorption can be properly predicted.     

Development of self-microemulsifying drug delivery system for oral bioavailability enhancement of berberine hydrochloride

The purpose of this study was to develop a self-microemulsifying drug delivery system (SMEDDS) to improve the oral bioavailability of Berberine hydrochloride (BBH), an important bioactive compound from Chinese Medicines with poor water solubility. Pseudoternary phase diagrams were constructed using oil, surfactant and co-surfactant types to identify the efficient self-microemulsification region. SMEDDS was characterized by morphological observation, droplet size, zeta-potential determination, stability, in vitro release and in vivo bioavailability study. The optimal formulation with the best self-microemulsifying and solubilization ability consisted of 40% (w/w) of ethyl linoleate and oleic acid (2:1), 35% (w/w) Tween-80 and 25% (w/w) glycerol. The SMEDDS of BBH could exhibit good stability. In vitro release test showed a complete release of BBH from SMEDDS was in 5 h. In vivo results indicated that the peak plasma concentration (C_max) and the area under the curve (AUC_{0→12 h}) of SMEDDS of BBH were higher than the commercial tablet by 163.4% and 154.2%, respectively. The relative bioavailability of SMEDDS of BBH was enhanced about 2.42-fold compared with the commercial tablet in rats. The study confirmed that the SMEDDS formulation could be used as a possible alternative to traditional oral formulations of BBH to improve its bioavailability.     

Development and evaluation of nanosized niosomal dispersion for oral delivery of Ganciclovir

Encapsulation of Ganciclovir in lipophilic vesicular structure may be expected to enhance the oral absorption and prolong the existence of the drug in the systemic circulation. So the purpose of the present study was to improve the oral bioavailability of Ganciclovir by preparing nanosized niosomal dispersion. Niosomes were prepared from Span40, Span60, and Cholesterol in the molar ratio of 1:1, 2:1, 3:1, and 3:2 using reverse evaporation method. The developed niosomal dispersions were characterized for entrapment efficiency, size, shape, in vitro drug release, release kinetic study, and in vivo performance. Optimized formulation (NG8; Span60:Cholesterol 3:2 molar ratio) has shown a significantly high encapsulation of Ganciclovir (89±2.13%) with vesicle size of 144±3.47 nm (polydispersity index [PDI]=0.08). The in vitro release study signifies sustained release profile of niosomal dispersions. Release profile of prepared formulations have shown that more than 85.2±0.015% drug was released in 24 h with zero-order release kinetics. The results obtained also revealed that the types of surfactant and Cholesterol content ratio altered the entrapment efficiency, size, and drug release rate from niosomes. In vivo study on rats reveals five-time increment in bioavailability of Ganciclovir after oral administration of optimized formulation (NG8) as compared with tablet. The effective drug concentration (>0.69 μg/mL in plasma) was also maintained for at least 8 h on administration of the niosomal formulation. In conclusion, niosomes can be proposed as a potential oral delivery system for the effective delivery of Ganciclovir.     

Self-microemulsifying drug delivery systems (SMEDDS) for improving in vitro dissolution and oral absorption of Pueraria lobata isoflavone

The aim of our investigation was to develop and characterize self-microemulsifying drug delivery systems (SMEDDS) of Pueraria lobata isoflavone to improve its in vitro dissolution and oral absorption in beagle dogs. SMEDDS consisted of oil (ethyl oleate), a surfactant (Tween 80), and a cosurfactant (Transcutol P). In all the SMEDDS, the level of Pueraria lobata isoflavone was fixed at 20% w/w of the vehicle. The in vitro self-microemulsification properties and droplet size analysis of SMEDDS were studied following their addition to water under mild agitation. A pseudoternary phase diagram was constructed identifying the efficient self-microemulsification region. From these investigations, an optimized formulation was selected and its dissolution and bioavailability were compared with a tablet formulation in beagle dogs. The in vitro dissolution rate of puerarin from SMEDDS was more than threefold faster than that from Yufengningxin tablets (Pueraria lobata isoflavone tablets). A 2.5-fold increase in the relative bioavailability was observed for the SMEDDS compared with Yufengningxin tablets. The absolute bioavailability of the SMEDDS was 82.32 +/- 15.51%, which was significantly improved compared with that of Yufengningxin tablets. These results demonstrate the potential of SMEDDS as an efficient way of improving the oral absorption of Pueraria lobata isoflavone.     

Self-Microemulsifying Drug Delivery Systems (SMEDDS) for Improving In Vitro Dissolution and Oral Absorption of Pueraria Lobata Isoflavone

The aim of our investigation was to develop and characterize self-microemulsifying drug delivery systems (SMEDDS) of Pueraria lobata isoflavone to improve its in vitro dissolution and oral absorption in beagle dogs. SMEDDS consisted of oil (ethyl oleate), a surfactant (Tween 80), and a cosurfactant (Transcutol P). In all the SMEDDS, the level of Pueraria lobata isoflavone was fixed at 20% w/w of the vehicle. The in vitro self-microemulsification properties and droplet size analysis of SMEDDS were studied following their addition to water under mild agitation. A pseudoternary phase diagram was constructed identifying the efficient self-microemulsification region. From these investigations, an optimized formulation was selected and its dissolution and bioavailability were compared with a tablet formulation in beagle dogs. The in vitro dissolution rate of puerarin from SMEDDS was more than threefold faster than that from Yufengningxin tablets (Pueraria lobata isoflavone tablets). A 2.5-fold increase in the relative bioavailability was observed for the SMEDDS compared with Yufengningxin tablets. The absolute bioavailability of the SMEDDS was 82.32 ± 15.51%, which was significantly improved compared with that of Yufengningxin tablets. These results demonstrate the potential of SMEDDS as an efficient way of improving the oral absorption of Pueraria lobata isoflavone.     

Design and evaluation in vitro of controlled release mucoadhesive tablets containing chlorhexidine

This investigation deals with the development of buccal tablets containing chlorhexidine (CHX), a bis-bis-guanide with antimicrobial and antiseptic effects in the oral cavity, and able to adhere to the buccal mucosa to give local controlled release of drug. A mucoadhesive formulation was designed to swell and form a gel adhering to the mucosa and controlling the drug release into the oral cavity.

Some batches of tablets were developed by direct compression, containing different amounts of hydroxypropylmethylcellulose (HPMC) and carbomer; changing the amount ratio of these excipients in formulations, it is possible easily modulate the mucoadhesive effect and release of drug. The in vitro tests were performed using the USP 26/NF paddle apparatus, a specifically developed apparatus, and a modified Franz diffusion cells apparatus. This last method allows a simultaneous study of drug release rate from the tablets and drug permeation through the buccal mucosa.

Similar tests have also been carried out on a commercial product, Corsodyl gel^®, in order to compare the drug release control of gel with respect to that of the mucoadhesive tablet, as a formulation for buccal delivery of CHX. While the commercial formulation does not appear to control the release, the formulation containing 15% w/w methocel behaves the best, ensuring the most rapid and complete release of the drug, together with a negligible absorption of the active agent as required for a local antiseptic action in the oral cavity.     

Self-Microemulsifying Drug Delivery Systems (SMEDDS) for Improving In Vitro Dissolution and Oral Absorption of Pueraria Lobata Isoflavone

The aim of our investigation was to develop and characterize self-microemulsifying drug delivery systems (SMEDDS) of Pueraria lobata isoflavone to improve its in vitro dissolution and oral absorption in beagle dogs. SMEDDS consisted of oil (ethyl oleate), a surfactant (Tween 80), and a cosurfactant (Transcutol P). In all the SMEDDS, the level of Pueraria lobata isoflavone was fixed at 20% w/w of the vehicle. The in vitro self-microemulsification properties and droplet size analysis of SMEDDS were studied following their addition to water under mild agitation. A pseudoternary phase diagram was constructed identifying the efficient self-microemulsification region. From these investigations, an optimized formulation was selected and its dissolution and bioavailability were compared with a tablet formulation in beagle dogs. The in vitro dissolution rate of puerarin from SMEDDS was more than threefold faster than that from Yufengningxin tablets (Pueraria lobata isoflavone tablets). A 2.5-fold increase in the relative bioavailability was observed for the SMEDDS compared with Yufengningxin tablets. The absolute bioavailability of the SMEDDS was 82.32 ± 15.51%, which was significantly improved compared with that of Yufengningxin tablets. These results demonstrate the potential of SMEDDS as an efficient way of improving the oral absorption of Pueraria lobata isoflavone.