Variance components of teat dimensions in dairy cows and associated factors

Traditionally, all cows within a herd are milked with the same teat cup liner, although it is hypothesized that considerable variation in teat dimensions exists between cows and quarters within cows. To study at which level (herd, cow, or quarter) most variation in teat dimensions resides, and to identify factors explaining (part of) this variation, both a cross-sectional (n=2,715) and a longitudinal study (n=8,678) were conducted. Using an objective and easy-to-use measuring device, teat length and teat diameters were determined. In both studies, most variation in teat dimensions was present at the cow or within-cow level, and not at the herd level, indicating that choosing a teat cup liner that is identical for all cows in a herd is far from optimal. Quarter position (front versus hind), parity and lactation stage were identified as factors associated with teat length and teat diameters. Generally, front teats were longer and broader than hind teats. Teat length and diameters increased with parity, although the increase in teat length was not significant from second parity onwards in front teats, based on observations from the longitudinal study. After the first 30 d in milk, teat length substantially and significantly increased, whereas teat diameters decreased. We conclude that better results in teat condition, and eventually in udder health, might be yielded when different teat cup liners are chosen for front versus hind teats or for cows of different parity or lactation stage, with special attention to the first 30 d in milk. However, the biological relevance of these differences should be examined first.     

Teat anatomy and its relationship with quarter and udder milk flow characteristics in dairy cows

Anatomical and functional characteristics of the teat are supposed to have considerable influence on milk flow performance. In the present study, various teat and milking characteristics in 148 quarters of 38 cows were analyzed via 3 different approaches. Teat canal length, teat wall thickness, and teat diameter were measured by ultrasound. In addition, the vacuum needed to open the teat canal (VO) was determined and milk flow profiles were measured in each quarter separately.Rear teats were shorter and thicker than front teats, whereas teat canal length and teat wall thickness did not differ according to quarter position. Milk yield and peak flow rate (PFR) were higher in rear than in front quarters. Teat canal length and VO were negatively correlated with PFR and average flow rate (AFR) but no correlations were observed between milkability traits and externally measurable teat characteristics like teat length or teat diameter.Individual milkability at an udder level is a complex characteristic that is determined by the milkability at a quarter level and the distribution of quarter milk yields. The anatomical and functional characteristics of single teats can partly explain the milk flow characteristics of individual quarters.     

Effects on milk yield of milking interval regularity and teat cup attachment failures with robotic milking systems

A database consisting of 35291 milking records from 83 cows was built over a period of 10 months with the objectives of studying the effect of teat cup attachment failures and milking interval regularity on milk production with an automated milking system (AMS). The database collected records of lactation number, days in milk (DIM), milk production, interval between milkings (for both the entire udder and individual quarters in case of a teat cup attachment failure) and average and peak milk flows for each milking. The weekly coefficient of variation (CV) of milking intervals was used as a measure of milking regularity. DIM, milking intervals, and CV of milking intervals were divided into four categories coinciding with the four quartiles of their respective distributions. The data were analysed by analysis of variance with cow as a random effect and lactation number, DIM, the occurrence of a milking failure, and the intervals between milkings or the weekly CV of milking intervals as fixed effects. The incidence of attachment failures was 7.6% of total milkings. Milk production by quarters affected by a milking failure following the failure was numerically greater owing to the longer interval between milkings. When accounting for the effect of milking intervals, milk production by affected quarters following a milking failure was 26% lower than with regular milkings. However, the decrease in milk production by quarters affected by milking failures was more severe as DIM increased. Average and peak milk flows by quarters affected by a milking failure were lower than when milkings occurred normally. However, milk production recovered its former level within seven milkings following a milking failure. Uneven frequency (weekly CV of milking intervals >27%) decreased daily milk yield, and affected multiparous more negatively than primiparous cows.     

Effect of Teat Stimulation on Sympathetic Tone in Bovine Mammary Gland

Rate of contraction of teat sphincter muscle in cows is partially under sympathetic control. To investigate the effect of teat stimulation on sympathetic tone in the mammary gland, rates of spontaneous rhythmic contractions of teat sphincter muscle were measured prior to and during eight machine milkings by pressure transponding devices. Transponding devices were inserted into right front and right rear teat ducts. After a 5-min control, the udder was prepped for 1.5-min, the right front transponder was removed, and then the left front, left rear, and right front quarters were milked while contractile frequency of the right rear sphincter muscle continued to be monitored.During the control period, teat sphincter muscles contracted with a nominal frequency of from two to four per min. Rhythmic contraction of the teat sphincter muscle decreased by about one per min during manual stimulation of the udder. Toward the end of milking, rates reached a low, and in half of the trials there were no contractions. After milking, with teats no longer stimulated, contractile frequency rose towards baseline in the unmilked right rear quarters. This decrease in rate of contraction is likely from a decrease in sympathetic tone in the mammary gland resulting from an autonomic reflex to teat stimulation.     

Influence of static and dynamic teat characteristics and milking time on udder health in Norwegian Red Cattle

A field survey with 70 cows in 15 herds was carried out to find a possible correlation between the depth of teat penetration into the teatcup liner during milking, and udder health. The investigation showed that the depth of penetration into the liner of fore teats was positively correlated with the fore teat end hardness (P less than 0.01), and with the frequency of clinical mastitis for the whole udder (P less than 0.1). The investigation also showed that the teat end height above the floor was negatively correlated with mean cell count for the previous year (P less than 0.001), and with the presence of subclinical mastitis in rear quarters (P less than 0.05).     

Cow-related risk factors for milk leakage

Milk leakage in dairy cows is a symptom of impaired teat sphincter function. Milk leakage is related to an increased risk of mastitis in heifers and cows, and causes hygiene problems. The aim of our study was to assess whether teat shape, condition of teat orifice, and peak milk flow rate are risk factors for milk leakage. We conducted a longitudinal observational study in 15 German dairy farms in which cows were maintained in loose housing. The farms were visited monthly at 2 consecutive milkings. During the evening milking, milk flow curves were measured with the LactoCorder. Milk leakage was recorded during the subsequent morning milking, when cows entered the milking parlor. Immediately after detachment of the milking cluster, teat shape, teat end shape, and condition of the teat orifice of cows were assessed between 9 and 100 d in milk (DIM) and during late lactation (>250 DIM). Data from 1600 cows were analyzed. Milk leakage was treated as the binary response variable in a logistic regression model with herd as a random effect. Primiparous cows with high peak milk flow and teat canal protrusion were at greater risk of milk leakage. High peak milk flow rate, short teats, teat canal protrusion, inverted teat ends, and early lactation increased the risk of milk leakage in multiparous cows. Random herd effects accounted for only 10% of the total variation, indicating that the impact of management or other herd-level factors on the occurrence of milk leakage is virtually negligible for practical purposes.     

Effect of milking without pulsation on teat duct colonization with Streptococcus agalactiae and penetrability to endotoxin.

Forty quarters of 10 cows were milked for a 9-d period with one of four treatments: 1) no liner pulsation, 2) conventional milking, 3) no pulsation for 4 d followed by conventional milking for 5 d, and 4) conventional milking for 4 d followed by milking without pulsation for 5 d. All teat orifices were inoculated with approximately .5 million cfu of Streptococcus agalactiae and Streptococcus dysgalactiae on d 1 and 5. Recoveries of Strep. agalactiae from the teat end were increased for teats milked without pulsation. Recoveries of Strep. dysgalactiae were lower than those of Strep. agalactiae and not increased by milking without pulsation. In a second experiment, teats of 20 cows were milked for a 15-d period with or without liner pulsation. For 10 successive milkings, all teats were inoculated with 1.0 micrograms of Escherichia coli endotoxin either immediately or 2.5 h after each milking. The frequency of endotoxin penetration, measured by the Wisconsin Mastitis Test, in pulsated quarters and in nonpulsated quarters was similar. For quarters milked without pulsation but not for pulsated quarters, inoculation of endotoxin immediately after milking led to greater incidence of teat duct penetration than for inoculation 2.5 h after milking.     

Effects of an automatic postmilking teat dipping system on new intramammary infections and iodine in milk

A technology of automatically applying a postmilking teat dip via the milking machine prior to machine detachment was compared to manual postmilking teat dipping with a teat dip cup for effects on new IMI and iodine content in milk. One hundred twenty Holstein cows were experimentally challenged in a 22-wk trial with Streptococcus agalactiae and Staphylococcus aureus and 148 Holstein cows were experimentally challenged with Streptococcus uberis in another 22-wk trial. The bacterial suspensions were applied to teats of all of the cows after premilking udder preparation and immediately prior to milking machine attachment. In both trials, cows were divided among four treatments: no postmilking teat dipping; manual postmilking teat dipping with a proven efficacious iodophor teat dip; manual postmilking teat dipping with an iodophor teat dip formulated for an automatic postmilking teat dipping system; and automatically postmilking teat dipping via milking machines with an iodophor teat dip formulated for the automatic postmilking teat dipping system. The postmilking teat dipping treatments reduced new Staph. aureus IMI by 64.5, 76.5, and 88.2%; new Strep. agalactiae IMI by 61.5, 77.8, and 94.4%; and new Strep. uberis IMI by 63.5, 82.5, and 93.8%, respectively, against the treatment of no postmilking teat dipping. The treatment applying the postmilking teat dip automatically via milking machines had the lowest number of new IMI caused by the three pathogens. Teat end and teat skin condition were characterized as normal at the end of the study with no differences between treatments. There were no differences with regard to iodine content in milk between treatments.     

Effects of teatcup liner tension on teat canal keratin and teat condition in cows

The effect of tension of teatcup liners on teat end condition and quantity of keratin in the teat canal was investigated. Liner tension was increased by using longer teatcup shells. The first experiment used six Holstein cows in early lactation. Left quarters were milked with liners under medium or normal tension by using Conewango liners in 142 mm shells. Right quarters were milked with liners under high tension by mounting the liners in teatcup shells 149 mm in length. By day 16 teat end condition and sensitivity to manipulation were worsened by thrice daily milking when liners were under a higher tension. Two subsequent experiments each used 12 different Holstein cows. These cows were in mid lactation and were milked twice daily for 10 or 30 d. Left quarters were milked with liners under high tension Right quarters were milked with liners under low tension by using teatcup shells 126 mm in length. The quantity of keratin removed during milking was not influenced by liner tension: however, the quantity of keratin at the end of the experiments was increased 10-20% in teats that were milked using liners under higher tension. Histological analysis and keratin content were consistent with epithelial hyperplasia induced by milking with liners under increased tension.     

Investigations on milk flow and milk yield from teats with milk flow disorders

The objective of this study was to investigate peak milk flow, average milk flow, and milk yield in teats with milk flow disorders. A total of 100 hard milking teats were studied in 97 cows. Teats with milk flow disorders were examined endoscopically. Quarter milk flow and quarter milk yield were examined with four Lactocorders attached to a quarter milking machine. Peak milk flow, average milk flow, and milk yield were measured in all teats of the udder before treatment of the affected teat, as well as 1 and 6 mo later. Teats with milk flow disorders were compared to all other teats of the same udder. Before treatment, peak milk flow from affected teats was 20%, average milk flow 14%, and milk yield 53% of the control teats, adjusted for other significant explanatory variables. Milk flow and milk yield increased after surgical treatment of the affected teats. Six months after treatment peak milk flow was 79%, average milk flow 76%, milk yield was 71% compared with control teats. We conclude from these findings that teat endoscopy and measuring quarter milk flow and milk yield with Lactocorders are useful tools for examining teats with milk flow disorders.     

Sources of variation in milk flow characteristics at udder and quarter levels

The aim of this study was to describe and analyze effects of parity, stage of lactation, milkability (3 groups of cows with differing peak flow rates), time of milking, and quarter position on milk production and milk flow measures at udder and quarter levels. Particular emphasis was put on changes to the decline phase and in duration of overmilking. More than 75,800 quarter milk flow curves and more than 19,300 udder milk flow curves obtained from 38 cows throughout lactation were analyzed. Stage of lactation significantly influenced all studied variables at both udder and quarter levels. At the quarter level, the duration of decline phase and the decline ratio (decline phase as a percentage of milking time) decreased from mo 1 to 2 and then gradually increased as lactation advanced. In contrast, at the udder level, duration of decline phase decreased throughout lactation but beginning at mo 2, the decline ratio increased as lactation advanced. The duration of the overmilking phase of quarters increased from mo 1 to 3 and then decreased in the course of lactation. Parity did not influence peak and average flow rates, the duration of increase phase, or the decline ratio at either udder or quarter levels. All milk flow measures were higher during morning milking except the duration of increase and decline phases at the quarter level and the duration of increase phase at the udder level. Milk yield and the duration of increase phase were not affected by milkability at either level. Quarters from udders with high milkability had longest duration of decline phase and the shortest overmilking phase. Milkability did not influence duration of the decline phase at the udder level. Quarter position influenced all measured variables of milk yield and milk flow. Rear quarters had significantly higher milk yield, longer time of milking, higher peak, and higher average flow rates than front quarters. Front quarters had shorter duration of increase and decline phases than rear quarters. The duration of the overmilking phase was almost double for front quarters. There were also differences in measured flow rates between left or right quarters on respective front or rear positions. Measured characteristics reported in this study may be important in setting default parameters in automated milking systems.     

Technical note: Effects of attachment of hind teats before cleaning and attachment of front teats on milking characteristics in automatic milking systems

Milking characteristics differ between the 4 quarters of a dairy cow udder. In particular, milking time is mostly prolonged in hind quarters compared with front quarters because of the usually higher amount of stored milk. The standard milking routine (STDMR) in both conventional and automatic milking systems (AMS) consists of teat preparation of all 4 quarters, followed by attachment of the 4 teat cups, regardless of the distribution of milk between quarters. In the current study, an alternative teat preparation and milking routine (ALTMR) in AMS was tested, which consisted of cleaning and starting the milking of hind teats before cleaning and attachment of front teats. The hypothesis was based on the fact that hind quarters have usually a longer milking time than front quarters. Starting the milking of hind quarters while the front teats are being cleaned may reduce the difference in the end of milking between front and hind quarters and thus reduce total milking time. Both routines were tested on 5 Swedish dairy farms equipped with AMS in a 4-wk experiment in which treatments were alternated weekly. Total milk yield did not differ between treatments. Machine-on time (MOT) was longer in ALTMR than in STDMR because the difference in milking time between hind and front quarters was less than the time needed to prepare the front teats. However, the longer MOT in ALTMR was compensated by a shorter total preparation time, including the attachment of the first teat cup, as only the hind teats (instead of all 4 teats) were cleaned before milking was started. This resulted in a similar total milking time from start of cleaning of the first quarter until the end of milking of the last quarter in both treatments. Because of the prolonged MOT, average milk flow rate was lower in ALTMR than STDMR. Peak flow rate was higher in ALTMR than STDMR, but only in teat cups 1 (first attached, hind quarter) and 3 (third attached, front quarter), whereas main milk flow was higher in ALTMR than STDMR in both front quarters. In conclusion, splitting teat cleaning and the start of milking between hind and front quarters does not prolong total milking time, including teat cleaning. The partially positive effect on peak and main milk flow indicates that the ALTMR is a suitable milking routine in AMS. In herds with a greater difference of milk stored in hind compared with front quarters, a reduced total milking time can be expected for ALTMR.     

Prospective cohort study of the relationship between milking machine liner slip,milking performance,and cow characteristics

We conducted a prospective cohort study to investigate the associations of machine milking liner slip with (1) milking performance and (2) cow characteristics. Parlor data including milk flow characteristics and data on the occurrence of milking machine liner slips from a 4,000-cow dairy with a thrice-daily milking schedule were obtained with electronic on-farm milk meters over a 2-mo period. We analyzed data from a total of 686,330 milking observations. A multivariable general linear mixed model revealed no association between liner slip and milking unit on time. Least squares means (95% confidence intervals, 95% CI) were 237 (235–238) s for milking observations with and without a liner slip. We observed statistically significant differences in average milk flow rate; however, these were biologically irrelevant. Least squares means were 3.40 (3.37–3.42) kg/min for a milking observation with and 3.42 (3.40–3.44) kg/min without a liner slip. A multivariable generalized linear mixed model showed an association between liner slip and cow characteristics. Compared with late-lactation cows, the odds ratios (OR, 95% CI) of occurrence of a liner slip were 2.03 (1.59–2.59) in early lactation cows and 1.26 (0.97–1.64) in cows from 101 to 200 days in milk. Presence of a nonlactating quarter increased the odds of liner slip occurrence [OR, 95% CI: 10.35 (8.02–13.35)]. Bimodal milking observations had higher odds of occurrence of a liner slip compared with milking observations with a unimodal milk flow curve [OR, 95% CI: 1.05 (1.005–1.09)]. A 1-kg increase in 2-min milk yield increased the odds of a liner slip [OR, 95% CI: 1.26 (1.25–1.28)]. We conclude that, in the study cohort presented herein, the negative effect of liner slips on milking performance can be diminished. The identified cow characteristics could offer unique opportunities to identify and manage cows at increased risk of liner slips.     

Association of anatomical characteristics of teats with quarter-level somatic cell count

Mastitis occurs after bacteria successfully traverse the teat orifice and cause an intramammary infection. Anatomical characteristics of the teat are potential risk factors for infection. The objective of this study was to identify potential associations between anatomical characteristics of teats and quarter-level somatic cell count (QSCC) from cows on larger dairy farms in Wisconsin. Teat dimensions (length and diameter at the teat barrel and apex) were measured, and hyperkeratosis scores were assessed for 3,713 quarters of 959 cows on 9 dairy farms. The SCC of quarter milk samples obtained from those teats was determined. Multivariate models were used to determine associations of teat anatomical characteristics with QSCC. Subclinical mastitis was defined as a quarter milk sample with SCC of >150,000 cells/mL. Teat dimensions and milk components varied among farms. In the group of farms enrolled in this study, prevalence of subclinical mastitis in mammary gland quarters ranged from 13.6 to 28.9%. An interaction of teat apex diameter and quarter position (front or rear) was identified for QSCC. For both front and rear quarters, a tendency existed for narrower teat barrels to be associated with increased QSCC. However, for front quarters only, greater diameter of the teat apex was associated with increased QSCC. Teat shape (square or triangular teats) was not associated with QSCC. Milk samples obtained from teats with hyperkeratosis scores of very rough had greater QSCC compared with milk samples obtained from teats with hyperkeratosis scores of normal, smooth ring, or rough ring.     

Increased teat wall thickness in response to machine milking

Transiently increased teat wall thickness in response to machine milking has been documented by various methods, including ultrasound. However, correlative ultrasonography and histology to detect the origin of this phenomenon is lacking. The first goal of the present study was to evaluate and compare milking-related changes of the teat tissue in 2 breeds of dairy cows (11 Simmental and 3 Holstein) using B-mode ultrasonography. Additionally, the observed changes were compared with ultrasonographic findings in a Holstein cow with periparturient udder edema. Finally, corresponding histological sections of the Simmental teats were analyzed and compared with those from a lactating nonmilked Angus cow. We hypothesized that the mechanical load of both stretching by the vacuum during phases of open teat cup liner and compression by the closed liner during machine milking results in a transient congestion of blood vessels in the teat wall. The barrel of 1 front teat of each cow was scanned immediately before and after machine milking (system vacuum: 42 kPa; pulsation rate: 60 cycles/min; pulsation ratio: 65:35). Shortly after milking (33 ± 6 min), the Simmentals were slaughtered, and their scanned teat was immediately removed and processed for investigation by light microscopy. Ultrasonography after milking revealed anechoic tubular structures mainly in the inner half of the teat wall. Histological examination revealed these structures to be thick-walled veins. The left front and hind teats of the nonmilked lactating cow, collected and prepared identically to those from the Simmental cows, showed the same histological features. Ultrasonographic measurements showed that the diameter of these veins significantly increased after milking compared with matching images before milking. This effect was most pronounced in the Holstein cows. Similarly, these veins were very prominent in the periparturient cow. However, neither the milked cows, including the periparturient cow, nor the lactating nonmilked cow provided any evidence of edematous extravasation on ultrasonography or histology. These findings corroborated our hypothesis that the increase in size of thick-walled veins in the teat tissue is the main reason for the thickening of the teat walls in response to machine milking.     

Automatic application of teat disinfectant through the milking machine cluster

An automatic device, which infuses disinfectant into the mouthpiece of the liner of the milking machine cluster as teatcups are removed, is described. Application at this time avoids any delay in disinfection, reduces the workload in the parlour and increases reliability of application. The teats of 20 cows were contaminated before each milking by immersion in a suspension of Staphylococcus aureus and Streptococcus agalactiae and then disinfected manually or automatically with iodophor after milking. Str. agalactiae was recovered from less than 5% of swabs and there was no difference between the results from the two methods. Neither method of disinfection was as effective against Staph. aureus and the recovery rate was significantly greater for the automatic method for both swabs from teat barrel (P less than 0.05) and teat apex (P less than 0.001). Rates of intramammary infection for quarters automatically or manually disinfected were similar and low (3/40 v. 6/40 respectively). The automatic method facilitates cluster removal by relieving vacuum and decreasing frictional contact at the mouthpiece lip, and utilizes approximately half the quantity of disinfectant used by manual dipping (0.9 v. 1.9 ml/teat). However, iodine contamination in the milk from the iodophor teat disinfectant was significantly increased from 14.4 to 102.2 micrograms 12/100 ml milk when no backflushing was practised.     

Milk leakage--an increased risk in automatic milking systems

Milk leakage (ML), or milk observed dripping or flowing from one or more teats between milkings, has been associated with increased risk of udder infections and mastitis in dairy cows. Preliminary observations indicate that ML might occur more often in automatic milking systems (AMS) than in conventional milking systems (CMS), but comparative data on the incidence of ML in AMS or in CMS are not available. Therefore, the occurrence of ML at various observation periods was studied in one AMS with cows housed in a free-stall barn in comparison to CMS with cows housed either in a free-stall barn or a tie-stall barn and milked at regular intervals in a herringbone milking parlor. Relationships between ML and other cow and management factors were also examined. In each of 2 yr, all cows (n = 230 total; 46 cows present both years) were observed at 2-h intervals during six 24-h periods. At least one ML occurred in 39.0 (AMS) vs. 11.2% (CMS) of individual cows and in 16.2 (AMS) vs. 2.9% (CMS) of 24-h cow days studied. Milk leakage was not related to milk production, parity, stage of lactation, or estrous status. However, in the AMS, 62% of primiparous and 28% of multiparous cows leaked milk at least once. Milk leakage occurred more often in rear than in forequarters. Cows were usually lying down when ML was observed, but intervals from previous milking varied, especially in AMS. In AMS, about one-fifth of the ML observations occurred < or = 4 h after milking, and half of those were associated with disturbances at the previous milking. Milk flow rate was higher in quarters leaking milk than in other quarters. Strategies to reduce milk leakage in AMS may be important to minimize potential risks of udder disease.     

Genetics statistics and relationships of teat and udder traits, somatic cell counts, and milk production

Teat lengths and diameters, udder clearance, cleft depth, and distances between teats were measured from 1967 to 1982 on Holstein cows. Numbers of observations per trait ranged from 5934 to 11,449. Cows were from six herds owned by the North Carolina Department of Agriculture and two research herds of North Carolina State University. Repeatabilities between adjacent lactations for physical traits of udder were mostly between .60 and .80. Repeatabilities between first and second lactations for average somatic cell count and mean log somatic cell count were .11 +/- .04 and .21 +/- .04. Heritabilities in first lactation were .63 for front teat length, .44 for teat diameter, .56 for rear udder clearance, .10 for cleft depth, .32 for mature equivalent milk, and .18 for somatic cell counts. Heritabilities of distances between teats ranged from .33 to .48. Cows with udder clearance higher from the ground, deeper clefts, smaller distances between teats, and teats of smaller diameter had lower somatic cell counts. Multiple regression analysis showed that dams' somatic cell counts and rear udder clearances were not significant predictors of daughters' somatic cell counts. Lactation average somatic cell counts of daughters were predicted with greater accuracy from averages of somatic cell counts of multiple lactations of dams than from single lactations of dams. Milk production and somatic cell counts seemed positively genetically correlated, more so in first than later lactations.     

Systematic clinical examinations for identification of latent udder health types in Danish dairy herds

A cross-sectional study was conducted to explore the applicability of systematic clinical examinations of udders as an additional tool for the evaluation of udder health status on dairy farms. During 2000, each of the 16 dairy farms was visited 5 times; 20 cows per farm were chosen at random at each visit for clinical udder examination immediately after milking. The clinical examination included both pathological and morphological variables. One examination per cow was included in the analysis (n = 707 cows). Principal component analysis (PCA) was performed in 3 steps. First, 19 variables characterizing udder and teats were analyzed (PCA 1). Second, the variables parity and stage of lactation were included (PCA 2). Finally, somatic cell count (SCC) and milk yield (PCA 3) were included. The PCA resulted in 4 components that explained 30% of the variation of the data: 1) small udder, 2) distressed udder, 3) mastitis udder, and 4) soiled udder. Variables with high positive correlation to the "small udder" were small udder shape, short teats, and first parity. Impaired teat surface, hard udder texture, and a long udder shape were related to the "distressed udder." The "mastitis udder" was characterized by the clinical variables asymmetry between front quarters, asymmetry between hind quarters, knotty tissue, and acute clinical mastitis. Reduced milk yield and high SCC were related to the "mastitis udder," whereas low SCC was related to the "small udder." The "soiled udder" was related to early lactation. Including this information in the assessment of udder health may be of substantial value for data analysis in farms with suspected under-reporting of clinical mastitis.