Mechanism of reaction-front propagation in the Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> + 2Al mixture

Results of a combustion study of a powder mixture of Cr₂O₃ and Al burnt in an argon flow are reported. The combustion process is affected by a pressure difference along the filler by evacuating one end of the reaction cell. Effects of the initial density, gasifiable additive (borax or sodium carbonate), and pressure difference on specific features of the combustion process are examined. The data obtained were interpreted within the convective-conductive combustion theory of heterogeneous condensed systems.     

The Structure of Fusion-Cast High-Chrome Oxide Refractories in the Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> - MgO - Al<Subscript>2</Subscript>O<Subscript>3</Subscript> System

The phase composition and structure of fusion-cast refractories composed of 57.0 – 84.2% Cr₂O₃, 4.3 – 36.1% MgO, 2.0 – 9.7% Al₂O₃, and 2.4 – 6.9% SiO₂ have been studied by petrographic and x-ray spectral microprobe analysis methods. Refractories high in MgO with modulus M = (Cr₂O₃ +Al₂O₃)/MgO = 1.64 – 3.1 are shown to consist of spinel phase Mg(Cr, Al)₂O₄ and silicate glass. Refractory materials (80.8 – 84.2% Cr₂O₃, 4.3 – 4.7% MgO, 2.0 – 9.7% Al₂O₃, and 2.7 – 6.9% SiO₂ with M = 18.7 – 20.2) are three-phase systems composed of spinel, escolaite, and glass phase. These materials, owing to their high corrosion resistance, have promising potentiality for practical applications.__________Translated from Novye Ogneupory, No. 12, pp. 69 – 74, December, 2004.     

Synthetic spinels of the system MgO-Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

Synthetic spinels of the system MgO-Cr₂O₃-Al₂O₃-Fe₂O₃ are considered and the desirability of organizing their production for the refractory industry is demonstrated. Translated from Novye Ogneupory, No. 6, pp. 32–35, June 2008.     

Study on the properties of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-BaO lead-free glass using in the electronic pastes

The Sb₂O₃ doping lead-free glass in Bi₂O₃-B₂O₃-BaO ternary system were prepared in the composition of several different subsystem, and the glass powder was produced through the process of water quenching. Glass transition temperatures (T _g ), glass soften temperatures(T _s ), the volume resistivity (ρ) in the temperature range of 80–200°C, and linear thermal coefficients of expansion in the temperatures range of 25–300°C (α_25–300) were measured for subsystems along with the different ratio of Bi₂O₃, B₂O₃ and BaO. For these subsystems, T _g ranged from 458 to 481°C, and T _s ranged from 490 to 512°C, both decreasing with the increasing of Bi₂O₃/B₂O₃ ratio, and increasing with the increasing of BaO/B₂O₃ ratio. The measured α_25–300 ranged from 65.3 to 76.3 × 10⁻⁷ K⁻¹, with values increasing with increasing Bi₂O₃/B₂O₃ and BaO/B₂O₃ ratio. The volume resistivity remains at a high standards, which may caused by it’s non-alkali composition, and it fluctuated from 10¹³ to 10¹¹ Ω cm with the temperature varied from 80–200°C. The structure of Bi₂O₃-B₂O₃-BaO ternary leadfree glass system was mearsured by FT-IR. The IR studies indicate that these glasses are made up of [BiO₆], [BO₃], and [BO₄] basic structural units, and it appears that Ba²⁺ acts as a glass-modifier in this ternary system, but the Bi³⁺ has entered the glass network when it is in relative high content so as to change the α_25–300, T _s and T _g .     

Fusion-Cast High-Chrome Refractories Synthesized in the Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> - MgO - SiO<Subscript>2</Subscript> System

The synthesis and comprehensive study of fusion-cast refractories based on the Cr₂O₃ - MgO - SiO₂ system containing more than 60% Cr₂O₃ are reported. Analyzed by x-ray diffractometry and petrography, the synthesized materials display a phase composition represented by a complex spinel and escolaite. Tested for stability by molten alkali-free borosilicate E-glass, the synthesized refractories are shown to be not inferior in corrosion resistance to a chromium oxide-based ceramic refractory. __________ Translated from Novye Ogneupory, No. 10, pp. 68 – 74, October, 2005.     

Raman spectra and surface structure of CaO-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> glass leached in potassium hydroxide solutions

It is difficult to research on the surface structure of amorphous phase in fly ash during leaching reaction due to crystalline phase and complex structure. In the present work, in order to reveal the effects of leaching reaction on the surface structure of amorphous phase in fly ash, the modelling CaO-Fe₂O₃-Al₂O₃-SiO₂ glass was prepared by the traditional melting methods. The leaching reaction of CaO-Fe₂O₃-Al₂O₃-SiO₂ glass with 7.5 M KOH was investigated by spectroscopy, spectrophotometer and wet chemical method. The results show that the content of Q ¹, Q ², Q ³ and Q ⁴ of glass without corrosion was 4.21, 9.51, 23.03 and 52.55%, respectively, which shows that the network polymerization of glass is compact. The leaching reaction of glass can be described by the following equation: dS/dt = k/(r + S ₀). Leaching in KOH for various times induces the content of Q ⁴ and Q ¹ to be decreased, and Q ² and Q ³ increased, resulted in the depolymerization of network and the surface glass dissolved in alkaline solution to form a gel phase. In stage one of leaching reaction, the rate of iron ion leached from glass surface was slow, which resulted in the small slope of straight-line relationship of leaching curve. In the following stage, the leaching rate of iron ion increased with the prolongation of time.     

Interaction of O<Subscript>2</Subscript>, O<Subscript>3</Subscript>, and H<Subscript>2</Subscript>O<Subscript>2</Subscript> with an activated carbon

The results of the modification of AG-OV-1 activated carbon under various conditions (by atmospheric oxygen at elevated temperatures and by hydrogen peroxide or ozone) are given. The effect of the used modifier on changes in the porosity, surface state, and adsorption capacity of activated carbon is evaluated.     

Viscosity of glass melts in the SrO-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> system

The temperature dependences of the viscosity are investigated for three series of glass melts in the SrO-B₂O₃-SiO₂ system with a constant strontium oxide content equal to 35, 40, or 45 mol % in the viscosity range from 10¹⁰ to 10¹³ P.     

Formation of La<Subscript>2</Subscript>Ti<Subscript>2</Subscript>O<Subscript>7</Subscript> crystals from amorphous La<Subscript>2</Subscript>O<Subscript>3</Subscript>-TiO<Subscript>2</Subscript> powders synthesized by the polymerized complex method

Amorphous La₂O-TiO₂ powders were synthesized by the polymerized complex (PC) method. The activation energies for crystallization and grain growth of La₂Ti₂O₇ from these precursors were determined from results of XRD and DTA and compared with those for La₂Ti₂O₇ precursors by the conventional solid-state reaction (SSR). Activation energy of grain growth of La₂Ti₂O₇ in PC-sample was determined to be 7.1 kJ/mol while that of SSR sample was 14.8 kJ/mol. The energy required for the phase transformation from amorphous PC sample to layered perovskite was 432 kJ/mol, while the SSR sample did not show this transition below 900‡C. It was clearly demonstrated that the La₂Ti₂O₇ crystals were formed at a lower temperature and they grew in size faster in the sample prepared by the PC method relative to the sample prepared by the SSR method. Mixing of elements in molecular level in PC preparation appeared responsible for these differences.     

Electrochemical synthesis of ammonia from water and nitrogen catalyzed by nano-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> and CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> suspended in a molten LiCl-KCl-CsCl electrolyte

Nano-Fe₂O₃ and CoFe₂O₄ were suspended in molten salt of alkali-metal chloride (LiCl-KCl-CsCl) and their catalytic activity in electrochemical ammonia synthesis was evaluated from potentiostatic electrolysis at 600 K. The presence of nanoparticle suspension in the molten chloride resulted in improved production of NH₃, recording NH₃ synthesis rate of 1.78×10^?10 mol s^?1 cm^?2 and 3.00×10^?10 mol s^?1 cm^?2 with CoFe₂O₄ and Fe₂O₃, which are 102% and 240% higher than that without the use of a nanocatalyst, respectively. We speculated that the nanoparticles triggered both the electrochemical reduction of nitrogen and also chemical reaction between nitrogen and hydrogen that was produced from water electro-reduction on cathode. The use of nanocatalysts in the form of suspension offers an effective way to overcome the sluggish nature of nitrogen reduction in the molten chloride electrolyte.     

Phase equilibria in the Ho<Subscript>2</Subscript>O<Subscript>3</Subscript>-SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript> system

The phase formation is investigated and the phase diagram of the Ho₂O₃-SrAl₂O₄ system is constructed. A ternary compound, namely, Ho₂SrAl₂O₇, is revealed. It is established that this compound undergoes incongruent melting.     

Phase Equilibria in the Gd<Subscript>2</Subscript>O<Subscript>3</Subscript>-SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript> System

The phase equilibria are investigated and the phase diagram is constructed for the Gd₂O₃-SrAl₂O₄ pseudobinary join of the Gd₂O₃-SrO-Al₂O₃ ternary oxide system. One ternary compound, namely, Gd₂SrAl₂O₇, is revealed in the Gd₂O₃-SrAl₂O₄ join. It is found that this compound undergoes congruent melting.     

Synthesis and properties of flux-cast refractories in the Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-MgO-B<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Details are given of the synthesis and testing of flux-cast refractory materials in the alumina-rich region of the Al₂O₃-MgO-B₂O₃ system; XRD and petrography indicate that the main structure-forming phases are corundum and magnesian spinel. In subordinate amounts there are the boroaluminate 9Al₂O₃·2B₂O₃ and the previously unknown compound 4Al₂O₃·MgO·2B₂O₃, whose composition has been established by microprobe analysis. Corrosion tests showed that three-component systems containing magnesium and boron oxides at levels of 5–10% do not increase the corrosion resistance of refractories in molten sodium-calcium-silicate glass and electrovacuum borosilicate glass. __________ Translated from Novye Ogneupory, No. 3, pp. 161–163, March, 2008.     

Structure and crystallization of ZnO-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Structure and crystalline behavior of the ternary system ZnO-B₂O₃-P₂O₅ glasses were investigated by means of X-ray diffraction (XRD) and infrared Raman spectra. The research showed that number of the planar [BO₃] units increases with the increase of B₂O₃ content. When the B₂O₃ content is above ≥10 mol %, the relative content of planar [BO₃] units increases rapidly and causes weakening of the glass structure and decrease in the chemical stability. In the crystallized glasses the predominant crystal phase Zn₂P₂O₇ decreases with the increase of B₂O₃ content, while the crystal phase BPO₄ increases with it, which cause the declining of chemical stability and the decrease of thermal coefficients of expansion.     

Electroconducting ceramics based on In<Subscript>2</Subscript>O<Subscript>3</Subscript>, CdO,and LaCrO<Subscript>3</Subscript>

The possibility of fabricating electroconducting (10¹–10⁴ S cm^–1) ceramics based on In₂O₃, CdO, and LaCrO₃ by liquid-phase synthesis methods has been demonstrated. The results of studies of the effect of temperature, dopants, and partial oxygen pressure on the specific electroconductivity of ceramic composites are presented.     

Europium(II) in glasses of the Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript>-MnO-Eu<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Triply and doubly charged states of europium are revealed by ¹⁵¹Eu Mössbauer spectroscopy in the structure of glasses of the composition (mol %) 19.5Al₂O₃, 31.5SiO₂, 26.5MnO, and 22.5Eu₂O₃. The isomer shifts in the Mössbauer spectra of Eu³⁺ and Eu²⁺ ions in the structure of glasses differ from the isomer shifts in the spectra of the Eu₂O₃ and EuO compounds. This difference is explained by the fact that the electron density at ¹⁵¹Eu nuclei is affected by the manganese and aluminum atoms, which are not bound directly to the europium atoms. The broadening of the spectra of the Eu²⁺ ions in glasses is caused by the nonuniform isomer shift.     

Local crystallization of glasses in the La<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-GeO<Subscript>2</Subscript> system under laser irradiation

A method is proposed for local crystallization of glasses under laser irradiation. This method makes it possible to nucleate and grow microcrystals with a size distribution similar to a monodisperse distribution for several fractions of a second in any glass region chosen in advance. It is demonstrated using glasses in the La₂O₃-B₂O₃-GeO₂ system as an example that the crystallization of the stillwellite-like phase LaBGeO₅ with the composition close to the composition of the initial glass is observed in the glass under irradiation with the copper vapor laser operating in the high-speed pulse modulation mode. Strips (up to ～300 μm) produced at a specified depth from the glass surface contain extended regions consisting of uniformly distributed crystals, which have almost identical sizes, exhibit a pronounced faceting, and are identified using X-ray diffraction. The size and the number of crystals can be changed over a wide range by varying laser treatment conditions. This opens up the way to the design of new glass-ceramic materials in which the location of the crystalline phase in the glass bulk is controlled by a developer.     

Effect of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-ZrO<Subscript>2</Subscript> xerogel support on hydrogen production by steam reforming of LNG over Ni/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-ZrO<Subscript>2</Subscript> catalyst

An Al₂O₃-ZrO₂ xerogel (AZ-SG) was prepared by a sol-gel method for use as a support for a nickel catalyst. The Ni/AZ-SG catalyst was then prepared by an impregnation method, and was applied to hydrogen production by steam reforming of LNG. A nickel catalyst supported on commercial alumina (A-C) was also prepared (Ni/A-C) for comparison. The hydroxyl-rich surface of the AZ-SG support increased the dispersion of nickel species on the support during the calcination step. The formation of a surface nickel aluminate-like phase in the Ni/AZ-SG catalyst greatly enhanced the reducibility of the Ni/AZ-SG catalyst. The ZrO₂ in the AZ-SG support increased the adsorption of steam onto the support and the subsequent spillover of steam from the support to the active nickel sites in the Ni/AZ-SG catalyst. Both the high surface area and the well-developed mesoporosity of the Ni/AZ-SG catalyst improved the gasification of adsorbed surface hydrocarbons in the reaction. In the steam reforming of LNG, the Ni/AZ-SG catalyst showed a better catalytic performance than the Ni/A-C catalyst. Moreover, the Ni/AZ-SG catalyst showed strong resistance toward catalyst deactivation.     

The difference in hydrogenation performance between Ni-in-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Ni-on-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> for hydrotreating of crude 2-ethylhexanol

Two mesoporous material Ni/γ-Al₂O₃ catalysts were prepared and characterized by ICP-AES, XRD, and TPR. The differences in reaction activity between Ni-in-Al₂O₃ and Ni-on-Al₂O₃ were investigated for hydrotreating of crude 2-ethylhexanol. The results show that the Ni species (Ni-on-Al₂O₃) exhibit excellent hydrogenation activities at a wide range of H₂ pressure and space velocity, while the Ni species (Ni-in-Al₂O₃) exhibit similar activities with those of Ni-on-Al₂O₃ only at higher H₂ pressure and lower space velocity. Due to the presence of extensively exposed Ni species on the Ni-on-Al₂O₃ catalyst, its hydrogenation performance was increased significantly because of the low interphase mass transfer resistance.