曲面共形阵列结构快速数值分析方法

针对曲面共形阵列结构电磁散射特性的高效、精确仿真分析需求,提出了一种并行综合函数矩量法处理方案.该方法是传统电磁经典数值算法——矩量法的一种改进形式,通过几何区域分解处理和综合基函数的方式极大降低了算法的内存消耗,使得单机分析电大尺寸问题和大规模阵列问题成为可能.更为重要的是,针对周期阵列结构,该方法具备综合函数复用特性和多区域并行处理特性,能够大大提高算法的综合处理效率.一个6×11的柱面共形贴片阵列被用于验证所提方法的性能,仿真结果表明,对于周期阵列结构,该方法的计算精度与多层快速多极子算法相当,虽然计算效率略低于多层快速多极子方法,但内存消耗比多层快速多极子方法低一个数量级.     

金属-介质混合目标电磁散射的P-FFT快速求解

针对任意形状金属-介质混合目标的电磁散射问题,使用矩量法将体-面结合的积分方程(VSIE)转换成线性方程组,并利用预修正快速傅立叶变换(P-FFT)方法来进行快速求解.为减少直接计算和预修正的近区未知量个数,采用一种改进的模板拓扑.数值计算结果表明,基于VSIE的P-FFT方法可以高效准确地求解金属-介质混合目标的电磁散射问题,改进的模板拓扑可以显著减少近区未知量个数,从而减少算法的存储需求和计算时间.     

结合P-FFT算法和特征基函数分析大型阵列散射

特征基函数方法利用特征值分解提取目标散射特征,构造基于特征向量的基函数可以高效的缩减矩量法分析所需的未知量数目,有利于分析有限周期阵列电磁散射或辐射问题。然而,对于电大尺寸电磁阵列散射问题,直接求解由特征基函数组成的矩阵方程,仍然面临着计算量较大等问题,难以适用于单机计算。本文结合特征基函数和预修正傅里叶快速算法求解体面结合积分方程,分析了大型金属介质混合有限周期阵列的散射特性,该算法有效减少了计算量和计算时间,并且改善了迭代求解收敛性能。     

用于分析电磁散射问题的快速多极算法

介绍了用于分析电磁散射问题的快速多极算法(FMA)和多层快速多极算法(MLFMA)的基本思想与基本步骤。通过计算实例表明,快速多极算法在计算速度和存贮要求方面比矩量法有明显优势,适合于在现有计算机条件下求解电大尺寸目标的散射问题。     

任意形状单元有限微带阵列的电磁散射分析

提出一种有限微带阵列电磁散射特性分析的有效方法。该法采用有限阵格林函数与矩量法相结合的方法，有效地解决了矩量法在大型阵列电磁特性分析中的计算效率问题；通过选取RWG基函数，使该法适用于任何单元形状的微带阵列。文中计算了矩形、十字形及圆形单元微带阵列的雷达截面，并与常规矩量法和参考文献的计算结果进行了比对，验证了该方法的有效性。     

介质涂敷电大尺寸导体柱电磁散射特性的有限元-快速多极混合算法分析

采用有限元-快速多极混合算法分析了介质涂层电大尺寸导体柱的电磁散射特性。与有限元-矩量法相比,快速多极算法将计算复杂度从Ｏ(N2)降低到O(N1.5),大大加快计算速度,减少存储量。计算表明该混合算法对电大复杂涂敷目标电磁特性的分析是灵活而有效的。     

三维导体介质复合结构电磁辐射与散射的MLFMA分析

利用多层快速多极子方法(MLFMA)分析三维导体介质复合结构的电磁辐射与散射特性.根据等效原理,介质表面构造Poggio-Miller-Chang-Harrington-Wu(PMCHW)方程,导体表面建立电场积分方程(EFIE).分析了含介质目标MLFMA算法中远区组矩阵矢量相乘运算以及有耗媒质空间中格林函数的平面波展开.利用该方法研究了涂敷目标电磁散射特性以及天线罩对直线阵天线辐射特性的影响.MLFMA的应用降低了计算量和存储量,实现了对电大尺寸目标快速、准确的求解.     

用于分析电磁散射问题的快速多极算法

介绍了用于分析电磁散射问题的快速多极算法（FMA）和多层快速多极算法（MLFMA）的基本思想与基本步骤。通过计算实例表明，快速多极算法在计算速度和存贮要求方面比矩量法有明显优势，适合于在现有计算机条件下求解电大尺寸目标的散射问题。     

MM-PO分析电大天线-载体系统的电磁特性

针对电大尺寸目标体的电磁散射和辐射特性,在以处理表面积分方程的矩量法(Moment method,MM)为代表的低频法基础上,将物理光学法(Physical Optical Method,PO)与之有机结合起来,构成MM-PO混合法,对局部区域较为平坦的大型反射面天线、阵列以及载体系统电磁辐射或散射特性进行了仿真研究。结果表明该混合法对于快速有效地分析该类问题具有良好的适用性。     

混合ACA和MLFMA方法计算复合目标电磁散射

采用矩量法(MoM)计算电大尺寸的复合目标的电磁散射。为了能够高效快速地计算电大尺寸三维复合目标的电磁散射,提出一种新的混合方法,将自适应交叉近似(ACA)算法和多层快速多级子(MLFMA)算法相结合,共同加速矩量法的计算。其中,MLFMA用于加速目标与自身的作用,ACA用于加速目标与其他目标的相互作用。提出的混合算法在计算复合目标电磁散射时,可降低运算存储,缩短阻抗矩阵填充时间,并且能够加快矩阵矢量乘,且不影响计算精确度。数值算例表明,所提快速算法能够在保证电磁散射计算精确度前提下,比传统方法更高效。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks     

Call for Papers—Feature Topic,Vol.12,No.7,2015

正Information Centric Networking Information-Centric Networking(ICN) is an emerging direction in Future Internet architecture research,gaining significant tractions among academia and industry.Aiming to replace the conventional host-to-host communication model by a data-centric model,ICN treats data content as the first