共查询到16条相似文献,搜索用时 93 毫秒
1.
刘婷婷朱光明魏堃王永坤宋蕊 《高分子材料科学与工程》2013,(11):183-186
形状记忆聚合物复合材料已成为形状记忆材料的研究热点和重点,文中针对近年来形状记忆聚合物复合材料的最新研究进行了综述。分别对颗粒增强、纤维增强和颗粒纤维混合3类增强材料制备的形状记忆聚合物复合材料的结构与性能特点进行了分析和评述;着重阐述了形状记忆聚合物复合材料形状记忆效应的机理以及影响形状记忆行为的因素;分析了形状记忆聚合物复合材料研究中存在的问题,同时对形状记忆聚合物复合材料的应用前景进行了展望。 相似文献
2.
形状记忆聚合物是一种新型智能材料,广泛应用于医疗和航天领域。但是传统的形状记忆聚合物由于力学强度低、形变回复力小等缺点使其发展应用受到限制。主要介绍了以各种形状记忆聚合物为基体,添加增强填料来制备形状记忆聚合物复合材料,并且描述了复合材料的形状记忆效应与力学性能和填料的体积分数或质量分数之间的关系,以及形状记忆聚合物复合材料的应用领域与前景。 相似文献
3.
4.
5.
形状记忆聚合物的本构关系对于其结构设计和力学行为的预报具有重要意义,但是目前对形状记忆聚合物本构模型的研究仍相对不多。文中通过回顾十几年来国内外对热驱动形状记忆聚合物本构模型研究的发展动态,归纳了形状记忆聚合物本构的建模方法与思想,按照流变学方法、细观力学方法以及二者相结合的方法分别加以介绍和评述,并对形状记忆聚合物本构建模今后可能面临解决的关键问题进行了预测。 相似文献
6.
热固性环氧树脂形状记忆聚合物是目前形状记忆聚合物研究领域的热点之一,文中介绍了热固性环氧树脂形状记忆聚合物的最新研究进展,详细探讨了各种热固性环氧树脂形状记忆聚合物的特点与性能,以及温度、辐射、固化程度对环氧树脂形状记忆聚合物性能的影响,并对环氧树脂形状记忆复合材料的性能进行了讨论,最后分析了热固性环氧树脂形状记忆聚合物研究中存在的问题。 相似文献
7.
8.
9.
10.
11.
Abstract: Composite sandwich panels fabricated using a thermosetting shape memory polymer matrix material and a corresponding thermoset shape memory polymer foam core offer the potential to demonstrate large, recoverable, deformations in otherwise stiff structures, under flexural loading. However, as with flexure of thin, fibre‐reinforced shape memory matrix laminates, deflection is limited by fibre compression buckling because of the reduced shape memory matrix stiffness at elevated temperature. A hybrid matrix concept has been developed for sandwich panels loaded in flexure in a single direction. This concept uses a non‐shape memory resin as the matrix for a fraction of the plies on the surface of the facesheet loaded in compression. It is predicted that, at the elevated temperatures required for the generation of deformation in the shape memory structural sandwich panel, the shape memory matrix and foam moduli will be substantially reduced, while the modulus of the non‐shape memory resin will not. Thus, at elevated temperature this effectively leads to a shift of the neutral axis towards the non‐shape memory surface, keeping the low stiffness shape memory matrix material in tension and extending the range of deformation prior to onset of fibre buckling. The experiments performed demonstrate that this hybrid matrix approach enables a three‐fold increase in mid‐span deformation prior to buckling of fibres in the compression surface plies. Furthermore, the force measured to attain the deformed geometry, at elevated temperature, only increases approximately 10–15%, while the magnitude of the force required remains very low. Thus, the hybrid matrix approach functions as predicted and enables the development of sandwich panel structural elements which can undergo large, recoverable deformations. 相似文献
12.
13.
综述了镍钛、铜基、铁基形状记忆合金,热致型、光致型、电致型、磁致型、化学感应型形状记忆高分子,以及形状记忆陶瓷的形状记忆机理、特性及其应用现状,并提出形状记忆材料的研究方向为:加强形状记忆合金的抗疲劳性能研究,建立一套统一的研究方法和合理的评价体系;加强形状记忆高分子材料的结构设计研究;改善陶瓷的形状记忆性能,以拓展形状记忆陶瓷的应用领域。 相似文献
14.
具有形状记忆功能的高分子材料 总被引:11,自引:0,他引:11
本文综述了具有形状记忆功能的高分子材料的发展概况 ,分析了形状记忆高分子材料的记忆效应原理 ,并对交联聚烯烃、聚氨酯、聚酯等具有形状记忆功能的高分子材料的特性及应用进行了评价和探讨 ,同时对形状记忆高分子材料的发展前景进行了展望 相似文献
15.
形状记忆材料杜仲胶的特性及研究进展 总被引:1,自引:0,他引:1
从介绍形状记忆高分子材料定义及分类出发,引入了形状记忆高分子材料杜仲胶的记忆类型。深入分析了杜仲胶形状记忆材料的记忆原理;概括叙述了形状记忆材料杜仲胶的研究现状及应用;并对形状记忆高分子材料杜仲胶的发展趋势进行了展望。 相似文献
16.
采用动态力学分析仪对研制的形状记忆环氧树脂(Shape memory epoxy polymer,SMEP)及三种四枚缎纹碳纤维织物增强环氧树脂复合材料的动态力学性能进行了测试,测出了玻璃化转变温度Tg、储能模量E和损耗角正切值tanδ。试验表明,SMEP及四枚缎纹碳纤维织物增强环氧树脂复合材料均有显著的相变力学行为特征,相变前后E差异超过一个量级,表明其具有良好形状记忆能力。在SMEP中植入碳纤维织物增强复合材料会导致Tg和tanδ降低,而E显著增强;对同一种编织物的形状记忆复合材料经向和纬向的Tg和tanδ基本相同,但E相差较大。 相似文献