The microbiology of mixed salad containing raw and cooked ingredients without dressing

Growth of aerobic mesophilic bacteria in mixed salad without dressing, containing cooked sweet corn and raw endive, was similar to that of raw endive alone. At 9°C, sweet corn permitted the growth of the lactic acid bacterium Leuconostoc mesenteroides , whenever the bacterium was present on raw endive, whereas no growth of lactic acid bacteria was recorded on raw endive alone. Listeria monocytogenes , artificially inoculated in the samples, grew more in the mixed salad than in the raw endive alone, for products stored at 6°C and 9°C. Acidification of sweet corn to pH 5.0 was proposed to reduce the development of L. monocytogenes in the mixed salad to a level similar to that recorded in the raw endive alone. Acidification with citric acid reduced spoilage of sweet corn, whereas acetic acid caused necrosis on the leaves of raw endive.     

A Novel Neurofilament Light Chain ELISA Validated in Patients with Alzheimer’s Disease,Frontotemporal Dementia,and Subjective Cognitive Decline,and the Evaluation of Candidate Proteins for Immunoassay Calibration

Neurofilament light chain (Nf-L) is a well-known biomarker for axonal damage; however, the corresponding circulating Nf-L analyte in cerebrospinal fluid (CSF) is poorly characterized. We therefore isolated new monoclonal antibodies against synthetic peptides, and these monoclonals were characterized for their specificity on brain-specific intermediate filament proteins. Two highly specific antibodies, ADx206 and ADx209, were analytically validated for CSF applications according to well-established criteria. Interestingly, using three different sources of purified Nf-L proteins, a significant impact on interpolated concentrations was observed. With a lower limit of analytical sensitivity of 100 pg/mL using bovine Nf-L as the calibrator, we were able to quantify the Nf-L analyte in each sample, and these Nf-L concentrations were highly correlated to the Uman diagnostics assay (Spearman rho = 0.97, p < 0.001). In the clinical diagnostic groups, the new Nf-L ELISA could discriminate patients with Alzheimer’s disease (AD, n = 20) from those with frontotemporal lobe dementia (FTD, n = 20) and control samples with subjective cognitive decline (SCD, n = 20). Henceforth, this novel Nf-L ELISA with well-defined specificity and epitopes can be used to enhance our understanding of harmonizing the use of Nf-L as a clinically relevant marker for neurodegeneration in CSF.     

Chelating Polymers for Targeted Decontamination of Actinides: Application of PEI-MP to Hydroxyapatite-Th(IV)

In case of an incident in the nuclear industry or an act of war or terrorism, the dissemination of plutonium could contaminate the environment and, hence, humans. Human contamination mainly occurs via inhalation and/or wounding (and, less likely, ingestion). In such cases, plutonium, if soluble, reaches circulation, whereas the poorly soluble fraction (such as small colloids) is trapped in alveolar macrophages or remains at the site of wounding. Once in the blood, the plutonium is delivered to the liver and/or to the bone, particularly into its mineral part, mostly composed of hydroxyapatite. Countermeasures against plutonium exist and consist of intravenous injections or inhalation of diethylenetetraminepentaacetate salts. Their effectiveness is, however, mainly confined to the circulating soluble forms of plutonium. Furthermore, the short bioavailability of diethylenetetraminepentaacetate results in its rapid elimination. To overcome these limitations and to provide a complementary approach to this common therapy, we developed polymeric analogs to indirectly target the problematic retention sites. We present herein a first study regarding the decontamination abilities of polyethyleneimine methylcarboxylate (structural diethylenetetraminepentaacetate polymer analog) and polyethyleneimine methylphosphonate (phosphonate polymeric analog) directed against Th(IV), used here as a Pu(IV) surrogate, which was incorporated into hydroxyapatite used as a bone model. Our results suggest that polyethylenimine methylphosphonate could be a good candidate for powerful bone decontamination action.     

Study on conductivity and redox stability of iron orthovanadate

FeVO₄ was synthesised by conventional solid state technique. Impedance measurements using a silver electrode were unsuccessful due to a solid state reaction between FeVO₄ and Ag, forming α-AgVO₃ and α-Fe₂O₃ at the interface. Impedance measurements, with a platinum electrode, reaffirmed that FeVO₄ exhibits semiconductor behaviour in air. In a reducing atmosphere, 5% H₂/Ar, high electronic conductivity, from 1 S cm⁻¹ at 300 °C to 2 S cm⁻¹ at 700 °C, was observed with an activation energy of 0.13(1) eV. X-ray diffraction, thermogravimetric analysis and differential scanning calorimetry data determined that the change in electronic conductivity was due to the degradation of the material into FeV₂O₄ and α-Fe₂O₃. It is believed that the conduction was due to electron hopping between vanadium d-orbitals. Neither FeVO₄ nor FeV₂O₄ are deemed suitable as anode materials for solid oxide fuel cells, due to redox instability.     

Evaluation of three MRI-based anatomical priors for quantitative PET brain imaging

In emission tomography, image reconstruction and therefore also tracer development and diagnosis may benefit from the use of anatomical side information obtained with other imaging modalities in the same subject, as it helps to correct for the partial volume effect. One way to implement this, is to use the anatomical image for defining the a priori distribution in a maximum-a-posteriori (MAP) reconstruction algorithm. In this contribution, we use the PET-SORTEO Monte Carlo simulator to evaluate the quantitative accuracy reached by three different anatomical priors when reconstructing positron emission tomography (PET) brain images, using volumetric magnetic resonance imaging (MRI) to provide the anatomical information. The priors are: 1) a prior especially developed for FDG PET brain imaging, which relies on a segmentation of the MR-image (Baete , 2004); 2) the joint entropy-prior (Nuyts, 2007); 3) a prior that encourages smoothness within a position dependent neighborhood, computed from the MR-image. The latter prior was recently proposed by our group in (Vunckx and Nuyts, 2010), and was based on the prior presented by Bowsher (2004). The two latter priors do not rely on an explicit segmentation, which makes them more generally applicable than a segmentation-based prior. All three priors produced a compromise between noise and bias that was clearly better than that obtained with postsmoothed maximum likelihood expectation maximization (MLEM) or MAP with a relative difference prior. The performance of the joint entropy prior was slightly worse than that of the other two priors. The performance of the segmentation-based prior is quite sensitive to the accuracy of the segmentation. In contrast to the joint entropy-prior, the Bowsher-prior is easily tuned and does not suffer from convergence problems.     

A patient-mounted robotic platform for CT-scan guided procedures

In this paper, we present a novel robotic assistant dedicated to medical interventions under computed tomography scan guidance. This compact and lightweight patient-mounted robot is designed so as to fulfill the requirements of most interventional radiology procedures. It is built from an original 5 DOF parallel structure with a semispherical workspace, particularly well suited to CT-scan interventional procedures. The specifications, the design, and the choice of compatible technological solutions are detailed. A preclinical evaluation is presented, with the registration of the robot in the CT-scan.     

Towards a new tool for the evaluation of the quality of ultrasound compressed images

This paper presents a new tool for the evaluation of ultrasound image compression. The goal is to measure the image quality as easily as with a statistical criterion, and with the same reliability as the one provided by the medical assessment. An initial experiment is proposed to medical experts and represents our reference value for the comparison of evaluation criteria. Twenty-one statistical criteria are selected from the literature. A cumulative absolute similarity measure is defined as a distance between the criterion to evaluate and the reference value. A first fusion method based on a linear combination of criteria is proposed to improve the results obtained by each of them separately. The second proposed approach combines different statistical criteria and uses the medical assessment in a training phase with a support vector machine. Some experimental results are given and show the benefit of fusion.     

Architecture de turbo-décodeur en blocs entièrement parallèle pour la transmission de données au-delà du Gbit/s

This paper presents a new circuit architecture for turbo decoding, which achieves ultra high data rates when using product codes as error correcting codes. This architecture is able to decode product codes using binary BCH or m-ary Reed Solomon component codes. The major advantage of our full-parallel architecture is that it enables the memory block between each half-iteration to be removed. In fact, the proposed architecture opens the way to numerous applications such as optical transmission. In particular, our block turbo decoding architecture can support optical transmission at data rates above Gbit/s     

Overview of the MPEG Reconfigurable Video Coding Framework

Video coding technology in the last 20 years has evolved producing a variety of different and complex algorithms and coding standards. So far the specification of such standards, and of the algorithms that build them, has been done case by case providing monolithic textual and reference software specifications in different forms and programming languages. However, very little attention has been given to provide a specification formalism that explicitly presents common components between standards, and the incremental modifications of such monolithic standards. The MPEG Reconfigurable Video Coding (RVC) framework is a new ISO standard currently under its final stage of standardization, aiming at providing video codec specifications at the level of library components instead of monolithic algorithms. The new concept is to be able to specify a decoder of an existing standard or a completely new configuration that may better satisfy application-specific constraints by selecting standard components from a library of standard coding algorithms. The possibility of dynamic configuration and reconfiguration of codecs also requires new methodologies and new tools for describing the new bitstream syntaxes and the parsers of such new codecs. The RVC framework is based on the usage of a new actor/ dataflow oriented language called CAL for the specification of the standard library and instantiation of the RVC decoder model. This language has been specifically designed for modeling complex signal processing systems. CAL dataflow models expose the intrinsic concurrency of the algorithms by employing the notions of actor programming and dataflow. The paper gives an overview of the concepts and technologies building the standard RVC framework and the non standard tools supporting the RVC model from the instantiation and simulation of the CAL model to software and/or hardware code synthesis.