Effects of Surface Concentration on Drying Behavior of Carbohydrate Solutions

As the surface properties of the drying materials are very important not only for the drying rate but also for the quality change during drying, the effects of surface concentration on the drying behavior of liquid foods (sugar solutions) were investigated by isothermal drying experiments and by numerical calculation experiments. The isothermal drying experiments with gelled sugar solution systems (sucrose and maltodextrin) were carried out at various relative humidity (RH) values (RH = 0 to 84%). Separate experiments were carried out for determination of the desorption isotherms.

The isothermal drying curves of sugar solutions at RH = 0 to 51% were very similar. Numerical simulations also showed that the drying curves of these sugars at the surface concentration = 0 and 0.1 are almost the same, although the concentration distributions are different.

When a small amount of gelatin was added to sugar solutions, the drying rate decreased remarkably as the gelatin might form a thin film (skin) near the surface, and consequently the retention of ethanol increased.     

Lack of carcinogenicity of medium-viscosity liquid paraffin given in the diet to F344 rats

The carcinogenicity of medium-viscosity liquid paraffin was examined in Fischer 344 rats. Groups of 50 males and 50 females were given the material at dietary doses of 0 (control), 2.5 or 5% for 104 wk. Slight increases in food consumption and body weight were observed in both sexes of the 5% group. However, no significant differences between the control and treated groups were noted with regard to clinical signs, mortality and haematology findings. A variety of tumours developed in all groups, including the control group, but all the neoplastic lesions were histologically similar to those known to occur spontaneously in F344 rats, and no statistically significant increase in the incidence of any tumour type was found for either sex in the treated groups. Granulomatous inflammation in the mesenteric lymph nodes, considered to be a reaction to paraffin absorption, was observed with similar incidence and severity in both sexes of the 2.5 and 5% groups. Thus, it is concluded that under the present experimental conditions, the high dose, about 2000-200,000 times higher than the current temporary acceptable daily intake, does not have any carcinogenic potential in F344 rats. Furthermore, granulomatous inflammation observed in mesenteric lymph nodes were not associated with any development of neoplastic lesions.     

An equation of state for 1,1-difluroethane (HFC 152a)

An equation of state for 1,1-difluoroethane (HFC 152a, CH₃CHF₂) has been developed on the basis of reliable experimental data including PVT, liquid C_p, and saturated-liquid-density data measured by our group. It is a non-dimensionalized virial equation whose functional form is the same as that originally developed for 1,1,1,2-tetrafluoroethane (HFC 134a) in our group. The effective range is for pressures up to 15 MPa, temperatures from 230 to 450 K, and densities to 1000 kg m⁻³. The equation represents reliable PVT measurements within ± 1% in pressure for the superheated vapour and supercritical fluid, while within ±0.5% in density for the compressed liquid. In addition, it should be noted that the equation represents the other essential thermodynamic properties including vapour pressures, saturated-liquid/ vapour densities, isobaric/isochoric specific heats and sound velocity in both the liquid and gaseous phase of HFC 152a.     

Impulse breakdown voltages of triggered multistage vacuum gap

Several sealed-off triggered vacuum gaps are connected in series to improve hold-off voltage. The characteristics of impulse breakdown voltage of these series-connected gaps are investigated experimentally. The sum hold-off voltage of series-connected gaps decreases to a unit hold-off voltage when the maximum value of voltage division ratio across the gaps increases to unity. Self-breakdown probability of the series-connected gaps is always higher than that of a single gap under the same conditions. Hence, stage efficiency of the multistage gap decreases with increasing number of stages. Its value is 90 percent with 2-stage gap and 75 percent with 5-stage gap, respectively, under the same voltage division ratio and the same gap length (2.0 mm) in each stage. Triggered breakdown voltage of 2- or 3- stage gap is several hundred volts when all gaps are triggered simultaneously at the peak of the main impulse wave and a working voltage range is nearly 100 percent in this case. The working voltage range decreases with number of stages. Its value is 45 percent with 3-stage gap and 15 percent with 5-stage gap, respectively, when one triggered gap is fired for switching.     

Surface Hardening of Carbon Steel Using High Powered YAG Laser

A high powered YAG laser with kaleidoscope for surface modification was applied to the surface hardening of carbon steels containing 0. 18-0.54 wt% C without the absorbents, and the relationships between laser processing and surface hardening were investigated by hardness and microstructure. The structure of the hardened zone underwent complete martensitic transformation in all of the carbon steels tested, and its hardness increased with greater carbon content. Under identical irradiated conditions, the hardened zone expanded with increasing carbon content. A hardened zone extending from the surface to a depth of 1.0 mm was obtained at a laser power of 1.0 kW and a scanning speed of 1 mm/sec. It was found that in the surface hardening of carbon steels, a high powered YAG laser can be used to control the hardened zone by selecting the appropriate irradiation conditions, however, the hardened zone was affected by the assistant gas and the flow rate.     

Far-Infrared Reflection Spectra of Dielectric Ceramics for Microwave Applications

Far-infrared reflection spectra of dielectric ceramics, BaSm₂Ti₅O₁₄, BaTi₄O₉, and some pcrovskites such as Ba(Zn_1/3Nb_2/3)O₃, have been measured at room temperature using a Fourier transform infrared spectrometer in order to investigate the effect of the crystal structure on the dielectric properties. As for perovskites, Sr(Zn_1/3Nb_2/3)O₃ and Sr(Mg_1/3Nb_2/3)O₃, in which B site ions are ordered, were also measured. Reflectance data were analyzed by means of a factorized form of dielectric functions instead of the classical dispersion theory, and all of the spectra were well fitted. The values of dielectric constants and tan δ calculated from the reflectance data were in good agreement with resonant cavity measurements at 5 GHz. Furthermore, results of this study have shown that the main contribution to the microwave dielectric properties is caused by low-frequency optically active modes located at 50 to about 300 cm⁻¹, and for perovskite structures it is suggested that the ordering of B site ions is significant in obtaining low dielectric losses.     

Melatonin inhibits naloxone-induced luteinizing hormone release in ovariectomized estrogen-primed rats

The present study aimed to examine the effect of melatonin on naloxone-induced luteinizing hormone (LH) secretion in ovariectomized estrogen-primed rats. A single intracerebroventricular (i.c.v.) injection of naloxone (mu opioid receptor blocker, 15 micrograms) or an intravenous (i.v.) injection of LH-releasing hormone (LHRH, 50 ng/kg) elicited a transient and significant increase in the serum LH concentration within 10 min. While an i.c.v. injection of 100 ng melatonin by itself did not change the basal LH release, it almost completely inhibited the naloxone-induced LH release. Melatonin (10 ng) also significantly reduced the effect of naloxone. However, an i.c.v. injection of 100 ng melatonin did not affect the LHRH-induced LH release. In separate experiments, the effect of melatonin on naloxone-induced pulsatile LH secretion was studied in estrogen-treated rats. A continuous i.v. infusion of naloxone (20 mg/kg/h) induced LH pulses in rats treated i.c.v. with saline. An i.c.v. administration of 100 ng melatonin, which by itself did not affect basal LH secretion, significantly reduced the frequency, but not the amplitude, of LH pulses induced by the naloxone infusion. These results show that melatonin has a suprapituitary site of action to inhibit naloxone-induced LH release, and suggest that melatonin has an effect in inhibiting the activity of the hypothalamic LHRH pulse generator, either directly or indirectly, in female rats.     

Functional monomers and polymers, 64. Synthesis of poly-β-alanine from β-alanine, β-alanyl-β-alanine,and β-alanyl-β-alanyl-β-alanine 4-dodecanoyl-2-nitrophenyl esters

Active 4-dodecanoyl-2-nitrophenyl esters of β-alanine, β-alanyl-β-alanine, and β-alanyl-β-alanyl-β-alanine were prepared, and tried to polymerize in various solvents. Nonpolar solvents were found to be convenient for the polycondensation reaction. The yield of the polycondensation was high for the monopeptide ester, and less for the dipeptide and tripeptide esters. The effect of temperature on the polycondensation reaction was also studied.     

Microscopic structure of athabasca oil sand

A refined structural model for in situ oil sands is proposed in terms of the mutual arrangement of sand grains, fines, water and bitumen. In the Athabasca deposit, the sand grains consist mainly of quartz and their packing is such that the porosity is about 35%. In rich oil sand, 10–15% of the pore space is occupied by connate water whereas the remainder is occupied by bitumen. For lower grade oil sands, a direct correlation exists between the water content and the amount of fines (particles smaller than 44 μm) and an inverse correlation exists between the bitumen content and the amount of fines. These relationships are successfully explained in terms of the irreducible water saturation in a porous medium and the double layer interaction between sand and bitumen surfaces.