X-ray tomographic microscopy of fibre-reinforced materials

Aluminium composites containing Al₂O₃ fibres and precipitates of various intermetallic phases are investigated by high-resolution computerized microtomography. Individual fibres 15 μm in diameter and intermetallic phases forming a network with about 15 μm mesh size have been imaged. The capabilities of the method and its further development down 1 μm and less spatial resolution are discussed.     

Evaluating the scope for energy-efficiency improvements in the public sector: Benchmarking NHSScotland's smaller health buildings

The National Health Service in Scotland (NHSScotland) has, in recent years, done much to reduce energy consumption in its major healthcare buildings (hospitals). On average, a reduction of 2% per year has been achieved since 2000, based on hospital buildings. However, there had been little or no attention paid to smaller premises such as health centres, clinics, dentists, etc. Such smaller healthcare buildings in Scotland constitute 29% of the total treated floor area of all NHSScotland buildings and, therefore, may contribute a similar percentage of carbon and other emissions to the environment. By concentrating on a sample of local health centres in Scotland, this paper outlines the creation of an energy benchmark target, which is part of a wider research project to investigate the environmental impacts of small healthcare buildings in Scotland and the scope for improvements. It was found that energy consumption varied widely between different centres but this variation could not be linked to building style, floor area or volume. Overall, it was found that a benchmark of 0.2 GJ/m³ would be challenging, but realistic.     

计算多轴拌器的轴功率

对三种搅拌器：锚式、螺旋式、锯齿式，在不同的转速配比下进行了轴功率测试，搅拌雷诺数为０．８～３０００００，液体的粘度为０．００１～８４Ｐａ．ｓ。液体的性质属牛顿型流体，试验过程用计算机控制．通过测量轴的扭矩来确定搅拌器的轴功率。实验测定了不同情况下搅拌器相互之间的影响。实验数据由马跨特计算方法确定模型参数并给出层流至湍流范围内三种搅拌器轴功率的计算公式．     

Heterotrophic growth and nutritional aspects of the diatom Cyclotella cryptica (Bacillariophyceae): Effect of some environmental factors

To investigate the nutritional value of the diatom Cyclotella cryptica (Reimann, Lewin, and Guillard) as an alternative feed for use in the aquaculture industry, the heterotrophic growth characteristics and resultant fatty acid profile of the microalga were studied when cultivated under a variety of controlled salinity and temperature conditions. In addition, the effects of pH on the growth characteristics were also studied. The maximum specific growth rate was affected by initial pH and cultivation temperature, but not by salinity. The optimal pH and temperature ranges for growth were 7.2 to 8.1 and 22.5 to 25.0 °C, respectively. Lipid accumulation and the fatty acid composition were also affected by cultivation temperature and salinity. The optimal temperature range and salinity level for lipid accumulation were 18.0 to 25.0 °C and 11.2 psu, respectively. In all cases the fatty acid distribution was similar, with the most abundant fatty acids being palmitic acid (16:0), palmitoleic acid (16:1 n-7), stearidonic acid (18:4 n-3, SDA), eicosapentaenoic acid (20:5 n-3, EPA), and decosahexaenoic acid (22:6 n-3, DHA).     

Mining Patterns from Change Logs to Support Reuse-Driven Evolution of Software Architectures

Modern software systems are subject to a continuous evolution under frequently varying requirements and changes in systems’ operational environments. Lehman’s law of continuing change demands for long-living and continuously evolving software to prolong its productive life and economic value by accommodating changes in existing software. Reusable knowledge and practices have proven to be successful for continuous development and evolution of the software effectively and efficiently. However, challenges such as empirical acquisition and systematic application of the reusable knowledge and practices must be addressed to enable or enhance software evolution. We investigate architecture change logs — mining histories of architecture-centric software evolution — to discover change patterns that 1) support reusability of architectural changes and 2) enhance the efficiency of the architecture evolution process. We model architecture change logs as a graph and apply graph-based formalism (i.e., graph mining techniques) to discover software architecture change patterns. We have developed a prototype that enables tool-driven automation and user decision support during software evolution. We have used the ISO-IEC-9126 model to qualitatively evaluate the proposed solution. The evaluation results suggest that the proposed solution 1) enables the reusability of frequent architectural changes and 2) enhances the efficiency of architecture-centric software evolution process. The proposed solution promotes research efforts to exploit the history of architectural changes to empirically discover knowledge that can guide architecture-centric software evolution.     

Relationship between age and risk taking among managers.

Administered a short version of N. Kogan and M. Wallach's (see pa, vol. 39:6826) choice-dilemma test to 1,484 managers from over 200 companies. Results show a significant negative relationship between age and both risk taking and the value placed upon risk. The relationships were small in size when individual scores were correlated with age, but increased markedly when mean scores were used. Furthermore, the relationships were relatively stable across items and across companies. Developmental and sociocultural mechanisms that might underlie these findings are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Long time reliability study of soldered flip chips on flexible substrates

Due to the requirements of new light, mobile, small and multifunctional electronic products the density of electronic packages continues to increase. Especially in medical electronics like pace makers the minimisation of the whole product size is an important factor. So flip chip technology becomes more and more attractive to reduce the height of an electronic package. At the same time the use of flexible and foldable substrates offers the possibility to create complex electronic devices with a very high density. In terms of human health the reliability of electronic products in medical applications has top priority.In this work flip chip interconnections to a flexible substrate are studied with regard to long time reliability. Test chips and substrates have been designed to give the possibility for electrical measurements. Solder was applied using conventional stencil printing method. The flip chip contacts on flexible substrates were created in a reflow process and underfilled subsequently.The assemblies have been tested according to JEDEC level 3. The focus in this paper is the long time reliability up to 10,000 h in thermal ageing at 125 °C and temperature/humidity testing at 85 °C/85% relative humidity as well as thermal cycling (0 °C/+100 °C) up to 5000 cycles. Daisy chain and four point Kelvin resistances have been measured to characterise the interconnections and monitor degradation effects.The failures have been analysed in terms of metallurgical investigations of formation and growing of intermetallic phases between underbump metallisation, solder bumps and conductor lines. CSAM was used to detect delaminations at the interfaces underfiller/chip and underfiller/substrate respectively.     

Statische Mischer und ihre Anwendung

Static mixers and their applications . Static mixers are generally made up of similar, fixed mixing units installed at right angles to each other in series along a tube or a channel. The energy of mixing is extracted from the flow. Twelve different units are presented. The mixing effect in static mixers under conditions of laminar flow is accomplished either by specially designed feed systems, by cutting and twisting, by displacement and distortion, or by separation and expansion. Depending upon the mixer, very different lengths are required to achieve the same degree of homogeneity. Compared with an empty tube, the pressure drop in static mixers is some 7-to 200-fold greater for laminar flow and 100- to 600-fold greater for turbulent flow. Static mixers are employed in all areas of chemical engineering for homogenization, for reduction of the resisdence-time spectrum, and for heat exchange. Since maintenance and wear are negligible, since incorporation frequently requires no extra space, and since they can be used over wide ranges of viscosity, static mixers are being increasingly employed in continuous processes.     

Law of substance separation on cross-flow filtration in turbulent flow

Cross-flow filtration is a filtration process for separation of a disperse phase from liquids. Suspension flows tangentially to a membrane and the filtrate is drawn off perpendicular to the direction of flow. Formation of a filter cake on the membrane is thus prevented, reduced, or its composition, modified. The principle of the separation is based on tow opposing effects: on the one hand, the particles are transported by the filtration flux to the membrane where they cause and increase in concentration; on the other hand, concentration differences are again reduced by the turbulence of the cross-flow and by Brownian motion of the particles. The two mechanisms compete with each other and depend upon particle size in different ways. An energetic comparison of the two effects yields the separation law of cross-flow filtration as a steady state solution of the Fokker-Planck equation. The separation law has an exponential form and assigns each particle size a separation probability with which it reaches the membrane. Once on the membrane the particles may form a filter cake, flow through the pores or return to the bulk flow. If the particles remain on the membrane the ranges of layer-free and cake-forming filtration can be calculated from the hydro-dynamic and geometric conditions of the cross-flow filter. Conventional cake filtration is regarded as limiting case. In continuous cross-flow filtration process a low separation probability through the filtration pressure on selection of the filter medium resistance.