We synthesized new composite particles for hydrogen storage on the basis of an idea of “particle designing”. As starting materials, powders of Mg and YNi2 were selected. Fine composite particles containing mainly Mg2Ni could be designed by repetitive hydriding and dehydriding cycles at 673 K. In the synthesis process of the composite particles, the following two points were found to be essential for this technique. The first point is that, after being activated by the sequential processes of hydrogenation, amorphization and disproportionation, YNi2 reacts effectively with Mg. The second point is that evaporated Mg, which occurs during dehydriding, adheres to the surface of the activated YNi2 and accelerates a diffusion reaction to form Mg2Ni at the interface. In these composite particles, Mg2NiH4 is formed, even at 373 K, under a hydrogen pressure of 5 MPa. 相似文献
The surface chemical states of the perovskite-type compounds, strontium doped lanthanum cobalt oxides (La1?xSrxCoO3), have been investigated using X-ray photoelectron spectroscopy (XPS). Catalytic oxidations of both methane and CO have also been investigated using flow methods. The chemical composition of the surface of La1?xSrxCoO3 was very different from that in the bulk, which was measured by X-ray fluorescence spectroscopy (XRFS). The catalytic activity of La1?xSrxCoO3 increased with an increase in the quantity of cobalt atoms on the surface. 相似文献
The demand for energy in Japan is expected to increase steadily into the future, and it seems that the importance of nuclear power generation will be heightened more when the situation of our country which is not rich in energy resources is taken into account.
Furthermore, when we consider the present situation that the light water reactors have become common, recent outlook for the supply and demand for uranium resources, trends in the development of the fast breeder reactor technology, etc., the light water reactors are expected to remain dominant in the nuclear power generation of our country until at least the second half of the 21st century.
Based on such a background five PWR utilities in Japan (Hokkaido, Kansai, Shikoku, Kyushu, and the Japan Atomic Power), and Mitsubishi Heavy Industries, Ltd. have jointly started researching the Next Generation PWR which is expected to be the leading nuclear power plant taking place of APWR. 相似文献
Polyarylates from substituted hydroquinones (HQs) and p-terphenyl-4,4″-dicarboxylic acid (TPDA) that were modified with 1,2-bis(phenoxy)ethane-4,4′-dicarboxylic acid (PEC), 1,2-bis(2-chlorophenoxy)ethane-4,4′-dicarboxylic acid (ClPEC), terephthalic acid (TA) and p-hydroxybenzoic acid (HBA) were prepared and their thermal and mechanical properties were investigated. These polyarylates exhibited liquid crystallinity at about the same temperatures as polyarylates derived from substituted HQs and 4,4′-diphenyldicarboxylic acid (BB). However, as-spun fibers and injection-molded specimens of these polyarylates exhibited lower moduli than those of substituted HQs and BB that were modified with PEC, Cl-PEC and TA. 相似文献
Active wustite (FeδO, with a δ value of 0.98) was prepared by keeping normal wustite (δ value of 0.94) in a N2 atmosphere at 300°C for 10 min. This reaction is given by (4δ2–3)Feδ1O→(4δ1–3)Feδ2O + (δ2–δ1)Fe3O4 where δ1= 0.94 and δ2= 0.98. The equation indicates that the normal wustite undergoes eutectoid decomposition into active wustite and stoichiometric magnetite (Fe3O4). Carbon dioxide (1.013 × 105 Pa) was almost completely (100%) decomposed into carbon (zero valence) by the active wustite at the low temperature of 300°C, which was associated with the transformation of the active wustite into the stoichiometric magnetite. The internal pressure of the reaction cell eventually became a vacuum. 相似文献
CO2 decomposition reaction into carbon was studied at 300 °C using the H2-reduced Zn(II)-bearing ferrite which consisted of the Zn(II) oxide and the active wüstite. The H2-reduced Zn(II)-bearing ferrite was prepared from Zn(II)-bearing ferrite by the reduction with H2 gas at 300 °C. The wüstite (FeO) in the H2-reduced Zn(II)-bearing ferrite had a higher value (=0.97, active wüstite) than those of the normal wüstites (0.90<<0.95) prepared at high temperatures (>570 °C). The decomposition reaction of CO2 proceeds in two steps: (1) CO2 reduction to CO, and (2) CO decomposition into carbon. In the initial stage, the reduction of CO2 into CO takes place, accompanying both the oxidation of the active wüstite to the slightly oxidized wüstite, and the transformation of active wüstite and Zn(II) oxide into the Zn(II)-bearing ferrite. After the reaction of the initial stage attains equilibrium of an apparent state of rest, the adsorbed CO is decomposed into carbon, associated with the transformation of the slightly oxidized wüstite and the Zn(II) oxide into the Zn(II)-bearing ferrite. 相似文献
Eight subjects participated in a subjective experiment of eight conditions to investigate the effects of heated seats in vehicles on skin temperature, thermal sensation and thermal comfort during the initial warm-up period. The experimental conditions were designed as a combination of air temperature in the test room (5, 10, 15, or 20 °C) and heated seat (on/off). The heated seat was effective for improving thermal comfort during the initial warm-up period when air temperature was lower than 15 °C. Use of heated seats prevented decreases in or increased toe skin temperature. Heated seats also increased foot thermal sensation at 15 and 20 °C. Optimal thermal sensation in contact with the seat was higher when air temperature was lower. Optimal skin temperature in contact with the seat back was higher than that with the seat cushion. Moreover, these optimal skin temperatures were higher when air temperature was lower. 相似文献
Examination of left ventricular (LV) diastolic dysfunction in hypertensive patients has been based on parameters obtained from the transmitral flow velocity during pulsed Doppler echocardiography. However, these parameters are affected by loading conditions. We evaluated LV diastolic function along the longitudinal and transverse axes by pulsed tissue Doppler imaging (TDI) in 50 hypertensive (HT) patients and 36 age-matched healthy volunteers (N). Transmitral flow velocity was recorded by pulsed Doppler echocardiography. LV posterior wall motion velocity along the longitudinal and transverse axes also was recorded by pulsed TDI. In both groups, peak early diastolic velocity of the LV posterior wall (Ew) along the transverse axis (N: 15.8+/-5.2 cm/s, HT: 12.2+/-4.4 cm/s) was higher than that along the longitudinal axis (N: 12.7+/-3.1 cm/s, HT: 9.5+/-3.3 cm/s). Peak atrial systolic velocity of the LV posterior wall (Aw) along the longitudinal axis (N: 9.1+/-1.8 cm/s, HT: 9.7 +/-2.6 cm/s) significantly exceeded that along the transverse axis (N: 8.0+/-2.2 cm/s, HT: 8.4+/-2.4 cm/s) in both groups. The Ews were lower and the Aws were higher along both axes in the patient group than in the control group. The time intervals from the aortic component of the second heart sound to the peak of the early diastolic wave (IIA-Ews) along both the transverse (N: 142+/-18 ms, HT: 154+/-19 ms) and longitudinal (N: 151 16 ms, HT: 162+/-20 ms) axes were longer in the patient group. In 29 patients, Ews along both axes correlated negatively (transverse: r = -0.80, P < .0001; longitudinal: r = -0.71, P < .0001) and IIA-Ews correlated positively (transverse: r = 0.81, P < .0001; longitudinal: r = 0.74, P < .001) with the time constant of the LV pressure decay during isovolumic diastole. The Aws along both axes in the 24 patients without pseudonormalization in transmitral flow velocity correlated positively (transverse: r = 0.60, P < .001; longitudinal: r = 0.74, P < .0001) with the LV end-diastolic pressure. In conclusion, LV relaxation and filling along the longitudinal and transverse axes were impaired in many patients with hypertension. Pulsed TDI was useful for evaluating LV diastolic dynamics in this disease. 相似文献