Analytical studies of four-inch pipe whip tests under BWR LOCA conditions

The purpose of pipe rupture studies in JAERI is to perform model tests on pipe whip, restraint behavior, jet impingement and jet thrust force, and to establish a computational method for analyzing these phenomena. This report presents the analytical results of 4-inch pipe whip tests under BWR LOCA conditions.Dynamic response analyses were performed using the general-purpose finite element program ADINA. The test pipe was modelled by straight beam elements and the four restraints were modelled by a single truss element. The analytical results were compared with the experimental results. Impact time and maximum total restraint force showed good agreement with experimental results. On the other hand, pipe strain and pipe deflection could not be predicted so well. The reason for this is that the sliding of the restraint during the pipe whip movement cannot be considered in the analyses.     

FDTD analysis of switching characteristics in magnetooptic functional devices using magnetostatic surface waves

Collinear magnetooptic interaction with magnetostatic surface waves (MSSW) can be used for wavelength‐selective switches, wavelength filters, and frequency shifters in wavelength‐division‐multiplexed (WDM) photonic networks and optical processing systems. The switching efficiency can be improved with a multilayer waveguide structure. To investigate the dynamic switching characteristics, the FDTD method was employed. The mode conversion between TE and TM mode was successfully demonstrated with FDTD simulation. The filtering characteristics were also evaluated. The FDTD results were compared with the result from the coupled mode theory, and good agreement was obtained. Switching of an optical pulse was also demonstrated by the FDTD method. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(1): 40–47, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20501     

Arraying needle-like TiO2 particles in a composite film by applying ac bias and its transmittance anisotropy

In an effort to improve energy-efficient windows, we experimented with a precursor slurry composite by using needle-like TiO₂ particles as the filler in a urethane matrix. Applying dc bias to the slurry failed to array the needle-like particles in the composite and to deposit on the film surface because of electrophoretic movement. However, applying ac bias of ±5 V to the precursor slurry composite for 12 h resulted in the needle-like TiO₂ particles being arrayed in the composite in a direction normal to the film surface. This resulted in an improvement in the energy efficiency of the material through an angular dependence of transmittance in the visible–near-infrared range.     

Threshold-voltage balance for minimum supply operation [LV CMOS chips]

The difference between the threshold voltages V/sub t/ of pMOS and nMOS transistors is a critical issue in the low-voltage operation of CMOS circuits. The pMOS/nMOS V/sub t/ balancing profit is analyzed in terms of subthreshold leakage current and the performance of CMOS LSIs and the minimum supply voltage of logic circuits. Matching the pMOS/nMOS V/sub t/ improves LSI performance and reduces the lowest supply voltage by 0.15 V. We propose a new concept of body bias management that uses forward biasing, fluctuation compensating, and V/sub t/ matching technologies to resolve the issue.     

Nitrogen Doping Effect in a-Ge: H Films Due To High Hydrogen Dilution

ＮｉｔｒｏｇｅｎＤｏｐｉｎｇＥｆｅｃｔｉｎａＧｅ：ＨＦｉｌｍｓＤｕｅＴｏＨｉｇｈＨｙｄｒｏｇｅｎＤｉｌｕｔｉｏｎＪ．Ｘｕ１Ｋ．Ｊ．Ｃｈｅｎ１Ｄ．Ｆｅｎｇ１，ＳｅｉｃｈｉＭｉｙａｚａｋｉ２ＭａｓａｔａｋａＨｉｒｏｓｅ２（１．Ｄｅｐｔ．ｏｆＰｈｙｓｉｃ...     

Photo-rechargeability of film electrodes prepared by pulsed laser deposition

The film electrodes of TiO₂, which have two functions of opto-electric conversion and storage of electrochemical energy, were prepared by pulsed laser deposition. To investigate the relationship between the photo-rechargeability and the surface structure, the TiO₂ film electrodes with different surface morphology were prepared by changing the inert gas pressure during the deposition. The photo-charged quantity was found to be proportional to the third power of the rms of surface roughness. The results suggest that not only the surface but also the interstices between crystal grains near the surface contribute to the photo-charging with low photo-emf.     

Wide-wavelength tunable lasers with 100 ghz fsr ring resonators

A widely tunable laser, consisting of a 100 GHz FSR triple-ring resonator and a semiconductor optical amplifier, is presented. The 100 GHz FSR ring resonator makes it possible to demonstrate 96 nm wavelength tuning with stable single-mode operation produced by a large threshold gain difference     

Analysis and Design of a Dynamic Predistorter for WCDMA Handset Power Amplifiers

This paper presents a dynamic predistorter (PD), which linearizes the dynamic AM-AM and AM-PM of a wideband code division multiple access handset power amplifier (PA). The dynamic PD allows an adjacent channel leakage power ratio (ACPR) improvement of 15.7 dB, which is superior to conventional PDs that linearize static AM-AM and AM-PM. The dynamic PD was designed using an HBT generating nonlinearity, a short circuit at the baseband (les4 MHz), and a load circuit for the HBT at the RF fundamental band (ap1.95 GHz). Volterra-series analysis was performed to understand the mechanism of the dynamic PD. The analysis revealed that the short circuit at the baseband enabled the dynamic PD generating third-order intermodulation distortion (IMD3) with opposite phase to the fundamental tone (i.e., antiphase IMD3). The antiphase IMD3 allows dynamic gain compression, which linearizes the dynamic gain expansion of a PA with low quiescent current. The analysis also revealed that the IMD3 amplitude of the dynamic PD can be adjusted by load impedance at the RF fundamental band, which enables the gradient of dynamic AM-AM and AM-PM to be optimized to linearize the PA. The fabricated two-stage InGaP/GaAs HBT PA module with the dynamic PD exhibited an ACPR of -40 dBc and a power-added efficiency of 50% at an average output power of 26.8 dBm with a quiescent current of 20 mA     

The Nanometer-Sized Eutectic Structure of Si/CrSi<Subscript>2</Subscript> Thermoelectric Materials Fabricated by Rapid Solidification

Nanostructuring is known to be an effective method to improve thermoelectric performance but, generally, it requires complex procedures and much labor. In the present study, self-assembled nanometer-sized composite structures of silicon (Si) and chromium disilicide (CrSi₂) were easily fabricated by the rapid solidification of a melt with a eutectic composition. Ribbon-like samples were obtained with a dominant nanostructure of fine aligned lamellae with a spacing range of 20–35 nm. The thermoelectric power factor of the ribbon was observed to be 1.2 mW/mK² at room temperature and reached 3.0 mW/mK² at 773 K. The thermal conductivity was 65% lower than that of a bulk eutectic sample. The results suggest that this method is promising for fabricating an effective nanostructure for thermoelectric performance.